Interaction of glycine with cationic, anionic, and nonionic surfactants at different temperatures: a volumetric, viscometric, refractive index, conductometric, and fluorescence probe study

A number of thermodynamic parameters viz. apparent molar volumes, ϕ _v , partial molar volumes, , transfer volumes, , Falkenhagen coefficients, A, Jones–Dole coefficients, B, free energies per mole of solute, , and per mole of solvent, , molar refraction, R _D , and limiting molar conductivity, , have been calculated by using the experimentally measured densities, ρ, viscosities, η, refractive indices, n _D , and specific conductivities, κ, data of glycine (0.02–0.10 m) in 0.01 m aqueous sodium dodecyl sulphate, cetyltrimethylammonium bromide, and triton X-100 (TX-100) solutions at 298.15, 303.15, 308.15, and 313.15 K. The above calculated parameters were found to be sensitive towards the interactions prevailing in the studied amino acid–surfactant–water systems. Moreover, fluorescence study using pyrene as a photophysical probe has also been carried out, the results of which support the conclusions obtained from other techniques.     

On the largest eigenvalues of trees with perfect matchings

Let λ₁ (G) and Δ (G), respectively, denote the largest eigenvalue and the maximum degree of a graph G. Let be the set of trees with perfect matchings on 2m vertices, and . Among the trees in , we characterize the tree which alone minimizes the largest eigenvalue, as well as the tree which alone maximizes the largest eigenvalue when . Furthermore, it is proved that, for two trees T ₁ and T ₂ in (m≥ 4), if and Δ (T ₁) > Δ (T ₂), then λ₁ (T ₁) > λ₁ (T ₂).     

Synthesis and characterization of poly(lactic acid) and glucosamine-formaldehyde/dodecylbenzenesulfonate composite films

The composite films of poly(lactic acid) (PLA) doped with glucosamine(Gluc)-formaldehyde(FA) polymer/sodium dodecylbenzenesulfonate (SDBS) complexes at 1–5 wt% were synthesized to demonstrate striking improvement of their structural and mechanical properties. The polymer complexes were obtained by the hydrothermal polymerization of Gluc and FA at a molar ratio of 1:2 in the presence of SDBS. The atomic ratios of S in to N in (=S/N) in the polymer complexes limitedly range from 0.52 to 0.69, indicating that the complexation develops through the nonstoichiometric reaction between groups of (Gluc-FA) polymer and ones of SDBS and 31–48% of the groups remain unbound. The PLA composite film doped with 1 wt% (Gluc-FA)/SDBS showed the elongation-at-break of as large as 194% compared with 37% for PLA film, together with an appreciable increase of the crystallites size (D ₂₀₀) of PLA from 21.8 to 33.3 nm.     

Interaction of a finite quantum system with an infinite quantum system that contains a single one-parameter eigenvalue band

Interaction of a finite quantum system that contains ρ eigenvalues and eigenstates with an infinite quantum system that contains a single one-parameter eigenvalue band is considered. A new approach for the treatment of the combined system is developed. This system contains embedded eigenstates with continuous eigenvalues , and, in addition, it may contain isolated eigenstates with discrete eigenvalues . Two ρ × ρ eigenvalue equations, a generic eigenvalue equation and a fractional shift eigenvalue equation are derived. It is shown that all properties of the system that interacts with the system can be expressed in terms of the solutions to those two equations. The suggested method produces correct results, however strong the interaction between quantum systems and . In the case of the weak interaction this method reproduces results that are usually obtained within the formalism of the perturbation expansion approach. However, if the interaction is strong one may encounter new phenomena with much more complex behavior. This is also the region where standard perturbation expansion fails. The method is illustrated with an example of a two-dimensional system that interacts with the infinite system that contains a single one-parameter eigenvalue band. It is shown that all relevant completeness relations are satisfied, however strong the interaction between those two systems. This provides a strong verification of the suggested method.     

Voltammetric analysis of hydroquinone, ascorbic acid, nitrobenzene and benzyl chloride in aqueous, non-aqueous, micellar and microemulsion media

Voltammetric behaviour of hydroquinone, ascorbic acid, nitrobenzene and benzyl chloride in aqueous, micellar, microemulsion and aprotic media on glassy carbon electrode under identical experimental conditions was compared. A general trend of decreasing peak currents in the order was noticed. The only exception was hydroquinone, which exhibited a slightly lower current in micellar medium. The peak potentials for each of these compounds varied in the order with due consideration for the two oxidation and reduction processes (negative E _P values for reduction). In micellar systems, which contain a predominantly aqueous phase where the cationic surfactant exhibits a catalytic effect, lower peak potentials and higher current are obtained. The peak potential and peak current is lower in microemulsion when compared to aprotic medium. The causes for such systematic variations and their analytical implications are discussed.     

Photoelectrode characteristics of an organic bilayer in water phase containing a redox molecule

We have recently reported that the organic bilayer of 3,4,9,10-perylenetetracarboxyl-bisbenzimidazole (PTCBI, n-type semiconductor) and 29H,31H-phthalocyanine (H₂Pc, p-type semiconductor), which is a part of a photovoltaic cell, acts as a photoanode in the water phase (Abe et al., ChemPhysChem 5:716, [2004]); in that case, the generation of the photocurrent involving an irreversible thiol oxidation at the H₂Pc/water interface took place to be coupled with hole conduction through the H₂Pc layer, based on the photophysical character of the bilayer. In the present work, the photoelectrode characteristics of the bilayer were investigated in the water phase containing a redox molecule , where the photo-induced oxidation and reduction for the couple were found to take place at the bilayer. The photoanodic current involving the oxidation efficiently occurred at the interface of H₂Pc/water, similar to the previous example. In the view of the voltammograms obtained, it was noted that there are pin-holes in the H₂Pc layer of the bilayer, leading to a cathodic reaction with at the PTCBI surface especially in the dark; that is, the band bending at the PTCBI/water interface can essentially be reduced by applying a negative potential [e.g., < ∼ 0 V (vs Ag/AgCl)] to the PTCBI, when the cathodic reaction may take place through the conduction band of the PTCBI. Moreover, under that applied potential condition of irradiation, the photogenerated electron carrier part can move to the PTCBI surface, thus enhancing the reduction of .     

Behavior of (La,Sr)CoO3- and La2NiO4-based ceramic anodes in alkaline media: compositional and microstructural factors

The behavior of dense ceramic anodes made of perovskite-type (x = 0.30–0.70; y = 0–0.05; z = 0–0.20) and K₂NiF₄-type (Me = Co, Cu; x = 0–0.20) indicates significant influence of metal hydroxide formation at the electrode surface on the oxygen evolution reaction (OER) kinetics in alkaline solutions. The overpotential of cobaltite electrodes was found to decrease with time, while cyclic voltammetry shows the appearance of redox peaks characteristic of Co(OH)₂/CoOOH. This is accompanied with increasing effective capacitance estimated from the impedance spectroscopy data, because of roughening of the ceramic surface. The steady-state polarization curves of in the OER range, including the Tafel slope, are very similar to those of model Co(OH)₂–La(OH)₃ composite films where the introduction of lanthanum hydroxide leads to decreasing electrochemical activity. La₂NiO₄-based anodes exhibit a low electrochemical performance and poor stability. The effects of oxygen nonstoichiometry of the perovskite-related phases are rather negligible at high overpotentials but become significant when the polarization decreases, a result of increasing role of oxygen intercalation processes. The maximum electrocatalytic activity to OER was observed for A-site-deficient , where the lanthanum content is relatively low and the Co⁴⁺ concentration determined by thermogravimetric analysis is highest compared to other cobaltites. Applying microporous layers made of template-synthesized nanocrystalline leads to an improved anode performance, although the effects of microstructure and thickness are modest, suggesting a narrow electrochemical reaction zone. Further enhancement of the OER kinetics can be achieved by electrodeposition of cobalt hydroxide- and nickel hydroxide-based films. Dedicated to Professor Dr. Yakov I. Tur’yan on the occasion of his 85th birthday.     

Kinetics and Equilibria for Complex Formation between Palladium(II) and Chloroacetate

Kinetics and equilibria for the formation of a 1:1 complex between palladium(II) and chloroacetate were studied by spectrophotometric measurements in 1.00 mol HClO₄ at 298.2 K. The equilibrium constant, K, of the reaction

Thermal analysis of PVA/CNTs 2D membrane

The power–time curves of micellar formation of two anionic surfactants, sodium laurate (SLA) and sodium dodecyl sulfate (SDS), in N,N-dimethyl acetamide (DMA) in the presence of various long-chain alcohols (1-heptanol, 1-octanol, 1-nonanol and 1-decanol) were measured by titration microcalorimetry at 298 K. The critical micelle concentrations (CMCs) of SLA and SDS under various conditions at 298 K were obtained based on the power–time curves. Thermodynamic parameters (, and ) for micellar systems at 298 K were evaluated according to the power–time curves and the mass action model. The influences of the number of carbon-atom and the concentration of alcohol were investigated. Moreover, combined the thermodynamic parameters at 303, 308 and 313 K in our previous work and those of 298 K in the present work for SLA and SDS in DMA in the presence of long-chain alcohols, an enthalpy–entropy compensation effect was observed. The values of the enthalpy of micellization calculated by direct and indirect methods were made a comparison.     

Improvement of the electrochemical properties of “as-grown” boron-doped polycrystalline diamond electrodes deposited on tungsten wires using ethanol

The electrochemical properties of boron-doped diamond (BDD) polycrystalline films grown on tungsten wire substrates using ethanol as a precursor are described. The results obtained show that the use of ethanol improves the electrochemistry properties of “as-grown” BDD, as it minimizes the graphitic phase upon the surface of BDD, during the growth process. The BDD electrodes were characterized by Raman spectroscopy, scanning electronic microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The boron-doping levels of the films were estimated to be ∼10²⁰ B/cm³. The electrochemical behavior was evaluated using the and redox couples and dopamine. Apparent heterogeneous electro-transfer rate constants were determined for these redox systems using the CV and EIS techniques. values in the range of 0.01–0.1 cm s⁻¹ were observed for the and redox couples, while in the special case of dopamine, a lower value of 10⁻⁵ cm s⁻¹ was found. The obtained results showed that the use of CH₃CH₂OH (ethanol) as a carbon source constitutes a promising alternative for manufacturing BDD electrodes for electroanalytical applications.     

Binuclear cobalt(II/II) and cobalt(II/III) chelates with O<Subscript>2</Subscript>N<Subscript>2</Subscript> ligands: synthesis,structure and magnetic studies

Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with H₂L¹ and H₂L², respectively, in acetonitrile solution. Here, [L¹]²⁻ and [L²]²⁻ are the deprotonated forms of N,N-bis(2-hydroxybenzyl)-N′,N′-dimethylethylenediamine and N,N-bis(2-hydroxybenzyl)-2-picolylamine, respectively. The crystal structures of and were determined by x-ray crystallography. In , each cobalt atom has distorted trigonal bipyramid geometry, while in , each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in . The magnetic characterization for is in agreement with the presence of Co(II) and Co(III) centers. Graphical Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with dianionic N₂O₂ coordinating ligands. In complex 1, each cobalt atom has distorted trigonal bipyramid geometry, while in complex 2, each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in complex 1. The magnetic characterization for complex 2 is in agreement with the presence of Co(II) and Co(III) centers. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sodium dioctylphosphinate emulsifier properties

The properties of a scarcely studied twin-tailed surfactant, sodium dioctylphosphinate (SDOP), as emulsifier were studied. The SDOP hidrophile–lipophile balance (HLB) value was measured and the Davies HLB group number of the sodium phosphinate group was computed. The surfactant promotes the formation of water in petroleum ether emulsions. The emulsion was characterized by the employment of several techniques such as centrifuge test and turbidimetry and density measurements. The maximum stability was obtained by the surfactant concentration of 0.3 mol dm⁻³ with 14 g of water emulsified in 12.41 g oil/g surfactant was emulsified. Conductivity information was used to study the temperature effect on the emulsion droplets and the energy of the droplet clustering during percolation. The enthalpy of adsorption at the oil/water interface was positive at all surfactant concentrations ([S]); its absolute value showed a maximum of [S]=0.1 mol dm⁻³ and subsequent decreased was attributed to a change in the droplet interface, which would provide the necessary energy for the adsorption of SDOP molecules. The determination of droplet clustering thermodynamic parameters during percolation showed that droplet clusters were formed spontaneously and the process driving force was a negative enthalpy contribution.     

On the special values of monic polynomials of hypergeometric type

Special values of monic polynomials y _n (s), with leading coefficients of unity, satisfying the equation of hypergeometric type

On minimal energies of trees of a prescribed diameter

The energy of a graph is defined as the sum of the absolute values of all the eigenvalues of the graph. Let denote the set of trees on n vertices and diameter d, . Yan and Ye [Appl. Math. Lett. 18 (2005) 1046–1052] have recently determined the unique tree in with minimal energy. In this article, the trees in with second-minimal energy are characterizedAMS Subject Classification: 05C50, 05C35     

Recent developments in Ruddlesden–Popper nickelate systems for solid oxide fuel cell cathodes

Motivated by recent work on the Ruddlesden–Popper material, which was shown to be a superior oxide-ion conductor than conventional solid-oxide fuel cell cathode perovskite materials, we undertook A- and B-site doping studies of the Ruddlesden–Popper nickelate series in an attempt to identify other candidates for cathode application. In this paper, we summarize our most significant results for the and systems and more recently, the higher-order Ruddlesden–Popper phases La _n+1Ni _n O_3n+1 (n=2 and 3), which show greater promise as cathode materials than the n=1 compositions.     

Mixed-Valence 24-Vanadophosphate Decorated with Six RuII(dmso)3 Groups: [{RuII3(dmso)9PVV11VIVRuIIIO37(OH)3}2]8?

The mixed-valence 24-vanadophosphate (1) has been synthesized and characterized in the solid state by IR, magnetism, EPR, XPS, and elemental analysis. Single-crystal X-ray analysis was carried out on (Na-1), which crystallizes in the triclinic system, space group , with a = 17.168(3) ?, b = 18.1971(14) ?, c = 20.1422(13) ?, α = 114.753(3)°, β = 99.390(4)°, γ = 95.124(4)°, and Z = 2. Polyanion 1 has an unusual, open structure composed of 2 Ru^IIIO₆ octahedra, 2 V^IVO₆ octahedra, 14 V^VO₅ square-pyramids, 8 V^VO₄ tetrahedra, and 2 PO₄ tetrahedra which are all directly linked via edges and corners. The outer surface of 1 is decorated with six Ru^II(dmso)₃ groups. XPS studies on Na-1 confirm the presence of 2 Ru^III and 6 Ru^II as well as 22 V^V and 2 V^IV centers. Magnetic susceptibility data on Na-1 show that the V^IV–Ru^III pairs are coupled antiferromagnetically, with J ₁ = −13 K and J ₂ ∼ −3 K. We did not detect any peak in our EPR measurements on Na-1, thus supporting the conclusion that Na-1 is diamagnetic in its ground state. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. In Memoriam Prof. F. A. Cotton     

Cluster Oxalate Complexes [W3(μ3-Q)(μ2-Q)3 (C2O4)3(H2O)3]2? (Q=S, Se): Mechanochemical Synthesis and Crystal Structure

Mechanochemical reaction of cluster coordination polymers (Q=S, Se) with solid leads to the cluster core excision with the formation of anionic complexes . Extraction of the reaction mixture with water followed by crystallization gives crystalline (main product) and (1) (minor product). In the case of the Se cluster, the complex could not be isolated, and the treatment of the aqueous extract with PPh₃ gave (2) in a low yield. Alternatively, it was obtained from and in high yield. Both 1 and 2 were characterized by X-ray structure analysis. Dedicated to Academician I. I. Moiseev on the occasion of his 75th birthday and in recognition of his outstanding contribution to cluster chemistry.     

Mathematical relations between codon bias indexes and their applications

Codon Adaptation Index (CAI), Effective Number of Codons as well as its modifications , can be used to measure gene codon bias. In this article, we prove is more efficient and unbiased than and by revisiting correlations of them with CAI in the level of individual amino acid’s codon bias. Correlations are studied by mathematical expressions rather than statistic methods, because the latter unavoidably depend on the data set used. Additionally, the immediate cause of correlations of with CAI (as well as those of RSCU with CAI) are also described in mathematical language. Perhaps, mathematics provides us a new way to study correlations between biological indexes.     

Removal of Nitrogen and Organic Matter in a Radial-Flow Aerobic-Anoxic Immobilized Biomass Reactor Used in the Posttreatment of Anaerobically Treated Effluent

This work reports on the removal of organic matter and nitrogen in a radial-flow aerobic-anoxic immobilized biomass (RAIB) reactor fed with domestic sewage pretreated in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor. Polyurethane foam was used as support material for biomass attachment in both reactors. In batch experiments, a first-order kinetic model with residual concentration represented the organic matter removal rate, whereas nitrogen conversion followed a pseudo-first-order reaction in series model, with kinetic constants k ₁ (ammonium to nitrite) and k ₂ (nitrite to nitrate) of 0.25 and 6.62 h⁻¹, respectively. The RAIB reactor was operated in continuous-flow mode and changes in the airflow rate and hydraulic retention time were found to interfere in the apparent kinetic constants to the nitritation (k ₁) and nitratation (k ₂). Nitrification and denitrification were achieved in the partially aerated RAIB reactor operating with hydraulic retention times of 3.3 h and 2.7 h in the aerobic and anoxic zones, respectively. Ethanol was added in the anoxic zone of the reactor to promote denitrification. The effluent flow of the RAIB reactor presented a COD of 52 mg l⁻¹, and concentrations of 2 mg , 1.24 mg and 3.46 mg .     

Effect of the mediator in feedback mode-based SECM interrogation of indium tin-oxide and boron-doped diamond electrodes

Indium tin-oxide (ITO) and polycrystalline boron-doped diamond (BDD) have been examined in detail using the scanning electrochemical microscopy technique in feedback mode. For the interrogation of electrodes made from these materials, the choice of mediator has been varied. Using ferrocene methanol (FcMeOH), and approach curve experiments have been performed, and for purposes of comparison, calculations of the apparent heterogeneous electron transfer rates (k _app) have been made using these data. In general, it would appear that values of k _app are affected mainly by the position of the mediator reversible potential relative to the relevant semiconductor band edge (associated with majority carriers). For both the ITO (n type) and BDD (p type) electrodes, charge transfer is impeded and values are very low when using FcMeOH and as mediators, and the use of results in the largest value of k _app. With ITO, the surface is chemically homogeneous and no variation is observed for any given mediator. Data is also presented where the potential of the ITO electrode is fixed using a ratio of the mediators and In stark contrast, the BDD electrode is quite the opposite and a range of k _app values are observed for all mediators depending on the position on the surface. Both electrode surfaces are very flat and very smooth, and hence, for BDD, variations in feedback current imply a variation in the electrochemical activity. A comparison of the feedback current where the substrate is biased and unbiased shows a surprising degree of proportionality.Dedicated to Alan, a good friend and colleague on his 60th birthday.