Novel PU‐type polymeric photoinitiator comprising side‐chain benzophenone and coinitiator amine for photopolymerization of PU acrylate

A novel diamine 3,5‐diamino‐4′‐phenoxylbenzophenone (DAPBP) was synthesized from the reaction of 3,5‐diamino‐4′‐chlorobenzophenone (DACBP) and phenol. Then through the polycondensation of DAPBP, toluene‐2,4‐diisocyanate (TDI), and N‐methyldiethanolamine (MDEA), we obtained a PU‐type polymeric photoinitiator containing side‐chain benzophenone (BP) and tertiary amine in the same macromolecule (PUSOA). Another polymeric photoinitiator without coinitiator amine in polymer chain (PUSO) was also synthesized for comparison. FT‐IR, ¹H NMR, and GPC analyses confirmed the structures of monomer and polymeric photoinitiators. The UV–Vis spectra of PUSOA, PUSO, and DAPBP are similar, and all exhibit the maximal absorption near 290 nm. ESR spectra indicate that PUSOA can generate active species most efficiently. The photopolymerization of PU acrylate, initiated by PUSOA, PUSO/MDEA, DAPBP/MDEA, and BP/MDEA, was studied by differential scanning photocalorimetry (photo‐DSC). The results show that the in‐chain coinitiator amine can significantly improve the photoefficiency of the polymeric photoinitiator and the PUSOA is more efficient for the polymerization of PU acrylate than its low‐molecular‐weight counterpart. Copyright © 2008 John Wiley & Sons, Ltd.     

An efficient nonisocyanate route to polyurethanes via thiol‐ene self‐addition

A novel and efficient strategy for the synthesis of nonisocyanate polyurethanes has been developed via thiol–ene self‐photopolymerization. An aliphatic thiol–ene carbamate monomer (allyl(2‐mercaptoethyl)carbamate, AMC) was synthesized by a one‐step synthesis procedure, from cysteamine and allyl chloroformate. The urethane group was therefore incorporated directly into the monomer precursor, avoiding the problems associated to toxic isocyanates. AMC was successfully stabilized with the radical inhibitor pyrogallol (1% wt). In addition, the use of phenyl phosphonic acid as coadditive allowed its stabilization for lower concentrations of pyrogallol (0.1% wt). AMC was directly transformed into thermoplastic polyurethane (TPU) through thiol–ene photopolymerization by UV‐irradiation at 365 nm. The obtained TPU presented semi‐crystalline nature and very high thermal stability (T_5% ～325 °C). It was found that high concentrations of pyrogallol decreased the reaction rate and final conversion of photopolymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3017–3025     

Synthesis of main chain polymeric benzophenone photoinitiator via thiol‐ene click chemistry and Its use in free radical polymerization

Main chain polymeric benzophenone photoinitiator (PBP) was synthesized by using “Thiol‐ene Click Chemistry” and characterized with ¹H NMR, FTIR, UV, and phosphorescence spectroscopies. PBP as a polymeric photoinitiator presented excellent absorption properties (ε₂₉₄ = 28,300 mol^?1L^?1cm^?1) compared to the molecular initiator BP (ε₂₅₂ = 16,600 mol^?1L^?1cm^?1). The triplet energy of PBP was obtained from the phosphorescence measurement in 2‐methyl tetrahydrofurane at 77 K as 298.3 kJ/mol and according to phosphorescence lifetime, the lowest triplet state of PBP has an n‐π* nature. Triplet–triplet absorption spectrum of PBP at 550 nm following laser excitation (355 nm) were recorded and triplet lifetime of PBP was found as 250 ns. The photoinitiation efficiency of PBP was determined for the polymerization of Hexanedioldiacrylate (HDDA) with PBP and BP in the presence of a coinitiator namely, N‐methyldiethanolamine (MDEA) by Photo‐DSC. The initiation efficiency of PBP for polymerization of HDDA is much higher than for the formulation consisting of BP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

One‐component photoinitiator based on benzophenone and sesamol

A new benzodioxole derivative, 4‐(1,3‐benzodioxol‐5‐yloxy) benzophenone (BPBDO), based on benzophenone and sesamol was precisely synthesized, and it can be used as a 1‐component type II photoinitiator. Elementary analysis, atmospheric pressure chemical ionization mass spectrometry, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance studies revealed that the molecular structure of BPBDO consisted of both benzophenone (BP) and benzodioxole (BDO) structures. The laser flash photolysis experiments and electron spin resonance test indicated that the process of radicals generated from BPBDO after irradiation was similar to 3 processes of ethyl 4‐dimethylaminobenzoate and BP. The kinetics of photopolymerization of the photoinitiator was also studied by real‐time infrared spectroscopy. The oxygen content, light intensity, and viscosity of the monomer affected the decomposition (R_d) and polymerization rate, and the final double bond conversion was also studied. All the results suggest that BPBDO is a 1‐component photoinitiator that is an efficient photoinitiator for free radical polymerization. In contrast to typical dual‐component photoinitiators, eg, BP/ethyl 4‐dimethylaminobenzoate or BP/BDO, BPBDO does not require an additional amine coinitiator for the initiation and is applicable in nonamine resin systems.     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Photoinitiating behavior of benzophenone derivatives covalently bonded tertiary amine group for UV‐curing acrylate systems

A series of benzophenone derivatives (N‐BPs) containing tertiary amine group used as hydrogen abstraction‐type (type II) photoinitiators were synthesized through the addition reaction of secondary amines with 4‐(2,3‐epoxypropyloxy) benzophenone. The chemical structures were characterized with ¹H NMR, FTIR spectroscopy, and UV spectrum measurements. The N‐BPs showed the higher absorption in 300–400 nm than benzophenone (BP). The photoinitiating activity was examined based on the photopolymerization of 1,6‐hexanediol diacrylate using photo‐DSC method. The results showed that the photoinitiating efficiency was negatively affected by the molecular structure of alkyl group connected to the tertiary amine with the order of isopropyl (N‐BPI) < methyl (N‐BPM) < ethyl (N‐BPE) < propyl (N‐BPP). Moreover, the diethanolamine‐modified benzophenone derivative (N‐BPOH) had the highest‐photoinitiating efficiency for free radical polymerization systems among the N‐BPs. Copyright © 2011 John Wiley & Sons, Ltd.     

Radical polymerization activity and mechanistic approach in a new three‐component photoinitiating system

A new three‐component photoinitiating system (based on isopropylthioxanthone ITX, amine AH, and a bifunctional benzophenone–ketosulfone BP‐SK photoinitiator) for acrylate polymerization reactions was investigated through steady‐state photolysis (photodegradation, redox potentials, and acidity release determinations) and time‐resolved laser spectroscopy. The photopolymerization activity has been checked. It is shown that addition of ITX to BP‐SK/AH clearly enhances the efficiency of the photopolymerization of clear or pigmented coatings. This is explained (although, a direct interaction between the triplet state of ITX and BP‐SK occurs to some extents) on the basis of the interaction of BP‐SK with the ketyl radical of ITX. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4531–4541, 2000     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a novel,fluoride‐releasing dimethacrylate monomer and its dental composite

A novel, fluoride‐releasing dimethacrylate monomer containing zirconium fluoride chelate for use in dental composites was synthesized by an efficient four‐step procedure starting from 4,4‐bis‐(4‐hydroxyphenyl)‐pentanoic acid and was characterized by electrospray mass spectrometry, Fourier transform infrared (FTIR), and ¹H and ¹³C NMR spectroscopies. The synthesized monomer was photopolymerized with camphorquinone and 1‐phenyl‐1,2‐propane‐dione as initiators and N,N‐dimethylaminoethyl methacrylate as an accelerator. The photopolymerization process was investigated by FTIR spectroscopy. The experimental composite containing 13.7 wt % of the synthesized monomer was tested for fluoride release, fluoride recharge, compressive strength, and flexure strength, each in comparison to three commercial flowable dental composites. The results showed that the experimental composite had significantly higher fluoride release and fluoride recharge capabilities than the commercial flowable composites. The flexure strength was comparable to the commercial materials. The water sorption and solubility met the requirements of the International Organization for Standardization 4049 and the American National Standards Institute/American Dental Association Specification Number 27. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 985–998, 2004     

Efficient photoinduced In situ preparation of clay/poly(glycidyl methacrylate) nanocomposites using hydrogen‐donor silane

Clay/poly(glycidyl methacrylate) nanocomposites (clay/PGMA) were prepared by in situ radical photopolymerization using N,N‐dimethylaminopropyltrimethoxysilane(DMA)‐modified bentonite clay acting as hydrogen donor for benzophenone in solution. This initiating system permits to photopolymerize glycidyl methacrylate between the lamellae of the DMA‐modified clay. The approach provides exfoliated nanocomposites as judged by the measurements of X‐ray diffraction. However, a low fraction of persistent intercalated clay regions was visible by transmission electron microscopy. X‐ray photoelectron spectra analyses indicate that the nanocomposites have PGMA‐rich surface. The clay/PGMA nanocomposites can be readily dispersed in ethanol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 800–808     

Effect of Polymerizable Photoinitiators on the UV‐polymerization behaviors of photosensitive polysiloxane

In this contribution, three polymerizable benzophenone photoinitiators containing maleimide group including 4‐maleimidebenzophenone (MBP), 4‐chlorine‐4′‐maleimide benzophenone (CMBP), and 4‐maleimide‐4′‐[(4‐maleimide)thiophenyl]benzophenone (MMTBP) were designed and synthesized to enhance the polymerization degree of photosensitive polysiloxane containing methacryloxy active groups (MAPSO). The polymerization behaviors of the MAPSO cured by different photoinitiators were investigated using Fourier transform infrared (FTIR). It was noted that the MAPSO initiated by MMTBP showed a high carbon–carbon double bond conversion above 80% because of the existence of thiophenyl group which could generate more radicals from the photolysis reaction at the C? S bond. In addition, the thermal stability of the UV‐cured MAPSO were studied by thermogravimetric analysis (TGA), the result showed that the initial 5% mass loss (T _5%) and residual weight percent at 800 °C in nitrogen of the UV‐cured MAPSO initiated by MMTBP systems was 200 °C and 33.8%. Thus, this work provides a new perspective and efficient strategy to improve the polymerization degree of UV‐curable polysiloxanes with carbon–carbon double bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1696–1705     

Photoinitiated polymerization of acrylate,methacrylate, and vinyl ether end‐functional polyisobutylene macromonomers

Polyisobutylene‐based UV cured networks potentially useful as sealants were synthesized by photopolymerization of well‐defined polyisobutylene methacrylate (PIB‐MA), acrylate (PIB‐A) and vinyl ether (PIB‐VE) di‐ and trifunctional macromonomers. The kinetics of photocrosslinking were measured using an optical pyrometer apparatus and optimized with respect to different experimental parameters. PIB‐MA/A macromonomers displayed enhanced reactivity in radical photopolymerization in the presence of a bis(acylphosphine) oxide photoinitator. PIB‐VE macromonomers exhibited a high rates of photopolymerization with (4‐n‐octyloxyphenyl)phenyliodonium hexafluroantimonate as the photoinitiator. The rates as well as the ultimate monomer conversions were increased by increasing the irradiation light intensity. The inherent induction period associated with oxygen inhibition in the photopolymerization of PIB‐MA was significantly reduced by optimizing the choice of photoinitiator. A detailed investigation of the concentration of MA/A/VE end groups revealed the presence of a prominent saturation effect in the photopolymerization of PIB‐A, which was absent with PIB‐MA and PIB‐VE. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The preparation of amphiphilic core‐shell nanospheres by using water‐soluble macrophotoinitiator

The amphiphilic poly(AM‐co‐SA)‐ITXH macrophotoinitiator was synthesized by precipitation photopolymerization under UV irradiation with isopropylthioxanthone (ITX) as free radical photoinitiator. A novel method has been developed to prepare amphiphilic core‐shell polymer nanospheres via photopolymerization of methyl methacrylate (MMA) in aqueous media, with amphiphilic copolymer macrophotoinitiator poly(AM‐co‐SA)‐ITXH. During polymerization, the amphiphilic macroradicals underwent in situ self‐assembly to form polymeric micelles, which promoted the emulsion polymerization of the monomer. Thus, amphiphilic core‐shell nanospheres ranging from 70 to 140 nm in diameter were produced in the absence of surfactant. The conversion of the monomer, number average molecular weights (M_n), and particle size were found to be highly dependent on the macrophotoinitiator and monomer concentration. The macrophotoinitiator and amphiphilic particles were characterized by FTIR, UV‐vis, ¹H NMR, TEM, DSC, and contact angle measurements. The results showed the particles had well‐defined amphiphilic core‐shell structure. This new method is scientifically and technologically significant because it provides a commercially viable route to a wide variety of novel amphiphilic core‐shell nanospheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 936–942, 2010     

Highly efficient,polymerizable, sulfur‐containing photoinitiator comprising a structure of planar N‐phenylmaleimide and benzophenone for photopolymerization

In a continuation of research on chemically bonded photoinitiators comprising a structure of planar N‐phenylmaleimide (NPMI) and benzophenone (BP), a novel, highly efficient, polymerizable, sulfur‐containing photoinitiator, 4‐[(4‐maleimido)thiophenyl]benzophenone (MTPBP), was synthesized by the introduction of an NPMI group into BP. Another chemically bonded photoinitiator, 4‐[(4‐maleimido)phenoxy]benzophenone (MPBP), was selected to evaluate its photoefficiency. The results showed that MTPBP possessed a greatly redshifted UV maximal absorption and a very weak fluorescence emission. Electron spin resonance spectra indicated that the C? S bond in its molecule underwent photolysis reactions to generate radicals to initiate the polymerization. Three representative types of different functionality monomers—methyl methacrylate, 1,6‐hexanediol diacrylate, and trimethylolpropane triacrylate—were chosen to be initiated through dilatometry and differential scanning photocalorimetry with unsaturated tertiary amine N,N‐dimethylaminoethyl methacrylate as the coinitiator. The results showed surprisingly high efficiency of MTPBP due to the mutual influence between NPMI and BP as in their physical mixtures and photolysis reactions at the C? S bond. Both MPBP and MTPBP behaved with similar regularity toward different monomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3738–3750, 2006     

UV‐curable thio‐ether‐urethane network with tunable properties

A photoinitiating system composed of a sensitizer (isopropylthioxanthone, ITX) and a photobase generator (triazabicyclodecene tetraphenylborate TBD.HBPh4) was successfully applied to the photopolymerization of a thiol‐isocyanate‐epoxy mixture. The final polymer network was considered in term of the compositional ratio between the thiol‐isocyanate and thiol‐epoxy coupling reactions. In parallel with structural investigation by spectroscopic technics, the relationships between the compositional ratio and kinetics of photopolymerization, thermomechanical properties and hardness were investigated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3119–3126     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

Bis‐substituted thiophene‐containing oxime sulfonates photoacid generators for cationic polymerization under UV–visible LED irradiation

Three novel types of thiophene‐containing oxime sulfonates with a big π‐conjugated system were reported as non‐ionic photoacid generators. The irradiation of the newly synthesized photoacid generators using near UV–visible light‐emitting diodes (LEDs) (365–475 nm) results in the cleavage of two weak N O bonds in single molecules, which lead to the generation of different sulfonic acids in good quantum and chemical yields. The mechanism for the N O bond cleavage for acid generation was supported by the UV–visible spectra and real‐time ¹H NMR spectra. They are developed as high‐performance photoinitiators without any additives for the cationic polymerization of epoxide and vinyl ether upon exposure to near‐UV and visible LEDs (365–475 nm) at low concentration. In the field of photopolymerization, especially visible light polymerization, it has great potential for application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 776–782     

Polyesters containing sulfur. VIII. New benzophenone‐derivative thiopolyesterdiols synthesis and characterization. Their use for thermoplastic polyurethanes preparation

The new linear thiopolyesterdiols (PEs) containing sulfur in the main chain were synthesized by melt polycondensation of newly obtained benzophenone‐4,4′‐bis(methylthioacetic acid) with excess of 1,4‐butanediol, 1,5‐pentanediol, and 1,6‐hexanediol. All these PEs (M _n of 2000–2600) were converted to thiopoly(ester‐urethane)s (PEUs) by polyaddition reaction with hexamethylene diisocyanate or 4,4′‐diphenylmethane diisocyanate, which was carried out in melt at the ratio of NCO/OH = 1. The resulting thermoplastic PEUs were amorphous and elastomeric, with elongation at break ranging from 630 to 1200%. The polymers were characterized by Fourier transform infrared, ¹H NMR, thermogravimetric analysis, differential scanning calorimetry, and in the case of PEUs, Shore A/D hardness and tensile properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3977–3983, 2000     

Novel,highly efficient polymeric benzophenone photoinitiator containing coinitiator moieties for photopolymerization

A novel polymeric photoinitiator P(MPBP‐co‐DMAEMA), bearing side‐chain benzophenone (BP) and coinitiator amine, was synthesized through free radical copolymerization of a polymerizable photoinitiator, 4‐[(4‐maleimido)phenoxy]benzophenone (MPBP), and a polymerizable coinitiator amine, N, N‐dimethylaminoethyl methacrylate (DMAEMA). In order to find out the influences of coinitiator amine on photopolymerization, a polymeric coinitiator amine, P(DMAEMA), was also synthesized for comparison. FT‐IR, ¹H NMR, and GPC analyses confirm the structures of polymers. The UV‐Vis spectra of polymeric photoinitiator P(MPBP‐co‐DMAEMA) and polymerizable photoinitiator MPBP are similar, and both exhibit high red‐shifted maximal absorption as compared with BP. The photopolymerization of 1,6‐hexanediol diacrylate (HDDA) and trimethylolpropane triacrylate (TMPTA), initiated by MPBP/DMAEMA, MPBP/P(DMAEMA), and P(MPBP‐co‐DMAEMA) systems, was studied by photo‐DSC. The results indicate that P(MPBP‐co‐DMAEMA) is most efficient for the polymerization of both HDDA and TMPTA, and MPBP/P(DMAEMA) is the least efficient of the three photoinitiating systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Polymerizable benzophenone derivatives for labeling vinyl acetate‐butylacrylate latex particles

We describe the synthesis and characterization of three new polymerizable benzophenone derivatives [2‐acryloxy‐5‐methyl benzophenone ( 8 ), 4′‐dimethylamino‐2‐acryloxy‐5‐methyl benzophenone ( 9 ), and 4′‐dimethylamino‐2‐(β‐acryloxyethyl)oxy‐5‐methyl benzophenone ( 10 )]. We show that these monomers can successfully be incorporated into vinyl acetate (VAc) copolymer latex particles. These particles were prepared by semicontinuous emulsion polymerization and mini‐emulsion polymerization of VAc with butylacrylate (BA) for VAc/BA = 4/1 by weight. The two monomers 9 and 10 bearing the 4′‐dimethylamino group satisfy the important spectroscopic criteria required of a dye to serve as an acceptor chromophore for nonradiative energy transfer from phenanthrene (Phe) as the donor. Their UV absorption spectra suggest significant overlap with the emission spectrum of Phe, which can be incorporated into P(VAc‐co‐BA) latex through copolymerization with 9‐acryloxymethyl Phe ( 2 ). In addition, these chromophores provide a window in their absorption spectra for excitation of the Phe chromophore at 300 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3001–3011, 2002