A-site deficient lanthanum-calcium chromite-titanates doped with 3d transition metals: synthesis,oxygen nonstoichiometry,electrical conductivity,and catalytic activity

Six (M = Cr, Mn, Fe, Co, Ni, Cu) and two (M = Ni, Cu) single-phase compositions were prepared by conventional solid-state reactions. Oxygen nonstoichiometry, electrical conductivity, phase transformations under reduction-reoxidation at high temperatures and catalytic activity for hydrocarbons oxidation of these compositions were investigated in a wide temperature and oxygen partial pressure range. The Cu-, Ni-, Co-, and Fe-containing compositions are decomposed in reducing Ar/H₂O/H₂ atmosphere with pH₂O / pH₂ = 0.3 at 1,000 °C, while the Cr- and Mn-containing ceramics remain stable at the same conditions. The metallic particles of the added 3d elements formed after decomposition were registered by X-ray diffraction method in case of Cu- and Ni-containing compositions. These formed composites can be completely reoxidized with formation of initial compositions by treatment in air at 1,000 °C. The electrical conductivity of the ceramics investigated in air and Ar/H₂O/H₂ gas flow increases with rising M content. The highest catalytic activity for oxidation of CH₄ and C₃H₆, which was comparable with the activity of the composite, shows the Cu-containing powders. Dedicated to Prof. Dr. Werner Weppner     

A theoretical study of the structure and stability of borohydride on 3d transition metals

The adsorption of borohydride on 3d transition metals (Cr, Mn, Fe, Co, Ni and Cu) was studied using first principles calculations within spin-polarized density functional theory. Magnetic effect on the stability of borohydride is noted. Molecular adsorption is favorable on Co, Ni and Cu, which is characterized by the strong s–d_zz hybridization of the adsorbate-substrate states. Dissociated adsorption structure yielding one or two H adatom fragments on the surface is observed for Cr, Mn and Fe.     

Electronic structure of Ti metal and TiO2 powder studied by hard and soft (Cu Kα1 and Al Kα1) X-ray photoelectron and Auger spectroscopy

High-energy X-ray photoelectron spectroscopy (XPS) is of particular importance for minimizing the effects of surface contamination by increasing photoelectron escape depths. In this study high-resolution high-energy Cu Kα₁ and soft Al Kα₁ XPS and Auger electron spectroscopy were used to compare the electronic structure of Ti in TiO₂ powder and Ti metal. The Ti 1s in TiO₂ XPS line is narrower and more symmetric than in Ti metal. A comparison of the relative intensities of the L₂₃M₂₃M₄₅ and L₂₃M₂₃M₂₃ Auger transitions in Ti metal and TiO₂ is consistent with the expected transfer of Ti 3d electrons away from the Ti site in the oxide. The satellites accompanying the Ti 1s XPS line excited by Cu Kα₁ X-rays occur at the same energies as the satellites accompanying the Ti 2s and 2p XPS lines excited by Al Kα₁ X-rays indicating that they do not depend on the core-level, the experimental resolution or inelastic scattering processes.     

Spin‐polarized electron gas in Co2M Si/SrTiO3 (M = Ti,V, Cr,Mn, and Fe) heterostructures

Spin‐polarized density functional theory is used to study the TiO₂ terminated interfaces between the magnetic Heusler alloys Co₂Si (M = Ti, V, Cr, Mn, and Fe) and the non‐polar band insulator SrTiO₃. The structural relaxation at the interface turns out to depend systematically on the lattice mis‐ match. Charge transfer from the Heusler alloys (mainly the M 3d orbitals) to the Ti d_xy orbitals of the TiO₂ interface layer is found to gradually grow from M = Ti to Fe, resulting in an electron gas with increasing density of spin‐polarized charge carriers. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

YBa2(Cu0.95M0.05)3O7-δ的代换效应及其中子衍射研究

X射线衍射实验表明YBa₂(Cu_0.95M_0.05)₃O_7-δ(M=Ti,V,Cr,Mn,Fe,Co,Ni,Cu和Zn)均为单相结构。Fe,Co,Ni和Zn对Cu的替代使超导临界温度T_c显著下降,而同样含量的Ti,V,Cr,Mn对Cu的替代并未对超导性能产生显著影响。并利用中子衍射分析了Ti,Mn,Fe和Co对Cu原子的取代,发现代换原子对Cu的两个晶位各自存在不同的择优占据 关键词：     

Features of hydrogen interaction in the Pd-based alloys with 3d transition metals

The effect of an alloying metal and its magnetic state on the hydrogen absorption energy has been investigated in the Pd-based alloys Pd₃Me with 3d transition metals (Me = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) using calculations from first principles. The full-potential and linearly augmented plane wave (FP LAPW) method has been used in the local density approximation (LDA) for the exchange-correlation potential in the framework of the density functional theory (DFT). It has been found that the hydrogen solubility in an alloy increases if the centers of mass of s and d metal bands and s hydrogen band shift strongly toward the Fermi level. The changes in properties of hydrogen absorption as a function of its position in a crystal lattice structure and magnetic state of an alloy have been analyzed.     

Mo¨ssbauer study of iron sulfides doped with 3d-transition metals

It is found by Mo¨ssbauer measurements on M_0.025Fe_0.975S (M=Sc, Ti, V, Cr, Mn, Co, Ni, Cu) that the 3d-transition metal impurities profoundly affect both the crystallographic and spin rotation transitions of iron sulfide.It is noteworthy that both V_0.025Fe_0.975S and Co_0.025Fe_0.975S have Morin transition temperatures T_M which are distinctly different from that of FeS; furthermore, the directions of changes of T_M are opposite for V_0.025Fe_0.975S and Co_0.025Fe_0.975S.A vanadium impurity of 2.5% of the metal atoms in the iron sulfide makes the crystallographic transition take place rapidly in a narrow temperature region of about 15 K, while the α transition in FeS takes place over a wide temperature range of about 200 K.It is also found that the α transition for V_0.025Fe_0.975S has a hysteresis width of 5 K.     

Orbital moments of 3d adatoms and Co nanostructures on Cu(0 0 1) surfaces

We use ab initio calculations to investigate spin and orbital moments of 3d transition-metal adatoms and Co nanostructures on Cu(0 0 1) surfaces. For Fe and Co adatoms on Cu(0 0 1) we predict extremely large orbital moments, comparable to the spin moments at these sites. For Mn and Cr adatoms the orbital moments are extremely small and can be neglected in face of their rather large spin moments. Ni adatoms on Cu(0 0 1) were found to be non-magnetic. Our investigations for adsorbed flat clusters of Co on Cu(0 0 1) address the persistence and extent of these large orbital moments in the clusters as a function of their size. We find that, the average orbital moment (M_orb) per Co atom is strongly correlated with the coordination number, decreasing drastically and monotonically as the average number of first Co neighbors around the sites in the cluster (N_Co) is increased.     

ESCA studies of Cu,Cu2O and CuO

Cu 2p, Cu 3d and O 1s electron spectra and Cu L₃M_4,5M_4,5 Auger electron spectra from Cu, Cu₂O and CuO have been studied at 25°C and at 400°C. The height of the Cu 2p satellite peaks from copper oxides was lowered when the temperature was raised. The intensity of the satellites also decreased if the sample stayed in vacuum for prolonged periods.Two commercial cuprous oxides were different with respect to the behaviour of the satellite peaks. One produced very weak satellites, while the other produced strong ones as previously reported in the literature for cuprous oxide. The colour of the oxides was slightly different, indicating that the stoichiometry was not the same.The change in satellite intensity is accompanied by changes in oxygen spectra, Cu L₃M_4,5 M_4,5 Auger spectra and valence band spectra.It is useful to study Auger electrons in addition to the direct electron spectrum, since Auger signals can be more sensitive to surface conditions than direct electron spectra.     

Interpretation of Auger satellites in Co,Ni, and Cu compounds

X-ray photoelectron spectra of the 2p levels of Co, Ni, and Cu compounds are examined concurrently with their L₃M_4,5M_4,5 Auger spectra. A correlation is established between the presence or absence of Auger satellites with the presence or absence of photoelectron shake-up satellites for Co and Ni compounds. The correlation is less clear for cupric compounds. We propose the mechanism of Auger shake-up as a plausible interpretation for the observed behavior of these Auger satellites.     

Magnetic properties of 3d transition metal monolayers on metal substrates

We report results of systematic calculations for magnetic properties of 3d transition metal monolayers on Pd(001) and Ag(001). We find large similarities to interactions of magnetic 3d impurities in the bulk. Therefore the overlayer results are supplemented with results for 3d dimers in Cu, Ag, and Pd. Differences between the two classes of systems are utilized to reveal the interaction within the overlayers and between overlayers and substrates. In virtually all cases we find both ferromagnetic and antiferromagnetic solutions, showing large magnetic moments and similar densities of states. From the trend of the calculations we conclude that V, Cr, and Mn overlayers favor the antiferromagnetic c(2×2) structure, while Ti, Fe, Co, and Ni prefer the ferromagnetic one.     

Site preference and elastic properties of ternary alloying additions in B2 YAg alloys by first-principles calculations

First-principles calculations were preformed to study the site preference behavior and elastic properties of 3d (Ti–Cu) transition-metal elements in B2 ductility YAg alloy. In YAg, Ti is found to occupy the Y sublattice whereas V, Cr, Co, Fe, Ni and Cu tend to substitute for Ag sublattice. Due to the addition of 3d transition metals, the lattice parameters of YAg is decreased in the order: V<Cu<Cr<Ni<Co<Fe<Ti. The calculated elastic constants show that Cr, Fe, Co and Cu can improve the ductility of YAg alloy, and Fe is the most effective element to improve the ductility of YAg, while Ti, Ni and V alloying elements can reduce the ductility of YAg alloy, especially, V transforms ductile into brittle for YAg alloy. In addition, both V and Ni alloying elements can increase the hardness of YAg alloy, and Y₈Ag₇V is harder than Y₈Ag₇Ni.     

Co和稳定元素对Nd3(Fe,Co,M)29(M=Ti,V,Cr) 化合物结构和磁性的影响

利用x射线衍射和磁测量研究了不同稳定元素Co以及Ti,V和Cr替代对Nd₃Fe_29-x-yCo_xM_y(M=Ti,V,Cr)化合物结构和磁性的影响.研究发现:每一个稳定元素都有一替代量极限,在此极限以内所有化合物均为Nd₃(Fe,Ti)₂₉型结构,A2/m空间群.不同稳定元素的溶解极限不同.Co的替代量与稳定元素有关,当以Cr作为稳定元素时,Cr的替代量随着Co含量的提高而提高 关键词： 3(Fe')" href="#">Nd₃(Fe Co 29')" href="#">M)₂₉ 结构 磁性     

The behavior of 3d electrons and defects in TiAl-based alloys containing V and Cu studied by positron annihilation

Information of defects and 3d electrons in transition metals (Ti, V, Cu) and TiAl-based alloys (Ti₅₀Al₅₀, Ti₅₀Al₄₈V₂, Ti₅₀Al₄₈Cu₂) can be extracted from the positron lifetime and coincidence Doppler broadening spectra. The results show that the 3d electron signals for the transition metals Ti, V and Cu increase with the number of 3d electrons. The 3d electron signal and the electron density for binary TiAl alloy are relatively low due to the (Ti)3d-(Al)3p interactions. The addition of V and Cu atoms to TiAl alloy leads to the increase in the electron densities in bulk and the defects on grain boundaries simultaneously, as well as the enhancement of the 3d electron signal. The 3d electron signal in the spectrum of Ti₅₀Al₄₈Cu₂ alloy is higher than that of Ti₅₀Al₄₈V₂ alloy.     

Chiral structures and tunable magnetic moments in 3d transition metal doped Pt6 clusters

The structural, electronic, and magnetic properties of transition metal doped platinum clusters MPt6 （M=Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn） are systematically studied by using the relativistic all-electron density functional theory with the generalized gradient approximation. Most of the doped clusters show larger binding energies than the pure Pt7 cluster, which indicates that the doping of the transition metal atom can stabilize the pure platinum cluster. The results of the highest occupied molecular orbital （HOMO） lowest unoccupied molecular orbital （LUMO） gaps suggest that the doped clusters can have higher chemical activities than the pure Pt7 cluster. The magnetism calculations demonstrate that the variation range of the magnetic moments of the MPt6 clusters is from 0 μB to 7 μB, revealing that the MPt6 clusters have potential utility in designing new spintronic nanomaterials with tunable magnetic properties.     

内掺过渡金属非典型富勒烯M@C22(M=Sc, Ti, V, Cr, Mn, Fe, Co, Ni) 几何结构、电子结构、稳定性和磁性的密度泛函研究

采用密度泛函理论中广义梯度近似对非典型富勒烯C₂₂和过渡金属内掺衍生物M@C₂₂(M=Sc,Ti,V,Cr,Mn,Fe,Co和Ni)的几何结构和电子结构进行计算研究.发现非典型富勒烯C₂₂的基态结构是含有一个四碳环的单重态笼状结构.过渡金属原子的掺入明显提高了体系的稳定性. C-M键既有一定共价性又有一定离子性.磁性、能级图、轨道分布和态密度图分析表明: M原子的3d轨道和碳笼的C原子的原子轨道之间存在较强的轨道杂化. Ti, Cr, Fe和Ni内掺的结构出现磁性完全猝灭现象. Sc和碳笼间是弱反铁磁作用, V,Mn和Co与碳笼间是弱铁磁作用.     

Role of multielectron excitations in the L3 XANES of Pd

High resolution L₃ and L₂ XANES (X-ray absorption near edge structure) spectra of Pd metal have been measured at the Frascati synchrotron radiation facility. The L₃ XANES shows an intense 2p → 4d “white line” while at the L₂ a weaker structure appears. A good agreement between L₃ XANES and the one-electron theory of Muller et al. has been found. All the possible final state effects due to the relaxation of the many body system are discussed. No many body effects have been seen on the “white line” at threshold. The intensity ratio between L₃ and L₂ absorption is 2.1 in the high energy range of XANES and it is 2.7 at the white line maximum. A weak broad band extending up to 13 eV and centered at ～ 6 eV above the Fermi level, appearing in the L₃-L₂ difference spectrum, could be tentatively assigned either to the only possible very weak multielectron excitation present in XANES of Pd i.e. the “two hole-two electron” excited state or to the prevalence of the $\text{j}\text{=}\text{5}\text{2}$ total angular momentum for electrons in the 5sp band, hybridized with the 4d band, up to 3 eV above the Fermi level.     

151Eu-Mössbauer investigation in some new ternary Eu2M3Si5 systems (M=Ni,Pd, Cu,Rh)

The series Eu₂M₃Si₅ (M=Ni, Cu, Pd, Rh) have been synthesised for the first time. The Ni, Cu, Pd systems form in U₂Co₃Si₅ type structure.¹⁵¹Eu Mössbauer spectroscopy shows that Eu is in valence fluctuating (VF) state in Ni system, while in Cu and Pd systems it is in stable divalent state. These observations are further confirmed by magnetic susceptibility studies. The material Eu₂Rh₃Si₅ shows two lines in the Mössbauer resonance, one of which shows VF behaviour.     

Energy parameter and the free-atom behavior of Auger spectra

The L₃M₄₅M₄₅ spectra of V and Cr do not exhibit free atom behavior, in sharp contrast to those of Cu and Zn. An energy difference parameter, Δ ?, derived entirely from observable energies, has been introduced to correlate with the extent of electron localization and free-atom behavior in Auger transitions.     

On the Auger-photoelectron coincidence spectroscopy spectra of Cu(100), Cu metal and CuOx/Cu surface

The M₃–VV Auger-photoelectron coincidence spectroscopy (APECS) spectrum of Cu(100) and the L₃–VV APECS spectra of Cu metal and CuOx/Cu surface are analyzed in detail. The narrowing and energy shift of the photoelectron line in the M₃–VV APECS spectrum is well predicted by the present theory. The spectrum shows the presence of the M₂–M₃(V)–VV(V) decay in which a hole in the 4s band hops away prior to the decay of M₃ hole. The analysis of the L₃ photoelectron spectra of Cu metal measured in coincidence with the ³F or ¹G Auger line raises a question concerning the presence of two different core–hole states upon the L₃ level ionization recently proposed by Thurgate and Jiang [Surf. Sci. 466 (2000) L807]. The analysis of the L₃–VV APECS spectrum of CuOx/Cu shows that the final-state charge–transfer interaction plays an important role in CuO.