Overall evaluation for concert hall acoustics

I.IntroductionTherearetwowaysofcvaluatingconcertha1lacoustics.Oneistoevaluatetheacousticalqualityofaconcertha11ateachlistener'spositionrespectively,andtheotheristoevaluatetheacousticalqua1ityofaha1lasawho1e.Bothwaysarebasica1lysimilar.Howcvcr,sincesomcob-icchveparametersmayhavedifTerentvalucsatdifferentpositions,onemustdcfinesuitab1ein-dicestodescribetheseparameters(e.g.meanva1ucsorothers),sothatacomparisonbetweenha1lsbecomcspossib1e,Thispaperdea1swiththelattereva1uationbyusingfuzZysettheory…     

厅堂声学计算机模型的应用(英)

此处所介绍的厅堂声学计算机模型计算了房间和多功能厅的声学响应。这个模型是以房厅的三维表示为基础的。每个墙面都赋予一个吸声系数,并且分成更小的单元。首先计算了单元间影响系数所组成的矩阵。对于给定的声源,可以计算每个单元收到的能量,并由此定出房厅内任一点的声级,这样又能够算出（ａ）随距离变化的衰减,（ｂ）在任一平面上的声照度,和（ｃ）任一点所收到声能的接收指向性．可以算出房厅内任一被选定点的回波图,作为接收器所在地接收指向性随时间的演变;这么一个特点使得有可能核对目视图象和声图象之间的可能不符。这个软件能够设法任意修改房间的形状,以最优化房间的声学特征．本文列举了一个厅堂声学的研究例,是关于沙特拉伯首都Ｒｉｙａｄｈ的 Ａｈｕｒａ主厅的。     

厅堂声学计算机模型的应用(英)

此处所介绍的厅堂声学计算机模型计算了房间和多功能厅的声学响应。这个模型是以房厅的三维表示为基础的。每个墙面都赋予一个吸声系数,并且分成更小的单元。首先计算了单元间影响系数所组成的矩阵。对于给定的声源,可以计算每个单元收到的能量,产由此定出房厅内任一点的声级,这样又能够算出（ａ）随距离变化的衰减,（ｂ）在任一平面上的声照度,和（ｃ）任一点所收到声能的接收指向性。可以算出房厅内任一被选定点的回波图,作     

白瑞奈克教授论音乐厅音质参数

讨论了评价音乐厅音质问题。根据音乐界对各音乐厅的主观评论,把调查过的58个音乐厅排出次弟。提出6个可测量的客观音质参数,并得出主观排列与客观参数的关系。     

Engaging concert hall acoustics is made up of temporal envelope preserving reflections

Strong, exciting, and engaging sound is perceived in the best concert halls. Here, it is shown that wideband early reflections that preserve the temporal envelope of sound contribute to the clear and open acoustics with strong bass. Such reflections are fused with the direct sound due to the precedence effect. In contrast, reflections that distort the temporal envelope render the sound weak and muddy because they partially break down the precedence. The presented findings are based on the earlier psychoacoustics research, and confirmed by a perceptual evaluation with six simulated concert halls that have same monaural room acoustical parameter values according to ISO3382-1.     

Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support

Stage acoustics is an important characteristic for concert halls, both for the acoustic quality on stage and for the audience. However, relatively little research has been conducted into the question. This study was based on the investigation of an actual concert hall stage, that of the Seoul Arts Center Concert Hall in Korea. The stage acoustics was evaluated in the actual hall, and with two models: a 1:25 scale model and a computer model. The study was based on the stage support parameter ST1 proposed by Gade as a measure of support for individual performers [Acustica 65, 193-203 (1989)]. The variation of support was measured on the empty stage of the actual hall and in the two models. The effect of musicians on stage, the effect of moving the orchestra, the effect of ceiling height and of stage-wall profile were also investigated. Conclusions are drawn both relating to the Seoul Concert Hall stage and stages in general.     

广东星海音乐厅室内乐厅的声学设计

室内乐厅是以演奏室内乐为主、兼供独奏(唱)、音乐讲座、文娱演出和立体电影所用的多功能厅堂。为使各项功能均具有最佳的声学条件,设置了用计算机调控混响时间的装置。本文概要介绍室内乐厅的声学设计、但侧重于计算机调控混响时间所取得的成效。     

Design of room acoustics and a MCR reverberation system for Bjergsted concert hall in Stavanger

Bjergsted concert hall in Stavanger, Norway, was opened in 1982 as a multi-purpose hall, but primarily intended for concerts. The hall has been rebuilt from an old dome-shaped exhibition hall. The new shape of the hall was designed using computerized sound ray tracing, in a three-dimensional mathematical model. The hall is fan-shaped and additional lateral reflections are provided by large reflectors hanging freely below the ceiling. Because of the marginal volume per seat and the hall's many light-weight constructions, we have designed, specifically for this hall, an electroacoustic multi-channel reverberation system. This increases the reverberation time over a broad frequency range and, in addition, the sound level is also increased.     

Imaging marine geophysical environments with vector acoustics

Using vector acoustic sensors for marine geoacoustic surveys instead of the usual scalar hydrophones enables one to acquire three-dimensional (3D) survey data with instrumentation and logistics similar to current 2D surveys. Vector acoustic sensors measure the sound wave direction directly without the cumbersome arrays that hydrophones require. This concept was tested by a scaled experiment in an acoustic water tank that had a well-controlled environment with a few targets. Using vector acoustic data from a single line of sources, the three-dimensional tank environment was imaged by directly locating the source and all reflectors.     

Measuring surface pressure with far field acoustics

This paper presents measurements of the wavenumber frequency spectrum of wall pressure fluctuations under a turbulent boundary layer made using sound radiated from hydrodynamically smooth ridges in the surface. The measurements also serve as a test of the scattering theory of roughness noise. The radiated sound reveals a cut through the full three-dimensional wavenumber frequency spectrum of the wall pressure at the wavenumber of the surface. Since ridges can be made with very small wavelengths, this technique can be used to probe the structure of the wall pressure spectrum on scales far smaller than those that can be reached using conventional wall-mounted transducers. Furthermore, the method reveals the wavenumber frequency spectrum directly, without the need for multi-point measurements or the spatial Fourier transforming of data. Measured spectra bear a close similarity to Corcos’ and Chase's model forms, and confirm the applicability of the theory of roughness noise and its prediction of roughness noise directivity.     

复射线法及其在水声技术中的应用

本文介绍复源点射线技术原理,概述各种复射线分析方法,并举例说明这种方法在水声技术中一些可能的应用,包括指向性声场的复射线分析,声辐射器阵列方向性的复射线模拟,近区和远区声场的复射线变换,以及声呐目标强度的复射线理论预估等。     

Multiobjective muffler shape optimization with hybrid acoustics modeling

This paper considers the combined use of a hybrid numerical method for the modeling of acoustic mufflers and a genetic algorithm for multiobjective optimization. The hybrid numerical method provides accurate modeling of sound propagation in uniform waveguides with non-uniform obstructions. It is based on coupling a wave based modal solution in the uniform sections of the waveguide to a finite element solution in the non-uniform component. Finite element method provides flexible modeling of complicated geometries, varying material parameters, and boundary conditions, while the wave based solution leads to accurate treatment of non-reflecting boundaries and straightforward computation of the transmission loss (TL) of the muffler. The goal of optimization is to maximize TL at multiple frequency ranges simultaneously by adjusting chosen shape parameters of the muffler. This task is formulated as a multiobjective optimization problem with the objectives depending on the solution of the simulation model. NSGA-II genetic algorithm is used for solving the multiobjective optimization problem. Genetic algorithms can be easily combined with different simulation methods, and they are not sensitive to the smoothness properties of the objective functions. Numerical experiments demonstrate the accuracy and feasibility of the model-based optimization method in muffler design.     

Supersymmetric quantum hall liquid with a deformed supersymmetry

We construct a supersymmetric quantum Hall liquid with a deformed supersymmetry. One parameter is introduced in the supersymmetric Laughlin wavefunction to realize the original Laughlin wavefunction and the Moore—Read wavefunction in two extremal limits of the parameter. The introduced parameter corresponds to the coherence factor in the BCS theory. It is pointed out that the parameter-dependent supersymmetric Laughlin wavefunction enjoys a deformed supersymmetry. Based on the deformed supersymmetry, we construct a pseudopotential Hamiltonian whose groundstate is exactly the parameter-dependent supersymmetric Laughlin wavefunction. Though the SUSY pseudopotential Hamiltonian is parameter-dependent and non-Hermitian, its eigenvalues are parameter-independent and real.     

Inversion of guided-wave dispersion data with application to borehole acoustics

The problem of inferring unknown geometry and material parameters of a waveguide model from noisy samples of the associated modal dispersion curves is considered. In a significant reduction of the complexity of a common inversion methodology, the inner of two nested iterations is eliminated: The approach described does not employ explicit fitting of the data to computed dispersion curves. Instead, the unknown parameters are adjusted to minimize a cost function derived directly from the determinant of the boundary condition system matrix. This results in an efficient inversion scheme that, in the case of noise-free data, yields exact results. Multimode data can be simultaneously processed without extra complications. Furthermore, the inversion scheme can accommodate an arbitrary number of unknown parameters, provided that the data have sufficient sensitivity to these parameters. As an important application, we consider the sonic guidance condition for a fluid-filled borehole in an elastic, homogeneous, and isotropic rock formation for numerical forward and inverse dispersion analysis. We investigate numerically the parametric inversion with errors in the model parameters and the influence of bandwidth and noise, and examine the cases of multifrequency and multimode data, using simulated flexural and Stoneley dispersion data.     

A recipe for making materials with negative refraction in acoustics

A recipe is given for making materials with negative refraction in acoustics, i.e., materials in which the group velocity is directed opposite to the phase velocity. The recipe consists of injecting many small particles into a bounded domain, filled with a material whose refraction coefficient is known. The number of small particles to be injected per unit volume around any point x is calculated as well as the boundary impedances of the embedded particles.     

Spin hall effect associated with SU(2) gauge field

In this paper, we focus on the connection between spin Hall effect and spin force. Here we investigate that the spin force due to spin-orbit coupling, which, in two-dimensional system, is equivalent to forces of Hirsch and Chudnovsky besides constant factors 3 and $\frac{3}{2}$ respectively, is a part of classic Anandan force, and that the spin Hall effect is an anomalous Hall effect. Furthermore, we develop the method of AC phase to derive the expression for the spin force, and note that the most basic spin Hall effect indeed originate from the AC phase and is therefore an intrinsic quantum mechanical property of spin. This method differs from approach of Berry phase in the study of anomalous Hall effect , which is the intrinsic property of the perfect crystal. On the other hand, we use an elegant skill to show that the Chudnovsky-Drude model is reasonable. Here we have improved the theoretical values of spin Hall conductivity of Chudnovsky. Compared to the theoretical values of spin Hall conductivity in the Chudnovsky-Drude model, ours are in better agreement with experimentation. Finally, we discuss the relation between spin Hall effect and fractional statistics.     

Spin-orbit coupling effect on quantum hall ferromagnets with vanishing zeeman energy

We present the phase diagram of a ferromagnetic nu = 2N+1 quantum Hall liquid in a narrow quantum well with vanishing single-particle Zeeman splitting, varepsilon(Z), and a pronounced spin-orbit coupling. Upon decreasing varepsilon(Z) the spin-polarization field of a liquid takes, first, the easy-axis configuration, followed by the formation of a helical state which affects the transport and NMR properties of a liquid and the form of topological defects in it.     

Design of an acoustic bending waveguide with acoustic metamaterials via transformation acoustics

Transformation acoustics is employed to design an acoustic bending waveguide. A two-dimensional square area with anisotropic and homogeneous material properties is transformed into a fan-shaped area with anisotropic and inhomogeneous material properties to rotate the direction of beam propagation. An alternating layered structure is considered to approximate a medium with anisotropic material properties. From the calculation results, the transformation medium can be realized by an alternating layered structure consisting of water and fluid with negative mass density. We propose that an acoustic metamaterial composed of three layers in water background can be designed to replace negative mass density fluid. The effective mass density and bulk modulus of the system that is composed of the acoustic metamaterial and water are dependent on the incident frequency and the geometric size of the acoustic metamaterial. We tune the geometric size of the acoustic metamaterial to approach the corresponding mass density distribution of the negative mass density fluid at a specific frequency. Thereby, the acoustic bending waveguide designed by using transformation acoustics can be achieved by the acoustic metamaterials.