Modeling the effect of crosslinking in methyl-pendant poly(p-phenylene benzobisthiazole)

Molecular mechanics and dynamics simulations have been performed on methyl-pendant PBZT to study the effects of intermolecular crosslinking. Several possible crosslinked structures were investigated. The effect of crosslinking was found to be strongly dependent upon crosslink type and, in some instances, crosslink density. A significant axial stress is predicted to occur upon the formation of phenyl-to-phenyl type crosslinks. This provides a reasonable explanation for the experimental observation of transverse cracks in the skin of crosslinked, MePBZT fiber. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3057–3064, 1998     

Polyurethanes crosslinked by metals and their complexes with crown ether

Two types of crosslinked polyurethanes (PU) have been synthesized: (a) PU crosslinked by metal ions (Cu²⁺ and Co²⁺), and (b) PU crosslinked by the complexes of metals with crown ether. Using X-ray scattering under small and wide angles the peculiarities of the structure of networks have been investigated. It was found that PU crosslinked by the metal crown ether complexes have a looser structure because of the bulky crosslink and diminished molecular mobility of the chains between two crosslinks, as was proven by the dielectric spectroscopy method. The X-ray and IR data have allowed proposing a scheme of the structure of the crosslinked PU with various types of crosslinks. The structures discovered may be considered as similar to metal catenandes. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1379–1386, 1998     

Densely crosslinked polycarbosiloxanes. II: Thermal and mechanical properties

The thermal and mechanical properties of two densely crosslinked polycarbosiloxane systems were investigated in relation to the molecular structure. The networks were prepared from functional branched prepolymers and crosslinked via a hydrosilylation curing reaction. The prepolymers having only vinyl functionalities (poly[phenylmethylvinyl]siloxanes) were crosslinked by using crosslinking agents with reactive silicon–hydrogen groups. In prepolymers having both silicon–vinyl and silicon–hydrogen groups (poly[phenylmethylvinylhydro)]siloxanes crosslinking took place intermolecularly. The thermal and mechanical properties of the polymer networks were found to be dependent on the phenyl  Si O_3/2 (branches) content in the prepolymer, the number of elastically effective crosslinks, the elastically effective network chain density and molecular weight between crosslinks, length of the chain segments introduced by the hydrosilylation crosslinking reaction, and the number of dangling ends. As a consequence of the dense crosslinking, the mechanical properties were also strongly dependent on the glass transition temperature. A tough–brittle transition was observed around the glass transition temperature of the polymer networks. The properties of the poly(phenylmethylvinylhydro)siloxane networks were found to be superior to those of the poly(phenylmethylvinyl)siloxane networks. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1311–1331, 1997     

Crosslinking and pyrolytic behavior of natural and man-made cellulosic fibers

Pyrolysis rates, energies of activation, and DSC data were obtained for cellulosic fibers crosslinked with increasing amounts of formaldehyde. Pyrolysis rates are affected by the reduction in degree of polymerization, the breaking of intermolecular hydrogen bonds, and the introduction of covalent linkages that accompany the crosslinking process. Thermal stabilization of cellulose is related mainly to the formation of interchain crosslinks. The influences of the crystallinity and orientations of the polymers upon changes in thermal stability and pyrolytic behavior due to crosslinking are demonstrated.     

Liquid crystalline epoxides with long lateral substituents: Mechanical and thermal properties

In this work, mechanical and thermal properties of liquid crystalline epoxides (LCEs) with long lateral substituents from 4 to 12 carbon atoms cured with diaminodiphenylmethane were evaluated and analyzed by dynamic mechanical analysis, tensile tests, scanning electron micrographs (SEM), and thermo‐gravimetrical analysis. The experimental results indicated that the Young's modulus and α, β transitions in crosslinked networks are associated with the length of lateral substituents. The plastic deformation in fracture surfaces was observed by SEM. Thermal stability, water and solvent absorption of cured networks was dependent on the length of lateral substituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2835–2841, 2007     

Thermoreversible covalent crosslinking of maleated ethylene/propylene copolymers with diols

The objective of this study is the thermoreversible crosslinking of maleated ethylene/propylene copolymer (MAn‐g‐EPM) using the equilibrium reaction with diols. Covalent hemi‐ester crosslinks are formed via the reaction of anhydrides with alcohols, while an equilibrium shift at elevated temperatures may result in their removal. High conversions to hemi‐ester are obtained at low temperatures in the presence of p‐toluenesulfonic acid, whereas conversions are low at high temperatures. The presence of microphase‐separated aggregates acting as physical crosslinks was demonstrated for MAn‐g‐EPM and all crosslinked materials. The covalent crosslinks were only formed within the aggregates, resulting in stronger aggregates that persisted to higher temperatures. The tensile strength and elasticity were significantly improved upon increasing level of crosslinking, whereas the type of diol has less influence. The covalently crosslinked MAn‐g‐EPM was reprocessable via compression molding at temperatures above 175 °C. Irreversible diester formation occurred for the longer diols, but did not prevent reprocessing, while short diols evaporated. Both effects lowered the level of crosslinking, resulting in significantly changed mechanical properties. The reprocessability does not originate from an equilibrium shift, but from a dynamic exchange between crosslinked and non‐crosslinked functional groups, which allows crosslinks to disconnect and the corresponding chain segments to diffuse between aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1810–1825, 2008     

Shell crosslinked polymer assemblies: Nanoscale constructs inspired from biological systems

The general approach involving the organization of polymers into micellar assemblies followed by stabilization through covalent intramicellar crosslinking of the assemblies has emerged as a powerful method for the production of well‐defined nanostructured materials, having an amphiphilic core‐shell morphology. When the covalent crosslinks are limited to the chain segments that compose the polymer micelle shell, then shell crosslinked knedel‐like (SCK) nanostructures result. The shell composition dictates the interactions of the SCKs with external agents, forms a barrier layer over the core domain, and provides robust character to the nanoparticle. Because of the stability that the crosslinked shell provides, the core domain can be of dramatically different compositions and properties—glassy, fluidlike, and crystalline polymer chains have been employed for the core material and the effects that each contributes to the overall nanostructure properties have been examined. Most notably, the shell crosslinks allow for complete removal of the core to generate hollow (solvent‐filled) nanoscale cagelike structures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1397–1407, 2000     

Kinetics of re‐embrittlement of (anti)plasticized glassy polymers after mechanical rejuvenation

Mechanical rejuvenation is known to dramatically alter the deformation behavior of amorphous polymers. Polystyrene (PS)—for example, typically known as a brittle polymer—can be rendered ductile by this treatment, while a ductile polymer like polycarbonate (PC) shows no necking anymore and deforms homogeneously in tensile deformation. The effects are only of temporary nature, as because of physical aging the increasing yield stress, accompanied by intrinsic strain softening, renders PS brittle after a few hours, while for PC necking in tensile testing returns in a few months after the mechanical rejuvenation treatment. In this study, it is found that physical aging upon rejuvenation in both PS and PC can be delayed in two different ways: (1) by reducing the molecular mobility through antiplasticization and (2) by applying toughening agents (rubbery core–shell particles). For the first route, even though progressive aging is found to decrease with increasing amounts of antiplasticizer added, dilution of the entanglement network results in enhanced brittleness. Besides antiplasticization effects, also some typical plasticization effects are observed, like a reduction in matrix T_g. For the second route, traditional rubber toughening using acrylate core–shell modifiers also results in a reduced yield stress recovery, and ductile tensile deformation behavior is observed even 42 months after mechanical rejuvenation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 134–147, 2008     

Crosslinking PMMA: Molecular dynamics investigation of the shear response

Crosslinking can fundamentally change the mechanical properties of a linear glassy polymer. It has been experimentally observed that when lightly crosslinked, poly(methyl‐methacrylate) (PMMA) has a characteristically more ductile response to mechanical loading than does linear PMMA despite having a higher glass transition temperature. Here, molecular dynamics (MD) simulations are used to investigate conformational and energetic differences between linear PMMA and lightly crosslinked PMMA under shear deformation. As consistent with experiments, crosslinked PMMA is found to have a reduced yield stress relative to linear PMMA. Using the probing capabilities of our explicit atom MD approach, it is observed that while the crosslinks have a minimal direct energy contribution to the total system, they can alter how the main chains conform to macroscopic loading. In crosslinked PMMA, the backbone aligns more with the direction of external loading, thereby reducing the force applied to (and associated deformation of) the polymer bonds. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 444–449     

Double network hydrogels with controlled shape deformation: A mini review

Double network hydrogels (DN gels), consisting of two networks with strongly asymmetric network structures and properties, are one of most investigated high strength hydrogels. In most cases, the first network of DN gels is rigid, brittle and tightly crosslinked, while the second network is soft, ductile and loosely crosslinked. Because of the tunable and diverse network structures, DN gels with controlled shape deformation have attracted great attention in recent years. The shape deformation of DN gels can be controlled by first network, second network, or both networks. In this mini review, the shape deformation of DN gels via different networks will be summarized, and the application and future perspectives also are discussed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1351–1362     

Measurements of freezing‐point depression to evaluate rubber network structure. Crosslinking of natural rubber with dicumyl peroxide

An experimental approach based on the freezing‐point depression of a solvent in a swollen gel has been developed to characterize the structure of rubber networks. This property depends on the conditions required for the formation of crystalline nuclei, which are limited by the elastomer network restrictions. Information about the functionality, spatial distribution, and number of crosslinks can be obtained by the use of this easy and ready experimental method. Application of the tube model of rubber elasticity in the uniaxial stress–strain experiments of natural rubber samples vulcanized with dicumyl peroxide yields the characteristic parameters of the rubber networks, which are in concordance with the network structures predicted by the freezing point method. Finally influence of vulcanization conditions in network structure and its relationship with the mechanical properties was evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 544–556, 2007     

Effect of molecular weight and temperature on physical aging of thin glassy poly(2,6-dimethyl-1,4-phenylene oxide) films

The effects of polymer molecular weight and temperature on the physical aging of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) is examined. Gas permeability and refractive index were monitored during the aging process for PPO film samples at three aging temperatures below the glass transition temperature. Comparisons between the two samples of PPO that differ widely in molecular weight reveal an insignificant difference, which support the notion that above a critical molecular weight range there is little influence on aging rate. Increased temperature, over the limited range of 35–55 °C, results in higher aging rates for films made from both PPO materials. The rate of aging decreases strongly with increasing film thickness over the range examined, ∼0.4–25 μm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1390–1398, 2007     

Modification of poly(vinyl chloride). XIII. Crosslinking of poly(vinyl chloride) with dithiols and properties of the crosslinked products

PVC was crosslinked by immersing PVC–dithiol blends in ethylenediamine at 30°C. Properties of the products depended on the chain length and chemical structure of the crosslinkage and on the molecular weight of the polymer chain between crosslinks M_c. Crosslinking by the agent of soft structure and long molecular chain resulted in high tensile strength at break and impact strength and low brittle temperature. The use of the crosslinking agent of short molecular chain gave high yield strength, Young's modulus, and heat distortion temperature. The relation of M_c and the chemical structure of the crosslinks to the properties of the crosslinked rigid polymer was discussed in regard to the crosslinking effect and plasticizing effect.     

Structures of reagent residues resulting from reactions of divinyl sulfone with cotton cellulose

Cotton cellulose in fabric form was crosslinked with divinyl sulfone by catalysis with solutions of sodium hydroxide of normalities ranging from 0.1 to 4.0. The molecular chains of cellulose were hydrolyzed with sulfuric acid to yield hydrolyzates from which simple substituted glucoses (i.e., those bonded to a single unit of DVS), the simple crosslinked glucoses (i.e., those joined together by a single unit of DVS), and complex structures (i.e., those substituted or crosslinked with more than one unit of DVS in the chain) were isolated and measured. The fractions of the reagent residues in the forms of the structures noted above were found to change substantially with the concentration of base employed to catalyze the reaction. The constitution of the reagent residues resulting from reaction in 0.1N base was remarkably simple: 82% of the DVS residues in the form of simple crosslinks and 18% in the form of simple substituents. Complex structures accounted for as much as 70% of the DVS residues under other conditions of reaction.     

Synthesis and characterization of photocrosslinked poly(ε‐caprolactone)s showing shape‐memory properties

Poly(ε‐caprolactone) (PCL) with a pendent coumarin group was prepared by solution polycondensation from 7‐(3,5‐dicarboxyphenyl) carbonylmethoxycoumarin dichloride and α, ω‐dihydroxy terminated poly(ε‐caprolactone) with molecular weights of 1250, 3000, and 10,000 g/mol. These photosensitive polymers underwent a rapid reversible photocrosslinking upon exposure to irradiation with alternating wavelengths (>280/254 nm) without a photoinitiator. The thermal and mechanical properties of the photocrosslinked films were examined by means of differential scanning calorimetry and stress–strain measurements. The crosslinked films exhibited elastic properties above the melting temperature of the PCL segment along with significant decrease in the ultimate tensile strength and Young's modulus. Shape‐memory properties such as strain fixity ratio (R_f) and strain recovery ratio (R_r) were determined by means of a cyclic thermomechanical tensile experiments under varying maximum strains (ε_m = 100, 300, and 500%). The crosslinked ICM/PCL‐3000 and ‐10,000 films exhibited the excellent shape‐memory properties in which both R_f and R_r values were 88–100% for tensile strain of 100–500%; after the deformation, the films recovered their permanent shapes instantaneously. In vitro degradation was performed in a phosphate buffer saline (pH 7.2) at 37 °C with or without the presence of Pseudomonas cepacia lipase. The presence of the pendent coumarin group and the crosslinking of the polymers pronouncedly decreased the degradation rate. The crosslinked biodegradable PCL showing a good shape‐memory property is promising as a new material for biomedical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2422–2433, 2009     

Adhesion in EPDM joints: Role of the interdiffusion mechanism on interfacial co‐crosslinking

The purpose of this study was to understand the relationship between the mechanism of interdiffusion of the polymer chains across the interface and the formation of crosslinks in the interfacial zone when two elastomer sheets are joined and crosslinked. It is commonly accepted that the strength of the interface thus obtained is related to the number of interlinks that are created in the molecular interphase. This number generally is considered as equal to the number of crosslinks determined in the bulk. Ethylene‐copropylene‐codiene polymer (EPDM) does not follow this general law. The slow diffusion of the chains at the interface may be responsible for the peculiar behavior observed. In order to separate the two mechanisms responsible for the interfacial strength, diffusion, and crosslinking, two crosslinking procedures, namely peroxide crosslinking at high temperature and electron beam crosslinking at room temperature, have been used. This latter procedure allows control of the diffusion depth. It has been shown that diffusion of EPDM chains is indeed occurring at a much slower rate than expected, leading to less efficient co‐crosslinking in the interfacial zone. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3189–3199, 2000     

Carbosilane/carbosiloxane‐based ADMET homopolymers and copolymers possessing latent reactivity

Reactive methoxy‐functionalized carbosilane and carbosiloxane dienes can be either homopolymerized or copolymerized via acyclic diene metathesis (ADMET) polycondensation chemistry to produce reactive materials with mechanical behavior dependent on the molar ratios of the comonomers. The methoxy‐functional group within the polycarbosilane repeat unit remains inert during the metathesis polymerization and can be triggered subsequently with water to generate crosslinks between polymer chains. In this way, linear, thermoplastic copolymers can be prepared with ADMET chemistry and converted into crosslinked, thermoset copolymers upon exposure to moisture. Crosslinked films containing 5–10% of the crosslinked hard segment are soft and flexible materials. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1544–1550, 2000     

A new oxidation state of aniline pentamer observed in water‐soluble electroactive oligoaniline‐chitosan polymer

A novel water‐soluble electroactive polymer, aniline pentamer crosslinked chitosan (Pentamer‐c‐Chi), was prepared by condensation polymerization of the terminal carboxyl groups in aniline pentamer with the amino side groups in chitosan in aqueous solution. The carboxyl groups were activated by N‐hydroxysuccinimide (NHS) and N,N′‐dicyclohexylcarbodiimide (DCC). The electrochemical behavior of anilinepentamer in this kind of crosslinked polymer was studied in acidic aqueous solution by means of cyclic voltammetry (CV), UV–vis, and electron spin resonance (ESR) spectroscopy. There were three reversible redox peaks in the CV of Pentamer‐c‐Chi. A new emeraldine oxidization state in the form of radical cations was proposed, which was associated with the new absorption band at 370 nm in the UV–vis spectra. The ESR of the aqueous solution of Pentamer‐c‐Chi showed a single Lorentzian shaped signal, which suggested the existence of radical cations. The new redox state was pH dependent and appeared only at pH < 3. The stability of radical cations could be attributed to the hydrogen bonds between radical cations, water, and chitosan. Morphological structure of the Pentamer‐c‐Chi can be adjusted by varying the content of aniline pentamer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1124–1135, 2008     

Electrical and mechanical behavior of filled rubber. III. Dynamic loading and the rate of recovery

Following the earlier articles in this series, the changes in the electrical resistivity and mechanical behavior as a result of static and dynamic deformation have been studied. Cyclic shear and tensile loading were used to follow the changes in stress and resistivity with strain, including the recovery with time from the effects of a large strain as monitored by the small‐strain behavior. The recovery of resistivity from a prestrain was not complete even after 7 days at room temperature or at 50 °C, but swelling with a solvent and subsequent drying produced rapid recovery. It appears from the detailed results that there are two strain regions. Below about 10% the resistance and the modulus are strongly dependent on the filler–filler structure, which can break down and reform fairly readily, but the changes at higher strains are probably influenced by changes in the elastomer matrix and also by slippage at the filler–rubber interface. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1649–1661, 2005     

Theoretical description of unconstrained thermally induced shape‐memory recovery in crosslinked polyethylenes

A new theoretical approach based on the modified three‐element Eyring‐Halsey model was developed for the derivation of an equation describing the thermally induced recovery of predeformed and crystallized crosslinked polymers. The proposed approach takes into account the influence of crystallizable covalent network and of entangled slipped molecular chains. Modeling of thermally induced shape‐memory (SM) recovery strain and SM recovery rate detected at constant heating rate has been successfully performed for nearly linear and two short‐chain branched polyethylenes, which were crosslinked by peroxide. The values of material constants determined by fitting agree with the estimations existing in literature. Fitting results have shown that increase of degree of branching and crosslink density accompanied with reducing crystallinity results in increasing contribution of the entangled slipped chains to the total stored SM strain. The physical sense of main fitting parameters and their dependences on the material constants such as crystallinity are discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 815–822