发电机粗晶钢护环的不拆卸超声波探伤方法

本文提出的探伤方法是以晶界回波为参照确定探伤及判伤灵敏度;采用非粗晶钢(普通碳钢)材料代替粗晶钢材料制作标准试块;用声程定位法鉴别真伪缺陷;用晶界回波估测晶粒度;根据波长与晶粒直径的比值选取最佳探伤频率等.应用本方法发现9台机组护环内壁上的应力腐蚀小裂纹.     

自感系数的一种计算方法

本文提供了一种计算一般电路自感系数的方法。     

超声探伤信号的人工神经网络识别

粗晶奥氏体不锈钢的超声探伤受到能否有效区分有用信号与背影噪声的限制，目前人们大多倾向使用频率分隔来提高缺陷回波比例。本文则介绍一种用傅里叶变换作特征提取，用前馈网络自动识别奥氏体钢中缺陷信号的方法。在作者的实验中，这种方法的正确识别率达到９０％。     

求解一阶电路对任意信号响应的一种方法

提出一种求解任意信号作用下的一阶电路响应的方法．利用三要素法求其阶跃响应和零输入响应，再利用卷积得出结果．方法简洁方便．     

求解一阶电路对任意信号响就的一种方法

提出一种求解任意信号作用下的一阶电路响应的方法，利用三要素法求其阶跃响应和零输入响应，再利用卷积得出结果，方法简洁方便。     

一种简化复杂电路的简易有效方法

在"恒定电流"这一章中部分电路结构较为复杂,给教师讲解、学生解题带来一定困难.有些电路不容易看出电路的构成,虽能用电流分支法或者等电势点排列法等不同方法来分析讲解,但还不能从根本上简化;有相当一部分学生花费很多时间和精力还是不容易理解、掌握.笔者对此曾反复思考,发现用数学的"割补法"简化似乎更加简易、有效.     

校准电表的一种方法

利用电位差计的高精度，设计出合理的实验电路对C31型电表进行校准，使得电表的准确度等级得以提高。     

铁磁材料动态磁滞回线测绘方法的优化设计

文中介绍一种涉及铁磁材料动态磁滞回线测绘方法的优化设计.该设计能观察和测绘硬、软磁样品的动态磁滞回线,观察、测绘速度快,方法简便,检测有关数据较准确.     

一种基于2D-CNN的激光超声表面缺陷检测方法

激光超声表面缺陷检测的过程中,缺陷的定量表征通常依赖于操作者的判断,易受到人为因素干扰,致使检测结果不稳定.针对这一问题,提出一种基于图像识别的二维卷积神经网络(2D-CNN)的缺陷自动分类检测方法.利用有限元方法模拟激光超声检测过程,并采集超声信号数据用于训练分类模型;使用连续小变换(CWT)处理超声信号得到小波时频...     

The improved defects detection method of optical fiber winding

The paper discusses mainly how to check the defects such as fiber-stacking fiber-cut and fiber-uneven with an improved method in the process of fiber optic gyroscope coil winding. In the paper, it is aimed at the gray level image of optic fiber coil winding to get binary image using mathematical morphology and to get optic fiber position image using the improved moving target detection algorithm, on the base of the optic fiber position image, to figure out the relative position of adjacent optic fiber. Through the value of the relative position of adjacent optic fiber, the status of optic fiber winding can be estimated. Experimental results show that the entire image processing and defect detection method can effectively distinguish the defects in the process of optical fiber coil winding.     

基于分布式超声无损检测方法的零件内部缺陷检测

超声检测广泛应用于工业检测,比如超声相控阵检测法和超声A扫应用于零件内部缺陷检测。然而,这些方法可以检测出缺陷位置却很难精确地检测缺陷尺寸,缺陷定量成了急需解决并且很有意义的问题。本文提出了一种分布式超声无损检测方法,将超声探头均匀布置在检测表面,每一个超声探头可以同时发射和接收超声信号,通过对接收到的信号进行处理来重构缺陷轮廓。基于分布式超声无损检测方法,重构零件的人造缺陷并建立相应的声学仿真模型。通过多项式拟合法和聚类法分别处理实验和仿真所获得的数据并重构缺陷轮廓。实验结果和仿真结果显示重构的椭圆形缺陷和正方形缺陷具有一定的精度。结果表明分布式超声无损检测方法有潜在的应用价值和理论意义。     

车辆轮对踏面缺陷的光电检测方法研究

铁路车辆轮对踏面的擦伤与剥离是车辆在运行过程中形成的一种常见的不规则表面缺陷,是轮对检修过程中必须检测的一个项目。提出了一种利用光电技术非接触测量此表面缺陷的方法。该方法在轮对旋转条件下,用精密激光位移传感器对踏面进行快速扫描,采集值经处理后被转换为数字图像,再通过图像处理识别是否存在表面缺陷。必要时通过对缺陷部位的往复扫描,更准确识别出擦伤与剥离是否超出段修限度。该方法可有效检测出踏面缺陷,重复性好,可满足车辆段修现场使用要求。     

A novel source of atomic hydrogen for passivation of defects in silicon

Palladium membranes have been used for decades for the separation of hydrogen from other gasses. In this letter the use of thin palladium leaves to act as sources of atomic hydrogen for silicon samples is explored. It has been assumed in the past that although hydrogen diffuses through palladium in atomic form, the atoms recombine to form molecular hydrogen at the surface. In this letter it is shown that hydrogen supplied to one surface of a palladium leaf can result in atomic hydrogen being released from the opposite surface at low pressure. This is demonstrated through the use of a palladium leaf in a direct plasma system which allows for atomic hydrogen to be supplied to a sample while avoiding exposure to UV radiation from the plasma and high energy charged particles. This method is shown to provide significant atomic hydrogen to silicon samples and improve passivation of silicon surfaces. Method of Shielded Hydrogen Passivation: Schematic of direct plasma chamber with a shield inserted between the plasma and the silicon sample.     

A novel method for crack detection in beam-like structures by measurements of natural frequencies

A novel method is proposed for calculating the natural frequencies of a multiple cracked beam and detecting unknown number of multiple cracks from the measured natural frequencies. First, an explicit expression of the natural frequencies through crack parameters is derived as a modification of the Rayleigh quotient for the multiple cracked beams that differ from the earlier ones by including nonlinear terms with respect to crack severity. This expression provides a simple tool for calculating the natural frequencies of the beam with arbitrary number of cracks instead of solving the complicated characteristic equation. The obtained nonlinear expression for natural frequencies in combination with the so-called crack scanning method proposed recently by the authors allowed the development of a novel procedure for consistent identification of unknown amount of cracks in the beam with a limited number of measured natural frequencies. The developed theory has been illustrated and validated by both numerical and experimental results.     

扬声器异常音的快速检测方法及其实验研究

提出了一种对扬声器声响应中的低阶次谐波失真与高阶次谐波失真和进行综合分析的方法,以实现对扬声器异常音的快速检测。文章分析了扬声器异常音的时域和频域特征,并对人耳听测异常音的机理进行了讨论。通过对扬声器系统Volterra建模并选择连续对数扫频信号作为激励信号,推导出了该模型在此激励下的响应表达式.该表达式揭示了提取各阶冲激响应的方法,由该表达式给出一种可以快速提取各阶次谐波失真的跟踪滤波器,以实现对扬声器异常音的检测。实验室测试和多次工厂生产线测试初步验证了该方法的准确性、快速性和可行性。     

激光超声检测带过渡圆角平板表面缺陷的数值研究

为了研究激光激发出的超声波在带过渡圆角的金属平板上的传播规律和检测表面缺陷的方法,采用有限元法模拟了该类平板中的激光超声现象,分析了表面波在圆角区域的传播规律和与表面缺陷的作用过程。数值结果表明:激光激发出纵波、横波和Rayleigh波等,其中Rayleigh波主要存在于表面mm量级,并且在过渡圆角处发生模式转换生成了直达波R′和模式转换波R_R等多种表面波;经过过渡区域后的声波在表面缺陷处发生了反射和透射现象,通过B扫图可以检测缺陷的位置。随着缺陷深度的增加,表面波的透射系数不断减小,且透射波R_t和R_st存在0.5 μs左右的到达时间差,该时间差与缺陷深度近似成线性正相关。数值结果为激光超声检测带过渡圆角的平板表面缺陷提供了有价值的参考。     

On the characterisation of interfacial defects using high resolution electron microscopy

The characterisation of line defects in interfaces, observed using high-resolution electron microscopy, is discussed. Characterisation is carried out by mapping a closed circuit initially constructed around a defect into a reference space. This process has been generalised to incorporate operations other than translations, and has also been expressed mathematically, and thereby related to recent developments based on symmetry theory. Examples of the characterisation of dislocations in twin interfaces in hexagonal-close-packed crystals and an interfacial dispiration are presented as illustrations.     

水下多目标方位的联合检测与跟踪

针对水下多目标方位跟踪及航迹关联问题,提出了一种粒子滤波的联合检测与跟踪方法.该方法在状态滤波过程中不需要方位观测值的输入,直接根据波束能量评估粒子的似然函数;利用交叉和变异算子进化小权值样本,通过低差异性序列的重采样提高子代粒子多样性。实现了多目标的跟踪并避免了方位观测量与多目标航迹关联的问题。仿真结果表明,在航迹断续和航迹交叉的情况下,该方法能够连续准确地跟踪目标方位。利用水下无人平台舷侧线阵的试验数据对算法性能进行了验证,正横方向的跟踪误差在3°以内;在目标运动模型失配时仍可以收敛到正确的方位航迹,没有出现错跟与失跟现象,可提高对交叉、汇聚及分离的多目标方位航迹的连续检测与跟踪能力.