Archaeological wood characterisation by PY/GC/MS, GC/MS, NMR and GPC techniques

The chemical characterisation of waterlogged archaeological wood is of paramount importance in terms of understanding not only the degradation processes of wood in artistic and archaeological objects but also the development of consolidation and conservation procedures. The two different types of archaeological waterlogged wood were characterized using several analytical techniques. The analytical protocol consists in using PY/GC/MS with in situ derivatisation with hexamethyldisilazane, GC/MS of the extractives, ¹H, ¹³C and ³¹P NMR analysis, and GPC. The main results showed that one of the ancient samples was a gymnosperm wood from the Pinaceae family, whereas the other type of wood was an angiosperm. Lignin from the angiosperm was oxidised in a benzylic position of β-O-4 to give oxo functional groups, in primary alcohol moiety to give carboxylic groups. In addition, the formation of a new intermonomeric bond 5-O-4 was observed.     

Monitoring of Polychlorinated Biphenyls in Surface Water Using Liquid Extraction,GC/MS,and GC/ECD

Abstract

A rapid and reliable analytical method, at trace level concentration was developed and validated for monitoring polychlorinated biphenyls (PCBs) in Jordanian surface water. The method combines the advantage of liquid extraction together with gas chromatography‐mass spectrometry (GC/MS) and gas chromatography‐electron capture detector (GC/ECD). The performance of the method was evaluated by analyzing certified reference material (CRM) of the analytes and applied on real water samples collected from different sites in Jordan. A mixture of 60∶40 dichloromethan‐petroleum ether was chosen as a convenient binary solvent for liquid–liquid extraction. The GC conditions for GC/MS were optimized using He as a carrier gas, temperature programming, and chlorpropham as an internal standard (IS).

The conditions for GC/ECD were performed using N₂ gas and a temperature program from 160 to 280°C with different increasing rates. The method of GC/MS in the selective ion mode (SIM) gave linear relationships for all PCBs tested between 0.60–6.0 µg/l with R ²=0.9934 (n=7×18). Recoveries from spiked water samples ranged between 87.6 and 91.4%. The mean accuracy and precision obtained were 4.9% and 2.16%, respectively. The mean of detection limit was 0.14±0.04 µg/l. In GC/ECD, linear relationships for all PCBs examined over the range of 0.3–2.4 µg/l was verified as characterized by a linear regression equation and correlation coefficient, R ²=0.9915 (n=12). The average precision and accuracy were 4.86% and 5.21%, respectively. Analyses results clarified that none of the examined Jordanian water samples contained any of the searched for PCBs within the detection limit achieved.     

Use of a polar ionic liquid as second column for the comprehensive two-dimensional GC separation of PCBs

The orthogonality of three columns coupled in two series was studied for the congener specific comprehensive two-dimensional GC separation of polychlorinated biphenyls (PCBs). A non-polar capillary column coated with poly(5%-phenyl–95%-methyl)siloxane was used as the first (¹D) column in both series. A polar capillary column coated with 70% cyanopropyl-polysilphenylene-siloxane or a capillary column coated with the ionic liquid 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethane-sulfonyl)imide were used as the second (²D) columns. Nine multi-congener standard PCB solutions containing subsets of all native 209 PCBs, a mixture of 209 PCBs as well as Aroclor 1242 and 1260 formulations were used to study the orthogonality of both column series. Retention times of the corresponding PCB congeners on ¹D and ²D columns were used to construct retention time dependences (apex plots) for assessing orthogonality of both columns coupled in series. For a visual assessment of the peak density of PCBs congeners on a retention plane, 2D images were compared. The degree of orthogonality of both column series was, along the visual assessment of distribution of PCBs on the retention plane, evaluated also by Pearson's correlation coefficient, which was found by correlation of retention times t_R,i,2D and t_R,i,1D of corresponding PCB congeners on both column series. It was demonstrated that the apolar + ionic liquid column series is almost orthogonal both for the 2D separation of PCBs present in Aroclor 1242 and 1260 formulations as well as for the separation of all of 209 PCBs. All toxic, dioxin-like PCBs, with the exception of PCB 118 that overlaps with PCB 106, were resolved by the apolar/ionic liquid series while on the apolar/polar column series three toxic PCBs overlapped (105 + 127, 81 + 148 and 118 + 106).     

High-temperature (GC)2/MS investigations

The analysis of low volatile compounds by (GC)²/MS using high-temperature stable glass-capillary columns and a commercially available GC/quadrupole MS instrument is described. It will be shown that no special modifications or procedures are required in analyzing organic compounds exceeding carbon numbers of 50. The application to industrially and naturally occuring high boiling mixtures will be discussed.     

GC/MS on an LC/MS instrument using atmospheric pressure photoionization

Atmospheric pressure (AP) GC/MS was first introduced by Horning et al. [E.C. Horning, M.G. Horning, D.I. Carroll, I. Dzidic, R.N. Stillwell, Anal. Chem. 45 (1973) 936] using ⁶³Ni as a beta-emitter for ionization. Because, at the time special instrumentation was required, the technique was only applied with consistency to negative ion environmental studies where high sensitivity was required [T. Kinouchi, A.T.L. Miranda, L.G. Rushing, F.A. Beland, W.A. Korfmacher, J. High Resolut. Chromatogr., Chromatogr. Commun. 13 (1990) 281]. Currently, AP ion sources are commonly available on LC/MS instruments and recently a method was reported for converting an AP-LC/MS ion source to a combination AP-LC/MS:GC/MS source [C.N. McEwen, R.G. McKay, J. Am. Soc. Mass Spectrom. 16 (2005) 1730]. Here, we report the use of atmospheric pressure photoionization (APPI) with GC/MS and compare this to AP chemical ionization (APCI) GC/MS and electron ionization (EI) GC/MS. Using a nitrogen purge gas, we observe excellent chromatographic resolution and abundant molecular M⁺ and MH⁺ ions as well as structurally significant fragment ions. Comparison of a 9.8 eV UV lamp with a 10.6 eV lamp, as expected, shows that the higher energy lamp gives more universal ionization and more fragment ions than the lower energy lamp. While there are clear differences in the fragment ions observed by APPI-MS versus EI-MS, there are also similarities. As might be expected from the ionization mechanism, APPI ionization is similar to low energy EI. These odd electron fragment ions are useful in identifying unknown compounds by comparison to mass spectra in computer libraries.     

Determination of butyltin species by GC/atomic emission spectroscopy

A commercially available atomic emission detector coupled to a capillary column-containing gas chromatograph (;GC/AE) was utilized to detect organotin compounds. The response for tin was found to be dependent on the flow rate of the make-up gas. At flow rates of 174 cm³ min^?1, 6 × 10^?12 g of tin could be detected. Lower flow rates decreased the sensitivity. Response curves for two different pressures were established and both plots exhibited curvature at low concentrations. Extracted fish and sediment samples were analysed on the GC/AE system. The technique is element-specific. The presence of tin compounds could be confirmed by examining the emission spectra taken at the retention time of the peak.     

High temperature (GC)2 and (GC)2/CI-MS of nucleosides: Analysis of purinyl nucleoside isomer composition

The analysis of low-volatile polar nucleosides by (GC)²/FID and (GC)²/CI-MS, employing HMDS-deactivated glass capillary columns and on-column injection, is described. The four linkage isomers of a specific nucleoside, formed in the synthetic procedure, are in each case sufficiently well separated in the chromatogram; GC/CI-MS allows for a differentiation of N-7 and N-9 linkage isomers.     

A calculation mode for the correct GC/ECNI-MS-SIM determination of polychlorinated terphenyls in the presence of high excesses of polychlorinated biphenyls

Polychlorinated terphenyls (PCTs) are a class of persistent organic pollutants difficult to analyze by gas chromatography with mass spectrometry operated in the selected ion monitoring mode (GC/MS-SIM) in environmental samples due to the retention time and mass range overlap with polychlorinated biphenyls (PCBs). To overcome these drawbacks, we developed and evaluated a mathematical calculation algorithm which allows to detail the interference of PCT congeners in GC/electron capture negative ion (ECNI)-MS-SIM chromatograms by PCBs. The calculation takes advantage of the abundance and ratio of two suitable isotope peaks of the molecular ion of PCTs. With the help of this method, we detected at least 63 tetra- to nonachlorinated terphenyls in the blubber of a harbour porpoise (Phocoena phocoena) from the North Sea. The interference of these peaks by PCBs ranged from >100 to 0?%. The novel calculation method used in combination with GC/ECNI-MS-SIM is suitable to analyze PCTs in environmental and food samples. However, it can also be applied to GC/EI-MS measurements.     

Analysis of polybrominated diphenyl ethers (PBDEs) by liquid chromatography with negative-ion atmospheric pressure photoionization tandem mass spectrometry (LC/NI-APPI/MS/MS): application to house dust

Eight polybrominated diphenyl ether (PBDE) congeners of primary interest to the US EPA were separated using reverse-phase liquid chromatography on an octadecylsilane column. BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were baseline-resolved under isocratic conditions in 92:8 methanol/water (v/v). Negative-ion atmospheric pressure photoionization (NI-APPI) with a toluene dopant produced precursor ions corresponding to [M–Br+O]^– for the eight congeners studied. Each congener was quantified by tandem mass spectrometry through a unique multiple reaction monitoring (MRM) transition. On-column limits of detection were between 2.4 and 27.8 pg for the eight congeners studied, with an intra-day method precision of 9%. The LC/NI-APPI/MS/MS method was validated for the analysis of the eight PBDE congeners in NIST SRM 2585 (Organics in House Dust). Pressurized liquid extraction (PLE) with subsequent LC/NI-APPI/MS/MS analysis afforded quantitative recovery for all eight PBDE congeners with recoveries ranging from 92.7 to 113%. The liquid-phase separation of the LC/NI-APPI/MS/MS method is not prone to the thermal degradation issues that plague splitless GC based analyses of highly brominated PBDEs such as BDE-209.     

Selective Determination of Se4+ and Se6+ Using SPME and GC/MS

A method for the selective determination of Se⁴⁺ and Se⁶⁺ using solid phase microextraction (SPME) and GC/MS analysis is presented. Se⁴⁺ is selectively derivatized by reaction with 4,5-dichloro-1,2-phenylenediamine to form the corresponding piazselenolo complex, extracted by the SPME fiber, and determined by GC/MS. The RSD at a 5 μg/L concentration was 9.88% and the theoretical detection limit 6 ng/L. The method was employed to test real matrices; tap and river water were analyzed before and after spiking giving a recovery rate of 102% in river water and 97% in tap water.     

Optimization of the Extraction and Analysis of Natural Androgen Steroids and Their Metabolites in Urine by GC/MS and GC/FID

A multiresidue method was developed for screening, quantification, and confirmation of nine natural androgen steroids and their metabolites in urine. Steroids were first extracted from urine by solid phase extraction, enzymatically deglucuronated, re-extracted using a liquid/liquid extraction for purification, and finally acetylated for GC/MS and GC/FID analysis. Each step of sample preparation, as well as analysis, was optimized: solid phase extraction, liquid/ liquid extraction, and derivatization reaction … Therefore, a rugged sample preparation procedure was developed leading to extracts of sufficient purity (recoveries >66% and few matrix compounds). The whole methodology allowed reliable detection and quantification of the nine steroids at low concentration levels. Linearity and repeatability were established and were found to be satisfactory (R² > 0.996, RSD < 11%). Finally, the method was applied to quantify compounds of interest in real samples collected from healthy volunteers and patients treated with 4-androstenedione or dehydroepiandrosterone.     

GC/IMS and GC/MS analysis of pre-concentrated medical and biological samples

Ion mobility spectrometry (IMS) is a well-known analytical method for the detection of CWAs and explosives since many years. Coupling IMS to GC pre-separation, new application fields in medicine and biology could be opened, dealing with complex and humid mixtures. However, identification of unknowns in such a complex sample is challenging and can only be achieved by parallel GC/MS analysis, thus obtaining a proposal for the responsible compound for validation via reference substances by GC/IMS again. The available adsorption tools for such accompanying GC/MS analysis have their particular drawbacks (e.g. problematic quantification for SPME, high sample volumes for adsorption tubes). Therefore miniaturised adsorption needles (NeedleTrap) were applied to both GC/IMS and GC/MS for validation of their reproducibility. It could be demonstrated that the needles can even be used for appropriate quantification when the adsorbent and the sample volume are adapted properly to the concentration range, the compounds of interest and humidity of the sample. The method is very flexible with regard to the concentration range by variation of the sample volume (e.g. 20 mL for ppt_V, 10 mL for lower ppb_V or 1 mL for ppm_V) and with regard to the compounds of interest by application of common adsorption materials optimised for the relevant substance group. Such materials are available commercially in a broad variability. Therefore, the miniaturised adsorption needles are a helpful complementary sampling method for any GC/MS or GC/IMS investigations.     

Determination of ultra-trace levels of priority PBDEs in water samples by isotope dilution GC(ECNI)MS using 81Br-labelled standards

A gas chromatography electron capture negative ionization mass spectrometry (GC(ECNI)MS) procedure for the determination of priority polybrominated diphenyl ethers (PBDEs; congeners 28, 47, 99, 100, 153 and 154) in water samples at regulatory EU levels has been developed. The method is based on the use of ⁸¹Br-labelled PBDEs for isotope dilution analysis and the measurement of ⁷⁹Br/⁸¹Br isotope ratios in gas chromatography peaks with the electron capture negative ionization technique. The suitability of this ion source for the precise and accurate measurement of bromine isotope ratios has been demonstrated. The general ECNI-IDMS procedure was evaluated by the analysis of NIST SRM 1947 (Lake Michigan fish tissue) with satisfactory results. For the analysis of water samples, 500 mL of the samples were spiked with the labelled PBDEs and extracted with 10 mL isooctane for 30 min. The extract was evaporated down to ca. 100 μL and injected in the GC(ECNI)MS. Detection limits ranged from 0.014 ⁻¹ to 0.089 pg mL⁻¹ depending on the congener. Recoveries from real water samples, spiked at a level of 0.5 pg mL⁻¹, ranged from 77% to 102%.     

GC determination of N-nitrosamines by supersonic molecular beam MS equipped with triple quadrupole analyzer, GC/SMB/QQQ/MS

The determination of 14 N-nitrosamines by a supersonic molecular beam electron ionization mass spectrometer equipped with triple quadruple analyzer, GC/SMB/EI/QQQ/MS is presented. The supersonic molecular beam electron ionization ion source allows the elucidation of the molecular ion of 13 out of the 14 examined nitrosamines (except for diphenylnitrosamine which was degraded before the analysis). It was possible to use the molecular ions of all the nitrosamines as the parent ions for multiple reactions monitoring mode, which in turn allows significant increase of specificity and lowering of the method limit of detection of the higher molecular weight nitrosamines. The instrumental LOD for different N-nitrosamines was 1–5 pg injection⁻¹. The proposed method was exemplified by analysis of N-nitrosamines and N-nitrosatables in rubber teats according to the British Standard BS EN 12868:1999.     

Identification of organic residues in tertiary effluents by GC/EI-MS,GC/CI-MS and GC/TSQ-MS

A method was developed for the analysis of non-volatile dissolved organic residues in tertiary treated wastewater effluents. This method involved concentration of samples by rotary evaporation, propylation using propanol/formic acid/acetyl chloride, and separation, detection and quantitation by capillary GC/EI and CI-MS and GC/TSQ-MS analysis. Ethylenediamine tetraacetic acid (EDTA) was the most prominent compound found in both granular activated carbon (GAC) and chlorinated GAC effluents (110 and 140 μg/L, respectively). Other compounds identified included nitrilotriacetic acid (NTA), carboxyalkylphenoxy ethoxy carboxylates, poly(propoxy), poly(ethoxy) or poly(ethoxy)(propoxy) compounds, small aliphatic dicarboxylic acids and aldehydes, all at lg/L levels. Approximately 80% of all chromatographically separated compounds were positively or tentatively identified. The identified compounds are estimated to account for approximately 10% of the dissolved organic carbon. Received: 8 August 1994/Revised: 14 February 1995/Accepted: 16 February 1995 Correspondence to: W.-H. Ding     

Estimation of Olefin Dimerisation Products by GC/GC–MS and IR Techniques

A GC and IR based protocol was developed for monitoring the isobutene dimerisation process wherein the complete characterisation of the products was carried out by GC coupled with mass spectrometry. In the dimerisation process, LPG from FCC process comprising a mixture of saturated and unsaturated C4 hydrocarbons is subjected to a dimerisation process using a catalyst to produce C8 hydrocarbons. The reaction is carried out keeping in view the demand for high-octane blending components in gasoline. The isooctene generated in the process (mainly from the dimerisation of isobutene) is converted into isooctane having the RON and MON value 100. The monitoring process requires the use of two different column chemistries, viz., a 100 m CPSIL PONA CB non-polar column for C8 and its isomers and an Alumina PLOT column for C4 hydrocarbons. A 100 m non-polar column does not separate the C4 mixture since the column is meant for gasoline range products containing C5 and above hydrocarbons. Therefore, a need was felt for an improvised method which can handle both the analyses simultaneously. A cryogenic oven program starting from 0 °C was developed for separating the isomers of C4 hydrocarbons and C8 hydrocarbons on a single column during the single run by Detailed Hydrocarbon Analyzer. The data obtained using the cryo programme was validated with data obtained using Alumina PLOT column on C4 mixture since the Alumina PLOT column is the widely accepted column chemistry for separating the C4 hydrocarbons. An IR method for the estimation of the total olefin content was developed using 2,2,4-trimethyl pentene-1 as the reference standard. The total olefins generated during the process were identified by GC–MS, quantified by DHA-FID and validated by infrared spectroscopy. A good correlation was found between GC and IR spectral results (correlation coefficient R ² = 0.99).

     

Cyclic voltammetric investigation of Eu<Superscript>3+</Superscript> on a MWCNTs/SDS-modified glassy carbon (GC) electrode

Electrochemical reduction behavior of Eu³⁺ on a multi-walled carbon nanotubes (MWCNTs)/sodium lauryl sulfate (SDS) (MWCNTs/SDS)-modified glassy carbon (GC) electrode was investigated by cyclic voltammetry (CV). Results indicated that the electrochemical reduction process of Eu³⁺ at the MWCNTs/SDS-modified GC electrode is a quasi-reversible and diffusion-controlled process. The value of standard rate constant (k _s) at the MWCNTs/SDS-modified GC electrode was estimated to 1.96 × 10⁻² cm s⁻¹. CV studies showed that the electrochemical response of Eu³⁺ was directly related to the ratio of MWCNTs to SDS, and the tube diameter of MWCNTs had a slight influence on the electrochemical behavior of Eu³⁺, whereas the tube length. of MWCNTs had a strong influence. CVs results also proved that s-MWCNTs (with shorter tube length)-modified GC electrode showed better response to the electrochemical reaction of Eu³⁺.     

Kinetic studies of glucose electrocatalytic oxidation on GC/Ni electrode

Nickel‐modified glassy carbon electrode (GC/Ni) prepared by galvanostatic deposition was used for the electrocatalytic oxidation of glucose in alkaline solutions where different electrochemical methods were employed. In cyclic voltammetry studies, in the presence of glucose an increase in the peak current of the oxidation of nickel hydroxide is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of glucose is being catalyzed through mediated electron transfer across the nickel hydroxide layer comprising nickel ions of various valence states. Under the chronoamperometric regime, the reaction followed a Cottrellian behavior and the diffusion coefficient of glucose was found to be 8 × 10^?6 cm² s^?1. A mechanism based on the electrochemical generation of Ni³⁺‐active sites and their subsequent consumptions by glucose has been discussed, and kinetic parameters have been derived. The heterogeneous rate constants for the oxidation of glucose at the surface of modified electrodes were determined by rotating disk electrode using the Koutecky–Levich plots, which are in agreement with the data obtained by chronoamperometry. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 712–721, 2012     

Development of a headspace–SPME–GC/MS method to determine volatile organic compounds released from textiles

A method for determining the volatile organic compounds (VOCs) in textiles was developed, by the use of high capacity headspace, solid phase micro extraction (SPME) and gas chromatography–mass spectrometry (GC/MS). The detection targets contained total organic compounds (TVOCs) and six specific substances (toluene, vinylcyclohexene, styrene, 4-phenylcyclohexene, vinylchloride and butadiene), according to Oeko-Tex Standard 100. A designed experiment was used to optimize the headspace–SPME–GC/MS operation, and the method was validated in terms of linearity, limit of detection (LOD) and method precision. It was found that at a loading ratio of 10 m²/m³, the LODs for toluene, vinylcyclohexene, styrene and 4-phenylcyclohexene were 0.0002 mg/m², 0.01 mg/m², 0.01 mg/m² and 0.0001 mg/m² respectively, while for vinylchloride and butadiene they were both 0.08 mg/m². SPME exhibited better adsorption performance for toluene, vinylcyclohexene, styrene and 4-phenylcyclohexene, for which the extraction fractions were 10 times of those for vinylchloride and butadiene. The method developed was successfully applied to analyze several commercial textiles, and would be a simple, efficient and promising technique for the analysis of volatile compounds from textiles or other samples (such as polymer materials).     

Tolerance of glucose electrocatalytic oxidation on NiO x /MnO x /GC electrode to poisoning by halides

This paper is devoted to the investigation of the tolerance of glucose oxidation on NiO _x /MnO _x /GC binary catalyst to poisoning by halide ions. NiO _x /MnO _x /GC electrode was prepared by the consecutive electrodeposition of MnO _x followed by the deposition of NiO _x nanoparticles atop the previously deposited MnO _x nanoparticles. The electrode was characterized electrochemically and morphologically. Interestingly, experimental results showed that the NiO _x /MnO _x /GC electrode shows a superior electrocatalytic activity compared with the NiO _x /GC electrode and a behavior comparable to the NiO _x /GC electrode regarding tolerance to poisoning by halides, even in the presence of high concentrations of Cl^? and Br^? up to 0.3 M. On the other hand, it was found that iodide ions have a significant effect on glucose electrooxidation under the prevailing operating conditions and even at concentrations lower than those of the other two halide ions.