Donorstärken in 1,2-Dichloräthan

Zusammenfassung Kalorimetrische und spektrophotometrische Untersuchungen über die Donorstärke einer Anzahl nicht-wäßriger Lösungsmittel zeigen, daß die relative Reihung der Donorstärken unabhängig von der Natur des Akzeptors ist. Die Donorreihung lautet gegenüber SbCl₅, Jod und Phenol folgendermaßen: Pyridin > Dimethylsulfoxid > Dimethylacetamid Dimethylformamid > > Trimethylphosphat Diphenylphosphoroxychlorid > Diäthyläther > Aceton > Propandiol-1,2-carbonat > Acetonitril > > Selenoxychlorid Phosphoroxychlorid Benzoylchlorid > > Thionylchlorid > Sulfurylchlorid.

---

Calorimetric and spectrophotometric work on the donor strength of various non-aqueous solvents have shown that the relative order of donor strength is independent from the nature of the acceptor. The order of donor strength towards SbCl₅, I₂ and phenole is pyridine > dimethylsulfoxide > dimethylacetamide dimethylformamide > trimethylphosphate diphenylphosphonic chloride > diethyl ether > acetone > propane diol-1,2-carbonate > acetonitrile > selenium oxychloride phosphorus oxychloride benzoyl chloride > thionyl chloride > sulfuryl chloride.

---

---

Mit 1 Abbildung     

Simple screening method for the fast determination of clenbuterol in animal feeds

Summary A simple method for the determination of clenbuterol is described. It is extracted from the sample at pH 3 and then at pH 11, followed by partitioning the analyte into water at pH 3 and reextraction into ethyl acetate at pH 9. Clenbuterol is oxidized with KMnO₄ to clenbuteron for GC-determination. Recoveries for 0.01– 1.0 mg/kg were between 70% and 110% (standard deviation ±14%, n = 18).

---

Eine einfache Screening-Methode zur schnellen Bestimmung von Clenbuterol in tierischen Futtermitteln

     

Homogeneous decomposition of gaseous methanol induced by CO2 laser

The laser heating procedure has been used to study chain reactions under strictly homogeneous conditions. The rate constants for the initiation and overall chain decomposition of methanol have been determined.

---

. - 1000–1100 °.

     

Structure Formation in Carbon Fibers in the Course of Flash High-Temperature Treatment

The size of coherent scattering regions formed in carbon fibers was studied as influenced by the preparation conditions of the initial polyacrylonitrile thread and conditions of preliminary (200°C) and flash high-temperature (2400 and 3200°C) thermomechanical treatments.     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

On the use of a dead-time meter for pile-up corrections

Correction for pile-up losses in the amplifier is possible by the dead-time fraction indicator of the ADC in case of long-lived radionuclides. If the dead-time meter has been calibrated, an accuracy of 1.5% is feasible up to a dead-time fraction of 25%. The precision decreases from 1.5% at 10% dead-time fraction to 3% at a deadtime fraction of 30%.     

Reversible Optical Sensor Membrane for Hydrogen Peroxide Using an Immobilized Fluorescent Probe,and its Application to a Glucose Biosensor

An optical sensor for hydrogen peroxide (HP) based on the probe europium tetracycline (EuTc) incorporated into a polyacrylonitrile-co-polyacrylamide polymer matrix is described. Upon optical excitation with 400-nm light, the EuTc in the membrane displays fairly strong fluorescence peaking at 616nm. The fluorescence intensity increases up to 3-fold if the sensor is exposed to solutions containing HP. The effect is reversible and can thus be used for continuous sensing. The largest signal changes with HP are observed at pH levels between 6.5 and 7.5, and the range of the response is between 10 and 300ppm (w/w) of HP, equal to 0.3 to 10mmolL^–1). At concentrations above 0.3% of HP, decomposition of the EuTc in the membrane is observed. The limit of detection is 15ppm (0.45mmolL^–1). The response is fully reversible and rather slow (10min) in both directions, but the reverse response may be accelerated by addition of a reducing agent such as thiosulfate. Alkali ions and most anions remain inert, but phosphate and citrate interfere, as do Cu²⁺ ions, which quench fluorescence. In order to image the spatial distribution of HP concentrations, sensor membranes were placed on the bottom of the wells of a microtiter plate, and their fluorescence was imaged using an LED-based device based on the measurement of the luminescence decay time of EuTc. If glucose oxidase is immobilized on the sensor layer, a glucose sensor is obtained in which the HP sensor acts as the transducer and which can quantify glucose in concentrations between 0.1 and 5mmolL^–1. The limit of detection for glucose is 0.2mmolL^–1.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Experimental investigation on tritium gettering with hydrogen uranyl phosphate (HUP)

At room-temperature and atmospheric pressure, using electrode disks of various sizes, under the action 4 7Vdc eletric field, we gettered tritium gas from 2.2L of air containing (0.15 18.61)×10⁸ Bq of tritium and (3000 12000) ppm of moisture during 50 hours or so the efficiency of gettering tritium was over 95%. Applying liquid scintillation counting method, we measured the tritium in the disks after gettering, and found that the amounts of tritium in the disks were equal to those reduced in the tested tritiated air.     

Enthalpy of Solution of Squalane in Alcohols

Enthalpy of solution at 25°C of squalane in butyl alcohols and 1-octanol is determined calorimetrically. The endothermic effect of dissolution increases in the order 1-OctOH < BuOH < i-BuOH < t-BuOH. A linear correlation is found between the enthalpies of solution of squalane and hexadecane, from which the enthalpy of solution of squalane in methanol is determined. The contributions of the cavity formation and solute-solvent interaction to the enthalpy of solution are estimated by multiple regression analysis. The enthalpy of cavity formation is only slightly dependent on the length of the main chain of an alcohol and also on the branching type, varying in the order 1-OctOH BuOH i-BuOH < MeOH s-BuOH < t-BuOH. Interaction of squalane with alcocols increases in the order MeOH < t-BuOH < BuOH < i-BuOH s-BuOH < 1-OctOH.     

Tail-end purification of americium from plutonium loading effluents using a mixture of octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide and tri-N-butyl phosphate

The tail-end purification of Am from Pu loading effluents in 7.5M HNO₃ containing 160 mg l^–1 Am and 1.2 mg l^–1 Pu has been carried out. With 0.2M CMPO+1.2M TBP in dodecane as the extractant and stripping by 0.04M HNO₃+0.05M NaNO₂, the Pu level is brought down to 31.2 g l^–1. When the acidity was reduced to 4.2M HNO₃, one contact with 20% TLA/dodecane and subsequent extraction by a mixture of CMPO and TBP and stripping with 0.04M HNO₃+0.05M NaNO₂ gave Am samples without any detectable amounts of Pu. The recovery of Am was 90% by the first procedure and 98% by the second one.     

ESR study of the interaction of tribenzyltitanium with diisobutylaluminium chloride

ESR studies of the interaction between⁴⁷Ti enriched tribenzyltitanium and diisobutylaluminium chloride suggest that the observed spectral peculiarities show the formation of the alkylhalide complex of Ti ₂ ⁷⁺ .

---

⁴⁷Ti, . Ti ₂ ⁷⁺ .

     

Polyhydroxysteroids from the Far-Eastern starfishCtenodiscus crispatus

Four new polyhydroxysteroids, 5-cholesta-3,5,6,15,16,25,26-heptaol, 24-ethyl-5-cholesta-3,5,6,15,28,29-heptaol-29-sulfate, (22E)-24-methyl-5-cholest-22-ene-3,5,6,15,25,26-hexaol-26-sulfate, 24-propyl-5-cholesta-3,5,6,8,15,28,29-heptaol, and the known 5-cholesta-3,5,6,15,16,26-hexaol, have been isolated from the starfishCtenodiscus crispatus.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1821–1825, October, 1994.     

Über einige Komplexboride von Übergangsmetallen

Zusammenfassung Dreistofflegierungen in dem Kombinationen {Mo, W}-{Fe, Co, Ni}-B; {V, Nb, Ta, Mo, W}-B-Al werden vornehmlich auf die Existenz von Komplexboriden hin untersucht. Die isotypen Phasen Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ und W₂NiB₂ sind strukturell mit Mo₂FeB₂ verwandt, aber doch von dieser Phase verschieden. Gefunden werden außerdem die isotypen Phasen MoCoB und WCoB. Das Problem der -Phase wird diskutiert. In manchen Fällen tritt ein Zwischenzustand auf, der vermutlich durch Stapelfehler einer Unterzelle (c/3 in hexagonaler Aufstellung) hervorgerufen wird. Neben dem Auftreten ternärer Phasen bei Nb-B-Al und Ta-B-Al wird eine ausgeprägte Mischphasenbildung: (Nb, Al)B₂ und (Ta, Al)B₂ beobachtet. Der Dreistoff: Mo-B-Al ist durch die ternäre Phase MoBAl gekennzeichmet, ferner tritt der durch Al stabilisierte CrB-Typ auf (Mo_0,45B_0,50Al_0,05). Die Gleichgewichtsverhältnisse in denT-B-Al-Dreistoffen werden abgeschätzt.

---

Alloys of the combinations {Mo, W}-{Fe, Co, Ni}-B, {V, Nb, Ta, Mo, W}-B-Al have been examined with respect to the existence of complex borides. The phases of the approximate formula Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ and W₂NiB₂ have been found to be isotypic. They do however not correspond to Mo₂FeB₂ having U₃Si₂ structure. Two other complex borides of formula MoCoB and WCoB have been detected having the same crystal structure. The problem of the -phases which partially contain boron will be discussed considering the supposedly occurring stacking faults of a subcell unit (c=c/3 for hexagonal symmetry). Besides formation of ternary compounds for: Nb-B-Al and Ta-B-Al an extended solid solution (Nb, Al)B₂ and (Ta, Al)B₂ has been observed. The Mo-B-Al-system is characterized by the ternary phase of formula MoBAl. Mo-monoboride having CrB-type has been found to be stabilized by a small amount of Al, thus Mo_0,45B_0,50Al_0,05 being formed. The phase equilibria within the ternary systems have been established for the major part.

---

---

Mit 4 Abbildungen     

High temperature catalytic synthesis of higher hydrocarbons from methane

It has been revealed that methane conversion to higher hydrocarbons over MgO catalyst involves the direct participation of heterogeneous catalyst at contact times of up to 3s and is a homogeneous reaction at 10s.

---

MgO. , 3 . , 10 . .

     

Influence of Cyclodextrins on the Kinetics of Oxidation of Amino Acids and BSA by Hydrazyl Radicals

The kinetics of oxidation of amino acids (Arg, His, Lys, Phe, Thr and Tyr), a dipeptide (Gly-His), and BSA (bovine serum albumin) by two persistent water soluble free radicals of the hydrazyl type has been studied.The rate decreases in the order Arg>Lys>Tyr>Thr>HisBSAPheGly-His with bothfree radicals. Addition to the reaction mixture of - and -cyclodextrin decreases the oxidation rate, probably due to amino acidencapsulation in the cyclodextrin cavity. -Cyclodextrin protects more efficiently against oxidation than -cyclodextrin.     

Kinetic dual standard additions method for the determination of two mutually interfering analytes: Molybdate and tungstate

A kinetic dual standard additions method for determination of two mutually interfering analytes is proposed. The deviations of absorbance from additivity in kinetic systems, caused by synergistic effects of catalysts, are compensated with the defined synergistic catalytic coefficient. The hydrogen peroxide-iodide kinetic reaction catalysed by molybdate and tungstate was studied with the stopped-flow injection technique and the conditions for simultaneous determination of Mo and W established. The molybdenum and tungsten contents in different samples were determined with recoveries of 97.6 102.1% and 96.9 98.6%, and relative standard deviations of 2.3 3.4% and 1.6 2.6%, respectively.     

Neue τ-Boride

The following -borides have been synthesized: Cr₁₃Ir₁₀B₆, Mn₁₆Ir₇B₆, Fe_10–15.4Ir_13–7.6B₆, Co₁₅Ir₈B₆.

---

---

Mit 1 Abbildung

---

Herrn Prof. Dr.A. Knappwost in Freundschaft gewidmet.     

On the interpretation of differences in mechanisms, kinetics and dynamics of oxidation reactions on metal and oxide catalysts

Langmuir-Hinshelwood type mechanisms with competitive adsorption are suggested to be more typical for metal catalysts, since, unlike on oxide systems, oxidizable substance and molecular oxygen can be adsorbed on the same (reduced) active sites. Therefore, multiple steady states and critical phenomena are more characteristic for catalysis on metals.

---

, - , , () . .

     

Catalytic activity of honeycomb catalysts, I. The benzene-cyclohexane (de)hydrogenation reaction

Monolithic supported platinum catalysts were investigated with respect to their hydrogenation and dehydrogenation activity towards benzene and cyclohexane, respectively, between 250° and 350°C. Conversion of benzene to cyclohexane is optimal for the volume ratio H₂/Bz=5 at lower temperatures. In the cyclohexane dehydrogenation reaction, high temperatures, associated with lower N₂/Cy ratios, are beneficial. No byproducts were observed in the two reactions.

---

, , 250 °C 350 °C. H₂/=5. N₂/ . .