Effect of structure on properties of aromatic-aliphatic polybenzimidazoles. II

Polybenzimidazoles (PBI) with p-phenylene and/or cis-vinylene groups in the backbone were prepared from terephthalic acid (T), maleic acid (M), and 3,3′ diamino-benzidine tetrahydrochloride dihydrate (DAB) in poly(phosphoric acid) (PPA). Five polymer samples were prepared by varying the M:T molar ratios in the following order: 1:0, 1:1, 2:1, 1:2, and 1:4. The polymers were characterized by intrinsic viscosity, density, electronic fluorescence, and IR spectra. The effect of composition on the solubility of the polymers in various organic solvents was also investigated. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in air and polybenzimidazoles (PBI) with cis-vinylene groups were found to be less stable.     

Synthesis of novel polybenzimidazoles with pendant amino groups and the formation of their crosslinked membranes for medium temperature fuel cell applications

A series of new polybenzimidazoles (PBIs) with pendant amino groups have been synthesized via condensation polymerization of 5‐aminoisophthalic acid (APTA), isophthalic acid (iPTA), and 3,3′diaminobenzidine (DAB) in polyphosphoric acid at 190 °C for 20 h. The molar ratios between APTA and iPTA were controlled at 1:0, 2:1, 1:1, and 1:2, respectively, and the copolymerization reactions were carried out via both random and sequenced manners. The resulting polymers showed good solubility in some organic solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethylacetamide (DMAc). The pendant amino groups of the PBIs were utilized to react with two kinds of crosslinkers, 1,3‐dibromopropane and ethylene glycol diglycidyl ether, to yield various crosslinked membranes. The crosslinked membranes generally showed good mechanical properties even at high‐phosphoric acid (PA) doping levels, whereas the uncrosslinked membranes highly swelled or even dissolved in PA. Fenton's test revealed that the crosslinked PBI membranes had excellent radical oxidative stability. The proton conductivities of the PA‐doped crosslinked membranes increased with an increase in temperature and high‐proton conductivity up to 0.14 S/cm at 0% relative humidity at 170 °C was achieved. The membranes with high PA‐doping levels, good mechanical properties, and high‐proton conductivities have been successfully developed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Synthesis and characterization of high molecular weight hexafluoroisopropylidene‐containing polybenzimidazole for high‐temperature polymer electrolyte membrane fuel cells

A high molecular weight, thermally and chemical stable hexafluoroisopropylidene containing polybenzimidazole (6F‐PBI) was synthesized from 3,3′‐diaminobenzidine (TAB) and 2,2‐bis(4‐carboxyphenyl) hexafluoropropane (6F‐diacid) using polyphosphoric acid (PPA) as both the polycondensation agent and the polymerization solvent. Investigation of polymerization conditions to achieve high molecular weight polymers was explored via stepwise temperature control, monomer concentration in PPA, and final polymerization temperature. The polymer characterization included inherent viscosity (I.V.) measurement and GPC as a determination of polymer molecular weight, thermal and chemical stability assessment via thermo gravimetric analysis and Fenton test, respectively. The resulting high molecular weight polymer showed excellent thermal and chemical stability. Phosphoric acid doped 6F‐PBI membranes were prepared using the PPA process. The physiochemical properties of phosphoric acid doped membranes were characterized by measuring the phosphoric acid doping level, mechanical properties, and proton conductivity. These membranes showed higher phosphoric acid doping levels and higher proton conductivities than the membranes prepared by the conventional membrane fabrication processes. These membranes had sufficient mechanical properties to be easily fabricated into membrane electrode assemblies (MEA) and the prepared MEAs were tested in single cell fuel cells under various conditions, with a focus on the high temperature performance and fuel impurity tolerance. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4064–4073, 2009     

Degradable poly(ethylene oxide) hydrogels formed by crosslinking with tert‐butylperoxybenzoate

Poly(ethylene oxide) (PEO, number‐average molecular weight: 2,000,000) was crosslinked by reaction with t‐butylperoxybenzoate in the melt. Upon swelling in water, the resulting hydrogels were acidic and suggested clear evidence of spontaneous hydrolysis that continued over periods of several weeks to give clear and low‐viscosity aqueous solutions of PEO oligomers. In contrast, in neutral media the gels did not show any signs of hydrolysis. As shown by UV, IR, and size exclusion chromatographic analysis, the PEO hydrolysis products consist of benzoic acid and hydroxyl‐ and carboxyl end‐functionalized low‐molecular‐weight PEOs. This is consistent with the acid‐catalyzed hydrolysis of acetal‐, orthoester‐, and similar end‐functionalized PEOs formed by radical coupling of various PEO radicals with benzoate, alkoxy, and other radicals. Titration of the hydrolysis mixtures indicated that the total molar amount of acid exceeds that of the maximum amount of benzoic acid produced during gel formation. However, the amount of benzoic acid equaled this maximum amount. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 520–527, 2003     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317     

Synthesis of linear and hyperbranched poly(etherketone)s containing flexible oxyethylene spacers

As an alternative to strong acid reaction media for the Friedel–Crafts acylation for a polymer‐forming reaction, a mild polyphosphoric acid (PPA) with optimized amount of phosphorous pentoxide (P₂O₅) has been tested for the polymerization of AB monomers 4‐(2‐phenoxyethoxy)benzoic acid and 3‐(2‐phenoxyethoxy)benzoic acid, and an AB₂ monomer 3,5‐bis(2‐phenoxyethoxy)benzoic acid. The reaction progress of AB₂ monomer was conveniently traced by FTIR spectroscopy monitoring aromatic ketone (C?O) stretching bands arisen from carboxylic acid groups at the chain ends and carbonyl groups in the backbone as a function of reaction time at 110 °C. The resultant linear and hyperbranched polymers containing flexible oxyethylene spacers, which were prone to be hydrolyzed in strong acids at elevated temperature, displayed high intrinsic viscosities. Thus, the reaction medium PPA/P₂O₅ mixture as an electrophilic substitution reaction was indeed benign not to depolymerize growing polymer molecules but strong enough for the direct generation of carbonium ion from carboxylic acid to promote efficient polymerization. The resultant hyperbranched poly(etherketone) (PEK) displayed the best solubility among samples. All PEKs showed good thermal stability; glass transition temperatures were in the range of 90–117 °C; 5% weight loss generally occurred at greater than 345 °C in air. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5112–5122, 2007     

Synthesis and characterization of negative‐type photosensitive hyperbranched polyimides with excellent organosolubility from an A2 + B3 monomer system

A series of photosensitive hyperbranched polyimides (HB‐PIs) were prepared through facile end‐group modifications of the fully imidized polymer. A triamine, 1,3,5‐tris(4‐aminophenoxy)benzene, and a dianhydride, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, were condensed with a dropwise addition method in a molar ratio of 1/2 to afford an anhydride‐terminated poly(amic acid) precursor, which was then end‐capped by 4‐aminophenol and chemically imidized to yield a phenol‐terminated HB‐PI. The modifications of the terminal phenol groups of the polyimide by acyl chloride compounds (acryloyl chloride, methylacryloyl chloride, and cinnamoyl chloride) gave the target polymers. The photosensitive HB‐PIs showed good thermal properties and excellent solubility even in low‐boiling‐point solvents at room temperature, such as acetone, 1,1,2‐trichloroethane, tetrahydrofuran, and chloroform. Photosensitive property studies revealed good photolithographic properties with a resolution greater than 3 μm and a sensitivity of 650–680 mJ/cm². © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1735–1744, 2004     

Biotin functionalized poly(sulfonic acid)s for bioconjugation: In situ binding monitoring by QCM‐D

We describe the synthesis of biotin end functionalized poly(sulfonic acid)s via living radical polymerization (LRP) for conjugation to Avidin. Quartz crystal microbalance (QCM‐D) and competitive binding studies were used to confirm this conjugation. A biotin initiator for copper‐mediated LRP was used to provide acrylamide and methacrylate based polymers with the functional end group. This investigation revealed that 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid was not a suitable monomer in its acid form but was successfully used in its sodium salt form. A second monomer, 3‐sulfopropylmethacrylate as the potassium salt was also studied and both monomers produced polymers with polydispersities <1.3 and 1.4, respectively. Evolution of molecular weight with respect to time indicated that the polymerization of the acrylamide polymer is controlled. Quartz crystal microbalance with dissipation monitoring was used to confirm that the biotinylated polymers were able to bind to Avidin in situ. The gold surface of a quartz crystal was chemically modified resulting in a stable monolayer of Avidin; the biotinylated polymers were passed over the functionalized surface and their grafting ability was examined. A competitive binding evaluation was undertaken with 2‐(4‐hydroxyphenylazo)benzoic acid (HABA) dye to provide visual verification of conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003     

Amphiphilic block copolymers containing thermally degradable poly(phthalaldehyde) blocks

In this study, the preparation of a new class of amphiphilic block copolymers consisting of a poly(phthalaldehyde) (PPA) block and hydrophilic poly(alkylene oxide) blocks is described. PPA was prepared by ionic cyclopolymerization. A telechelic polymer block was prepared by endcapping of the PPA by a bifunctional reagent carrying isocyanate and isothiocyanate groups. As the second block, monoamino‐terminated poly(alkylene oxide)s (Surfonamines®, also known as Jeffamines®) were chosen. These polymers could be readily coupled to the PPA telechel and gave amphiphlic, mainly ABA‐type block copolymers. The PPA block of these products can be selectively depolymerized at moderate temperature. The block copolymers were characterized by dual‐detection size exclusion chromatography, and the defined and stepwise thermal decomposition of the two different block types were shown by thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1499–1509, 2009     

Nanocomposites derived from in situ grafting of linear and hyperbranched poly(ether‐ketone)s containing flexible oxyethylene spacers onto the surface of multiwalled carbon nanotubes

Linear and hyperbranched poly(ether‐ketone)s (PEKs) containing flexible oxyethylene spacers grafted multiwalled carbon nanotube (PEK‐g‐MWNT) nanocomposites were prepared by direct Friedel‐Crafts acylation as the polymer forming and grafting reaction. To achieve the composites, in situ polycondensations of AB monomers 3‐(2‐phenoxyethoxy)benzoic acid (3‐PEBA) and 4‐(2‐phenoxyethoxy)benzoic acid (4‐PEBA), and AB₂ monomer 3,5‐bis(2‐phenoxyethoxy)benzoic acid (3,5‐BPEBA) were carried out in the presence of multiwalled carbon nanotubes (MWNTs). The reaction conditions, polyphosphoric acid (PPA) with additional phosphorous phentoxide (P₂O₅) in the temperature range of 110–120 °C, were previously optimized. The conditions were used as the polymerization and grafting medium that were indeed benign not to damage MWNTs but strong enough to promote the covalent attachment of PEKs onto the surface of the electron‐deficient MWNTs. From scanning electron microscopy (SEM) and transmission electron microscopy studies, the polymers were uniformly grafted onto the MWNTs. The resultant nanocomposites are soluble in most strong acids such as trifluoroacetic acid, methanesulfonic acid, and sulfuric acid. Both isothermal and dynamic TGA studies in air showed that nanocomposites displayed improved thermo‐oxidative stability when compared with those of corresponding PEK homopolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3471–3481, 2008     

The effects of dopant acids on structure and properties of poly(o‐methoxyaniline)

Poly(o‐methoxyaniline) (POMA) was chemically synthesized using ammonium persulfate (APS) as oxidant. Methane sulfonic acid (MSA), hydrochloric acid (HCl), and p‐toluene sulfonic acid (pTSA) were used as dopants, under the same reaction conditions. For comparison, undoped POMA was also synthesized. The polymer samples were characterized by Fourier transform infrared spectroscopy (FTIR), four‐probe conductivity measurement, scanning electron microscopy (SEM), electron spin resonance (ESR), gel permeation chromatography (GPC), and determination of specific surface area. The antioxidant activities of POMA were assessed via reaction with 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) free radical, and the anti‐microbial activities were determined as minimum bactericidal concentrations against E. coli 25422 and S. aureus 6838. When doped with relatively strong acids, high yield (above 84%) was achieved, compared to the relatively low yield (45%) when no dopant was present. The conductivity decreased in the order POMA‐pTSA > POMA‐HCl > POMA‐MSA > undoped POMA. A polaron conduction mechanism was supported by FTIR and ESR spectra. The morphology of the polymers was found to be effectively controlled by dopants. All POMA polymers showed strong free radical scavenging ability, which was highly correlated with the specific surface areas of the polymer particles. All the tested samples showed activity against S. aureus 6838, but not at the concentrations tested against E. coli 25422. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of telechelic polymethacrylates via RAFT polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique has been employed to synthesize linear α,ω ‐telechelic polymers with either hydroxyl or carboxyl end groups. Methyl methacrylate, butyl methacrylate, and butyl acrylate were polymerized with RAFT polymerization. The polymerizations exhibited the usual characteristics of living processes. Telechelic polymethacrylates were obtained from a hydroxyl monofunctional RAFT polymer with a two‐step chain‐end modification procedure of the dithioester end group. The procedure consisted of an aminolysis followed by a Michael addition on the resulting thiol. The different steps of the procedure were followed by detailed analysis. It was found that this route was always accompanied by side reactions, resulting in disulfides and hydrogen‐terminated polymer chains as side products next to the hydroxyl‐terminated telechelic polymers. Telechelic poly(butyl acrylates) with carboxyl end groups were produced in a single step procedure with difunctional trithiocarbonates as RAFT agents. The high yield in terms of end group functionality was confirmed by a new critical‐liquid‐chromatography method, in which the polymers were separated based on acid‐functionality and by mass spectrometry analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 959–973, 2005     

High temperature creep behavior of phosphoric acid‐polybenzimidazole gel membranes

This work investigates the effects of polymer solids content and macromolecular structure on the high temperature creep behavior of polybenzimidazole (PBI) gel membranes imbibed with phosphoric acid (PA) after preparation via a polyphosphoric acid (PPA) mediated sol‐gel process Low‐solids, highly acid‐doped PBI membranes demonstrate outstanding fuel cell performance under anhydrous, ambient pressure, and high temperature (120–200 °C) operating conditions. However, PBI membranes are susceptible to creep under compressive loads at elevated temperatures, so their long‐term mechanical durability is a major concern. Here, we report results for the creep behavior of PBI membranes subject to compression at 180 °C. For para‐ and meta‐PBI homopolymers, increasing polymer solids content results in lower creep compliance and higher extensional viscosity, which may be rationalized by increasing chain density in the sol‐gel network. Comparing various homo‐ and copolymers at similar solids loading, differences in creep behavior may be rationalized in terms of chain–chain and chain‐solvent interactions that control macromolecular solubility and stiffness in the PA solvent. The results demonstrate the feasibility of improving the mechanical properties of PA‐doped PBI membranes by control of polymer solids content and rational design of PBI macromolecular structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1527–1538     

Are o‐nitrobenzyl (meth)acrylate monomers polymerizable by controlled‐radical polymerization?

We report on the controlled‐radical polymerization of the photocleavable o‐nitrobenzyl methacrylate (NBMA) and o‐nitrobenzyl acrylate (NBA) monomers. Atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer polymerization (RAFT), and nitroxide‐mediated polymerization (NMP) have been evaluated. For all methods used, the acrylate‐type monomer does not polymerize, or polymerizes very slowly in a noncontrolled manner. The methacrylate‐type monomer can be polymerized by RAFT with some degree of control (PDI ∼ 1.5) but leading to molar masses up to 11,000 g/mol only. ATRP proved to be the best method since a controlled‐polymerization was achieved when conversions are limited to 30%. In this case, polymers with molar masses up to 17,000 g/mol and polydispersity index as low as 1.13 have been obtained. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6504–6513, 2009     

Thermally stable polymers from 1,4,5,8-naphthalenetetracarboxylic acid and aromatic tetraamines

Polycondensations of 1,4,5,8-naphthalenetetracarboxylic acid (NTCA) with both 3,3′-diaminobenzidine (DAB) and 1,2,4,5-tetraaminobenzene tetrahydrochloride (TAB) in polyphosphoric acid (PPA) were found to produce soluble polymers which exhibit excellent thermal stabilities. Polymer structures were deduced from infrared, thermal, and elemental analyses of model compounds and polymers. Polymer derived from TAB had a ladder-type structure. Polymers with solution viscosities near 1 or above (determined in H₂SO₄) were obtained from polymerizations near 200°C., and analysis showed these to possess a very high degree of completely cyclized benzimidazobenzophenanthroline structure. Less vigorous reaction conditions gave polymers with lower solution viscosities which appeared to be less highly cyclized. Low-viscosity polymer was also prepared from DAB and NTCA by solid-phase polycondensation. Some advancements in the solution viscosities of polymers synthesized from DAB in PPA were caused by second staging in the solid phase.     

Synthesis and properties of a new fluorine‐containing polybenzimidazole for high‐temperature fuel‐cell applications

An amorphous, organosoluble, fluorine‐containing polybenzimidazole (PBI) was synthesized from 3,3′‐diaminobenzidine and 2,2‐bis(4‐carboxyphenyl)hexafluoropropane. The polymer was soluble in N‐methylpyrrolidinone and dimethylacetamide and had an inherent viscosity of 2.5 dL/g measured in dimethylacetamide at a concentration of 0.5 g/dL. The 5% weight loss temperature of the polymer was 520 °C. Proton‐conducting PBI membranes were prepared via solution casting and doped with different amounts of phosphoric acid. In the methanol permeability measurement, the PBI membranes showed much better methanol barrier ability than a Nafion membrane. The proton conductivity of the acid‐doped PBI membranes increased with increasing temperatures and concentrations of phosphoric acid in the polymer. The PBI membranes showed higher proton conductivity than a Nafion 117 membrane at high temperatures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4508–4513, 2006     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999