Fluorinated and ring‐substituted bisbenzimidazole copper complexes for ethylene/acrylate copolymerization

Bisbenzimidazole copper dichloride complexes (CuBBIMs), when activated with methylaluminoxane, catalyze the random copolymerization of ethylene with acrylates to produce highly linear functional copolymers. To probe the sensitivity of the copolymerization to the catalyst structure, a series of CuBBIM catalysts with various steric, electronic, and geometric ligand characteristics was prepared, including CuBBIMs having benzimidazole ring substituents and ligand backbones of various lengths. Four different acrylates were also evaluated as comonomers (t‐butyl acrylate, methyl acrylate, t‐butyl methacrylate, and methyl methacrylate). Although no obvious ligand‐based influences on copolymerization were identified, the structure of the acrylate comonomer was found to exert significant effects. Copolymers prepared with t‐butyl methacrylate comonomer exhibited the highest ethylene contents (31–63%), whereas those prepared with methyl acrylate contained only minor amounts of ethylene (<15%). Copolymerizations carried out at lowered acrylate feed levels generally had increased ethylene contents but showed smaller yields, lowered molecular weights, and increased branching. Unusual ketoester structures were also observed in the methyl acrylate and methyl methacrylate containing copolymers, suggesting that the acrylate ester group size may be an important controlling factor for copolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1817–1840, 2006     

Preparation of gradient copolymers via ATRP using a simultaneous reverse and normal initiation process. I. Spontaneous gradient

Spontaneous gradient copolymers were prepared in both bulk and miniemulsion systems via Atom Transfer Radical Polymerization (ATRP) utilizing a Simultaneous Reverse and Normal Initiation (SR & NI) process. Both instantaneous and cumulative compositions were used to characterize the gradient copolymers. The gradient copolymers were obtained with an array of gradient compositions ranging from a subtle to strong variation in monomer distribution along the polymer backbones, depending on the ratio of comonomers initially added to the copolymerization system. The compositions of the gradient copolymer produced in miniemulsion systems were similar to those generated in bulk. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3616–3622, 2005     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

An efficient way to tune grafting density of well‐defined copolymers via an unusual Br‐containing acrylate monomer

A series of well‐defined amphiphilic graft copolymers, containing hydrophilic poly(acrylic acid) backbone and hydrophobic poly(butyl acrylate) side chains, were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and atom transfer radical polymerization (ATRP) without any postpolymerization functionality modification followed by selective acidic hydrolysis of poly(tert‐butyl acrylate) backbone. tert‐Butyl 2‐((2‐bromopropanoyloxy)methyl)‐acrylate was first homopolymerized or copolymerized with tert‐butyl acrylate by RAFT in a controlled way to give ATRP‐initiation‐group‐containing homopolymers and copolymers with narrow molecular weight distributions (M_w/M_n < 1.20) and their reactivity ratios were determined by Fineman‐Ross and Kelen‐Tudos methods, respectively. The density of ATRP initiation group can be regulated by the feed ratio of the comonomers. Next, ATRP of butyl acrylate was directly initiated by these macroinitiators to synthesize well‐defined poly(tert‐butyl acrylate)‐g‐poly(butyl acrylate) graft copolymers with controlled grafting densities via the grafting‐from strategy. PtBA‐based backbone was selectively hydrolyzed in acidic environment without affecting PBA side chains to provide poly(acrylic acid)‐g‐poly(butyl acrylate) amphiphilic graft copolymers. Fluorescence probe technique was used to determine the critical micelle concentrations in aqueous media and micellar morphologies are found to be spheres visualized by TEM. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2622–2630, 2010     

Model‐based design and synthesis of gradient MMA/tBMA copolymers by computer‐programmed semibatch atom transfer radical copolymerization

Methyl methacrylate (MMA)/tert‐butyl methacrylate (tBMA) gradient copolymers having linear and hyperbolic composition profiles were synthesized. These special copolymer products were achieved via a model‐based computer‐controlled semibatch atom transfer radical copolymerization (ATRcoP) process. A simple ATRcoP model was developed based on the terminal model. The equilibrium constants in the ATRP of MMA and tBMA were estimated by the data correlation. The model was verified by batch experiments and was found to give good correlation for the polymerization rate, molecular weight, and copolymer composition data. The model coupled with a reactor model was then applied to the semibatch ATRcoP and was used to calculate comonomer feeding rates for the targeted gradient composition profiles. It was found that the experimental monomer conversion, molecular weight, and cumulative copolymer composition were in good agreement with their targeted theoretical values. The gradient copolymers had low polydispersities close to 1.1. This work demonstrated the feasibility of the model‐based semibatch ATRcoP in fine‐tuning gradient copolymer composition profiles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 69–79, 2009     

Ethylene/hindered phenol substituted norbornene copolymers: Synthesis and NMR structural determination

A new family of ethylene‐based copolymers with controlled amounts of a norbornene comonomer (N_ArOH) bearing a stabilizing antioxidant functionality (2,6‐di‐tert‐butyl phenol) was prepared. Due to unavoidable exo/endo equilibrium operative in N_ArOH comonomer, a complete and detailed NMR assignment of the structure of the prepared ethylene/N_ArOH copolymers was carried out for the determination of the exo/endo ratio inside the polymer. These novel functionalized comonomers can be considered suitable starting material for preparing ethylene‐based copolymers, with tunable comonomer content, as non‐releasing macromolecular antioxidant additives for specific application in safe food and/or drug packaging © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Convenient synthesis of thermo‐responsive PtBA‐g‐PPEGMEMA well‐defined amphiphilic graft copolymer without polymeric functional group transformation

A series of well‐defined amphiphilic graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly[poly(ethylene glycol) methyl ether methacrylate)] (PPEGMEMA) side chains were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single‐electron‐transfer living radical polymerization (SET‐LRP) without any polymeric functional group transformation. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromoisobutanoyloxy)methyl)acrylate (tBBIBMA), was first prepared, which can be homopolymerized by RAFT to give a well‐defined PtBBIBMA homopolymer with a narrow molecular weight distribution (M_w/M_n = 1.15). This homopolymer with pendant Br initiation group in every repeating unit initiated SET‐LRP of PEGMEMA at 45 °C using CuBr/dHbpy as catalytic system to afford well‐defined PtBBIBMA‐g‐PPEGMEMA graft copolymers via the grafting‐from strategy. The self‐assembly behavior of the obtained graft copolymers in aqueous media was investigated by fluorescence spectroscopy and TEM. These copolymers were found to be stimuli‐responsive to both temperature and ions. Finally, poly(acrylic acid)‐g‐PPEGMEMA double hydrophilic graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PPEGMEMA side chains kept inert. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Glass transition temperature of allyl methacrylate‐n‐butyl acrylate gradient copolymers in dependence on chemical composition and molecular weight

Glass transition temperatures (T_gs) of P(AMA‐co‐BA) copolymers and the corresponding homopolymers, where AMA is allyl methacrylate and BA is n‐butyl acrylate, obtained by means of atom transfer radical polymerization were measured using differential scanning calorimetry. Because of the (pseudoliving) nature of this polymerization technique an increase in molecular weight (MW) is produced as the reaction progresses, which gives rise to an increase in T_gs. This increment can be adequately described by the Fox–Flory's equation in both homopolymers. However, in the spontaneous gradient copolymers of P(AMA‐co‐BA), the expected increase in T_g with the augment of the monomer conversion is compensated by the enrichment of BA as the polymerization reaction progresses. These opposite effects with respect to the T_g values almost balance each other, and therefore no significant influence on the MW or on conversion is found. This fact establishes that T_gs can be used to describe the profile of these gradient copolymers, and can be theoretically determined because of its dependence on the molar fraction in the copolymer. From this dependence on chemical composition along with the experimental behavior, a prediction of the T_g variation with the MW was performed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1845–1855, 2007     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

Cloud point suppression in dilute solutions of model gradient copolymers with prespecified composition profiles

Gradient copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐(dimethylamino)ethyl methacrylate (DMAEMA) having prescribed linear, parabolic, and hyperbolic composition profiles were synthesized with the guidance of a numerical model that determines the instantaneous comonomer feed rate. These materials exhibit low polydispersity indices (<1.1); the evolution of the overall DMAEMA content and the absolute molecular weight of the copolymers are all in good agreement with the quantities predicted by our model. Compared to random copolymers of HEMA and DMAEMA, the cloud points of dilute buffered aqueous solutions of gradient copolymers decrease with increasing gradient strength; where the gradient strength is defined as the largest difference in the instantaneous composition along the copolymer. The temperature range over which the solutions transition from transparent to turbid also broadens significantly with increasing gradient strength. Both observations suggest the onset of transition to be dictated by the least soluble ends of the polymer chains. These correlations point to the importance of monomer sequence distribution in determining the macroscopic physical properties of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Copolymerizations of tetraethyl vinylidene phosphonate. Bisphosphonate units in the main polymer chain. II

This is the second part of the article with a subtitle “… The First Synthesis” published by us previously. For this, second part, we have chosen copolymers with low proportion of (‐b‐) units, as well as random copolymers with substantial proportions of (‐b‐) units. This is in contrast to the part I, in which we mostly described alternating copolymerization. In this article, radical copolymerization of tetraethyl vinylidene phosphonate (B) with several vinyl/ethylenic monomers (M₂), namely acrylamide, methacrylamide, methyl methacrylate, n‐butyl acrylate, n‐butyl methacrylate, and styrene has been described and reactivity ratios of monomers as well as the average length of the comonomer blocks (n) have been determined (r₁ = 0). It has been found, that (as it should be) there is a proportionality between r₂ (=k_m2M2/k_m2B) and n. Moreover, there is a proportionality between r₂ (or n) and the comonomer (M₂) “reactivity,” defined as the rate constant of M₂ addition to the styrene radical. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1614–1621     

Well‐defined amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(vinyl acetate) side chains

A series of well‐defined amphiphilic graft copolymers containing hydrophilic poly(acrylic acid) (PAA) backbone and hydrophobic poly(vinyl acetate) (PVAc) side chains were synthesized via sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization followed by selective hydrolysis of poly(tert‐butyl acrylate) backbone. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl) acrylate, was first prepared, which can be polymerized via RAFT in a controlled way to obtain a well‐defined homopolymer with narrow molecular weight distribution (M_w/M_n = 1.08). This homopolymer was transformed into xanthate‐functionalized macromolecular chain transfer agent by reacting with o‐ethyl xanthic acid potassium salt. Grafting‐from strategy was employed to synthesize PtBA‐g‐PVAc well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n < 1.40) via RAFT of vinyl acetate using macromolecular chain transfer agent. The final PAA‐g‐PVAc amphiphilic graft copolymers were obtained by selective acidic hydrolysis of PtBA backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media were determined by fluorescence probe technique. The micelle morphologies were found to be spheres. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6032–6043, 2009     

Synthesis of SiO2/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres via miniemulsion polymerization

A series of SiO₂/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres with various morphologies (e.g., multicore–shell, normal core–shell, and raspberry‐like) were synthesized via miniemulsion polymerization. The results showed that the morphology of the composite latex particles was strongly influenced by the presence or absence of the soft monomer (butyl acrylate), the particle sizes of the silica, and the emulsifier concentrations. The incorporation of the soft monomer helped in forming the multicore–shell structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3202–3209, 2006     

Synthesis,surface property,micellization and pH responsivity of fluorinated gradient copolymers

In this work, fluorinated nonamphiphilic gradient copolymers of tert‐butyl acrylate (tBA) and 2,2,3,3,4,4,4‐heptafluorobutyl methacrylate (HFBMA) [poly(tBA‐grad‐HFBMA)] were first synthesized by semibatch atom transfer radical copolymerization of tBA and HFBMA. Their hydrolysis at acidic conditions led to amphiphilic poly(acrylic acid‐grad‐HFBMA). The chemical compositions and structures of these copolymers were characterized by proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography. Their surface properties were evaluated with water contact angle measurement and x‐ray photoelectron spectroscopy. The micellization behaviors of amphiphilic copolymer were also studied by transmission electron microscopy and dynamic light scattering. The results showed that the fluorinated and amphiphilic gradient copolymers could self‐assemble in a dilute solution to form aggregates of morphologies. Furthermore, the effect of pH on the aggregates was investigated to verify that the resulting gradient copolymers were to some extent pH sensitive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

ATNRC and SET‐NRC synthesis of PtBA‐g‐PEO well‐defined amphiphilic graft copolymers

A series of new well‐defined amphiphilic graft copolymers containing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) side chains were reported. Reversible addition‐fragmentation chain transfer homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was first performed to afford a well‐defined backbone with a narrow molecular weight distribution (M_w/M_n = 1.07). The target poly(tert‐butyl acrylate)‐g‐poly(ethylene oxide) (PtBA‐g‐PEO) graft copolymers with low polydispersities (M_w/M_n = 1.18–1.26) were then synthesized by atom transfer nitroxide radical coupling or single electron transfer‐nitroxide radical coupling reaction using CuBr(Cu)/PMDETA as catalytic system. Fluorescence probe technique was employed to determine the critical micelle concentrations (cmc) of the obtained amphiphilic graft copolymers in aqueous media. Furthermore, PAA‐g‐PEO graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PEO side chains kept inert. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyolefin graft copolymers via living polymerization techniques: Preparation of poly(n‐butyl acrylate)‐graft‐polyethylene through the combination of Pd‐mediated living olefin polymerization and atom transfer radical polymerization

Poly(n‐butyl acrylate)‐graft‐branched polyethylene was successfully prepared by the combination of two living polymerization techniques. First, a branched polyethylene macromonomer with a methacrylate‐functionalized end group was prepared by Pd‐mediated living olefin polymerization. The macromonomer was then copolymerized with n‐butyl acrylate by atom transfer radical polymerization. Gel permeation chromatography traces of the graft copolymers showed narrow molecular weight distributions indicative of a controlled reaction. At low macromonomer concentrations corresponding to low viscosities, the reactivity ratios of the macromonomer to n‐butyl acrylate were similar to those for methyl methacrylate to n‐butyl acrylate. However, the increased viscosity of the reaction solution resulting from increased macromonomer concentrations caused a lowering of the apparent reactivity ratio of the macromonomer to n‐butyl acrylate, indicating an incompatibility between nonpolar polyethylene segments and a polar poly(n‐butyl acrylate) backbone. The incompatibility was more pronounced in the solid state, exhibiting cylindrical nanoscale morphology as a result of microphase separation, as observed by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2736–2749, 2002