Alkali-metal-mediated zincation of anisole: synthesis and structures of three instructive ortho-zincated complexes

The new concept of alkali-metal-mediated zincation (AMMZ), formally a zinc-hydrogen exchange reaction but one that requires the participation of an alkali metal, is applied here to the alkyl aryl ether anisole, an important molecule for studying directed ortho-metalation (DoM) chemistry. Treating one molar equivalent of anisole with the lithium dialkyl-TMP zincate reagent [THF.Li(mu-TMP)(mu-tBu)Zn(tBu)] (1) in hexane solution affords the mono-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (2), which establishes that 1 functions as an alkyl base although previously it was regarded as an amido (TMP) base in other DoM applications. Treating two molar equivalents of anisole with 1, and increasing the reaction time, affords the bis-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(o-C6H4OMe)] (3), which establishes that 1 can also function as a dual alkyl base. Omitting THF and rerunning the reaction with one or two molar equivalents of anisole affords [Ph(Me)O.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (4), which remarkably contains a combination of neutral and ortho-deprotonated anisole ligands. On isolating crystalline 4 from solution and adding THF, it converts to 2 and then to 3 on further stirring of the solution, as determined by NMR studies. This fact, along with other observations, would suggest that a complex-induced proximity effect does not need to be invoked to explain the observed zincation of anisole. The crystal structures of 2-4 are presented, as are their 1H, 13C, and 7Li NMR spectra recorded in C6D6 solution.     

Mixed alkylamido aluminate as a kinetically controlled base

The mechanisms by which directed ortho metalation (DoM) and postmetalation processes occur when aromatic compounds are treated with mixed alkylamido aluminate i-Bu3Al(TMP)Li (TMP-aluminate 1; TMP = 2,2,6,6-tetramethylpiperidide) have been investigated by computation and X-ray diffraction. Sequential reaction of ArC(=O)N(i-Pr)2 (Ar = phenyl, 1-naphthyl) with t-BuLi and i-Bu3Al in tetrahydrofuran affords [2-(i-Bu3Al)C(m)H(n)C(=O)N(i-Pr)2]Li x 3 THF (m = 6, n = 4, 7; m = 10, n = 6, 8). These data advance the structural evidence for ortho-aluminated functionalized aromatics and represent model intermediates in DoM chemistry. Both 7 and 8 are found to resist reaction with HTMP, suggesting that ortho-aluminated aromatics are incapable of exhibiting stepwise deprotonative reactivity of the type recently shown to pertain to the related field of ortho zincation chemistry. Density functional theory calculations corroborate this view and reveal the existence of substantial kinetic barriers both to one-step alkyl exchange and to amido-alkyl exchange after an initial amido deprotonation reaction by aluminate bases. Rationalization of this dichotomy comes from an evaluation of the inherent Lewis acidities of the Al and Zn centers. As a representative synthetic application of this high kinetic reactivity of the TMP-aluminate, the highly regioselective deprotonative functionalization of unsymmetrical ketones both under mild conditions and at elevated temperatures is also presented.     

Sodium dialkyl-amidozincates: alkyl or amido bases? An experimental and theoretical case study

Alkali metal zincate reagents are attracting considerable attention at present in respect to their often special reactivity/selectivity in hydrogen-metal and halogen-metal interconversion reactions. Heteroleptic diorgano-amidozincates, typified by lithium di-tert-butyltetramethylpiperidinozincate, have proved to be especially useful reagents in such applications. In this paper the related sodium TMP-zincate, prepared as its TMEDA (N,N,N',N'-tetramethylethylenediamine) adduct, [TMEDA.Na(mu-tBu)(mu-TMP)Zn(tBu)], 1, is introduced. This new zincate was synthesized from a 1:1:1 mixture of tBu2Zn, NaTMP, and TMEDA in hexane solution, as a colorless crystalline solid in an isolated yield of 58%. It has been characterized in solution by 1H and 13C NMR spectroscopic studies. An X-ray crystallographic study reveals that 1 adopts a five-membered (NaNZnCC) ring system featuring a TMP bridge and an unusual, asymmetrical tBu bridge involving a Na...Me agostic contact. Probing the basicity of 1, reaction with benzene affords the new hetero(tri)leptic zincate [TMEDA.Na(mu-Ph)(mu-TMP)Zn(tBu)], 2, which has also been crystallographically characterized. Thus, in this hydrogen-metal exchange reaction 1 functions as an alkyl base, with the elimination of butane, as opposed to an amido base. Also reported are DFT calculations using B3LYP functionals and the 6-311G** basis set on model zincate systems, which intimate that the preference of 1 for tBu ligand transfer over TMP ligand transfer in the reaction toward benzene is due to favorable thermodynamic factors.     

Tripodal amido boron and aluminum complexes

The synthesis and structural elucidations of novel boron and aluminum complexes incorporating the tripodal triamido [N3]3- ligand framework that is hypothesized to promote the preorganized pyramidal geometry for high Lewis acidity are reported. Salt metathesis between the in situ-generated trianionic lithium complexes of the tripodal amido ligands with BCl3 leads to boranes HC[SiMe2N(4-MeC6H4)]3B (1) and MeSi[SiMe2N(4-MeC6H4)]3B (2); however, substitution of the N-Ar group with the bulky tBu affords the unexpected non-boron-containing LiCl adduct {[HC(SiMe2NtBu)2(SiMeNtBu)]Li3(Et2O)Cl}2 (3) via apparent elimination of MeBCl2. The products derived from the salt metathesis reaction with AlCl3 are determined by the reaction medium: while the reaction in a hexanes-ether mixture or toluene affords solvated salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi(Et2O)2 (4) or salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi (5), respectively; the addition of a small amount of THF produces a mixture of complexes HC[SiMe2N(4-MeC6H4)]3Al.(THF) (6, major) and HC[SiMe2N(4-MeC6H4)]3Al(OCH=CH2).Li(THF)2 (7, minor). The desired complex 6 can be exclusively formed using HC[SiMe2N(4-MeC6H4)]3Li3.(THF)3 and the hexanes-ether mixture solvent. The molecular structures of complexes 1, 3, 5, 6, and 7 have been elucidated by X-ray diffraction studies. The structure of 1 shows an approximately trigonal pyramidal geometry at B with no significant N-B p-p pi-interactions. The strong salt adduct and solvate formation of the tripodal amido Al complex, as well as its similarity to the strong Lewis acid Al(C6F5)3 in the THF adduct and enolaluminate formation and structure, indicate the desired core structure [N3]Al is indeed highly Lewis acidic.     

Tris[bis(trimethysilyl)amido]zinkate von Lithium und Calcium

Tris[bis(trimethylsilyl)amido]zincates of Lithium and Calcium Calcium-bis[bis(trimethylsilyl)amide] and Bis[bis(trimethylsilyl)amido]zinc yield in 1,2-dimethoxyethane quantitatively Calcium-bis{tris[bis(trimethylsilyl)- amido]zincate} · 3DME. When THF is chosen as a solvent, the two reactants and the zincate form a temperature-independent equilibrium, whereas in benzene no reaction occurs. The tris[bis(trimethylsilyl)amido]zincate anion displays characteristic ¹³C{¹H) and ²⁹Si{¹H] chemical shifts of 7 and ?8 ppm, respectively; the nature of the solvent, the cation and the complexating ligands don't influence the IR nor NMR data of the zincate anion and thus verify that [Ca(DME)₃]²⁺ and {Zn[N(SiMe_{3 2}]₃}^? appear as solvent separated ions, which is also confirmed by their insolubility in hydrocarbons.     

Synthesis and structural characterization of a series of lanthanide(II) amides: steric effect of amido ligand

The synthesis and structures of a series of lanthanide(II) and lanthanide(III) complexes supported by the amido ligand N(SiMe3)Ar were described. Several lanthanide(III) amide chlorides were synthesized by a metathesis reaction of LnCl3 with lithium amide, including {[(C6H5)(Me3Si)N]2YbCl(THF)}2.PhCH3 (1), [(C6H3-iPr2-2,6)(SiMe3)N]2YbCl(mu-Cl)Li(THF)3.PhCH3 (4), [(C6H3-iPr2-2,6)(SiMe3)N]YbCl2(THF)3 (6), and [(C6H3-iPr2-2,6)(SiMe3)N]2SmCl3Li2(THF)4 (7). The reduction reaction of 1 with Na-K alloy afforded bisamide ytterbium(II) complex [(C6H5)(Me3Si)N]2Yb(DME)2 (2). The same reaction for Sm gave an insoluble black powder. An analogous samarium(II) complex [(C6H5)(Me3Si)N]2Sm(DME)2 (3) was prepared by the metathesis reaction of SmI2 with NaN(C6H5)(SiMe3). The reduction reaction of ytterbium chloride 4 with Na-K alloy afforded monoamide chloride {[(C6H3-iPr2-2,6)(SiMe3)N]Yb(mu-Cl)(THF)2}2 (5), which is the first example of ytterbium(II) amide chloride, formed via the cleavage of the Yb-N bond. The same reduction reaction of 7 gave a normal bisamide complex [(C6H3-iPr2-2,6)(SiMe3)N]2Sm(THF)2 (8) via Sm-Cl bond cleavage. This is the first example for the steric effect on the outcome of the reduction reaction in lanthanide(II) chemistry. 5 can also be synthesized by the Na/K alloy reduction reaction of 6. All of the complexes were fully characterized including X-ray diffraction for 1-7.     

New reactivity and structural insights of alkali-metal-mediated alumination in directed ortho-alumination of a tertiary aromatic amide

The first reported sodium alkyl(TMP)aluminate reagent to be synthesised and crystallographically characterised, [TMEDA.Na(mu-TMP)(mu-(I)Bu)Al((I)Bu)2], reacts as an amido base towards phenylacetylene to form crystalline [(TMEDA)2.Na(mu-CCPh)(mu-(I)Bu)Al((I)Bu)2]; whereas the congeneric TMEDA-stabilised lithium (TMP)aluminate exhibits dual alkyl/amido basicity in its reaction with N,N-diisopropylbenzamide to form a novel heterobimetallic-heterotrianionic crystalline complex [{PhC(=O)N(iPr)2}.Li{2-[1-C(=O)N(iPr)2]C6H4}{Me2NCH2CH2N(Me)CH2}Al(iBu)2], which, in addition to having an ortho-deprotonated benzamide ligand, also contains a methyl-deprotonated TMEDA ligand and a neutral benzamide molecule ligated to lithium.     

Oxygen capture by lithiated organozinc reagents containing aromatic 2-pyridylamide ligands

The sequential reaction of ZnMe2 with a 2-pyridylamine (HN(2-C5H4N)R, R = Ph: 1; 3,5-Xy (=3,5-xylyl): 2; 2,6-Xy: 3; Bz (=benzyl): 4; Me: 5), tBuLi and thereafter with oxygen affords various lithium zincate species, the solid-state structures of which reveal a diversity of oxo-capture modes. Amine 1 reacts to give both dimeric THF [Li(Me)OZn[N(2-C5H4N)Ph]2] (6), wherein oxygen has inserted into the Zn-C bond of a [MeZn[N(2-C5H4N)-Ph]2] ion, and the trigonal Li2Zn complex, bis(OtBu)-capped (THF x Li)2-[[(mu3-O)tBu]2Zn[N(2-C5H4N)Ph]2] (7). The structural analogue of 6 (8) results from the employment of 2, while the use of more sterically congested 3 yields a pseudo-cubane dimer [(THF x [Li(tBu)OZn(OtBu)Me]]2] (9) notable for the retention of labile Zn-C(Me). Amines 4 and 5 afford the oxo-encapsulation products [mu4-O)Zn4[(2-C5H4N)-NBz]6] (10b), and [tBu(mu3-O)-Li3(mu6-O)Zn3[(2-C5H4N)NMe]6] (11), respectively, with concomitant oxo-insertion into a Li-C interaction resulting in capping of the fac-isomeric (mu6-O)M3M'3 distorted octahedral core of the latter complex by a tert-butoxide group.     

Structure and reaction pathway of TMP-Zincate: amido base or alkyl base?

The novel directed ortho metalation (DoM) reagents for functionalized aromatic rings, TMP-Zn-ates (R2Zn(TMP)Li (R = Me, 1; tBu, 2)), have been reported to be synthetically useful for the chemo- and regioselective construction of multi-functionalized aromatic compounds. Here, we present the first comprehensive structural and mechanistic investigation by means of X-ray, NMR, and DFT studies on the DoM reaction employing our original TMP-Zn-ate base. The structures of TMP-Zn-ates in solution and in the solid state were determined. The DFT study strongly suggested that the deprotonation involving the TMP ligand on the TMP-Zn-ate is kinetically more favorable than that involving the alkyl ligand, and this view was supported by monitoring of the 13C NMR spectrum of the reaction mixture.     

Polylithiated tetraaminosilanes: synthesis and characterization of (Et2O.Li)4[Si(Nnaph)4] and X-ray structure of (THF.Li3[Si(NiPr)3(NHiPr)])2

The treatment of SiCl4 with 4 equiv of Li2(Nnaph) (naph = 1-naphthyl) in diethyl ether gives (Et2O.Li)4[Si(Nnaph)4] (4), which, upon reaction with excess tBuNH3Cl or MeO3SCF3, generates Si[N(H)naph]4 (5) or Si[N(Me)naph]4 (6), respectively. The centrosymmetric dimer (THF.Li3[Si(NiPr)3(NHiPr)])2 (7), formed via trilithiation of Si[N(H)iPr]4 with n-butyllithium, consists of a bis-THF-solvated Li6(NiPr)6 cyclic ladder bicapped by two SiN(H)iPr units. Crystal data for 7: C32H74Li6N8O2Si2, monoclinic, P2(1)/n, a = 10.661(7) A, b = 16.964(5) A, c = 12.405(4) A, beta = 93.22(4) degrees, V = 2239.9(15) A3, and Z = 2.     

Synthesis and structural elucidation of solvent-free and solvated lithium dimethyl (HMDS) zincates

Using a co-complexation methodology the unsolvated lithium zincate [LiZn(HMDS)Me2] ( 4, HMDS = 1,1,1,3,3,3-hexamethyldisilazide) was prepared by reaction of an equimolar amount of LiHMDS with Me2Zn in a non-polar toluene-hexane solvent mixture. X-Ray crystallographic studies reveal that the asymmetric unit of 4 has a dinuclear arrangement, based on a planar LiNZnC four-membered ring. As a result of intermolecular interactions between the lithium centre of one asymmetric unit and a terminal methyl group of another, 4 presents a polymeric chain array in the solid state. DFT calculations revealed that the formation of the polymer is the driving force for the success of co-complexation of LiHMDS and Me2Zn to yield the unsolvated zincate 4. The reaction of 4 with PMDETA (N,N,N,N,N-pentamethyldiethylenetriamine) afforded the new solvated zincate [(PMDETA)Li(mu-Me)Zn(HMDS)Me] ( 5). X-Ray crystallographic studies show that the asymmetric unit of 5 consists of an open, dinuclear LiCZnC arrangement rather than a closed cyclic one, in which the HMDS ligand unusually occupies a terminal position on Zn. DFT computational studies showed that the structure found for 5 was energetically preferred to the expected HMDS-bridging isomer due to the steric hindrance imposed by the tridentate PMDETA ligand. The reaction of 4 with the neutral nitrogen donors 4-tert-butylpyridine and tert-butylcyanide afforded the homometallic compounds [(tBu-pyr)Li(HMDS)] ( 6) and [(tBuCN)Li(HMDS)] ( 7) respectively as a result of disproportionation reactions. Compounds 6 and 7 were characterized by NMR (1H, 13C and 7Li) spectroscopy.     

Nickel complexes incorporating an amido phosphine chelate with a pendant amine arm: synthesis, structure, and catalytic Kumada coupling

A series of organonickel(II) complexes incorporating an amido phosphine ligand tethered with an amino pendant have been prepared and characterized. Deprotonation of N-(dimethylaminoethyl)-2-diphenylphosphinoaniline (H[PNN]) with one equivalent of n-BuLi in ethereal or hydrocarbon solutions at -35 °C generates cleanly dimeric {Li[PNN]}(2) as yellow crystals. The reaction of NiCl(2)(DME) with {Li[PNN]}(2) in THF at -35 °C affords green crystalline [PNN]NiCl. Treating [PNN]NiCl with NaX in acetone solutions gives [PNN]NiX (X = Br, I). Alkylation or arylation of [PNN]NiCl with appropriate Grignard reagents in THF at -35 °C produces red crystalline [PNN]NiR (R = Me, Et, i-Bu, n-hexyl, CH(2)Ph, Ph). The chloride complex [PNN]NiCl was found to be an active catalyst precursor for Kumada coupling reactions of PhX (X = I, Br, Cl) with aryl or alkyl Grignard reagents, including those containing β-hydrogen atoms. The X-ray structures of {Li[PNN]}(2) and [PNN]NiX (X = Cl, Br, Me, Et, n-hexyl) are reported.     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

Synthesis and structural characterization of alkaline-earth-metal bis(amido)silane and lithium oxobis(aminolato)silane complexes

Several of alkaline-earth-metal complexes [(η(2):η(2):μ(N):μ(N)-Li)(+)](2)[{η(2)-Me(2)Si(DippN)(2)}(2)Mg](2-) (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Ca·3THF] (5), [η(2)(N,N)-Me(2)Si(DippN)(2)Sr·THF] (6), and [η(2)(N,N)-Me(2)Si(DippN)(2)Ba·4THF] (7) of a bulky bis(amido)silane ligand were readily prepared by the metathesis reaction of alkali-metal bis(amido)silane [Me(2)Si(DippNLi)(2)] (Dipp = 2,6-i-Pr(2)C(6)H(3)) and alkaline-earth-metal halides MX(2) (M = Mg, X = Br; M = Ca, Sr, Ba, X = I). Alternatively, compounds 5-7 were synthesized either by transamination of M[N(SiMe(3))(2)](2)·2THF (M = Ca, Sr, Ba) and [Me(2)Si(DippNH)(2)] or by transmetalation of Sn[N(SiMe(3))(2)](2), [Me(2)Si(DippNH)(2)], and metallic calcium, strontium, and barium in situ. The metathesis reaction of dilithium bis(amido)silane [Me(2)Si(DippNLi)(2)] and magnesium bromide in the presence of oxygen afforded, however, an unusual lithium oxo polyhedral complex {[(DippN(Me(2)Si)(2))(μ-O)(Me(2)Si)](2)(μ-Br)(2)[(μ(3)-Li)·THF](4)(μ(4)-O)(4)(μ(3)-Li)(2)} (8) with a square-basket-shaped core Li(6)Br(2)O(4) bearing a bis(aminolato)silane ligand. All complexes were characterized using (1)H, (13)C, and (7)Li NMR and IR spectroscopy, in addition to X-ray crystallography.     

Synthesis and structural characterization of beta-diketiminate-lanthanide amides and their catalytic activity for the polymerization of methyl methacrylate and epsilon-caprolactone

The synthesis and catalytic activity of lanthanide monoamido complexes supported by a beta-diketiminate ligand are described. Donor solvents, such as DME, can cleave the chloro bridges of the dinuclear beta-diketiminate ytterbium dichloride {[(DIPPh)2nacnac]YbCl(mu-Cl)3Yb[(DIPPh)2nacnac](THF)} (1) [(DIPPh)2nacnac = N,N-diisopropylphenyl-2,4-pentanediimine anion] to produce the monomeric complex [(DIPPh)2nacnac]YbCl2(DME) (2) in high isolated yield. Complex 2 is a useful precursor for the synthesis of beta-diketiminate-ytterbium monoamido derivatives. Reaction of complex 2 with 1 equiv of LiNPri2 in THF at room temperature, after crystallization in THF/toluene mixed solvent, gave the anionic beta-diketiminate-ytterbium amido complex [(DIPPh)2nacnac]Yb(NPri2)(mu-Cl)2Li(THF)2 (3), while similar reaction of complex 2 with LiNPh2 produced the neutral complex [(DIPPh)2nacnac]Yb(NPh2)Cl(THF) (4). Recrystallization of complex 3 from toluene solution at elevated temperature led to the neutral beta-diketiminate-lanthanide amido complex [{(DIPPh)2nacnac}Yb(NPri2)(mu-Cl)]2 (5). The reaction medium has a significant effect on the outcome of the reaction. Complex 2 reacted with 1 equiv of LiNPri2 and LiNC5H10 in toluene to produce directly the neutral beta-diketiminate-lanthanide amido complexes 5 and [{(DIPPh)2nacnac}Yb(NC5H10)(THF)(mu-Cl)]2 (6), respectively. These complexes were well characterized, and their crystal structures were determined. Complexes 4-6 exhibited good catalytic activity for the polymerization of methyl methacrylate and epsilon-caprolactone.     

Synthesis and characterisation of a series of alkylmagnesium amide and related oxygen-contaminated "alkoxy" compounds

Synthesised either by an unusual tert-butyl metathesis between tert-butyllithium and a n,s-butylmagnesium amide or by reaction of an alkyl Grignard reagent and a sodium amide, five tert-butylmagnesium amides, Bu(t)MgDBA (5)(DBA=dibenzylamide), Bu(t)MgDA (6)(DA=diisopropylamide), Bu(t)MgHMDS (7)(HMDS=1,1,1,3,3,3-hexamethyldisilazide), Bu(t)MgTMP (8)(TMP=2,2,6,6-tetramethylpiperidide) and Bu(t)MgNCy2 (9)(cy=cyclohexyl) have been isolated as crystalline solids. All five amides have been characterised by X-ray crystallography and solution NMR spectroscopic studies. The former studies reveal a common dimeric molecular structure with amido bridges in a planar (MgN)2 ring and terminal Bu(t) ligands on the Mg atoms. Also described is the dodecameric primary amide [Bu(n)MgN(H)Dipp]12 (10a) and its monomeric solvate Bu(n)MgN(H)Dipp.TMEDA (10b)(Dipp=2,6-diisopropylphenyl; TMEDA=N,N,N',N'-tetramethylethylenediamine). The crystal structures of the oxo-insertion products Bu(t)MgOBu(t).THF (11), Bu(t)Mg(mu-OBu(t))(mu-TMP)MgTMP (12) and Mg(OBu(n))HMDS.solv [solv=THF (13a) or Et2O (13b)], made fortuitously during the course of this work, are also presented.     

A trigonal bipyramidal uranyl amido complex: synthesis and structural characterization of [Na(THF)2][UO2(N(SiMe3)2)3

The synthesis and structural characterization of a rare example of a uranyl complex possessing three equatorial ligands, [M(THF)2][UO2(N(SiMe3)2)3] (3a, M = Na; 3b, M = K), are described. The sodium salt 3a is prepared by protonolysis of [Na(THF)2]2[UO2(N(SiMe3)2)4], whereas the potassium salt 3b is obtained via a metathesis reaction of uranyl chloride UO2Cl2(THF)2 (4) with 3 equiv of K[N(SiMe3)2]. A single-crystal X-ray diffraction study of 3a revealed a trigonal-bipyramidal geometry about uranium, formed by two axial oxo and three equatorial amido ligands, with average U=O and U-N bond distances of 1.796(5) and 2.310(4) A, respectively. One of the oxo ligands is also coordinated to the sodium counterion. 1H NMR spectroscopic studies indicate that THF adds reversibly as a ligand to 3 to expand the trigonal bipyramidal geometry. The degree to which the coordination sphere in 3 is electronically satisfied with only three amido donors is suggested by (1) the reversible THF coordination, (2) a modest elongation in the bond distances for a five-coordinate U(VI) complex, and (3) the basicity of the oxo ligands as evidenced in the contact to Na. The vibrational spectra of the series of uranyl amido complexes [UO2(N(SiMe3)2)n]2-n (n = 2-4) are compared, to evaluate the effects on the axial U=O bonding as a function of increased electron density donated from the equatorial region. Raman spectroscopic measurements of the nu 1 symmetric O=U=O stretch show progressive axial bond weakening as the number of amido donors is increased. Crystal data for [Na(THF)2][UO2(N(SiMe3)2)3]: orthorhombic space group Pna2(1), a = 22.945(1) A, b = 15.2830(7) A, c = 12.6787(6) A, z = 4, R1 = 0.0309, wR2 = 0.0524.     

Catalytic addition of amine N-H bonds to carbodiimides by half-sandwich rare-earth metal complexes: efficient synthesis of substituted guanidines through amine protonolysis of rare-earth metal guanidinates

Reaction of [Ln(CH(2)SiMe(3))(3)(thf)(2)] (Ln=Y, Yb, and Lu) with one equivalent of Me(2)Si(C(5)Me(4)H)NHR' (R'=Ph, 2,4,6-Me(3)C(6)H(2), tBu) affords straightforwardly the corresponding half-sandwich rare-earth metal alkyl complexes [{Me(2)Si(C(5)Me(4))(NR')}Ln(CH(2)SiMe(3))(thf)(n)] (1: Ln = Y, R' = Ph, n=2; 2: Ln = Y, R' = C(6)H(2)Me(3)-2,4,6, n=1; 3: Ln = Y, R' = tBu, n=1; 4: Ln = Yb, R' = Ph, n=2; 5: Ln = Lu, R' = Ph, n=2) in high yields. These complexes, especially the yttrium complexes 1-3, serve as excellent catalyst precursors for the catalytic addition of various primary and secondary amines to carbodiimides, efficiently yielding a series of guanidine derivatives with a wide range of substituents on the nitrogen atoms. Functional groups such as C[triple chemical bond]N, C[triple chemical bond]CH, and aromatic C--X (X: F, Cl, Br, I) bonds can survive the catalytic reaction conditions. A primary amino group can be distinguished from a secondary one by the catalyst system, and therefore, the reaction of 1,2,3,4-tetrahydro-5-aminoisoquinoline with iPrN==C==NiPr can be achieved stepwise first at the primary amino group to selectively give the monoguanidine 38, and then at the cyclic secondary amino unit to give the biguanidine 39. Some key reaction intermediates or true catalyst species, such as the amido complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y(NEt(2))(thf)(2)] (40) and [{Me(2)Si(C(5)Me(4))(NPh)}Y(NHC(6)H(4)Br-4)(thf)(2)] (42), and the guanidinate complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrNC(NEt(2))(NiPr)}(thf)] (41) and [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrN}C(NC(6)H(4)Br-4)(NHiPr)}(thf)] (44) have been isolated and structurally characterized. Reactivity studies on these complexes suggest that the present catalytic formation of a guanidine compound proceeds mechanistically through nucleophilic addition of an amido species, formed by acid-base reaction between a rare-earth metal alkyl bond and an amine N--H bond, to a carbodiimide, followed by amine protonolysis of the resultant guanidinate species.     

High-valent uranium alkyls: evidence for the formation of U(VI)(CH2SiMe3)6

Oxidation of [Li(DME)(3)][U(CH(2)SiMe(3))(5)] with 0.5 equiv of I(2), followed by immediate addition of LiCH(2)SiMe(3), affords the high-valent homoleptic U(V) alkyl complex [Li(THF)(4)][U(CH(2)SiMe(3))(6)] (1) in 82% yield. In the solid-state, 1 adopts an octahedral geometry as shown by X-ray crystallographic analysis. Addition of 2 equiv of tert-butanol to [Li(DME)(3)][U(CH(2)SiMe(3))(5)] generates the heteroleptic U(IV) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(3)] (2) in high yield. Treatment of 2 with AgOTf fails to produce a U(V) derivative, but instead affords the U(IV) complex (Me(3)SiCH(2))Ag(μ-CH(2)SiMe(3))U(CH(2)SiMe(3))(O(t)Bu)(2)(DME) (3) in 64% yield. Complex 3 has been characterized by X-ray crystallography and is marked by a uranium-silver bond. In contrast, oxidation of 2 can be achieved via reaction with 0.5 equiv of Me(3)NO, producing the heteroleptic U(V) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(4)] (4) in moderate yield. We have also attempted the one-electron oxidation of complex 1. Thus, oxidation of 1 with U(O(t)Bu)(6) results in formation of a rare U(VI) alkyl complex, U(CH(2)SiMe(3))(6) (6), which is only stable below -25 °C. Additionally, the electronic properties of 1-4 have been assessed by SQUID magnetometry, while a DFT analysis of complexes 1 and 6 is also provided.     

Controlled syntheses, characterization, and reactivity of neutral and anionic lanthanide amides supported by methylene-linked bis(phenolate) ligands

A series of neutral and anionic bis(phenolate) lanthanide amides were synthesized by general metathesis reactions, and their reactivity was explored. Protolytic ligand exchange reactions of MBMPH2 (MBMP = 2,2'-methylene bis(6-tert-butyl-4-methyl-phenolate)) with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 (TMS = SiMe3) afforded the desired bridged bis(phenolate) lanthanide chlorides [(MBMP)Ln(mu-Cl)(THF)2]2 [Ln = Nd (1), Yb (2)] in high isolated yields. These lanthanide chlorides were found to be useful precursors for the synthesis of the corresponding lanthanide derivatives. Reactions of 1 and 2 with 2 equiv of NaN(TMS)2 in THF produced the expected neutral bis(phenolate) lanthanide amido complexes (MBMP)Ln[N(TMS)2](THF)2 [Ln = Nd (3), Yb (4)] in high yields. Whereas the reactions of 1 and 2 with LiN(TMS)2 in a 1:4 molar ratio gave the anionic bis(phenolate) lanthanide amides as discrete ion-pair complexes [Li(THF)4][(MBMP)Ln{N(TMS)2}2] [Ln = Nd (5), Yb (6)] in high isolated yields. Further study revealed that 5 and 6 can also be conveniently synthesized in high yields by the direct reactions of MBMPH2 with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 in a 2:1 molar ratio, and then with 4 equiv of nBuLi. The reactivity of the neutral and anionic bis(phenolate) lanthanide amides was comparatively investigated. It was found that the insertion reactions of carbodiimide into the Ln-N bond of neutral lanthanide amido complexes 3 and 4 gave the anticipated bis(phenolate) lanthanide guanidinate complexes [(mu-O-MBMP)Nd{(iPrN)2CN(TMS)2}]2 (7) and (MBMP)Yb[(iPrN)2CN(TMS)2] (8), respectively, in high yields, whereas the similar reaction of carbodiimide with anionic amido complex 5 provided the unexpected ligand-redistributed products, and the homoleptic ion-pair bis(phenolate) neodymium complex [Li(DME)2(THF)][(MBMP)2Nd(THF)2] (9) was finally isolated as one of the products. Furthermore, the anionic bis(phenolate) lanthanide amides showed higher catalytic activity for the polymerization of epsilon-caprolactone than the neutral ones. All of the complexes were characterized with elemental analysis and IR spectra, and the definitive molecular structures of 1-3 and 5-9 were provided by single-crystal X-ray analyses.