Defect-induced enhancement of absorption coefficient and electroabsorption properties in GaN/AlGaN centered defect quantum box (CDQB) nanocrystal

In this paper, effect of an introduced cubic defect on electrical and optical properties of cubic quantum dot is studied. Self-consistent solution of the Schrödinger-Poisson equations for evaluation of the proposed complex quantum dot is used. Optical properties (absorption and electroabsorption properties associated with intersublevel transition) of the proposed structure are also investigated using density matrix method. Effects of defect size on energy levels, carrier density, matrix element and optical linear absorption coefficient of centered defect quantum box (CDQB) are examined. It is shown that with increasing the defect size a considerable enhancement in magnitude of the absorption coefficient and also red-shift in resonance frequency are achievable. We show that the CDQB has higher absorption peak (at least 80 times) and tunable absorption spectra, due to increase of the matrix element and modified energy sublevels, compared quantum box structure without defect. Also, it is shown that the defect enhances electroabsorption properties (modulation bandwidth and the maximum variation of absorption peak with external field) of the quantum box structure.     

Laser conditioning and nonlinear absorption of LaF3/MgF2 dielectric multilayers at 193 nm

A sensitive and simple pulsed surface thermal lens (TL) technique is used in situ to investigate the laser conditioning and to measure the nonlinear absorption of LaF₃/MgF₂ dielectric multilayers deposited on CaF₂ substrates at 193 nm. Due to the high single-shot sensitivity of the surface TL technique, the laser conditioning can be monitored from the first shot of irradiation on a shot-by-shot basis. The LaF₃/MgF₂ multilayers show a very strong conditioning effect. The ratio of the absorption before and after the laser irradiation is in the range 4–8 for a highly reflective (LH)²⁰ LaF₃/MgF₂ multilayer, and 3–4 for (1L3H)⁷ and (3L1H)⁷ multilayers. In comparison, a (LH)²⁰ LaF₃/AlF₃ multilayer shows only a weak conditioning effect, with an absorption ratio of approximately 1.4. Our experimental results suggest that the strong conditioning effect of the LaF₃/MgF₂ multilayer is due to the absorption conditioning of the LaF₃ layers. However, the MgF₂ layers are shown to be responsible for the considerable increase in LaF₃ absorption as well as the ability to condition the absorption. The fluoride multilayers present non-negligible nonlinear absorption and the two-photon absorption coefficient of the multilayers is estimated to be approximately 5×10^-7 cm/W. Received: 11 December 2000 / Accepted: 20 February 2001 / Published online: 25 July 2001     

Torsion induced circular dichroism in hexagonal CdS

The influence of the torsion on the absorption properties of hexagonal CdS has been studied in our experiments. The undeformed CdS does not possess circular dichroism (CD) but it manifests linear dichroism (LD). An appearance of CD and a change of LD can be observed in the torsion deformed CdS crystals. The mentioned absorption phenomena occur in the vicinity of the isotropic point (i.p.), the crossing point of the curves of the refractive indicesn ₀() andn _e (). The sign of CD is connected with the direction of the torsional momentM. The magnitude ofM influences the shape of CD spectra as well as the values of LD. The appearance of CD and the change of LD are explained by the torsion induced gyrotropy in the CdS crystals, i.e. by the created chirality in the hexagonal CdS.     

Inhibition of two-photon absorption due to dipole-dipole interaction in nanoparticles

We have investigated the inhibition of two-photon absorption in photonic crystals doped with an ensemble of four-level nanoparticles. The particles are interacting with one another by the dipole-dipole interaction. Dipoles in nanoparticles are induced by a selected transition. Numerical simulations have been performed for an isotropic photonic crystal. Interesting phenomena have been predicted such as the inhibition of the two-photon absorption due to the dipole-dipole interaction. It has also been found that the inhibition effect can be switched on and off by tuning a decay resonance energy within the energy band of the crystal. A theory of dressed states has been used to explain the results.     

Features of the simplest model of second-harmonic magneto-optical Kerr effects

A generalised formalism of characteristic matrices is presented to analyse second-harmonic magneto-optical Kerr effects in an optically anisotropic centrosymmetric ferromagnetically ordered multilayer if its response can be described in terms of electric polarisation. Features of the model associated with ideal (infinitely thin) interfaces are highlighted. These are due to both the existence of two versions of unconventional boundary conditions and an inevitable conventional approach to defining the surface polarisations through the fundamental electric field and surface-susceptibility tensors. New analytical results for linear and second-harmonic Kerr effects are shown to be advantageous for developing an effective algorithm for their numerical simulation. The linear approximation with respect to magnetisation is pursued, thereby also making our results suitable for investigating a great variety of magneto-optical effects and (in the second-harmonic case) effects related to anisotropy. Received: 16 October 2001 / Published online: 24 April 2002     

Optical and structural parameters of the ZnO thin film grown by pulsed filtered cathodic vacuum arc deposition

Transparent conductive ZnO film was deposited on glass substrate by pulsed filtered cathodic vacuum arc deposition (PFCVAD). Optical parameters such as absorption coefficient α, the refractive index n, energy band gap E_g and dielectric constants have been determined using different methods. Kramers-Kronig and dispersion relations were employed to determine the complex refractive index and dielectric constants using reflection data in the ultraviolet-visible-near infrared regions. The spectra of the dielectric coefficient were used to calculate the energy band gap and the value was 3.24 eV. The experimental energy band gap was found to be 3.22 eV for 357 nm thick ZnO thin film. The envelope method was also used to calculate the refractive index and the data were consistent with K-K relation results. The structure of the film was analyzed with an x-ray diffractometer and the film was polycrystalline in nature with preferred (002) orientation.     

A Polydisperse Sphere Model Describing the Propagation of Light in Biological Tissue

A polydisperse sphere model with the complex refractive index is employed to describe the propagation of light in biological tissue. The scattering coefficient, absorption coefficient and scattering phase function are calculated. At the same time, the inverse problem on retrieving the particles size distribution, imaginary part of the refractive index and number density of scatterers is investigated. The result shows that the retrieval scheme together with the Chahine algorithm is effective in dealing with such an inverse problem. It is also clarified that a group of parameters including the scattering coefficient, absorption coefficient and phase function are associated with another group including the refractive index, particle size distribution and number density of scatterers, which is a problem described in two different ways and the anisotropy factor is not an independent variable, but is determined by the phase function.     

Optical limiting in cobalt-doped polyvinylpyrrolidone

The results of optical limiting investigations of cobalt-doped polyvinylpyrrolidone solutions are presented. The optical limiting studies have shown that this process is due to self-defocusing at the wavelength of 1064 nm and also due to reverse saturable absorption and self-defocusing at the wavelength of 532 nm. The results of measurements on the non-linear optical characteristics of organometallic complexes are presented. Received: 10 July 2001 / Revised version: 15 October 2001 / Published online: 29 November 2001     

Laser induced thermal profiles in thermally and optically thin films

The temperature field generated by the weak absorption of a gaussian laser beam in an optically and thermally thin film bounded by two transparent plates is discussed. An analytical solution of the problem is presented together with an algorithm for the numerical integration. The influence of the finite thermal conductivity of the plates is shown in an example.     

Measurement of two-photon absorption using the photo-thermal lens effect

We report on new schemes for pump-probe photo-thermal lens methods aimed for measuring the two-photon absorption coefficient of a given material. We show that by focusing a probe beam in the presence of a nearly collimated pump beam, we create a thermal lens which yields measurement of the two-photon absorption coefficient of nitrobenzene of (3.9 ± 0.3) 10⁻¹⁰ cm/W at 532 nm. We also show that when the pump field is focused in the presence of a nearly collimated probe beam the width of the z-scan signature of a two-photon absorption process is nearly one order of magnitude smaller than that of a one-photon process. We show experimental evidence of the effect obtained for nitrobenzene.     

Ellipsometric characterization of PbI2 thin film on glass

The optical properties of polycrystalline lead iodide thin film grown on Corning glass substrate have been investigated by spectroscopic ellipsometry. A structural model is proposed to account for the optical constants of the film and its thickness. The optical properties of the PbI₂ layer were modeled using a modified Cauchy dispersion formula. The optical band gap E_g has been calculated based on the absorption coefficient (α) data above the band edge and from the incident photon energy at the maximum index of refraction. The band gap was also measured directly from the plot of the first derivative of the experimental transmission data with respect to the light wavelength around the transition band edge. The band gap was found to be in the range of 2.385±0.010 eV which agrees with the reported experimental values. Urbach's energy tail was observed in the absorption trend below the band edge and was found to be related to Urbach's energy of 0.08 eV.     

Assessment of electronic properties of InNxSb1−x for long-wavelength infrared detector applications

This work assesses theoretically the potential of dilute nitride alloys of InN_xSb_1−x for long-wavelength IR applications. A 10-band k.p approximation modified to account for conduction/valence band coupling is implemented to extract the bandgap as a function of the nitrogen concentration in the alloy and the temperature. The calculations show the possibility to obtain a band closure at ∼2% of nitrogen for InSbN at 300 K. The absorption coefficient, and its temperature dependence, is then determined using an Elliot-like formalism, predicting stronger absorption properties associated with the enhancement of conduction band effective masses. This enhancement yields over an order of magnitude increase in the non-radiative Auger recombination lifetimes suggesting the potential of InNSb for significantly enhancing detectivity limits and operation temperatures of long-wavelength IR detectors.     

Electrically controlled optical bandgap in a structurally chiral material

The propagation of light along the axis of non-homogeneity of a structurally chiral medium (SCM) under the influence of a low-frequency (dc) electric field aligned along the same axis is investigated. The Pockels effect is assumed to occur, and the SCM is taken to possess locally a point group symmetry. The frequency-domain Maxwell curl equations are cast in a 4 × 4 matrix representation, and the Oseen transformation is invoked. The band structure is analyzed, as are also the eigenvectors as well as the transfer matrix. Finally, the reflection and transmission of a plane wave due to a SCM of finite thickness is considered. The low-frequency electric field is shown to control the bandgap.     

Anomalous wave propagation in quasiisotropic media

Based on boundary conditions and dispersion relations, the anomalous propagation of waves incident from regular isotropic media into quasiisotropic media is investigated. It is found that the anomalous negative refraction, anomalous total reflection and oblique total transmission can occur in the interface associated with quasiisotropic media. The Brewster angles of E- and H-polarized waves in quasiisotropic media are also discussed. It is shown that the propagation properties of waves in quasiisotropic media are significantly different from those in isotropic and anisotropic media.     

Structural and optical properties of thermal evaporated magnesium phthalocyanine (MgPc) thin films

X-ray powder diffraction (XRD) of MgPc indicated that the material in the powder form is polycrystalline with monoclinic structure. Miller indices, h k l, values for each diffraction peak in XRD spectrum were calculated. Thermal evaporation technique was used to deposit MgPc thin films. The XRD studies were carried out for MgPc thin films where the results confirm the amorphous nature for the as-deposited films. While, polycrystalline films orientated preferentially to (1 0 0) plane with an amorphous background were obtained for films annealed at 623 K for 3 h. Optical properties of MgPc thin films were characterised by using spectrophotometric measurements of transmittance and reflectance in the spectral range from 190 to 2500 nm. The refractive index, n, and the absorption index, k, were calculated. According to the analysis of dispersion curves, the parameters, namely; the optical absorption coefficient (α), molar extinction coefficient (?_molar), oscillator energy (E_os), oscillator strength (f), and electric dipole strength (q²) were also evaluated. The recorded absorption measurements in the UV-vis region show two well defined absorption bands of phthalocyanine molecule; namely the Q-band and the Soret (B-band). The Q-band showed its splitting characteristic (Davydov splitting), and ΔQ was obtained as 0.15 eV. The analysis of the spectral behaviour of the absorption coefficient (α), in the absorption region revealed indirect transitions. The transport and the near onset energy gaps were estimated as respectively 2.74 ± 0.02 and 1.34 ± 0.01 eV.     

Optical characterization of thin thermal oxide films on copper by ellipsometry

A complete optical characterization in the visible region of thin copper oxide films has been performed by ellipsometry. Copper oxide films of various thicknesses were grown on thick copper films by low temperature thermal oxidation at 125 °C in air for different time intervals. The thickness and optical constants of the copper oxide films were determined in the visible region by ellipsometric measurements. It was found that a linear time law is valid for the oxide growth in air at 125 °C. The spectral behaviour of the optical constants and the value of the band gap in the oxide films determined by ellipsometry in this study are in agreement with the behaviour of those of Cu₂O, which have been obtained elsewhere through reflectance and transmittance methods. The band gap of copper oxide, determined from the spectral behaviour of the absorption coefficient was about 2 eV, which is the generally accepted value for Cu₂O. It was therefore concluded that the oxide composition of the surface film grown on copper is in the form of Cu₂O (cuprous oxide). It was also shown that the reflectance spectra of the copper oxide–copper structures exhibit behaviour expected from a single layer antireflection coating of Cu₂O on Cu. Received: 19 July 2001 / Accepted: 27 July 2001 / Published online: 17 October 2001     

Optical Transmittance and Band Gap of Ferroelectric BaTi2O5 Bulk Glass

Optical transmittance and reflectance on ferroelectric BaTi₂O₅ glasses prepared recently by a containerless synthesis technique are measured at room temperature in the wavelength range 190-800nm. The fundamental absorption edge located around 340nm demonstrates the colourless and transparent character of the glass. The optical band gap of 3.32eV has been estimated. The tail of the optical absorption near the fundamental absorption edge is found to follow the Urbach rule. Our analysis of the experimental spectra supports an indirect allowed interband transition between the valence band formed by O-2p orbitals and the conduction band formed by Ti-3d orbitals.     

Reduction of optical absorption at a wavelength of around 0.8 μm in LPE garnet (TmBiCa)3(FeGaPt)5O12

Liquid-phase epitaxy (LPE) garnet films (TmBiCa)₃(FeGaPt)₅O₁₂ have been grown using only Bi₂O₃ as the flux so that the film containing Bi gives high specific Faraday rotation. The film does not contain Pb, which may affect optical absorption. The optical absorption coefficient at 810 nm has been effectively reduced by doping Ca in the melt. Our data show that a minimum level of and of the anisotropy constantK _u and also the maximum of the electrical resistivity are achieved when Ca²⁺ replaces Fe²⁺. Fe²⁺ results from Pt⁴⁺ incorporation in the film due to a Bi₂O₃ flux attack on a Pt crucible. Using a compensated film, of 58 cm^–1 and a figure of merit of 9deg/dB were obtained.     

A novel approach for analyzing open Z-scan experiments

In this work, a novel method for analyzing open Z-scan experiments is presented. It is based on the calculation of the nonlinear absorption parameter q directly from the transmittance measurements. Specifically, we have found an analytic formula describing the dependence of the parameter q on the normalized transmittance. The influence of noise has been studied and the method was proved robust even under conditions of relatively high noise. Extension to the general case of an elliptic Gaussian incident beam has also been realized. The technique has been experimentally tested by analyzing transmittance measurements obtained from a recently synthesized pyrylium salt, illuminated by a femtosecond laser system. The results are in very good agreement with those obtained by the standard Z-scan analysis, especially regarding the nonlinear absorption coefficient β.     

Large Positive and Negative Lateral Displacements from Total Internal Reflection Configuration with a Weakly Absorbing Dielectric Film

It is theoretically shown that the simultaneously large positive and negative lateral displacements will appear when the resonant condition is satisfied for a TE-polarized light beam reflected from the total internal reflection configuration with a weakly absorbing dielectric film. Appearance of the enhanced negative lateral displacement is relative to the incidence angle, absorption of the thin film and its thickness. If we select an appropriate weakly absorbing dielectric film and its thickness, the simultaneously enhanced positive and negative lateral displacements will appear at different resonant angles. These phenomena may lead to convenient measurements and interesting applications in optical devices.