Electromagnetic properties and microwave absorption of W-type hexagonal ferrites doped with La

W-type barium hexaferrites with compositions of Ba₁Co_0.9Zn_1.1Fe₁₆O₂₇ and Ba_0.8La_0.2Co_0.9Zn_1.1Fe₁₆O₂₇ were synthesized by the sol-gel method. The electromagnetic properties and microwave absorption behavior of these two ferrites were studied in the 2-18 GHz frequency range. The microstructure and morphology of the ferrites were characterized by X-ray diffraction (XRD), and scanning electron microscopy (SEM) techniques. The complex permittivity spectra, the complex permeability spectra and microwave reflection loss were measured by a microwave vector network analyzer. The XRD patterns show that the main phase of the Co₂W ferrite forms without other intermediate phases when calcined at 1200 °C. The SEM images indicate that flake-like hexagonal crystals distribute uniformly in the materials. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the W-type barium hexaferrites. The microwave absorption property of the La³⁺ doping W-type hexaferrite sample is enhanced with the bandwidth below −10 dB around 8 GHz and the peak value of reflection loss about −39.6 dB at the layer thickness of 2 mm.     

Effect of Ag substitution on the electromagnetic property and microwave absorption of LaMnO3

La_1−xAg_xMnO₃ perovskites with different doping Ag-content were prepared by the sol–gel method. The electromagnetic characteristics and microwave loss behavior of these ion-doped rare-earth manganites were studied in the 2–18 GHz frequency range. The microstructure and morphology of the samples were characterized by X-ray diffraction (XRD), and scanning electron microscopy (SEM) techniques. The complex permittivity spectra, the complex permeability spectra and microwave reflection loss were measured by a microwave vector network analyzer system. The XRD patterns show that the crystalline perovskite main phase ABO₃ is formed and impurity phases disappear when calcined at 1100 °C, and Ag metal as an impurity phase appears when excessive Ag⁺ is doped. The SEM image indicates that many of the La_0.85Ag_0.15MnO₃ particles are fiber-like or ellipsoidal. Magnetic loss and dielectric loss coexist and cooperate in microwave attenuation by moderate substitution of Ag⁺ for La³⁺. The microwave absorption property of the La_0.85Ag_0.15MnO₃ sample is enhanced with the bandwidth below −10 dB at about 6 GHz and the peak value of reflection loss is near −25.0 dB at the layer thickness of 2 mm.     

Pr-substituted W-type barium ferrite: Preparation and electromagnetic properties

The W-type ferrites doped with Pr³⁺, BaCoNiPr_xFe_16−xO₂₇ (x=0-0.20), were prepared by a sol-gel method. The structure and electromagnetic properties of the samples are studied using powder X-ray diffraction, field emission scanning electron microscope, vibrating sample magnetometer and vector network analyzer. All the samples are hexagonal platelet-like W-type barium ferrite. These synthesized samples exhibit paramagnetism and strong magnetism. The saturation magnetization (Ms) increases with the increase of Pr³⁺ content. The real part of complex permittivity (ε′) decreases and the imaginary part (ε″) increases with Fe³⁺ replaced by Pr³⁺. The imaginary part of complex permittivity (μ″) increases and the real part (μ′) decreases after Pr³⁺ is doped. Furthermore, the doped Pr³⁺ improves the microwave absorbency.     

Synthesis and magnetic properties of La-substituted M-type Sr hexaferrites

Single-phase M-type hexagonal ferrites Sr_1−xLa_xFe₁₂O₁₉ (0≤x≤1) were prepared by a ceramic route. The stability limits of the ferrite phases were determined with a combination of various microscopy techniques, electron-probe micro-analysis, powder X-ray diffraction and thermal analysis. SrFe₁₂O₁₉ (x=0) is stable up to 1420 °C, whereas LaFe₁₂O₁₉ (x=1) exists between 1360 and 1400 °C only. The lattice parameters of Sr_1−xLa_xFe₁₂O₁₉ exhibit a linear variation with x, i.e. a₀ slightly increases and c₀ decreases with x, leading to a decrease of the unit cell volume with x. The saturation magnetization at T=5 K decreases with increasing La concentration. Room temperature Mössbauer analysis shows that the Fe³⁺/Fe²⁺ valence change occurs in the 2a sites for the whole composition range.     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

Effect of Pr doping on magnetic and dielectric properties of Ni-Zn ferrites by “one-step synthesis”

Pr³⁺-doped Ni-Zn ferrites with a nominal composition of Ni_0.5Zn_0.5Pr_xFe_2−xO₄ (where x=0-0.08) were prepared by a one-step synthesis. The magnetic and dielectric properties of the as-prepared Ni-Zn ferrites were investigated. X-ray diffraction data indicated that, after doping, all samples consisted of the main spinel phase in combination of a small amount of a foreign PrFeO₃ phase. The lattice constants of the ferrites initially increased after Pr³⁺ doping, but then became smaller with additional Pr³⁺ doping. The addition of Pr³⁺ resulted in a reduction of grain size and an increase of density and densification of the as-prepared samples. Magnetic measurement revealed that the saturation magnetization of the as-prepared ferrites, M_s, decreased, while the coercivity, H_c, increased with increasing substitution level, x, and the Curie temperature, T_c, kept a rather high value, fluctuating between 308 and 320 °C. Both the real and imaginary parts of permeability of the ferrites decreased slightly after Pr³⁺ doping. However, the natural resonance frequency shifted towards higher frequency from 13.07 to 36.17 MHz after the addition of Pr³⁺, driving the magnetic permeability to much higher frequency, reaching the highest value (36.17 MHz) when x=0.04. Introduction of Pr³⁺ ions into the Ni-Zn ferrite reduced the values of the dielectric loss tangent, especially in the frequency range of 1-400 MHz. However, the magnitude of dielectric loss of the samples doped with different amounts of Pr³⁺ raised little.     

Doping effect of Y ions on the microstructural and electromagnetic properties of Mn-Zn ferrites

Mn-Zn ferrites doped with different contents of Y³⁺ ions were prepared by conventional two-step synthesis method. The microstructure and electromagnetic properties of the as-prepared Mn-Zn ferrites were investigated. It was found that all the samples consisted of ferrite phases of typical spinel cubic structure, and when Y³⁺ ion content was upto 1.5 mol%, yttriumirongarnet (Y₃Fe₅O₁₂) phase with garnet structure was detected. With increasing doping content of Y³⁺ ions, the lattice constant and grain size increased, and after an increase to its maximum value, the sample apparent and relative densities dropped down. Through the analysis of magnetic properties, it was revealed that the saturation magnetization, and both the real and imaginary parts of permeability of the as-prepared samples raised with increasing doping content of Y³⁺ ions but decreased with more Y³⁺ ions, while their coercivity showed an opposite change trend; and the Curie temperature increased monotonously. The measurement of dielectric properties indicated that the dielectric constant of the doped Mn-Zn ferrites presented a rise with increasing Y³⁺ ion content, and dropped down gradually when more Y³⁺ ions were doped, while the dielectric loss tangent would decrease with Y³⁺ content upto 1.5 mol%, but after that, it increased.     

Complex permittivity and complex permeability of Sr ions substituted Ba ferrite at X-band

M-type hexagonal ferrite composition, Ba_(1−x)Sr_xFe₁₂O₁₉ (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0), was prepared by a two route ceramic method. Complex permittivity (ε′−jε″) and complex permeability (μ′−jμ″) have been measured using a network analyzer from 8.2 to 12.4 GHz X-ray diffraction confirmed the M-type hexagonal structure and a scanned electron micrograph was used to analyze the grain size distribution of ferrite. Substitution of Sr²⁺ ions causes an increase in porosity that deteriorates the electromagnetic and microstructural properties in the doped samples. Both dielectric constant and dielectric loss are enhanced in comparison to the permeability and magnetic loss over the entire frequency region. This is due to a resistivity variation and the formation of Fe²⁺ ions, which increases the hopping mechanism between Fe²⁺ and Fe³⁺ ions.     

Investigation of crystallographic sites of Eu in La2BaZnO5 by site-selective laser-excitation spectroscopy

La₂BaZnO₅:Eu³⁺ (0.05 mol%) was prepared by a solid-state reaction at high temperature. X-ray powder diffraction analysis confirmed the formation of single phase La₂BaZnO₅. Luminescence properties of La₂BaZnO₅:Eu³⁺ are investigated by site-selective laser-excitation and emission spectroscopy at 18 K. Two different crystallographic sites for Eu³⁺ corresponding to the La³⁺ and Ba²⁺ sites are identified from the ⁷F₀→⁵D₀ excitation spectra obtained by monitoring the ⁵D₀→⁷F_J (J=1, 2, …, 6) emissions. It is found that Eu³⁺ substituted for the Ba²⁺ ion experiences stronger crystal-field strength than Eu³⁺ substituted for the La³⁺ ion. Energy transfer between the two crystallographic Eu³⁺ centers is investigated by luminescence decay curves at 18 K.     

White light-emitting diodes using blue and yellow-orange-emitting phosphors

A blue-emitting phosphor, BaMgAl₁₀O₁₇:Eu²⁺ (BAM) and a yellow-orange phosphor, Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ were prepared by the solid-state reaction. Excitation and emission spectra results showed that BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ can be efficiently excited by near-ultraviolet (n-UV)-visible light from 250 to 440 nm. The effects of the doped-Eu²⁺ concentration in BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ on the photoluminescence were investigated in detail. White light-emitting diodes (LED) was obtained by combining n-UV LED chip (GaN-based 380 nm emitting) with BaMgAl₁₀O₁₇:0.09Eu²⁺ and 0.1Ba²⁺-codoped Sr₃SiO₅: 0.2Eu²⁺ phosphors with the characteristic of color-rendering index of 86, CIE chromaticity coordinates (x,y) of (0.3216,0.3096), and color temperature T_c of 5700 K. As the current increases, the relative intensity simultaneously increases. The CIE chromaticity coordinates (x,y) of the white LED tends to decrease. The correlated color temperature T_c increases from 4100 to 7500 K and the color-rendering index R_a increases from 82 to 87 simultaneously.     

The magnetoelectric coupling in rhombohedral–tetragonal phases coexisted Bi0.84Ba0.20FeO3

Ba doped Bi_1.04−xBa_xFeO₃ ceramics with x up to 0.30 have been prepared by the tartaric acid modified sol–gel method. The X ray diffraction patterns show that the structure transforms from rhombohedral to tetragonal with increasing the Ba substitution concentration from 10% to 30% and the coexistence of distorted rhombohedral and tetragonal phases in 20% Ba substituted BiFeO₃, which was further confirmed by the Raman spectra. Bi_0.84Ba_0.20FeO₃ exhibits the highest magnetization (1.6 emu/g under magnetic field of 12 kOe) compared with the other samples of different Ba substitution concentration. Significant enhancement of the ferroelectricity has been observed in 20% and 30% Ba substituted BiFeO₃ with saturate polarization close to 6.6 μC/cm² for Bi_0.74Ba_0.30FeO₃. The magnetoelectric coupling of Bi_0.84Ba_0.20FeO₃ has been measured and the maximum decrease of magnetization under magnetic field of 9.8 kOe was about 0.06 emu/g with increasing applied electric field to 11 kV/cm, and the magnetoelectric coefficient is 1.5×10⁻¹² s/m.     

Glass additive influence on the sintering behavior, microstructure and microwave magnetic properties of Cu-Bi-Zn co-doped Co2Z ferrites

The Bi₂O₃-B₂O₃-ZnO-SiO₂ (BB35SZ) glass effects on the sintering behavior and microwave magnetic properties of Cu-Bi-Zn co-doped Co₂Z ferrites were investigated to develop low-temperature-fired ferrites. The glass wetting characteristics on the Co₂Z ferrite surface, X-ray diffractometer, scanning electron microscopy and a dilatometer were used to examine the BB35SZ glass effect on Co₂Z ferrite densification and the chemical reaction between the glass and Co₂Z ferrites. The results indicate that BB35SZ glass can be used as a sintering aid to reduce the densification temperature of Co₂Z ferrites from 1300 to 900 °C. 3(Ba_0.9Bi_0.1O)·2(Co_0.8Cu_0.2O)·12(Fe_1.975Zn_0.025O₃) ferrite with 2 wt% BB35SZ glass can be densified below 900 °C, exhibiting an initial permeability of 3.4. This process provides a promising candidate for multilayer chip magnetic devices for microwave applications.     

Microwave absorbing properties of rare-earth elements substituted W-type barium ferrite

W-type barium ferrites Ba(MnZn)_0.3Co_1.4R_0.01Fe_15.99O₂₇ with R=Dy, Nd and Pr were prepared by chemical coprecipitation method. Effects of rare-earth elements (RE) substitution on microstructural and electromagnetic properties were analyzed. The results show that a small amount of RE³⁺ ions can replace Fe³⁺ ions and adjust hyperfine parameters. An obvious increase in natural resonance frequency and high frequency relaxation, and a sharp decrease for complex permittivity have been observed. Furthermore, the matching thickness and the reflection loss (RL) of one-layer ferrite absorber were calculated. It reveals that thin and broad-band can be obtained by RE-substitution. But only when the magnetic moment of RE³⁺ is higher than that of Fe³⁺, can substitution be effective for higher RL. Dy-substituted ferrite composite has excellent microwave absorption properties. The frequency (with respect to −10 dB RL) begins from 9.9 GHz, and the bandwidth reaches far more than 8.16 GHz. The peak value is −51.92 dB at a matching thickness of 2.1 mm.     

Synthesis and luminescence properties of europium doped YBa3B9O18

Europium (Eu³⁺) doped YBa₃B₉O₁₈ were synthesized by conventional solid state solidification methods. (Y_1−xEu_x)Ba₃B₉O₁₈ formed solid solutions in the range of x=0–1.0. The luminescence property measurements upon excitation in ultraviolet–visible range show well-known Eu³⁺ excitation and emission. The charge transfer excitation band of Eu³⁺ dominates the excitation spectra. The emission spectrum of Eu³⁺ ions consists mainly of several groups of lines in the 550–720 nm region, due to the transitions from the ⁵D₀ level to the levels ⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions. The dependence of luminescence intensity on Eu³⁺ concentration shows no concentration quenching for fully concentrated EuBa₃B₉O₁₈. Eu³⁺ doped YBa₃B₉O₁₈ are promising phosphors for applications in displays and optical devices.     

Influence of Sm-substitution on structure and electromagnetic properties of Ba3−xSmxCo2Fe24O41 powders

Sm-substituted barium hexaferrites, Ba_3−xSm_xCo₂Fe₂₄O₄₁ (x=0-0.25), were prepared by a conventional ceramic sintering method. The microstructure, complex permittivity, complex permeability and static magnetic properties of the samples were studied using powder X-ray diffraction, field emission scanning electron microscopy, vector network analyzer and vibrating sample magnetometry. The results reveal that by introducing a relatively small amount of Sm³⁺ instead of Ba²⁺ an important modification of both structure and high-frequency electromagnetic properties can be obtained. Doping of Sm³⁺ suppressed the grain growth and gave rise to a decrease of the grain size. As the Sm content increases, the static magnetic properties continuously increase. The real part and imaginary part of complex permittivity initially increase with Sm content, and then decreases when x>0.10. The imaginary part of complex permeability decreases after Sm³⁺ is doped. There is no obvious change in the real part of the complex permeability for different Sm contents. The reasons are discussed using electromagnetic theory.     

Effects of In-substitution on the structure and magnetic properties of multi-doped YIG ferrites with low saturation magnetizations

Multi-doped YIG ferrites {Y_1.7Gd_0.5Ca_0.8}[Fe_2−xIn_x](Fe_2.15V_0.4Mn_0.05Al_0.4)O₁₂ (x=0, 0.3, 0.6, 0.7, 0.8 and 0.9) with low saturation magnetizations (4πM_s=400-600 G at 298 K) were prepared by a conventional ceramic technology and the effects of In³⁺-substitution on their structures and magnetic properties were systematically investigated using XRD, SEM and VSM. It has been found that as-synthesized powders and sintered ferrites showed a single-phase of garnet structure with a cell parameter (a) that increased linearly with increase in In³⁺ concentration from x=0 up to 0.9. Apparent relative densities of sintered samples were all over 98%, but no remarkable influences of In³⁺-substitution were observed by SEM on the refinement of crystal grains and the enhancement of sintering of ferrites. In addition, the Curie temperature T_c decreased almost linearly as In³⁺concentration increased, while the corresponding saturation magnetization at room temperature presented a variation characterized by a gradual increase first and then a rapid plunge. On the basis of quantitative analysis of XRD data and the theory on super-exchange interactions, it has been established that the incorporated In³⁺ ions via doping were exclusively located at the sites with octahedral coordinations in the crystal structure and the aforementioned magnetic properties can be simply attributed to weakening super-exchange interactions between neighboring magnetic ions through oxygen ions due to the “dilution effect” of added non-magnetic In³⁺ ions.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Magnetic properties of La-substituted NiFe2O4 via egg-white precursor route

Nano-sized NiFe_2−xLa_xO₄ ferrites (x=0.00, 0.01, 0.02, 0.03, 0.04, 0.5, 0.07 and 0.09) were synthesized for the first time by using metal nitrate and egg-white extract in aqueous medium. The ferrites were characterized by DTA-TG, XRD, TEM, FT-IR and VSM techniques. The thermal decomposition behavior revealed that the precursors were completely decomposed at about 420 °C. TEM image shows agglomerated nanoparticles with crystallite sizes agrees well with that estimated by XRD measurement. XRD patterns show a secondary phase of LaFeO₃ besides the cubic structure of the La-substituted ferrites. The lattice parameters, X-ray density and crystallite size were found to increase with the increasing La content. The VSM measurement exhibited a ferromagnetic property for all the samples at room temperature. With increasing La, M_s was found to decrease while H_c increased. The decrease in the saturation magnetization is attributed to the paramagnetic properties of lanthanum, which prefer to substitute iron present in the octahedral sites. The increase in the coercivity is due to either the stronger magnetocrystalline anisotropy induced by La substitution or the change in the crystallite size.     

Effect of boric acid on structure,morphology and luminescent properties of divalent europium doped calcium aluminate phosphors

Blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ were prepared by high temperature solid-state method. Their structure, morphology and luminescent properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and fluorescence spectroscopy. The effect of different amounts of fluxing agent H₃BO₃ on structure, morphology and luminescent properties of blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ luminous intensity caused by different amount of H₃BO₃ was also investigated. The amount of H₃BO₃ doped Ca_1 − xAl₂O₄: xEu²⁺ in optimal luminous intensity had been determined. The results showed that both the excitation and emission spectra of samples were all broad bands, and that the peak of emission spectra was near 442 nm, which was corresponding to the 4f⁶5d → 4f⁷ transition of Eu²⁺ illuminating blue light. Ca_1 − xAl₂O₄: xEu²⁺ (x = 3.5 mol%) could be gained with good morphology and the best luminous intensity when H₃BO₃ mass ratio was 0.5 wt%.