Persulphate quenching of the excited state of ruthenium(II) tris-bipyridyl dication: thermal reactions

The rate constant for the reaction between the sulphate radical (SO₄^√−) and the ruthenium (II) tris-bipyridyl dication (Ru(bipy)₃²⁺) is (3.3±0.2)×10⁹ mol⁻¹ dm³ s⁻¹ in 1 mol dm⁻³ H₂SO₄ and (4.9±0.5)×10⁹ mol⁻¹ dm³ s⁻¹ in 0.1 mol dm⁻³, pH 4.7 acetate buffer. The SO₄^√−radical produced by the electron transfer quenching of Ru(bipy)₃^2+* by S₂O₈²⁻ reacts rapidly with both acetate buffer and chloride ions. These side reactions result in a reduction in the overall quantum yield of Ru(bipy)₃³⁺ production and reduced reaction selectivity when Ru(bipy)₃^2+* is quenched by persulphate.     

Transients and cooperative action of β-carotene, vitamin E and C in biological systems in vitro under irradiation

Using N^•₃ species as specific electron acceptor a defined ascorbate radical: AH^•↔A^•−+H⁺ (λ_max=360 nm, =3400 dm³ mol⁻¹ cm⁻¹) is observed. The attack of DMSO^•+ on vit.E results in a vit.E^• radical (k=1×10⁹ dm³ mol⁻¹ s⁻¹; λ_max=425 nm, =2400 dm³ mol⁻¹ cm⁻¹; 2k=4.7×10⁸ dm³ mol⁻¹ s⁻¹). Vit.E-acetate leads to the formation of a radical cation (vit.E-ac^•+). β-carotene reacts also with DMSO^•+ forming a radical cation, β-car^•+ (k=1.75×10⁸ dm³ mol⁻¹ s⁻¹; λ_max=942 nm, =14 600 dm³ mol⁻¹ cm⁻¹), which probably leads to the formation of a dimer radical cation, (β-car)^•+₂ (k=2.5×10⁷ dm³ mol⁻¹ s⁻¹).

Using E.coli bacteria (AB1157) as a model system in vitro it was found that all three vitamins are rather efficient radiation protecting agents. They can also increase the activity of cytostatica, e.g., mitomycin C (MMC), by electron transfer process. The mixture of vit.E-ac and β-car acts contradictory, but adding vit.C to it a strong cooperative enhancement of the MMC activity is observed once again. A relationship between the pulse radiolysis and the radiation biological data is found and discussed. A possible explanation of the previously reported trials concerning the role of vit.E and β-car on the increased occurence of lung and other types of cancer in smokers and drinkers is presented.     

One-electron oxidation of mitomycin C and its corresponding peroxyl radicals. A steady-state and pulse radiolysis study

The one-electron oxidation of Mitomycin C (MMC) as well as the formation of the corresponding peroxyl radicals were investigated by both steady-state and pulse radiolysis. The steady-state MMC-radiolysis by OH-attack followed at both absorption bands showed different yields: at 218 nm G_i (-MMC) = 3.0 and at 364 nm G_i (-MMC) = 3.9, indicating the formation of various not yet identified products, among which ammonia was determined, G(NH₃) = 0.81. By means of pulse radiolysis it was established a total κ (OH + MMC) = (5.8 ± 0.2) × 10⁹ dm³ mol⁻¹ s⁻¹. The transient absorption spectrum from the one-electron oxidized MMC showed absorption maxima at 295 nm (ε = 9950 dm³ mol⁻¹ cm^t-1), 410 nm (ε = 1450 dm³ mol⁻¹ cm⁻¹) and 505 nm ( ε = 5420 dm³ mol⁻¹ cm⁻¹). At 280–320 and 505 nm and above they exhibit in the first 150 μs a first order decay, κ₁ = (0.85 ± 0.1) × 10³ s⁻¹, and followed upto ms time range, by a second order decay, 2κ = (1.3 ± 0.3) × 10⁸ dm³ mol^-1 s⁻¹. Around 410 nm the kinetics are rather mixed and could not be resolved.

The steady-state MMC-radiolysis in the presence of oxygen featured a proportionality towards the absorbed dose for both MMC-absorption bands, resulting in a G_i (-MMC) = 1.5. Among several products ammonia-yield was determined G(NH₃) = 0.52. The formation of MMC-peroxyl radicals was studied by pulse radiolysis, likewise in neutral aqueous solution, but saturated with a gas mixture of 80% N₂O and 20% O₂. The maxima of the observed transient spectrum are slightly shifted compared to that of the one-electron oxidized MMC-species, namely: 290 nm (ε = 10100 dm³ mol⁻¹ cm⁻¹), 410 nm (ε = 2900 dm³ mol⁻¹ cm⁻¹) and 520 nm (ε = 5500 dm³ mol⁻¹ cm⁻¹). The O₂-addition to the MMC-one-electron oxidized transients was found to be at 290 to 410 nm gk(MMC·OH + O₂) = 5 × 10⁷ dm³ mol⁻¹ s⁻¹, around 480 nm κ = 1.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and at 510 nm and above, κ = 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The decay kinetics of the MMC-peroxyl radicals were also found to be different at the various absorption bands, but predominantly of first order; at 290–420 nm κ₁ = 1.5 × 10³ s⁻¹ and at 500 nm and above, κ = 7.0 × 10³ s⁻¹.

The presented results are of interest for the radiation behaviour of MMC as well as for its application as an antitumor drug in the combined radiation-chemotherapy of patients.     

Nitrate ion-sensitive field effect transistor based on bis(bathocuproin)-copper(I) nitrate dissolved in solid solvents

Nitrate-selective ion-sensitive field effect transistors (ISFETs) were prepared by dip-coating the silica gate insulator surface with an ion exchanger based on bis(bathocuproin)-copper(I) nitrate in a molten mixture of docosan 1-ol and Triphenylphosphate. This sensor showed a linear response from 10⁻¹ mol dm⁻³ to at least 10⁻⁵ mol dm⁻³ and maintained its response characteristics for as long as 5 weeks. The selectivity sequence for common anions such as Cl0−₄ and Cl− followed the conventional Hofmeister series. This sensor was applied to rain water analysis.     

Determination of absorptivity and formation constant of a chalcone association complex

A UV spectrometric method was developed to determine the molar absorptivity (_C) and formation constant (K_c) of the association complex of unsubstituted chalcone in cyclohexane, in the concentration range from 4.00·10⁻⁴ to 2.00·10⁻² mol dm⁻³. The thermodynamic and spectroscopic magnitudes such as K_c and _C contribute to the understanding of the physicochemical behavior of several ,β-unsaturated carbonylic compounds, of low solubility in water, as it is the case of numerous flavonoids of chemical and biological importance. The studied association complex, formed by two chalcone molecules, is characterized by the constants _C (300.8 nm)=4.98·10⁴ dm³ mol⁻¹ cm⁻¹ and K_c=5.58·10³. The method proposed is convenient for the study of solute–solute molecular associations particularly those due to dipole–dipole interactions.     

Pulse radiolysis of epicatechin in aqueous solution

Pulse radiolysis of epicatechin in aqueous solution has been done to investigate the reactions of epicatechin derived phenoxy radical (EpO) at neutral pH. EpO was generated by N₃ reacting toward EpOH, the rate constant was measured to be 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The biomolecular termination of EpO is rather slow ((2k < × 10⁶ dm³ mol⁻¹ s⁻¹) and results in products exhibiting strong visible absorption around 450 nm. No reactions have been observed for EpO with O₂ and O₂ in the time scale of pulse radiolysis (0.01 s), suggesting the bimolecular rate constant are less than 10⁴ and 5 × 10⁶ dm³ mol⁻¹ s⁻¹, respectively.     

First steps in radiation-induced hydrogel synthesis: radical formation and oligomerization in dilute aqueous N-isopropylacrylamide solutions

The reactions of hydroxyl radical, hydrogen atom and hydrated electron intermediates of water radiolysis with N-isopropylacrylamide (NIPAAm) were studied by pulse radiolysis in dilute aqueous solutions. OH, H and e_aq⁻ react with NIPAAm with rate coefficient of (6.9±1.2)×10⁹, (6.6±1)×10⁹, and (1.0±0.2)×10¹⁰ mol⁻¹ dm³ s⁻¹. In OH and H radical addition to the double bond mainly -carboxyalkyl type radicals form, (OHCH₂CH^√C(N-i-C₃H₇)O and CH₃CH^√C(N-i-C₃H₇)O). In reaction of e_aq⁻ oxygen atom centered radical anion is produced (CH₂CHC^√(N-i-C₃H₇)O⁻), the anion undergoes reversible protonation with pK_a=8.7. There is also an irreversible protonation on the β-carbon atom that produces the same radical as forms in H atom reaction (CH₃CH^√C(N-i-C₃H₇)O). The -carboxyalkyl type radicals at low NIPAAm concentration (0.1–1 mmol dm⁻³) mainly disappear in self-termination reactions, 2k_t,m=8.4×10⁸ mol⁻¹ dm³ s⁻¹. At higher concentrations the decay curves reflect the competition of the self-termination and radical addition to monomer (propagation). The termination rate coefficient of oligomer radicals containing a few monomer units is 2k_t≈2×10⁸ mol⁻¹ dm³ s¹.     

Fast and highly selective determination of cyanide with 2,2-dihydroxy-1,3-indanedione

A very simple, accurate, fast, selective and sensitive assay of cyanide based on its reaction with 2,2-dihydroxy-l,3-indanedione at basic pH is proposed. As little as 0.01 μg ml⁻¹ of cyanide can be determined. The molar absorptivity may reach 5.1–8.0×10⁴ l mol⁻¹ cm⁻¹ depending on the reaction conditions. Thus, 1 ml of sample solution is mixed with 500 μl of 5 mg ml⁻¹ solution of 2,2-dihydroxy-1,3-indanedione monohydrate in 2% sodium carbonate. The absorbance of the purple color is measured at 510 nm in 1-cm glass cuvettes, 10–15 min after mixing the reagents. The procedure could also be used to identify free CN⁻ in natural waters and hydrocyanic acid in the environment.     

Generation of discharges in dynamic foam for oxidants formation using various types of electrodes

An innovatory apparatus for the discharge generation in foaming conditions was constructed. The main goal of the research was to obtain various kinds of oxidants, useful in Advanced Oxidation Processes (AOP) in one compact reactor, potentially even in the treated medium. Such an application of dynamic foam, created without the addition of surfactant has not been investigated as yet. To find the optimum conditions for the efficient foam generation and the discharge development and moreover, to assure the presence of oxidants in sufficient concentrations several electrode materials and electrode set-ups were tested. The experiments were done in the metal plate-to-metal plate, metal plate-to-dielectric plate, needles-to-metal plate and needles-to-dielectric plate electrodes’ set-ups. The discharge gap space ranged from 4 mm in the case of plate-to-plate electrodes to 7 mm in the case of needles-to-plate electrodes. Generally, the highest oxidants’ concentrations at the highest comparable gas flow rate were obtained in the needles-to-dielectric plate arrangement, where 521 and 875 ppm of gaseous ozone, 0.36 and 0.5 mg dm⁻³ of dissolved ozone and 59 and 62 mg dm⁻³ of hydrogen peroxide were obtained at 14 kV of applied voltage and at 5 dm³ min⁻¹ of the substrate gas flow in air and oxygen, respectively. The presence of OH radicals was confirmed by the spectroscopic measurements. The larger gap size was more advantageous from the foam formation point of view and the dielectric layer assured more uniform spatial discharge development between the electrodes.     

Calorimetric study of inhibition of urease by 2-mercaptoethanol Procedures based upon integrated rate equations

Urease-catalyzed hydrolysis of urea was studied in the absence, and presence, of 0.3 and 0.8 mmol dm⁻³ 2-mercaptoethanol in phosphate buffer at pH 7.0 at 25°C with the use of an isoperibol calorimeter. The extent of reaction with time, ΔT vs. t, was interpreted with the help of the integrated Michaelis–Menten equation, and the inhibition constant K_i was obtained from linear transformations of the equation (Jennings–Niemann, Yun–Suelter and Booman–Niemann). The obtained value of K_i was equal to 0.87±0.10 mmol dm⁻³.     

Mechanistic study and kinetic determination of vitamin C employing the sequential injection technique

For the first time, the robust sequential injection (SI) technique has been employed for full kinetic investigation of the oxidation reaction of vitamin C. Iron(III) in sulphuric acid media was used as an oxidant and 1,10-phenanthroline as an indicator and the resulting solution of tris 1,10-phenanthroline-iron(II) complex was monitored spectrophotometrically at 510 nm. The reaction orders with respect to each reagent were determined by the SI-technique and were found to be 1, 1, and −1 for vitamin C, iron(III) and hydrogen ions respectively. On the basis of these values a rate law was developed and a plausible mechanism was established. A kinetic method for the analysis of vitamin C in drug formulations based on the results obtained above was thus validated. The drug in the range 20–300 ppm was determined by the kinetic method using 1.6×10⁻³ mol dm⁻³ ammonium ferric sulphate in 0.02 mol dm⁻³ sulphuric acid with the aspiration volume of 944 μl and the fixed-time of 180 s. The results thus obtained by the SI-kinetic method were statistically compared with those obtained by the British Pharmacoebia standard method and found to be accurate, precise and fast.     

Applications of enzyme-catalysed reactions in trace analysis-II Determination of cyanide, sulphide, and iodine with invertase

Methods are described for the determination of cyanide (10⁻⁸–10⁻⁵M and sulphide (10⁻⁷–10⁻⁵ M) based on the de-inhibitory effect of these ions on invertase inhibited by mercury(II) or by silver. Iodine (0.1–3 μg) may be determined by its inhibition of invertase.     

On-line determination of cyanide in the presence of sulfide by flow injection with pervaporation

A pervaporation-flow injection (PFI) method is described for the analysis of cyanide in the presence of sulfide. The interfering sulfide ion in the injected sample is precipitated on-line using an acidified lead nitrate reagent solution before the donor stream enters the pervaporation cell. Using amperometric detection at a silver electrode set at −50 mV (vs Ag/AgCl), linear calibration was obtained in the range 0.02–100.0 mg l⁻¹ with a detection limit of 1.0 μg l⁻¹. Sample throughput was of the order of 12–15 h⁻¹. When the method was applied to the analysis of synthetic samples, there was no significant interference from sulfide at concentrations up to 50 mg l⁻¹. Thiocyanate did not interfere at levels up to 1000 mg l⁻¹. When applied to industrial samples containing sulfide and thiocyanate ions where the cyanide ions are predominantly complexed with various metal ions the PFI method was found to give results close to those obtained by standard distillation methods for weak acid dissociable (WAD) cyanide.     

Amberlite XAD-2 functionalized with o-aminophenol: synthesis and applications as extractant for copper(II), cobalt(II), cadmium(II), nickel(II), zinc(II) and lead(II)

A stable chelating resin matrix was synthesized by covalently linking o-aminophenol (o-AP) with the benzene ring of the polystyrene–divinylbenzene resin, Amberlite XAD-2, through a –N=N– group. Elemental analyses, thermogravimetric analysis (TGA) and infrared spectra have characterized the resulting chelating resin. It has been used to preconcentrate Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺ and Pb²⁺, prior to their determination by flame atomic absorption spectrometry. The optimum pH values for quantitative sorption of Cu, Cd, Co, Ni, Zn and Pb are 6.2–7.4, 5.6–7.2, 5.6–9.0, 6.0–9.0, 5.7–7.0 and 5.0–6.0, respectively. These metals are desorbed (recovery 91–98%) with 4 mol dm⁻³ HNO₃. The sorption capacity of the resin is 3.37, 3.42, 3.29, 3.24, 2.94 and 3.32 mg of metal g⁻¹ of resin, respectively, for Cu, Cd, Co, Ni, Zn and Pb. The effect of NaF, NaCl, NaNO₃, Na₂SO₄, and Na₃PO₄ on the sorption of these metal ions has been investigated. These electrolytes are tolerable up to 0.01 mol dm⁻³ in case of all the metal ions, except Cl⁻ which is tolerable even up to 0.1 mol dm⁻³ for Zn and 1.0 mol dm⁻³ for Pb. The preconcentration factor for Cu, Cd, Co, Ni, Zn and Pb are 50, 50, 100, 65, 40 and 40 (concentration level 10–25 μg dm⁻³) respectively. Simultaneous enrichment of the six metals is possible. The method has been applied to determine Cu, Cd, Co, Ni, Zn and Pb content in well water samples (RSD≤8%).     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.     

Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

Determination of cyanide using flow-injection multisensor system

A flow-injection multisensor system (FIMS) comprising potentiometric sensors of different types for determination of free cyanide activity in basic solutions for extraction of noble metals was developed. The solvent polymeric membrane sensors based on metalloporphyrin and crystalline sensors were combined in the sensor system. The system allowed determination of cyanide activity in the range 10⁻⁴–1 mol l⁻¹ with an error less than 5% in individual cyanide solutions and acceptable precision (about 20%) in process liquids. The system was able to analyse up to 20 samples per h. The FIMS was also applied to detecting of silver ions in the presence of cyanide. Chalcogenide glass sensor was used as the detector that ensured the precision of 20%.     

Differential-pulse voltammetric determination of low μg l cyanide levels using EDTA, Cu(II) and a hanging mercury drop electrode

The proposed method for cyanide determination at the ultratrace level by differential pulse voltammetry is based in the sensitivity enhancement obtained when both Cu(II) and EDTA are present in the background electrolyte. Comparison of the detection limits and linear dynamic ranges using the conventional borate (pH 9.75), and the proposed borate-EDTA–Cu(II) background electrolytes was carried out. Best results have been obtained with the addition of 0.5 mmol l⁻¹ EDTA and 0.02 mmol l⁻¹ of Cu(II), which allow a detection limit of 1.7 μg l⁻¹ CN⁻ (65 nmol l⁻¹ — absolute detection limit 34 ng) with a precision better than ±2% for a 40 μg l⁻¹ level. Calibration range extended from detection limit up to 100 μg l⁻¹. Cyclic voltammetry indicates that the measured cyanide peak is obtained when the electrogenerated CuCN adsorbed onto the hanging mercury drop electrode surface, is oxidised at positive going potential scan. The method has been successfully applied to various industrial waste waters such as metal-finishing waste waters, water/sand mixtures from cleaning processes of coke production, leachates from wastes obtained from electrolytic cells of aluminium production, and liquors from gold extraction industry. Results obtained by the proposed method showed good agreement with those obtained by the standard methods (ion-selective potentiometry and the spectrophotometric pyridine method).     

Influence of non-covalent interactions on the thermodynamic stereoselectivity of the protonation of some dipeptides

ΔG⁰, ΔH⁰ and ΔS⁰ protonation values of some pairs of diastereoisomeric dipeptides have been determined by potentiometry and calorimetry in aqueous solution at 25°C and I = 0.1 mol dm⁻³ (KNO₃). On the basis of the results obtained it has been possible to assess the role played by two different non-covalent interactions, namely the electrostatic interaction and the solvophobic interaction, on the thermodynamic stereoselectivity in the proton complex formation, shown by the systems investigated.     

Application of Ag2X (X = SO3, Cr2O7, C2O4 and CO3) solid-phase reagents for indirect determination of cyanide in the industrial effluent using FIA-FAAS system

Four solid-phase reagents have been tested for indirect determination of cyanide using flow injection analysis-flame atomic absorption spectrometry (FIA-FAAS). The method is based on insertion of aqueous cyanide solutions into an on-line Ag₂X (where X are SO₃²⁻, Cr₂O₇²⁻, C₂O₄²⁻ and CO₃²⁻) packed column (25%, m/m suspended on silica gel beads) and re-distilled water or sodium hydroxide are used as the carrier stream. The eluent containing the analyte as silver cyanide complexes, produced from reaction between Ag₂X and cyanide, measured by flame atomic absorption spectrometry. The method is simple, fast and selective than other published FIA procedures. A relative standard deviation (R.S.D.) better than 1.12% was obtained in a repeatability study. The method was applied to the determination of cyanide in industrial electrolytic baths.