Mechanism of formation of (η-C5H5)2NbH3 from the reaction of (η-C5H5)2NbCl2 with hydridoaluminate reducing agents

The mechanism of the transformation of (η⁵-C₅H₅)₂NbCl₂ to (η⁵-C₅H₅)₂NbH₃ by hydridoaluminate reducing agents has been investigated. Results suggest disproportionation of a niobium(IV) hydrite, leading to the trihydride product and a niobium(III) hydridoaluminate, (η⁵-C₅H₅)₂NbH₂AlR₂, which in turn is converted to the trihydride on hydrolysis. (η⁵-C₅H₅)₂NbH₂AlH₂ has been isolated; deuterium labelling shows that hydrogens exchange between ring and metal-bridging positions in this molecule.     

Photochemical reactions of alkynyl iron (II) complexes with carbon disulfide. Insertion of CS2 into an iron-C(sp) bond

The novel alkynyldithiocarboxylate complexes [Fe(η⁵-C₅H₅)(S₂CCCR) (dppm-P)] (3a,b) and [Fe(η₅-C₅H₅)(S₂CCCR)(PPh₃)] (4a,b) were obtained through the insertion of CS₂ into the iron-akynyl bond in the complexes [Fe(η₅-C₅H₅)(CCR)(L)(L′] L, L′ = dppm R = Ph (1a), ^tBu(1b); L = (CO), L′ = (PPh₃) R = Ph (2a), ^tBu (2b). Variable-temperature ³¹P{¹H} NMR studies indicate the presence of two different isomers, [Fe(η⁵-C₅H₅)(η³-S,C,S′---S₂CCCR)(L)(L′)] and [Fe(η⁵-C₅H₅(η²-S,S′-S₂CCCR)(L)(L′)], which rapidly interconvert at room temperature. The synthesis of the precursor complex [Fe(η⁵-C₅H₅)(CC^tBu)(CO)(PPh₃)] is also described.     

Photochemical reactions of the isostructural 17- and 18-electron complexes (η-C5H5)M(Me)PPh3 (M=Co, Ni)

The photochemical reactions of the title complexes were studied in air-free benzene solution. In both cases photolysis leads to the production of complexes of the formula (η⁵-C₅H₅)M(PPh₃)₂. Both reactions are the result of the initial loss of a methyl radical from the excited state. The primary photoproduct, (η⁵-C₅H₅)MPPh₃ (M=CO, Ni), then scavenges neutral ligands from the solution to yield, in the case of PPh₃, (η⁵-C₅H₅)M(PPh₃)₂. In the absence of uncoordinated ligand in the reaction solution, the cobalt derivative reacts with the starting material to yield (η⁵-C₅H₅)Co(PPh₃)₂, a methyl radical and (η⁵-C₅H₅)Co(solvent)_n.     

New ferrocenyl heterometallic complexes of 2,7-diethynylfluoren-9-one

A new series of rigid-rod alkynylferrocenyl precursors with central fluoren-9-one bridge, 2-bromo-7-(2-ferrocenylethynyl)fluoren-9-one (1b), 2-trimethylsilylethynyl-7-(2-ferrocenylethynyl)fluoren-9-one (2) and 2-ethynyl-7-(2-ferrocenylethynyl)fluoren-9-one (3), have been prepared in moderate to good yields. The ferrocenylacetylene complex 3 can provide a direct access to novel heterometallic complexes, trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCPt(PEt₃)₂Ph] (4), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCPt(PBu₃)₂CCRCC(η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (5), [(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCAu(PPh₃)] (6) and [(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCHgMe] (7) (R=fluoren-9-one-2,7-diyl), following the CuI-catalyzed dehydrohalogenation reactions with the appropriate metal chloride compounds. All the new complexes have been characterized by FTIR, ¹H-NMR and UV–vis spectroscopies and fast atom bombardment mass spectrometry. The solid state molecular structures of 3, 5, 6 and 7 have been established by X-ray crystallography. The redox chemistry of these mixed-metal species has been investigated by cyclic voltammetry and oxidation of the ferrocenyl moiety is facilitated by the presence of the heavy metal centre and increased conjugation in the chain through the ethynyl and fluorenone linkage units.     

Synthese et etude des complexes [C5H4(CH2)3C5H4]Ti(C5H5)2 presentant un pont entre deux ligands cyclopentadienyles

The complex (di-η⁵-C₅H₄CH₂CH₂CH₂C₅H₄)Ti(η¹-C₅H₅)₂ (I) can be obtained unambiguously starting from the corresponding bridged titanocene dichloride. Attempts to synthesize the isomeric compounds (η⁵-C₅H₅)₂ Ti(di-η¹-C₅H₄-CH₂CH₂CH₂C₅H₄) (I′) by the action of a convenient bridged dianion on (C₅H₅)₂ TiCl₂ afford several compounds, one of them is the complex I. The possibility of interconversion of these complexes by a fluctional process is discussed.     

Reactivity of niobocene dihalogenides toward nitroso derivatives. EPR and IR characterization of the first niobium(IV) complexes containing an ArNO-N,O ligand

The reaction of [Nb(η⁵-C₅H₄R)₂X₂] [1: R = SiMe₃, X = Cl; 2: R = SiMe₃, X = Br; 3: R = H, X = Cl; 4: R =^t, X = Cl] with nitroso derivatives ArNO [a: Ar = Ph; b: Ar = o-CH₃-C₃H₄; c: Ar = p-(CH₃)₂NC₆H₄] yields paramagnetic complexes formulated as [Nb(η⁵-C₅H₄R)(η³-C₅H₄R)X₂(ArNO-N,O) 1a, 1b, 1c, 2a, 3a, 4a and 4c, which have been characterized by ESR and IR spectroscopy.     

Organometalloidal derivatives of the transition metals : XXX. Mass spectrometry of transition metal substituted disilanes

Mass spectral fragmentation of a series of transition metal substituted disilanes, LMSiMe₂SiMe₂ML, LM = (η⁵-C₅H₅)Fe(CO)₂- (Fp), (η⁵-C₅H₅)Fe(η⁵-C₅H₄)- (Fc), RFe(CO)₂(η⁵-C₅H₄), are reported. They exhibit significant distinctions depending on the nature of LM. Direct cleavage of the Si---Si bond occurs in the order Fc å Fp å RFe(CO)₂(η⁵-C₅H₄) owing to the capacity of the LM fragment to stabilize positive charge. For complexes containing a direct Fe---Si bond, i.e. Fp-SiMe₂SiMe₂ML, disilene complexed ions are observed, and those complexes containing both an Fp group and a (η⁵-C₅H₄-SiMe₂SiMe₂) group exhibit significant formation of (C₅H₄=Si=SiMe₂) complexed ions. Little disproportionation is observed for any of the complexes studied, in contrast to organodisilanes.     

Stabile Bis(η-alkin)MCl2-komplexe; Darstellung und reaktivität

The synthesis and reactivity of {(η⁵-C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂} MCl₂ (M = Fe: 3a; M = Co: 3b; M = Ni: 3c) is described. The complexes 3 are accessible by the reaction of (η⁵-C₅H₄SiMe₃) ₂Ti(CSiMe₃)₂ (1) with equimolar amounts of MCl₂ (2) (M = Fe, Co, Ni). 3a reacts with the organic chelat ligands 2,2′-dipyridyl (dipy) (4a) or 1,10-phenanthroline (phen) (4b) in THF at 25°C to afford in quantitative yields (η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂ (1) and [Fe(dipy)₂]Cl₂ (5a) or [Fe(phen)₂]Cl₂ (5b). 1/n[Cu^IHal]_n (6) or 1/n[Ag^IHal]_n (7) (Hal = Cl, Br) react with {(η⁵ -C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂}FeCl₂ (3a), by replacement of the FeCl₂ building block in 3a, to yield the compounds {(η⁵-C₅H₄SiMe₃)₂Ti(C CSiMe₃)₂}Cu^IHal (8) or {(η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂}Ag^IHal (9) (Hal = Cl, Br), respectively. In 8 and 9 each of the two Me₃SiCC-units is η²-coordinated to monomeric Cu^I Hal or Ag^IHal moieties. Compounds 8 and 9 can also be synthesized by the reaction of (η⁵-C₅H₄SiMe₃)₂ Ti(CSiMe₃)₂ (1) with 1/n[Cu^IHal]_n (6) or 1/n [Ag^IHal]_n (7) in excellent yields. All new compounds have been characterized by analytical and spectroscopic data (IR, ¹H-NMR, MS). The magnetic moments of compounds 3 were measured.     

First examples of η- and η --- η-coordination in triphosphorus analogues of ferrocene. Crystal structure of the iron sandwich complex [Fe(η-C5H5) (η-C2R2P3)W (CO)5] (R = Bu)

Syntheses of the novel sandwich compounds [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)] and [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)W(CO)₅], (R = Bu^t), are described. The mode of attachment of the [W(CO)₅] fragment in the latter compound has been determined by NMR and single crystal X-ray diffraction studies.     

Synthesis and X-ray crystal structures of [Ph2PMe2][(η-C5H4Bu)2Li] and [(η-C5H4Bu)2Yb(Cl)CH2P(Me)Ph2]

The interaction of [(η⁵-C₅H₄Bu^t)₂YbCl · LiCl] with one equivalent of Li[(CH₂) (CH₂)PPh₂] in tetrahydrofuran gave [Ph₂PMe₂][(η⁵-C₅H₄Bu^t)₂Li] (1) and [(η⁵-C₅H₄Bu^t)₂Yb(Cl)CH₂P(Me)Ph₂] (2) in 10% and 30% yields, respectively. 1 could also be prepared in 70% yield from the reaction of [Ph₂PMe₂][CF₃SO₃] with two equivalents of (C₅H₄Bu^t)Li. Both compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. The solid state structure of 1 reveals a sandwich structure for the [(η⁵-C₅H₄Bu^t)₂Li]⁻ anion.     

La-NMR-spektroskopie an allyllanthan(III)-komplexen

¹³⁹La-NMR chemical shifts were measured for several anionic complexes of formulae Li(C₄H₈O₂)_3/2 [La(ν³-C₃H₅)₄], [Li(C₄H₈O₂)₂][Cp′_nLa(ν³-C₃]H₅)_4−n] (Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 and Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) and Li[R_nLa(ν³-C₃H₄)₄−n] (R = N(SiMe₃)₂; n = 1, 2 and R = CCsIMe₃; n = 4), as well as for neutral compounds for formulae La(ν³-C₃H₅)₃L_n (L = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_nLa(ν³-C₃H₅)_3−n (Cp′= Cp(ν⁵-Cp₅H₅), Cp *(ν⁵-C₅Me₅); n = 1, 2) and La(ν³-C₃H₂)₂X(THF)₂ X = Cl, Br, I). Typical ranges of the ¹³⁹La-NMR chemical shifts were found for the different types of complex independent of number and kind of organyl groups directly bonded to lanthanum.

Zusammenfassung

¹³⁹La-NMR-Spektroskopie wurde an einer Reihe anionischer Allyllanthanat(III)-Komplexe der Zusammensetzung ]- [La)ν³-C₃H₅)₄, [Li(C₄H₈)₂][Cp′_nLa(ν³-C₃H₅)_4−n(Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 und Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) und Li[R_nLa(ν³-C₃H₅)_4−n (R = B(SiMe₃)₂; n = 1, 2 und R = CCSiMe₃; n = 4 sowie neutraler Allyllanthan(III)-Komplexe der Zusammensetzung La(ν³-C₃H₅)₃L_n (L_n = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_n, La(ν³-C₃H₅)_3−n (Cp′ = Cp(ν⁵-C₅H₅), Cp * (ν⁵- Cp₅Me₅); n = 1, 2) und La(ν³-Cp₃H₅)₂X(THF)₂ (X = Cl, Br, I) durchgefürt. In Abhängikeit von der Anzahl und der Art der am Lanthan gebundenen Gruppen wurden für die verschieden Komplextypen charakteristische Resonanzbereiche ermittelt.     

The stereochemistry at silicon of an iron to cyclopentadienyl ligand silyl group migration in (η-C5H5)Fe(CO)2SiR3

The silyl group migration observed upon treating (R)(+)-(η⁵-C₅H₅)Fe(CO)₂-SiMePh(1-Np) with n-BuLi occurs with retention of configuration at silicon. The anion resulting from the migration, (η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Li, is alkylated with MeI to give (R)-(−)-(η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Me (II). Compound II is independently prepared from (η⁵-C₅H₅)Fe(CO)₂Me. A concerted mechanism for the migration involving frontside nucleophilic attack at silicon is suggested.     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

π-Olefin-Iridium-Komplexe : XXI. Synthese und Kristallstrukturen heterobinuclearer Komplexe mit wannenförmiger, synfacial gebundener η: η-Benzolbrücke

CpIr(η⁴-C₆H₆) (2) has been obtained in high yield by a four-step synthesis. Thermal reaction of 2 with CpCO(C₂H₄)₂ and photochemical reaction of 2 with CpRh(C₂H₄)₂ or CpRh(C₂H₄)₂ give the compounds μ-(η³: η³-C₆H₆)CoIrCp₂ (3), μ-(η³: η³-C₆H₆)RhIrCp₂ (4), and μ-(η³: η³-C₆H₆)(RhCp)(IrCp) (5), respectively. The X-ray crystallography data of 3 and 4 reveal a boat-shaped conformation of the synfacially bridging benzene ligand with a rather long Co---Ir bond distance in 3 and a relatively short Rh---Ir bond length in 4 which are caused by almost constant folding angles of the benzene unit. The dynamic behaviour of the benzene bridge was investigated by NMR spectrometry.     

Highly stereoselective reduction of methyl ketone complexes of the chiral Lewis acid [(η-C5H5)Re(NO)(PPh3)] by K(s-C4H9)3BH; synthesis of optically active secondary alcohols and derivatives

Reaction of optically active ketone complexes (+)-(R)-[(η⁵-C₅H₅)Re(NO)-(PPh₃)(η¹-O=C(R)(CH₃)]⁺ BF₄⁻ (R = CH₂CH₃, CH(CH₃)₂m C(CH₃)₃, C₆H₅) with K(s-C₄H₉)₃BH gives alkoxide complexes (+)-(RS)-(η⁵-C₅H₅)Re(NO)(PPh₃)-(OCH(R)CH₃) (73–90%) in 80–98% de. The alkoxide ligand is then converted to Mosher esters (93–99%) of 79–98% de.     

Heteroallen-komplexe des molybdänocens

Reactions of the extremely labile molybdenocene olefin complexe Mo(η⁵-C₅H₅)₂[(Z)-C₆H₅CH=CHC₆H₅] with heteroallenes X=C=Y (X=C=Y = CS₂, (p-tolyl)NCN(p-tolyl), (C₆H₅)₂CCO) gives the corresponding heteroallene complexes of molybdenocene Mo(η⁵-C₅H₅)₂(X=C=Y) in high yields. Spectroscopic data clearly indicate a dihapto-coordination of the heteroallenes via the C=X bond (X = O, S, N).     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLIV. Synthesen von Hydrogensulfido- und Hydrogenselenido-Komplexen der Metalle Chrom, Molybdän und Wolfram

Hydrogenchalcogenido complexes of general composition (η⁵-C₅R₅)(CO)₃M(EH) (R = H, CH₃; M = Cr, Mo, W; E = S, Se) can be obtained by three different routes, sometimes in quite good yields. Thus, the sulfur and selenium derivatives can be synthesized by insertion of the respective elements into the metal-hydrogen bonds of the precursor compounds (η⁵-C₅R₅)(CO)₃MH. This species also reacts with potassium selenocyanate to yield the hydrogenselenido derivatives (η⁵-C₅R₅)(CO)₃M(SeH) which can also be obtained by treatment of the methyl complexes (η⁵-C₅R₅)(CO)₃M(CH₃ (M = Mo, W) with HBF₄ and Li[SeH]. The corresponding hydrogentellurido compounds are probably formed by these preparative methods but appear to be quickly converted into either the dinuclear tellurium bridge products (μ-Te)[(η⁵-C₅R₅)(CO)₃M]₂ (M = Mo) or into the hydrido complexes (η⁵-C₅R₅)(CO)₃MH (M= Mo, W) by release of elemental tellurium.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLVI. Organoeisen-Komplexe mit Selen-Brücken

The nucleophilicity of the bridging atom of the selenium complex (μ-Se)[(η⁵-C₅H₅)Fe(CO)₂]₂ (1) has been demonstrated by addition of the complex cation [(η⁵-C₅H₅)Fe(CO)₂]⁺: Reaction of 1 with the ionic complex [(η⁵-C₅H₅)Fe(CO)₂-(THF)][BF₄] cleanly yields the ionic trinuclear complex [(μ₃-Se)(η⁵-C₅H₅)-Fe(CO)₂₃][BF₄] (3). This addition reaction converts the bridging selenium atom from a bent FeSeFe structure into a flattened Fe₃Se pyramid (X-ray diffraction studies), without significant changes in the iron-selenium bond lengths (244.9(<1) pm and 242.7(1)/243.3(1)/244.8(1) pm, respectively). These bonds are considered to be single bonds in accord with the EAN rule.     

The lively chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes, analogues of surface reactions in heterogeneous catalysis

The chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes is reviewed. The complex [{(η⁵-C₅Me₅)RhCl₂}₂] (1a) reacted with MeLi to give, after oxidative work-up, blood-red cis-[{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂], 2. This has the two rhodiums in the +4 oxidation state (d⁵), and linked by a metal-metal bond (2.620 Å). Trans-2 was formed on isomerisation of cis-2 in the presence of Lewis acids, or by direct reaction of 1a with Al₂Me₆, followed by dehydrogenation with acetone. The Rh-methyls in [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂] were readily replaced under acidic conditions (HX) to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(X)₂] (X = Cl, Br or I); these latter complexes reacted with a variety of RMgX to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)₂] (R = alkyl, Ph, vinyl, etc.). Trans-2 also reacted with HBF₄ in the presence of L to give first [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)(L)]⁺ and then [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(L)₂]²⁺ (L = MeCN, CO, etc.). The {(η⁵-C₅Me₅)Rh(μ-CH₂)}₂ core is rather kinetically inert and also forms a variety of complexes with oxy-ligands, both cis-, e.g. [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(μ-OAc)]⁺ and trans-, such as [(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(H₂O)₂]²⁺. The complexes [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)L]⁺ (R = Me or aryl) in the presence of CO, or [{(η⁵-C₄Me₅)Rh(μ-CH₂)}₂(R)₂] (R = Me, Ph or CO₂Me) in the presence of mild oxidants, readily yield the C---C---C coupled products RCH=CH₂. The mechanisms of these couplings have been elucidated by detailed labelling studies: they are more complex than expected, but allow direct analogies to be drawn to C---C couplints that occur during Fischer-Tropsch reactions on rhodium surfaces.