聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

表面印迹交替层状组装薄膜

在简要概述非常规交替层状组装这一进展后,重点总结了如何利用非常规交替层状组装以实现表面印迹膜的制备.模板分子与聚电解质在溶液中组装形成超分子复合物,然后以此超分子复合物为构筑基元,与感光性高分子,如重氮树脂,通过常规交替层状组装形成聚合物多层膜.利用聚合物多层膜之间的光化学反应形成稳定的多层膜,然后去除模板分子得到分子...     

Layer-by-layer assembly of two temperature-responsive homopolymers at neutral pH and the temperature-dependent solubility of the multilayer film

We fabricated a layer-by-layer (LbL) film of temperature-responsive homopolymers at neutral pH and studied its temperature-dependent solubility. We first measured the cloud point of mixed solutions of temperature-responsive polymers. The significant decrease of cloud point suggested that the intermolecular interaction between two polymer chains of different kinds was stronger than that between two polymer chains of the same kind. Strong intermolecular interaction between two polymer chains of different kinds is a prerequisite for LbL assembly. On the basis of the decrease of cloud point of mixed solutions of temperature-responsive homopolymers, we selected poly(N-vinylcaprolactam) (PVCL) and poly(2-hydroxypropyl acrylate) (PHPA) for LbL assembly. LbL films of the two polymers were fabricated at neutral pH at a constant temperature. When the film was immersed in purified water at a temperature lower than the assembly temperature, it can be partially dissolved with a diffusion-limited dissolution process. The temperature-responsive solubility of the LbL film is closely connected to the phase behavior of mixed solutions of the two polymers. Additionally, as compared to multilayer films of neutral polymers and poly(carboxylic acid)s, the PVCL/PHPA multilayer film is relatively stable when it was immersed in buffer solutions near physiological pH at the assembly temperature. Such LbL films with temperature-responsive solubility might be used as a dissolvable film or a smart capsule.     

聚合物复合物层层组装膜

层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.聚合物复合物是基于各种分子间弱相互作用力而形成的超分子聚集体,其种类包括聚阳离子-聚阴离子复合物、聚电解质-有机小分子复合物、中性聚合物-聚合物复合物以及聚合物-无机杂化复合物等.在本文中,以作者的研究结果为基础,阐明聚合物复合物的层层组装是一种方便、快捷的功能复合膜的构筑方法,具有如下优点:(1)聚合物复合物大的尺度可以实现聚合物复合物层层组装膜的快速构筑;(2)聚合物复合物的结构在组装溶液中和成膜后都容易调控,方便聚合物复合物层层组装膜结构的精细调控.(3)聚合物复合物层层组装膜可以构筑非复合的聚合物层层组装所不能获得的膜结构及功能.     

Bifunctional electroactive nanostructured membranes

The advent of techniques based upon the spontaneous assembly of different materials with control over molecular architecture has afforded the fabrication of composite thin films for many nanotechnological applications. The layer-by-layer technique (LbL), in particular, has largely been used in the molecular level processing of nanohybrid systems in the form of multilayers, owing to its low cost and experimental simplicity. In this study we describe the fabrication of a novel, bifunctional film containing platinum nanoparticles/polyamidoamine (PAMAM) dendrimers. Pt nanoparticles were chemically synthesized/stabilized in the presence of PAMAM dendrimers and incorporated in LbL films in conjunction with nickel tetrasulfonated phthalocyanine (NiTsPc). A metallophthalocyanine was chosen because of its well-defined redox activity. Indium tin oxide (ITO)-covered glass plates were used as substrates for film deposition. The nanocomposites displayed high electrocatalytic activity toward dopamine and hydrogen peroxide molecules, two compounds with dissimilar chemical properties.     

Drying and nondrying layer-by-layer assembly for the fabrication of sodium silicate/TiO2 nanoparticle composite films

Influences of drying and nondrying steps on structures of layer-by-layer (LbL) assembled sodium silicate/TiO(2) nanoparticles films (donated as silicate/TiO(2) films) have been systematically investigated. The nondrying LbL assembly produces highly porous silicate/TiO(2) films with large thickness. In contrast, the silicate/TiO(2) films fabricated with a drying step after each layer deposition are flat and thin without porous structures. In situ atomic force microscopy (AFM) measurements confirm that the sodium silicate and TiO(2) nanoparticles are deposited in their aggregated forms. A N(2) drying step can disintegrate the aggregated silicate and TiO(2) nanoparticles to produce thin silicate/TiO(2) films with compact structures. Without the drying steps, the aggregated silicate and TiO(2) nanoparticles are well retained, and their LbL assembly produces highly porous silicate/TiO(2) films of large thickness. The highly porous silicate/TiO(2) films are demonstrated to be useful as reusable film adsorbents for dye removal from wastewater because they can adsorb a large amount of cationic organic dyes and decompose them under UV irradiation. The present study is meaningful for exploring drying/nondrying steps for tailoring structure and functions of LbL assembled films.     

流动场对膜层层组装过程的影响

分别在层层组装膜的沉积和淋洗步骤中引入流动场, 用紫外-可见光谱对多层膜的组装过程进行了跟踪, 用原子力显微镜对膜的表面粗糙度进行了观察, 用X射线反射(XRR)对膜的厚度和粗糙度进行了评估. 实验结果表明, 在沉积步骤中, 流动场可以促进高分子与组装基底的接触, 从而提升组装速度; 而在淋洗步骤中, 搅拌下的流动场不仅可以冲洗掉膜表面物理吸附的高分子, 还能够降低膜的粗糙度, 使得膜表面更加平整.     

Polypeptide multilayer films: role of molecular structure and charge

The role of molecular structure, charge, and hydrophobicity in polyelectrolyte layer-by-layer assembly (LbL) of thin films has been studied using the model polypeptides poly-L-glutamatic acid (PLGA) and poly-L-lysine (PLL), quartz crystal microbalance (QCM), and circular dichroism spectroscopy (CD). The adsorption behavior of PLGA and PLL has been compared with the structure of these molecules in aqueous solution under the same conditions. The data show that the deposition of polypeptide per adsorption step scales with average secondary structure content, whether alpha helix or beta sheet. This is contrary to the expectation based on the view that hydrogen bonds are crucial to polypeptide film assembly, because secondary structure formation in a polypeptide reduces its intermolecular hydrogen-bonding potential. The data also show that polypeptide adsorption scales with ionic strength and chain length. Taken together, the results increase knowledge of polypeptide-based LbL thin film fabrication and will help to provide a firmer foundation for the use of natural or designed polypeptides in LbL.     

Impedance change induced by varying polymerization temperature of conducting polymer thin films

In this study, we use a conducting polymer precursor to build layer-by-layer (LbL) films. Thermal conversion of the polymer precursor to conducting polymer makes the LbL films intractable, so the LbL films can be used as protective layers in salt solution. The conducting polymer LbL film shows stabilizing effect on top of another LbL thin film that contains nanoparticles. The LbL film prepared in this study shows a 35-fold increase of conductivity than the literature values obtained from non-conducting polymer films. The stabilization of the films is the result of the polymerization of the conducting polymer, so other anionic polymers or nanoparticles may be used to afford additional functionalities.     

Layer-by-layer assembly: from conventional to unconventional methods

Layer-by-layer (LbL) assembly is a powerful means for fabricating multilayer thin films with controlled architecture and composition. This feature article discusses different types of methods for LbL assembly. On the one hand, some of the conventional LbL methods are introduced, which are driven by electrostatic interactions, hydrogen bonds, step-by-step reactions, sol-gel processes, molecular recognition, charge-transfer, stepwise stereocomplex assembly, and electrochemistry. On the other hand, some of the unconventional methods for fabricating of the building blocks which can not be assembled by conventional methods are also summarized. These unconventional methods usually involve the formation of supramolecular structures via one type of self-assembly. These structures can subsequently be used as building blocks in another type of self-assembly. To take advantage of these conventional and unconventional methods, a great number of building blocks can be fabricated into multilayer thin films with a defined sequence structure in a designed way. It has been demonstrated that LbL methods provide new horizons for surface molecular engineering.     

Layer-by-layer assembled gold nanoparticle films on amine-terminated substrates

This work reports the fabrication and characterization of multilayered gold nanoparticle (AuNP) thin films on aminosilane functionalized substrates. The films are fabricated via layer-by-layer (LbL) assembly using as-synthesized, un-modified AuNPs and poly(allylamine hydrochloride) as the building blocks. While most literature reports that AuNP based LbL assemblies are constructed with a single interlayer binding force, this work shows that both coordination and electrostatic interaction are involved in the process of assembly based on X-ray photoelectron spectroscopic results. The stepwise film growth behavior is demonstrated by atomic force spectroscopy and UV-vis spectroscopy. It is found that the particles agglomerate with each other and form large clusters when the number of assembled layers increases.     

智能响应与自修复的层层组装聚合物膜

具有刺激响应性和自修复功能的复合膜是重要的仿生功能膜材料.层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.通过结构与组成的精确调控,基于层层组装制备的微米厚度的聚电解质厚膜可以对外界刺激产生快速有效的响应,因而在制备智能仿生膜材料方面具有重要的价值.本文以作者的研究结果为基础,阐明了基于层层组装的聚电解质膜可以成功用于制备湿度和温度响应的双结构自支持膜和高效的促动器及行走机器,以及自修复超疏水和划痕修复聚电解质膜.     

Fabrication of novel multilayered thin films based on inclusion complex formation between amylose derivatives and guest polymers

Novel types of layer-by-layer (LbL) assembly films were successfully fabricated onto a solid substrate through the inclusion complex formation between partially 2,3- O-methylated amyloses (MAs) and polytetrahydrofuran (PTHF). The formation of the LbL assembly films was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy (AFM) observation, and X-ray diffraction (XRD) measurement. The film formation was significantly affected by the methylation degree of amylose. When MAs with 8 and 20% methylation were used as hosts, the formation of LbL assembly films with PTHF was clearly observed. On the other hand, MAs with more than 33% methylation barely formed LbL assembly films with PTHF.     

Layer-by-layer assembly for rapid fabrication of thick polymeric films

In the past two decades, layer-by-layer (LbL) assembly has been proven to be a convenient and versatile method to fabricate functional films. However, using traditional dipping LbL assembly to fabricate micrometer-thick films is time consuming. Compared with ultrathin films, micrometer-thick films prepared by LbL assembly possess enhanced mechanical stability, and allow deposition of a significantly increased amount of materials and the integration of multiple functions. These merits of thick films produced by LbL assembly can result in new functions and allow the functions of ultrathin films fabricated by LbL assembly to be optimized. In this tutorial review, the methods for rapid fabrication of thick polymeric films involving LbL assembly are reviewed. The functions of such films that are relevant to their micrometer thickness are discussed.     

Engineered hydrogen-bonded polymer multilayers: from assembly to biomedical applications

Over the last two decades the layer-by-layer (LbL) assembly technique has become a highly versatile platform for the synthesis of nanoengineered thin films and particles. The widespread need for highly functional and responsive materials for applications in biomedicine-such as drug and gene delivery-has recently led to considerable efforts in the assembly of LbL materials, particularly films that can be subsequently stabilised and functionalised through a range of chemistries. In this tutorial review, recent developments in hydrogen-bonded LbL-assembled materials will be discussed, focusing on the design of materials with enhanced stimuli-responsive characteristics. Emphasis will be given to materials engineered for biomedical applications, specifically films/capsules that afford controlled loading and release of therapeutic cargo for application in vitro and in vivo.     

Layer-by-layer assembly of partially sulfonated isotactic polystyrene with poly(vinylamine)

The stereoregular synthetic polymer isotactic polystyrene bearing partially sulfonated groups (SiPS) was used as a layer-by-layer assembled thin film for the first time. When a low molecular weight compound was employed as the pair for the alternative layer-by-layer (LbL) assembly, the frequency shift was very small using quartz crystal microbalance (QCM) analysis, whereas poly(vinylamine) (PVAm) formed an effective pair for the construction of LbL films with SiPS. When it was neutralized, SiPS was not assembled, probably due to the loss of effective polymer-polymer interactions. The ionic strength conditions revealed a slight difference of the assembly behavior on the isotactic polymer as compared to the atactic one. The assembled LbL film showed the same peaks over the range from 1141 to 1227 cm(-1) and 700 cm(-1) in the FT-IR/ATR spectra as the bulk complex of SiPS/PVAm, and the thickness on one side was calculated at 76 nm by QCM analysis. The surface roughness of the film was also observed by AFM.     

层层组装构筑聚电解质/碳纳米管导电黏附膜

首先将聚烯丙基胺盐酸盐与碳纳米管制成复合物(PAH-CNT), 再通过层层组装技术构筑了聚丙烯酸和碳纳米管混合物(PAA-CNT)与PAH-CNT多层复合膜(PAH-CNT/PAA-CNT). PAH-CNT/PAA-CNT多层复合膜同时具有导电和黏附性能. 在玻璃和ITO基片上沉积的PAH-CNT/PAA-CNT多层复合膜的最大拉伸剪切强度接近7 MPa, 即1 cm²的黏附膜可以承受约70 kg的重物. 碳纳米管的引入使PAH-CNT/PAA-CNT多层复合膜具有更好的导电性.     

Next generation, sequentially assembled ultrathin films: beyond electrostatics

Over the last 15 years, the layer-by-layer (LbL) assembly technology has proven to be a versatile method for surface modification. This approach is likely to find widespread application because of its simplicity and versatility; however, the conventional use of highly charged materials with limited responsive behaviour presents some key limitations. In this tutorial review, the formation of multilayer thin films prepared through non-electrostatic interactions is reviewed. We discuss the assembly of films via a number of different methodologies, with particular emphasis on those that provide enhanced orientational control, stimuli-responsive behaviour, and improved film stability.     

Robust multilayer thin films containing cationic thiol-functionalized gold nanorods for tunable plasmonic properties

Gold nanorods have great potential in a variety of applications because of their unique physical properties. In this article, we present the layer-by-layer (LbL) assembly of thin films containing positively charged gold nanorods that are covalently functionalized by cationic thiol molecules. The cationic gold nanorods are uniformly distributed in ultrathin nanocomposite LbL thin films. We studied the collective surface plasmon resonance coupling in the LbL films via UV-visible spectroscopy and evaluated their application in the surface-enhanced Raman scattering detection of rhodamine 6G probe molecules. Furthermore, we successfully manufactured freestanding nanoscale thin films containing multilayers of gold nanorods with a total thickness of less than 50 nm. The surface morphology and their optical and mechanical properties were systematically investigated, and the polycationic gold nanorods were found to play an important role in manipulating the properties of the nanocomposite thin films. Our findings reveal that such nanorods are excellent building blocks for constructing functional LbL films with tunable plasmonic behavior and robust mechanical properties.