Exposure to 2,4- and 2,6-toluene diisocyanate (TDI) during production of flexible foam: determination of airborne TDI and urinary 2,4- and 2,6-toluenediamine (TDA)

Occupational exposure to 2,4- and 2,6-toluene diisocyanate (2,4- and 2,6-TDI) was measured during the production of flexible foam. The usefulness of urinalysis of the TDI-derived amines, 2,4- and 2,6-toluenediamine (2,4- and 2,6-TDA), for exposure assessment was compared with air monitoring. Urine samples were collected from 17 employees at two plants. The workers' personal exposure was measured using 1-(2-methoxyphenyl)-piperazine (2MP)-impregnated glass fibre filters for sampling and high-performance liquid chromatography (HPLC) with ultraviolet (UV) and electrochemical (EC) detection for quantification. The limit of detection (LOD) of 2,4- and 2,6-TDI was 0.01 microtg ml(-1) for a 20 microl injection. The precision of sample preparation, expressed as the relative standard deviation (RSD), was 0.6% with UV detection and 0.8% with EC detection at a 2,4-TDI concentration of 0.2 microg ml(-1) (n = 6). For 2,6-TDI, the corresponding RSDs were 0.5% and 0.8%. The urinary 2,4- and 2,6-TDA metabolites were determined after acid hydrolysis as heptafluorobutyric anhydride derivatives by gas chromatography-mass spectrometry. The LOD in urine was 0.35 nmol l(-1) for 2,4-TDA and 0.04 nmol l(-1) for 2,6-TDA. The precision (RSD) of six analyses of human urine spiked to a concentration of 100 nmol l(-1) was 3.7% for 2,4-TDA and 3.6% for 2,6-TDA. There was a trend for linear correlation between urinary TDA concentration and the product of airborne TDI concentration and sampling time. Urinalysis of TDA is proposed as a practical method for assessing personal exposures in workers exposed intermittently to TDI.     

Comparison of denuder and impinger sampling for determination of gaseous toluene diisocyanate (TDI)

An air-sampling method employing denuders coated inside with a chemisorptive stationary phase has been evaluated for analysis of the hazardous gaseous 2,4 and 2,6 isomers of toluene diisocyanate (TDI). The denuder stationary phase consisted of polydimethylsiloxane (SE-30) to which dibutylamine (DBA) was added as a reagent for derivatization of TDI. The accuracy and precision of sampling by means of denuders were shown to differ only slightly from those of the established impinger method. The denuder method was, however, also shown to be suitable for long-term measurements (up to 8 h). The limit of determination (LOD) of the method, including LC-APCI-MS-MS analysis, was found to be 1.9 microg m(-3) and 1.2 microg m(-3) for 2,4- and 2,6-TDI, respectively, for short-term measurements (15 min). Significant lower LOD was obtained for long-term measurements. This is well below the Occupational Safety and Health Administration (OSHA) 8-h TWA (time-weighted average) exposure limit, which is 40 microg m(-3) for the sum of the TDI isomers. The denuder method was also found to be robust and easy to handle. The samplers can be prepared several days before sampling with no loss in performance. The contents of denuders should, on the other hand, be extracted immediately after sampling to prevent degradation of the isocyanate derivatives formed.     

Aspects of quality assurance in the determination of 2,4-toluene diisocyanate by HPLC

Summary In order to optimize accuracy in the determination of 2,4-toluene diisocyanate (TDI) the behaviour of a permeation tube was examined, a sampling device for isocyanates was tested and comparative measurements with different analytical methods were carried out. The investigations have shown that the sampling technique is suitable for collection of very low concentrations of isocyanates.Dedicated to Prof. Dr. E. Lahmann on the occasion of his 65th birthday     

Molecules of synthesized phthalocyanine as a material for the detection of 2,4-toluene diisocyanate (TDI)

Various numbers of LB monolayers of a metal-free phthalocyanine derivative, A410H₂Pc, have been deposited onto ultrasonically cleaned quartz substrates with platinum interdigitated electrodes. Similar devices i.e. those with the same number of LB layers, show the same response characteristics in the presence of 35 ppb (0.035 ppm) toluene diisocyanate (TDI)—a toxic substance used in the production of plastics and found in certain types of paint. The response times of the LB devices studied so far have been calculated to be about 40s. The electrical properties of evaporated films of a metal-free phthalocyanine derivative, α-H₂Pc, and those of the A410H₂Pc LB films have been found to be similar. The response time for the evaporated films has been found to be much less that that for the LB films. Although a direct comparison cannot be made between the LB and evaporated films, in this case, results suggest that devices fabricated from evaporated films will be much faster at detecting the presence of TDI than devices fabricated from LB films.     

Study of slabstock flexible polyurethane foams based on varied toluene diisocyanate isomer ratios

The morphological features of three flexible slabstock polyurethane foams based on varied contents of 2,4 and 2,6 toluene diisocyanate (TDI) isomers are investigated. The three commercially available TDI mixtures, that is, 65:35 2,4/2,6 TDI, 80:20 2,4/2,6 TDI, and 100:0 2,4/2,6 TDI were used. The foams were characterized at different length scales with several techniques. Differences in the cellular structure of the foams were noted with scanning electron microscopy. Small‐angle X‐ray scattering was used to demonstrate that all three foams were microphase‐separated and possessed similar interdomain spacings. Transmission electron microscopy revealed that the aggregation of the urea phase into large urea‐rich regions decreased systematically on increasing the asymmetric TDI isomer content. Fourier transform infrared spectroscopy showed that the level of bidentate hydrogen bonding of the hard segments increased with the 2,6 TDI isomer content. Differential scanning calorimetry and dynamic mechanical analysis (DMA) were used to note changes in the soft‐segment glass‐transition temperature of the foams on varying the diisocyanate ratios and suggested that the perfection of microphase separation was enhanced on increasing the 2,6 TDI isomer content. The preceding observations were used to explain why the foam containing the highest content of the symmetric 2,6 TDI isomer exhibited the highest rubbery storage modulus, as measured by DMA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 258–268, 2003     

High-performance liquid chromatography of 2,6- and 2,4-diaminotoluene, and its application to the determination of 2,4-diaminotoluene in urine and plasma

2,4-Diaminotoluene is used for the production of industrial dyes, and along with the 2,6-isomer, as an intermediate in the production of polyurethane foams. 2,6- and 2,4-diaminotoluene were resolved as sharp peaks by normal-phase high-performance liquid chromatography in 3 min by an acetonitrile-water-saturated chloroform elution solvent (8:2, v/v) with detection by ultraviolet absorbance at 250 nm. The relationship between peak height and amount injected was linear over a range of 0.025-2 microgram for both compounds. Retention times and peak heights were highly reproducible. Detection was very sensitive, allowing quantitation of 1-2 ng of either compound. Quantitative recovery of 2,4-diaminotoluene from spiked urine and plasma samples was obtained by extraction with methylene chloride.     

A solvent-free sampling method for airborne toluene diisocyanate

Summary A useful method of sampling and measurement of toluene diisocyanate concentration in atmosphere is described. The sampler consists of glass-fibre filters impregnated with the reagent 1-(2-methoxyphenyl)piperazine¹ so that the 2,4 and 2,6 isomers of TDI react to form urea derivatives which are analysed by high performance liquid chromatography in isocratic mode on cyan-amino and C₁₈ bonded phases. A dynamic system was used to generate standard atmospheres of TDI and to validate the sampling method within the humidity range of 0% to 75%. A coated filter, a bubbling solution and an impregnated silica gel were compared as samplers requiring the piperazine reagent in performance experiments.     

Development of an Ion-pair HPLC method for the determination of 2,4- and 2,6-toluendiamine in human plasma

Summary An ion-pair HPLC method is presented for the determination in plasma of 2,4- and 2,6-toluendiamine (TDA), known carcinogens. The chromatographic conditions consisted in isocratic elution on a reversed phase C₁₈ column with 5 mM octanesulfonic acid in methanol-water, 45∶55, as mobile phase. UV detection was performed at 235 nm. Samples were analyzed after a simple single step liquid-liquid extraction and the method was validated by measurement of precision (interassay and intraassay), sensitivity, specificity, linearity, and recovery. The detection limit for both TDAs in plasma was 20 ng mL⁻¹. The correlation coefficients based on the intrassay calibration curve were 0.998 and 0.997 for 2,6- and 2,4-TDA, respectively. The intraassay accuracy, expressed in terms of recovery, was found to be up to 89.91% and 97.05% for 2,6- and 2,4-TDA, respectively.     

2,4-/2,6-二氨基甲苯在D151树脂上的吸附分离

从10种树脂中筛选出D151树脂对2,4-二氨基甲苯和2,6-二氨基甲苯的吸附分离及其热力学性质进行了研究。 测定了吸附等温线,Freundlich模型对实验的拟合度大于Langmuir模型,其相关系数大于0.99。 热力学研究结果表明,在293～313 K条件下,初始质量浓度为60～80 g/L时,2,4-二氨基甲苯的吸附焓变为-4.3490～-5.7558 kJ/mol,自由能变为-0.2911～-1.0346 kJ/mol,吸附熵变为-12.965～-16.150 J/(mol·K);而2,6-二氨基甲苯的吸附焓变为-2.9645～-3.6054 kJ/mol,自由能变为-0.1610～-0.6384 kJ/mol,吸附熵变为-7.939～-11.005 J/(mol·K)。 进一步研究了D151树脂对二氨基甲苯的动态吸附分离,可以将2,6-二氨基甲苯含量从20%提高至99.93%,将2,4-二氨基甲苯含量从80%提高至99.42%。     

Ferrocenoyl piperazide as derivatizing agent for the analysis of isocyanates and related compounds using liquid chromatography/electrochemistry/mass spectrometry (LC/EC/MS)

Ferrocenoyl piperazide is introduced as a new pre-column derivatizing agent for the analysis of various isocyanates in air samples using reversed-phase liquid chromatographic separation, electrochemical oxidation/ionization, and mass spectrometry. The nonpolar derivatives can be separated well using a phenyl-modified stationary phase and a formic acid/ammonium formate buffer of pH 3, which yields excellent separations, especially for one problematic group of isocyanates consisting of 2,4- and 2,6-toluylenediisocyanate (2,4- and 2,6-TDI) and hexamethylenediisocyanate (HDI). Electrochemical oxidation at low potentials (0.5 V versus Pd/H(2)) leads to formation of charged products, which are nebulized in a commercial atmospheric pressure chemical ionization (APCI) source, with the corona discharge operated only at low voltage. Limits of detection between 6 and 20 nmol/L are obtained for the isocyanate derivatives, and calibration is linear over at least two decades of concentration. The method is applied for the analysis of air after thermal degradation of a polyurethane foam, and it is demonstrated that it is suitable as well for the analysis of carboxylic acid chlorides and of isothiocyanates.     

Fire- and heat-resistant adhesive resins based on maleimido and citraconimido substituted 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes

A novel class of fire- and heat-resistant bisimide resins was prepared by thermal polymerization of maleimido or citraconimido derivatives of 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes (1). The neat bisimide resin prepared by curing 1-[di(2-chloroethoxyphosphinyl)methyl]-2,4- and -2,6-bismaleimidobenzene exhibited a limiting oxygen index 75% higher and smoke evolution about 30 times lower compared with the parent polymer obtained by curing m-phenylenebismaleimide. The char yield of cured bisimide resins at 700°C was 58–70% in a nitrogen atmosphere and 35–60% in air. An increase in formula weight between the imide groups slightly reduced the char yield. The polymer precursors were synthesized by reacting the phosphorus-containing diamines (1) (1 mol) with maleic anhydride/citraconic anhydride (2 mol) or by reacting the monomaleimido derivative of (1) with benzophenone tetracarboxylic dianhydride/methylenebis(4-phenylisocyanate) in a 2:1 mole ratio. The monomers were characterized by elemental analysis, Fourier-transform–infrared (FT-IR), proton nuclear magnetic resonance (¹H-NMR) spectroscopy, and gas chromatography–mass spectroscopy (GC-MS). Direct cleavage of the P? C bond and inversion of the synthesis reaction may occur during their pyrolysis. The thermal polymerization of the monomers was investigated by differential scanning calorimetry (DSC). Biscitraconimides are thermally polymerized at a relatively lower temperature than the corresponding bismaleimides.     

Effect of the diisocyanate on the structure and properties of polyurethane acrylate prepolymers

In this study, we investigated the role of diisocyanate on the properties of polyurethane acrylate (PUA) prepolymers based on polypropylene oxide (M̄_n = 2000 g · mol⁻¹). The diisocyanates studied were isophorone diisocyanate, 4‐4′dicyclohexylmethane diisocyanate, and toluene diisocyanate (pure 2,4‐TDI, pure 2,6‐TDI, and a TDI mixture, TDI_tech). The molecular structure of the diisocyanate had a major role on the course of the polycondensation and, more precisely, on the sequence length distribution of the final prepolymer. Moreover, the structural organization of the prepolymer also strongly depended on the nature of the diisocyanate. Two types of behaviors were particularly emphasized. On the one hand, the PUA synthesized from 2,4‐TDI displayed an enhanced intermixing between soft polyether segments and hard urethane groups, as revealed by the analysis of hydrogen bonding in Fourier transform infrared. Consecutively, the glass transition shifted to higher temperatures for these polymers. On the other hand, strong hard–hard inter‐urethane associations were observed in 2,6‐TDI‐based prepolymers; these led to microphase segregation between polyether chains and urethane groups, as revealed by optical microscopy. This inhomogeneous structure was thought to be responsible for the unusual rheological behavior of these PUA prepolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2750–2768, 2000     

A highly sensitive high-performance liquid chromatographic procedure for the determination of isocyanates in air

Summary A sensitive high-performance liquid chromatographic procedure is described to analyse hexamethylene diisocyanate (HDI), 2,4- and 2,6-toluene diisocyanate (TDI), and 4,4-diphenylmethane diisocyanate (MDI) in air. The isocyanates are trapped on a sorbent coated with 1-(2-methoxyphenyl)piperazine (MPP). The resulting derivatives are separated using a column switching technique using either a diode array UV detector or an electrochemical detector. Working ranges are 1–5000 and 0.05–400 pmol for UV and EC detection, respectively. Virtually no breakthrough occurs if an air volume of up to 1500 l is sampled, and relative detection limits between 0.1 and 1 ng/m³ can be achieved. The procedure can be used to determine HDI and MDI in work place atmospheres and indoor air.Dedicated to Prof Dr. E. Lahmann on the occasion of this 65th birthday     

Zur Bestimmung von freien, monomeren Toluylendiisocyanaten und Hexamethylendiisocyanat in Polyurethan(=PUR)-Anstrichstoffen

ZusammenfassungZusammenfassung Es wird über 4 Analysenmethoden zur Bestimmung von kleinen Konzentrationen freier, monomerer Isocyanate [(2,4-,2,6-Toluylendiisocyanat (TDI) und 1,6-Hexamethylendiisocyanat (HDI)] in Polyurethan-Anstrichstoffen berichtet.TDI-Bestimmungen. Colorimetrisch Nach Verseifung der Isocyanate mit Eisessig/Schwefelsäure zu polymeren und monomeren Aminen und Abtrennung der ersteren durch Fällung werden die (monomeren) 2,4,-2,6-Toluylendiamine mit p-Toluyldiazoniumchlorid zu Farbstoffen gekuppelt, deren Extinktionen in einem Photometer bei 470 nm gemessen werden. — Gas-chromatographisch: Die in Benzol gelöste Substanz wird auf einer Säule von 4% Silicongummi SE-30 auf Chromosorb G, AW/DMCS getrennt. Als innerer Standard dient Phenanthren.HDI-Bestimmungen. Dünnschicht-chromatographisch Die Isocyanate werden in benzolischer Lösung mit den aliphatischen Aminogruppen von N-Methyl-N-[4-aminobenzyl]-amin zu Harnstoffen umgesetzt. Nach Trennung an Kieselgel werden die aromatischen Aminogruppen der Derivate diazotiert und mit N-1-Naphthyläthylendiamin zu Azofarbstoffen gekuppelt. Auswertung der HDI-Flecke durch Vergleich mit den Flecken von Standardlösungen. — Destillations-Infrarotspektroskopische Methode: Die Destillation erfolgt nach der ASTM-Methode D 2615-67 T [1]. Im Destillat wird das HDI infrarotspektroskopisch bestimmt: Meßbande 2265 cm^–1.Parallelbestimmungen der TDI- bzw. HDI-Gehalte nach diesen Alternativ-Verfahren ergeben weitgehende Übereinstimmung der Ergebnisse, beim TDI zusätzlich auch mit denen der ASTM-Methode D 2615-67 T.

---

On the determination of free monomeric toluylene diisocyanates and hexamethylene diisocyanate in polyurethane (=PUR) paints

On the Determination of Free Monomerie Toluylene Diisoeyanates and Hexamethylene Diisoeyanate in Polyurethane (= PUR) Paints. Four analytical methods are described for the determination of small concentrations of free monomeric isocyanates [2,4-,2,6-toluylene diisocyanate (TDI), and 1,6-hexamethylene diisocyanate (HDI)] in polyurethane paints.Determination of TDI. Colorimetrically The isocyanates are saponified with glacial acetic acid-sulphuric acid to the polymeric and monomeric amines. The polymeric amines are separated by precipitation and the monomeric amines are coupled with p-toluenediazonium chloride to dyestuffs and their absorbancies are measured by means of a photometer at 470 nm. — GC: The substance is dissolved in benzene and separated on a column of 4% silicone rubber SE-30 on Chromosorb G, AW/DMCS. Phenanthrene is serving as an internal standard.Determination of HDI. TLC The isocyanates are reacted in benzene solution with N-methyl-N-[4-amino-benzyl]-amine to the ureas. After separation on silica gel the aromatic amino-groups of the derivatives are diazotized and coupled with N-[1-naphthyl]-ethylenediamine to the azo dyes. Evaluation of the HDI-spots is performed by comparing with the spots of standard solutions. — Distillation and IR-spectroscopy: The distillation is carried out according to the ASTM-method D 2615-67 T [1]. HDI is determined IR-spectro-scopically in the distillate at 2265 cm^–1.Parallel determinations of the contents of TDI or HDI according to this alternative treatment show a far-reaching agreement of the results. Also the ASTM-method D 2616-67 T is furnishing agreeing results for TDI.

---

---

Für die gewissenhafte Durchführung der Versuche danken wir unseren Mitarbeitern H. Köller, W. Liermann und J. Langohr.     

2,4-Toluene diamines--their carcinogenicity, biodegradation, analytical techniques and an approach towards development of biosensors.

2,4-Toluene diamine (TDA), a class A carcinogen, is a major raw material for the production of toluene diisocyanate (TDI), which is one of the precursors for the production of polyurethane foams (PU). This review deals with 2,4-toluene diamine's (TDA) carcinogenicity, analytical techniques, biodegradation and use as a biosensor for biogenic and synthetic amines, emphasizing various carcinogenicity studies by 2,4-TDA on animals and humans. This review reports some publications of the analysis of body fluid samples of workers from a PU producing factory for presence of TDA and TDI, since TDI gets absorbed into the worker's body, getting metabolized into TDA. Biodegradations of 2,4-TDA by various researchers are reported and also our own research experience with biodegradation of 2,4-TDA using Aspergillus nidulans isolated from soil site at a polyurethane foam dumping site have been discussed in this review. Biosensors for various biogenic and synthetic amines are discussed.     

Investigation of different alcoholic modifiers for the separation and determination of two isomers of dinitrotoluene (2,4 and 2,6) by ion mobility spectrometry

Some alcoholic modifier gases were applied to separate isomer peaks in ion mobility spectrometry (IMS). Different mechanisms have been investigated on the separation, such as collision cross-section and analyte-modifier cluster formation. In this regard, some parameters that affected the cluster formation, such as dipole moment, electron affinity, the position of functional groups, and the modifier structure, were evaluated. On the other hand, some effective experimental parameters, including cell temperature and the flow rates of the drift and modifier gases, were also optimized. The combination of dispersive liquid–liquid microextraction with thin-film evaporation (DLLME-TFE) was used as a sample preparation method for the extraction of 2,4-dinitrotoluene (2,4-DNT) and 2,6-dinitrotoluene (2,6-DNT) isomers (as the target analytes). Isobutanol was selected as the alcoholic modifier to separate the ion molecular peaks of these isomers. The limit of detection and the limit of quantification obtained were 15 and 50 μg L⁻¹, and the linear dynamic range (50–700 μg L⁻¹) with coefficient of determination of 0.9941 and 0.9914 were obtained for 2,4-DNT and 2,6-DNT, respectively. The intra- and inter-day relative standard deviations were obtained between 3% and 5%. For validation of the method, determination of the isomers was accomplished for a red wastewater field sample, resulting in relative recovery values of about 96%.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Enzyme-linked immunosorbent assays for the sensitive analysis of 2,4-dinitroaniline and 2,6-dinitroaniline in water and soil

The development and characterization of one rat monoclonal antibody (mAb) for 2,4-dinitroaniline and of two rat mAbs for 2,6-dinitroaniline are described. With the immunization of rats with 2,4,6-trinitrophenyl-glycylglycine–keyhole limpet hemocyanine (KLH) conjugate one mAb (PK 5H6) has been developed and formatted into a competitive enzyme-linked immunosorbent assay (ELISA). This assay no. 1 is very sensitive for 2,4-dinitroaniline with a test midpoint of 0.24 ± 0.06 μg L⁻¹ (n = 19) in 40 mM phosphate-buffered saline (PBS). A second hapten, 3-(4-amino-2,6-dinitrophenyl)propionic acid, which was also conjugated to KLH and used for the immunization of rats, led to two sensitive ELISAs for 2,6-dinitroaniline in 40 mM PBS with test midpoints of 0.61 ± 0.08 μg L⁻¹ (n = 15; mAb DNT4 3C6; assay no. 2) and 0.94 ± 0.29 μg L⁻¹ (n = 17; mAb DNT4 1A7, assay no. 3). Selectivities of all mAbs were checked with more than 20 compounds, including nitroaromatic compounds, 2,6-dinitroaniline pesticides, and other substituted derivatives of aniline. As very noticeable cross-reactivities, all mAbs recognize 2-chloro-4,6-dinitroaniline, 4-chloro-2,6-dinitroaniline and 2-bromo-4,6-dinitroaniline, the last of these being a major metabolite of the azo dye Disperse Blue 79. As first demonstrations of applications, two ELISAs (assays no. 1 and 2) were used for the analysis of 2,4- or 2,6-dinitroaniline in spiked water and soil samples. Recovery data were determined and the majority of these data were in the range of 90–120%. These assays can contribute to a very cost-effective and environmentally friendly immunochemical surveillance monitoring of environmental samples for contaminations with these compounds. To the best of the authors’ knowledge, these are the first antibodies described for 2,4-dinitroaniline and for 2,6-dinitroaniline.     

2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二噁唑的合成与发光特性

通过对二苯氨基苯甲醛与2,6-二(4-氯甲基苯基)苯并[1-2,4-5]二唑之间的Wittig-Horner反应,设计并合成了一个2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二唑新化合物,目的在于均二苯乙烯分子中同时引入空穴传输和电子传输结构单元,可望提高均二苯乙烯型发光材料的发光强度和光量子效率.采用UV-VisI、R1、HNMR和元素分析等分析方法对合成产物结构进行了确认,并考察了溶剂对其光致发光特性的影响.所合成化合物的相关分析数据表明:1)其分子中的两个均二苯乙烯基均为反式“芪”结构特征;2)随溶剂极性增高,其UV-Vis光谱和荧光光谱的λmax红移;3)可用作蓝色发光材料.     

Synthesis and properties of polyisocyanurate networks based on 2,4-toluene diisocyanate and poly(oxytetramethylene) glycol

With the use of the method of bulk polymerization, network polyisocyanurate polymer materials based on poly(oxytetramethylene) glycol and 2,4-toluene diisocyanate have been synthesized for the first time. To analyze their performance and relaxation mechanism, the mechanical characteristics of polyisocy-anurates are studied. The above polymers show a quasielastic mechanical behavior, even though their elastic modulus is characteristic of the temperature interval where all traditional polymers experience the transition from the glassy state to the rubbery state, and demonstrate a well-pronounced viscoelastic behavior. The proposed procedure for the construction of master curves shows that, in a certain temperature interval, shift factor remains invariable; in other words, it does not depend on temperature.