Label-free monitoring of site-specific DNA cleavage by EcoRI endonuclease using cyclic voltammetry and electrochemical impedance

Cyclic voltammetry (CV) combined with electrochemical impedance spectroscopy (EIS) were proposed to monitor the site-specific DNA cleavage by EcoRI endonuclease without using external label. The alteration of CV and EIS signal demonstrated that double-strands (dsDNA) contain recognition sequence was cleaved by EcoRI endonuclease. Real-time monitoring indicated that the dsDNA was cleaved by EcoRI more than 90% after 2 h of enzyme digestion time. Control experiment showed that the DNA cleavage by EcoRI endonuclease is site-specific for DNA sequence. Experimental results demonstrated that the efficiency of EcoRI cleavage was highly dependent on the concentration of EcoRI concentration in the range from 0.04 to 0.4 U μL⁻¹ with one almost linear relationship.     

Real-time monitoring of double-stranded DNA cleavage using molecular beacons

Traditional methods to assay enzymatic cleavage of DNA are discontinuous, time-consuming and laborious. Here, we report a new approach for real-time monitoring of double-stranded DNA cleavage by restriction endonuclease based on nucleic acid ligation using molecular beacon. Upon cleavage of DNA, the cleavage product can be ligated by DNA ligase, which results in a fluorescence enhancement of the molecular beacon. This method permits real-time monitoring of DNA cleavage and makes it easy to characterize the activity of restriction endonuclease and to study the cleavage reaction kinetics.     

Fluorescence study of DNA binding and bending by EcoRI DNA methyltransferase

We have applied fluorescence anisotropy and fluorescence resonance energy transfer (FRET) techniques to study the interaction between EcoRI DNA methyltransferase (M.EcoRI) and its target DNA in solution. Upon binding with M.EcoRI, the dsDNA containing GAATTC bends to flip out the second adenine for methylation. The binding affinity of M.EcoRI to two dsDNA fragments (20 and 38 bp) was studied with fluorescence anisotropy. Their binding constants at different temperatures from 20 to 40 degrees C were obtained, and the thermodynamic parameters of binding were derived. The results showed that M.EcoRI had a higher binding affinity to the short dsDNA strand than to the long one, and its binding to DNA was primarily entropy-driven. By labeling the 5' ends of the 20-bp dsDNA with two fluorescent dyes, fluorescein (FAM) and tetramethylrhodamine (TMR), we were able to monitor the enhanced TMR fluorescence in the presence of M.EcoRI. The end-to-end distance of the dsDNA determined from the FRET efficiency was changed from 72.4 to 63.4 A, and the DNA bending angle was estimated as 57.8 degrees .     

Facile and sensitive S1 endonuclease activity and inhibition assay using positively-charged Ag nanorods

A facile and promising fluorescence strategy for the detection of S1 endonuclease activity and inhibition was established for the first time based on positively Ag nanorods (AgNRs) and negatively-charged ROX-labeled sing-stranded DNA (ROX-ssDNA).     

Multiplex detection of endonucleases by using a multicolor gold nanobeacon

A highly sensitive and selective assay based on a novel enzyme‐responsive multicolor gold nanobeacon has been developed for the multiplex detection of endonucleases, a group of very important nucleases. The nanobeacon takes advantage of the high specificity of DNA cleavage reactions combined with the unique fluorescence‐quenching property of gold nanoparticles (AuNPs). To prepare the nanobeacon, three hairpin DNA reporters, each labeled at the 5′ terminus with a fluorescent dye (i.e., fluorescein amidite (FAM), carboxy‐X‐rhodamine (ROX), cyanine dye (Cy5)), that respond to one of three different endonucleases are co‐assembled at the surface of AuNPs (15 nm). This assembly brings the dyes into very close proximity with the AuNP, which leads to significant quenching of the fluorescence due to the nanosurface energy‐transfer (NSET) effect. When the nanobeacon is exposed to the targeted endonucleases, specific DNA cleavage occurs and pieces of DNA fragments are released from the AuNP surface along with the fluorescent dye, which results in the fluorescence recovery that provides the basis for a quantitative measurement of endonuclease activity. Three endonucleases, namely HaeIII, EcoRI, and EcoRV, were studied as the proof‐of‐concept analytes. These endonucleases in homogeneous mixture solutions were simultaneously quantified by the proposed assay with high sensitivity and specificity. The limits of detection obtained were in the range of 5.0×10^?4 U mL^?1 to 1.0×10^?3 U mL^?1 of endonuclease; these limits are at least 100 times more sensitive than the previously reported endonuclease assays. Endonuclease inhibitors impair the DNA cleavage, so it is anticipated that the present method has great potential for screening inhibitors of endonucleases. To demonstrate this application, the inhibitory effects of certain anticancer drugs on HaeIII, EcoRI, and EcoRV activities were studied. The present protocol proved to be sensitive, reliable, and easy to carry out.     

Ultrasensitive endonuclease activity and inhibition detection using gold nanoparticle-enhanced fluorescence polarization

We have developed a highly sensitive and selective fluorescence polarization assay method based on the specificity of the DNA cleavage reaction with the enhancement of gold nanoparticles (AuNPs) for assaying endonuclease activity and inhibition. This assay can detect EcoRI endonuclease down to 5.0×10(-4) U mL(-1) with a detection range from 5.0×10(-4) to 10 U mL(-1).     

A graphene-based real-time fluorescent assay of deoxyribonuclease I activity and inhibition

Using the remarkable difference in the affinity of graphene oxide (GO) with double strand DNA (dsDNA) and short DNA fragments, we report for the first time a GO-based nonrestriction nuclease responsive system. Our system was composed of GO and a fluorescent dye fluorescein amidite (FAM)-labeled dsDNA substrate (F-dsDNA). At first, the fluorescence of this F-dsDNA substrate was quenched upon addition of GO. When nuclease was added to the mixture of dsDNA and GO, hydrolysis of dsDNA was initiated and small DNA fragments were produced. As a result, the short FAM-linked DNA fragments were released from GO due to the weak affinity of GO with short DNA fragments, and the fluorescence got a restoration. At present, many sensing systems are based on the fact that GO prefers to bind long single strand DNA (ssDNA) over dsDNA or short ssDNA. As for our system, GO has a prior binding with dsDNA over short DNA fragments. Compared with previous methods, this assay platform has some advantages. First, since GO can be prepared in large quantities from graphite available at very low cost, this method shows advantages of simplicity and cost efficiency. Besides, the proposed GO-based nuclease assay provides high sensitivity due to the super quenching capacity of GO. Using deoxyribonuclease I (DNase I) as a model system, DNase I activity can be quantitatively analyzed by the velocity of the enzymatic reaction, and 1.75 U mL⁻¹ DNase I can be significantly detected. Moreover, the fluorescent intensity with various concentrations of nuclease becomes highly discriminating after 3–8 min. Thus, it is possible to detect nuclease activity within 3–8 min, which demonstrates another advantage of quick response of the present system. Finally, use of dsDNA as substrate, our method can achieve real-time nuclease activity/inhibition assay, which is time-saving and effortless.     

Monitoring of single nicks in duplex DNA by gel electrophoretic mobility-shift assay

We demonstrate that the gel electrophoretic mobility-shift assay (EMSA) can be used for site-selective and quantitative monitoring of nicks in linear double-stranded DNA (dsDNA) thus allowing to expediently follow the nicking activity of enzymes or other agents targeted to a designated dsDNA site. At elevated temperature and/or in the presence of urea, DNA fragments carrying a single nick produced by the nicking enzyme N.BstNBI exhibit a well-detectable gel retardation effect. On the basis of permutation analysis, the decreased electrophoretic mobility of nicked dsDNA fragments is attributed to a bend (or hinge) in the DNA double helix sequence-specifically generated by a nick. Since nick-induced DNA bending depends on interaction between base pairs adjacent to a nick, the change in mobility is different for nicked DNA sites with different sequences. Therefore, EMSA monitoring of differential mobility change caused by nicks within various DNA sequences could be useful for studying the differential base stacking and nearest-neighbor energetics.     

Enzyme-modulated cleavage of dsDNA for studying interfacial biomolecular interactions.

This work describes the chemistry and methodology for constructing multilayers of bis-biotinylated dsDNA on metal substrates after enzyme cleavage and demonstrates its use for amplified microgravimetric and impedimetric analyses of anticancer drug, cisplatin. Specific chemical modification of dsDNA prior to immobilization was achieved via a bisulfite-catalyzed transamination of cytosine after endonuclease cleavage of plasmid DNA. The specificity of the reaction of cytosine residues at ss- versus dsDNA loci after endonuclease cleavage was characterized using circular dichroism, mass spectrometry, and absorption spectrophotometry. The biotinylated dsDNA consisting of 2961 base pairs was then used as a ligand at avidin-modified gold electrodes. Ac impedance spectroscopy and quartz crystal microbalance measurements clearly showed that the response to cisplatin increased linearly with target concentrations. The impedance spectroscopy resulted in a detection limit of 1 nM and a surface density of 4.8 x 10(13) molecules/0.1 cm(2). The immobilization of dsDNA on surfaces is a significant improvement over existing approaches in that it enables the attachment of long pieces of unmodified double-stranded DNA via a simple biotinylation step. The immobilization technique provides a generic approach for dsDNA-based sensor development and for monitoring DNA-analyte interactions.     

Exploring both sequence detection and restriction endonuclease cleavage kinetics by recognition site via single-molecule microfluidic trapping

We demonstrate the feasibility of a single-molecule microfluidic approach to both sequence detection and obtaining kinetic information for restriction endonucleases on dsDNA. In this method, a microfluidic stagnation point flow is designed to trap, hold, and linearize double-stranded (ds) genomic DNA to which a restriction endonuclease has been pre-bound sequence-specifically. By introducing the cofactor magnesium, we determine the binding location of the enzyme by the cleavage process of dsDNA as in optical restriction mapping, however here the DNA need not be immobilized on a surface. We note that no special labeling of the enzyme is required, which makes it simpler than our previous scheme using stagnation point flows for sequence detection. Our accuracy in determining the location of the recognition site is comparable to or better than other single molecule techniques due to the fidelity with which we can control the linearization of the DNA molecules. In addition, since the cleavage process can be followed in real time, information about the cleavage kinetics, and subtle differences in binding and cleavage frequencies among the recognition sites, may also be obtained. Data for the five recognition sites for the type II restriction endonuclease EcoRI on λ-DNA are presented as a model system. While the roles of the varying fluid velocity and tension along the chain backbone on the measured kinetics remain to be determined, we believe this new method holds promise for a broad range of studies of DNA-protein interactions, including the kinetics of other DNA cleavage processes, the dissociation of a restriction enzyme from the cleaved substrate, and other macromolecular cleavage processes.     

Nuclease tolerant FRET probe based on DNA-quantum dot conjugation.

We have developed a fluorescence resonance energy transfer (FRET) probe based on the conjugation of a quantum dot (QD) with dye (YOYO-3) intercalated DNA. The FRET-inducing electrostatic coupling of DNA and the QD made structural changes to the QD-DNA conjugates, which significantly prevented an enzymatic reaction between the DNA and a conventional restriction endonuclease (EcoRI).     

水溶性碳纳米粒子的制备及其在DNA和单核苷酸多态性分析中的应用

利用电化学氧化的方法制备了水溶性好、粒径为7～12nm的碳纳米粒子,该碳纳米粒子通过π-π相互作用吸附荧光标记的单链DNA探针,并能有效地猝灭其荧光．当单链DNA探针与匹配的DNA目标分子杂交形成双链DNA时,猝灭的荧光被恢复,由此可以检测1-200nmol／L的DNA目标分子。此外,在碳纳米粒子存在时,由荧光标记的DNA探针和DNA目标分子形成的双链DNA的熔解温度可以简便地被测定,当双链DNA有错配碱基时,其熔解温度降低,由此可方便、快速地分析单核苷酸多态性．     

Sequence‐Dependent dsDNA‐Templated Formation of Fluorescent Copper Nanoparticles

There are only a few systematic rules about how to selectively control the formation of DNA‐templated metal nanoparticles (NPs) by varying sequence combinations of double‐stranded DNA (dsDNA), although many attempts have been made. Herein, we develop a facile method for sequence‐dependent formation of fluorescent CuNPs by using dsDNA as templates. Compared with random sequences, AT sequences are better templates for highly fluorescent CuNPs. Other specific sequences, for example, GC sequences, do not induce the formation of CuNPs. These results shed light on directed DNA metallization in a sequence‐specific manner. Significantly, both the fluorescence intensity and the fluorescence lifetime of CuNPs can be tuned by the length or the sequence of dsDNA. In order to demonstrate the promising practicality of our findings, a sensitive and label‐free fluorescence nuclease assay is proposed.     

Nucleic acid detection using carbon nanoparticles as a fluorescent sensing platform

In this communication, we demonstrate for the first time the proof of concept that carbon nanoparticles (CNPs) can be used as an effective fluorescent sensing platform for nucleic acid detection with selectivity down to single-base mismatch. The dye-labeled single-stranded DNA (ssDNA) probe is adsorbed onto the surface of the CNP via π-π interaction, quenching the dye. In the target assay, a double-stranded DNA (dsDNA) hybrid forms, recovering dye fluorescence.     

A facile graphene oxide-based DNA polymerase assay

The DNA polymerase assay is fundamental for related molecular biology investigations and drug screenings, however, the commonly used radioactive method is laborious and restricted. Herein, we report a novel, simple and cost-effective fluorometric DNA polymerase detection method by utilizing graphene oxide (GO) as a signal switch. In this strategy, in the absence of DNA polymerase, the fluorophore-labeled template ssDNA could be strongly adsorbed and almost entirely quenched by GO. However, as DNA polymerase exists, the polymerized dsDNA product might lead to a much lower quenching efficiency after addition of GO due to the much weaker interaction of dsDNA with GO than ssDNA, thus resulting in a much higher fluorescence signal detected. As proof of concept, the quantitative DNA polymerase activity assay was performed using the Klenow fragment exo(-) (KF(-)) as a model. It was confirmed that, after optimization of detection conditions, KF(-) activity could be sensitively detected through facile fluorescence measurements, with a detection limit of 0.05 U mL(-1) and a good linear correlation between 0.05-2.5 U mL(-1) (R(2) = 0.9928). In addition, this GO-based method was further inspected to evaluate the inhibitive behaviors of several drugs toward KF(-) activity, the result of which firmly demonstrated its potential application in polymerization-targeted drug screening.     

基于核酸切割酶与脱氧核酶的荧光循环放大系统检测铅(Ⅱ)

利用核酸切割酶(Nicking endonuclease)识别特定DNA双链并切割其中某条单链的性质,构建了基于8-17E脱氧核酶(8-17E DNAzyme)的pb2+荧光循环放大检测方法.pb2+可激活8-17E脱氧核酶水解RNA底物,产生并释放出的单链与分子信标探针( Molecular beacon,MB)杂交,导致其茎环结构被破坏,荧光信号恢复;同时形成含有核酸切割酶Nt.BbvCI识别位点的双链区域.在核酸切割酶Nt.BbvCI的作用下,分子信标探针被切割释放,游离出来的单链可与其它分子信标重新杂交,从而触发下一轮酶切,引起荧光检测信号的循环放大.本方法避免了8-17E脱氧核酶与底物链的修饰,最低可以检测出水溶液中1.0×10-10 mol/L Pb2+,并在2倍浓度的Zn2+,以及5倍浓度的其它干扰金属离子存在的情况下对pb2+显示出良好的选择性.本方法对环境水样中pb2+的标准加样回收率为96.1％～108.0％.     

Fluorescence quenching of graphene oxide combined with the site-specific cleavage of restriction endonuclease for deoxyribonucleic acid demethylase activity assay

We report on the development of a sensitive and selective deoxyribonucleic acid (DNA) demethylase (using MBD2 as an example) activity assay by coupling the fluorescence quenching of graphene oxide (GO) with the site-specific cleavage of HpaII endonuclease to improve the selectivity. This approach was developed by designing a single-stranded probe (P1) that carries a binding region to facilitate the interaction with GO, which induces fluorescence quenching of the labeled fluorophore (FAM, 6-carboxyfluorescein), and a sensing region, which contains a hemi-methylated site of 5′-CmCGG-3′, to specifically recognize the target (T1, a 32-mer DNA from the promoter region of p53 gene) and hybridize with it to form a P1/T1 duplex. After demethylation with MBD2, the duplex can be specifically cleaved using HpaII, which releases the labeled FAM from the GO surface and results in the recovery of fluorescence. However, this cleavage is blocked by the hemi-methylation of this site. Thus, the magnitude of the recovered fluorescence signal is related to the MBD2 activity, which establishes the basis of the DNA demethylase activity assay. This assay can determine as low as ∼(0.05 ± 0.01) ng mL⁻¹ (at a signal/noise of 3) of MBD2 with a linear range of 0.2–300 ng mL⁻¹ and recognize MBD2 from other possibly coexisting proteins and cancer cell extracts. The advantage of this assay is its ability to avoid false signals and no requirement of bisulfite conversion, PCR amplification, radioisotope labeling, or separation.     

Aptamer based turn-off fluorescent ATP assay using DNA concatamers

We describe a turn-off fluorescence-based strategy for the detection of ATP by making use of aptamer-triggered dsDNA concatamers. This sensitive and easily controlled method is based on consecutive hybridization induced by ATP aptamers and their sectional complementary DNAs to form dsDNA concatamers. The intercalator SYBR Green I (SGI) was employed as a fluorescent probe. In the absence of ATP, the probe produces a strong signal. However, on addition of ATP, the binding of aptamer and ATP cause the concatamers to collapse and to release SGI whose fluorescence then is quenched. The effect was exploited to design a selective ATP assay by relating the decrease in fluorescence to the ATP concentration. A lower detection limit of 6.1 μM and a linear response in the 0 to 5000 μM concentration range was accomplished. The strategy was applied to cellular ATP assays, and the results obtained by this strategy and by the gold standard method are in good agreement. The method is sensitive, simple and cost efficient, and hence is promising in terms of future applications to determine ATP in cellular and other systems.

A turn-off fluorescence-based strategy for the selective detection of ATP by using aptamer-triggered dsDNA concatamers.

     

PNA/dsDNA complexes: site specific binding and dsDNA biosensor applications

The ability of peptide nucleic acids (PNA) to form specific higher-order (i.e., three- and four-stranded) complexes with DNA makes it an ideal structural probe for designing strand-specific dsDNA biosensors. Higher-order complexes are formed between a dye-labeled charge-neutral PNA probe and complementary dsDNA. Addition of a light-harvesting cationic conjugated polymer (CCP) yields supramolecular structures held together by electrostatic forces that incorporate the CCP and the dye-labeled PNA/DNA complexes. Optimization of optical properties allows for excitation of the CCP and subsequent fluorescence resonance energy transfer (FRET) to the PNA-bound dye. In the case of noncomplementary dsDNA, complexation between the probe and target does not occur, and dye emission is weak. The binding between PNA and noncomplementary and complementary dsDNA was examined by several methods. Gel electrophoresis confirms specificity of binding and the formation of higher-order complexes. Nano-electrospray mass spectrometry gives insight into the stoichiometric composition, including PNA/DNA, PNA(2)/DNA, PNA/DNA(2), and PNA(2)/DNA(2) complexes. Finally, structural characteristics and binding-site specificity were examined using ion mobility mass spectrometry in conjunction with molecular dynamics. These results give possible conformations for each of the higher-order complexes formed and show exclusive binding of PNA to the complementary stretch of DNA for all PNA/DNA complexes. Overall, the capability and specificity of binding indicates that the CCP/PNA assay is a feasible detection method for dsDNA and eliminates the need for thermal denaturing steps typically required for DNA hybridization probe assays.     

A dsDNA-lighted fluorophore for monitoring protein-ligand interaction through binding-mediated DNA protection

Because of their important roles in cellular functions, life activities, drug screening, and disease treatment, the development of efficient methods for monitoring protein-ligand interaction is essential. In this study, inspired by our previous studies on DNA conformation-selective fluorescent indicators, we developed a new sensing platform for monitoring protein-ligand interaction and detecting protein activity based on binding-mediated DNA protection and the dsDNA-lighted fluorophore, ethyl-4-[3,6-bis(1-methyl-4-vinylpyridium iodine)-9 H-carbazol-9-yl)] butanoate(EBCB). The ligand was purposefully linked to the 3?-terminal of a hairpin DNA probe to selectively bind with the target protein and protect the DNA from cleavage by exonuclease III. By virtue of EBCB's outstanding capacity to discriminate DNA conformation, the protein-ligand interaction could be effectively monitored through a fluorescence change in EBCB. A high fluorescence signal was detected when the hairpin DNA was protected in the presence of the target protein, whereas a much lower signal was observed in the presence of nontarget proteins.Our results demonstrated that the proposed strategy had high potential, such as high selectivity and relatively high sensitivity, for monitoring protein-ligand interaction and detecting protein activity. We believe these results will pave the way for applying dsDNA-lighted fluorophore EBCB as an effective signal transducer for DNA conformation transformation-mediated biochemical sensing.