Incorporation of silver/carbon nanoparticles into poly(methyl methacrylate) via in situ miniemulsion polymerization and its influence on the glass‐transition temperature

Silver/carbon nanoparticles (9 nm) were incorporated, as reinforcements, into a matrix of poly(methyl methacrylate) via in situ miniemulsion polymerization. It was found by differential scanning calorimetry that the glass‐transition temperature of the poly(methyl methacrylate) showed an improvement of 14 °C with only 0.5 wt % nanoparticles in comparison with a pure poly(methyl methacrylate) control, which was also obtained by miniemulsion polymerization under the same conditions. This increase was related to a polymer chain mobility restriction due to a combination of bound plastic and joint plastic shell effects at the interphase and the surrounding regions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 511–518, 2007.     

Copolymerization of vinyl acetate with 1-octene and ethylene by cobalt-mediated radical polymerization

The cobalt-mediated radical polymerization of vinyl acetate was extended to copolymerization with 1-alkenes (ethylene or 1-octene). In agreement with the low amount of 1-alkene that could be incorporated into the copolymer, a gradient structure was predictable, but a rather low polydispersity was observed. A poly(vinyl acetate)-b-poly(octene) copolymer was also successfully synthesized, leading to a poly (vinyl alcohol)-b-poly(octene) amphiphilic copolymer upon the methanolysis of the poly (vinyl acetate) block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2532–2542, 2007     

Tuning the parameters of the suspension polymerization of styrene,divinylbenzene, and N‐(p‐vinylbenzyl)‐ 4,4‐dimethylazlactone

Azlactone‐functionalized microporous polystyrene resins were synthesized by suspension polymerization of styrene, divinylbenzene and N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone (VBM). A fractional factorial design of experiments (DOE) has been used to evaluate the influence of several parameters (factors) on the physical and chemical properties (responses) of the resins. Six factors were considered: (i) the organic/aqueous phase ratio, (ii) the amount of the functional monomer N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone, (iii) the amount of stabilizer, (iv) the amount of initiator, (v) the stirring speed, and (vi) the equilibration time. The process responses were the yield of polymerization, the diameter of the beads and their polydispersity, their swelling ratio in dichloromethane and the accessibility ratio of the immobilized azlactone sites. This methodology enables the determination of an optimal combination of the six factors to synthesize beads in high yield (92%) with remarkable properties for SPOS applications (azlactone sites loading = 1.57 mmol/g, swelling ratio in dichloromethane = 5.0 mL/g and 100% accessibility ratio). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3677–3686, 2007     

Morphology control in polystyrene/poly(methyl methacrylate) composite latex particles

The effect of the presence of different amounts of block copolymers [polystyrene-block-poly(methyl methacrylate)] on the morphology of polystyrene/poly (methyl methacrylate) composite latex particles was investigated. The block copolymers were produced in situ by controlled radical polymerization (CRP) through the addition of the second monomer to a seed prepared by miniemulsion polymerization with a certain amount of a CRP agent. With an increase in the amounts of the block copolymers, the particle morphology changed from a hemisphere morphology (for a latex without block copolymers, i.e., without the use of a CRP agent during the polymerization) to clear core–shell morphologies as a result of decreasing polymer–polymer interfacial tension © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2484–2493, 2007     

Chemical modification of polyamide‐6 by chain extension with 2,2′‐bis(2‐oxazoline)

The chain‐extension behavior of 2,2′‐bis(2‐oxazoline) (BOZ) was studied to evaluate the coupling effect on polyamide‐6 (PA6) in a Haake Rheocord mixer and an extruder. The relative torque of PA6 dramatically increased within 1–2 min, and the results were similar whether the added amount of BOZ in PA6 was the theoretical amount or twice as much at 240 °C; however, after 5 min, the coupling results showed an optimal dosage of the chain extender, a lack of which caused a deficiency of chain extension and an excess of which led to a greater blocking reaction. The final torque was 2.16 times as much as that of a control sample when the reaction temperature was 240 °C, and the added amount of BOZ in PA6 was 1.156%; at the same time, the initial carboxyl content of the chain‐extended products decreased to 40% for PA6, and this corresponded to the intrinsic viscosity of PA6 increasing to 1.636 dL/g, whereas that of the control sample was 1.384 dL/g. Furthermore, the effects of BOZ on the thermal and mechanical properties of chain‐extended PA6 were investigated. The degree of crystallinity decreased as the chain extender was added to PA6. The Izod impact strength, tensile strength, and elongation at break of the resultant products dramatically improved under wet conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1976–1982, 2007     

Crosslinkable polyurethane bearing a methacrylate structure in the side chain

A polyurethane bearing methacrylate groups through urethane linkages was prepared by the addition of 2‐methacryloyloxyethyl isocyanate to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate at an ambient temperature, whereas a crosslinked product was obtained from the reaction at 60 °C. The resulting linear polyurethane, bearing a methacrylate structure, was thermally crosslinkable. Its radical copolymerization with vinyl‐type monomers afforded the corresponding crosslinked polymers, whose low glass transition temperatures suggested the flexibility of the polymer chains in the crosslinked product. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3400–3407, 2007     

Epoxies toughened with triblock copolymers

Three different commercial triblock copolymers from Arkema were evaluated as potential toughening agents for two different lightly crosslinked epoxies. It was found that the plane strain fracture toughness, K_IC, was on the order of 3.0 MPa√m for 10 parts per hundred resin (phr) of NanoStrength™ E20 resin (a styrene–butadiene–methylacrylate, SBM, type triblock copolymer) in epoxies cured with either aminoethylpiperazine or piperidine. In contrast, 10 phr NanoStrength E40 resin (also an SBM type triblock copolymer) was ineffective in toughening such epoxies. The difference in toughening effectiveness was attributed to the smaller amount of polybutadiene present in the E40 resin. The third toughening agent from Arkema was NanoStrength M22 resin, which is a symmetric triblock copolymer consisting of side blocks of PMMA surrounding a center block of poly(butyl acrylate) and is designated as MAM. At 10 phr MAM both lightly crosslinked epoxies exhibited improvements in toughness. Morphologies were characterized using TEM and toughening mechanisms revealed using SEM and TOM. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1470–1481, 2007     

Nitroxide‐mediated radical polymerization in miniemulsion: Bimolecular termination in monomer‐free model systems

Bimolecular termination in nitroxide‐mediated radical polymerization in miniemulsion has been investigated through the heating of a polystyrene–2,2,6,6‐tetramethylpiperidinyl‐1‐oxy macroinitiator and its 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy analogue in an aqueous toluene dispersion with sodium dodecyl benzenesulfonate as a surfactant at 125 °C. The level of bimolecular termination by combination, evaluated from the high‐molecular‐weight shoulder, was higher in miniemulsion than in solution and increased with decreasing particle size. Quantitative analysis revealed that these results cannot be rationalized solely by nitroxide partitioning to the aqueous phase. The results are explained by an interface effect, by which nitroxide is adsorbed or located at the aqueous–organic interface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4995–5004, 2007     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry investigations of polystyrene and poly(methyl methacrylate) produced by monoacylphosphine oxide photoinitiation

The chain-end-group composition was determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses of low-molecular-weight polystyrene (PS) and poly(methyl methacrylate) (PMMA) produced by free-radical polymerization with a monoacylphosphine oxide, (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO), as a photoinitiator. Gel permeation chromatography (GPC) fractionation of the PS and PMMA samples with initial polydispersities of 1.81 and 2.81, respectively, yielded improved MALDI-TOF MS spectra. Spectral analyses of the PS fractions showed distributions attributable to PS having two diphenylphosphinyl ends and PS having one diphenylphosphinyl end and/or one 2,4,6-trimethylbenzoyl end, indicating that a combination of PS radicals with the highly reactive diphenylphosphine oxide group at one end of the chains was the predominant mode of termination. MALDI-TOF MS results for PMMA fractions provided evidence for termination primarily by disproportionation, but structure determination was confounded by the presence of isobaric peaks. Discernible peaks were obtained by MALDI-TOF MS analyses of GPC fractions of TPO-initiated poly(methyl-d₃ methacrylate-d₅), in which the major product was PMMA with a diphenylphosphinyl end group and an abstracted deuterium end group, whereas the minor combination product had two diphenylphosphinyl chain ends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2161–2171, 2007     

Synthesis and properties of polyurethanes bearing urethane moieties in the side chain

Polyurethanes bearing urethane groups in the side chains were prepared by the addition of isocyanates to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate. The resulting polyurethane had a higher glass transition temperature than the original poly(hydroxyurethane), although its esterified product had a lower glass transition temperature. The urethanization with 3‐(triethoxysilyl)propyl isocyanate also proceeded effectively to afford both soluble and insoluble polymers, depending on the reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3408–3414, 2007     

Analysis of swelling process of protein by positron annihilation lifetime spectroscopy and differential scanning calorimetry

The change in the nanoscopic structure and bound state of water in the protein gel were investigated using positron annihilation lifetime spectroscopy (PALS) and differential scanning calorimetry (DSC). Gelatin was used as a protein. To examine the bound state of water in gelatin gel, the amount of freezing and nonfreezing water in gelatin gels were evaluated by fusion enthalpy of DSC curves. Below water content of 40% (w/w), the whole amount of water was nonfreezing water, whereas above water content of 40% (w/w), the amount of freezing water increased according to increase in water content. To investigate the nanoscopic spatial structure under coexistence of polymer and water, positron annihilation lifetime measurement was performed. The lifetime of o‐Ps or the pore size increased according to increase in water content, particularly below the water content of 40% (w/w). When the water penetrates into the gelatin network, the water molecules form hydrogen bonds with hydrophilic groups inside the helical structure in gelatin gel. The water molecules inside the helical structure expand the structure outward, leading to increase in pore size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2031–2037, 2007.     

Neopenthyl glycol containing poly(propylene terephthalate)s: structure–properties relationships

Poly(propylene/neopenthyl terephthalate) random copolymers (PPT‐PNT) and poly(neopenthyl terephthalate) (PNT) were synthesized and subjected to molecular characterization. Afterwards, the polyesters were examined by TGA, DSC, andX‐ray. The copolymers, which displayed a good thermal stability, at room temperature appeared as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of the melting temperature with respect to homopolymer PPT. XRD measurements allowed the identification of the PPT crystalline structure in all cases. Amorphous samples were obtained after melt quenching, with the exception of PPT‐PNT5, and an increment of T_g as the content of NT units is increased was observed due to the effect of the side methylene groups in the polymeric chain. The Wood equation described well T_g‐composition data. Lastly, the presence of a rigid‐amorphous phase was evidenced in the copolymers, whose amount depended on composition and on thermal treatment. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 170–181, 2008     

A novel rate‐accelerating additive for atom transfer radical polymerization of styrene

The polymerization of styrene was mediated by copper (I) bromide/pentramethldiethyltriamine (PMDETA) using ethyl 2‐bromopropionate (EBP) as initiator and a catalytic amount of malononitrile (MN) as a novel rate‐accelerating additive. The optimal molar ratios of MN/EBP under which the polymerization of styrene can proceed fastest was 4:1. The rate‐enhancement‐efficiency had a dependence on temperature and the apparent rate constant of polymerization improved by a factor of 2.67 at 85 °C. Polymerization resulted in a conversion as high as 87% in 4.3 h in the presence of MN, while a conversion of 79.7% was gained even in 10 h without MN at 85 °C. The polymerizations of styrene in the presence of MN proceeded in a living fashion indicated by the first‐order kinetic plots, with the increase of M_n with respect to conversion and the relatively narrow polydispersity. The possible rate enhancing mechanism is that the addition of MN weakens the coordination between the copper center and ligand and facilitates the atom transfer process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4082–4090, 2007     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

Core‐shell microspheres with surface grafted poly(vinyl alcohol) as drug carriers for the treatment of hepatocellular carcinoma

Core(polyvinyl neodecanoate‐ethylene glycol dimethacrylate)‐shell(polyvinyl alcohol) (core (P(VND‐EGDMA))‐shell(PVA)) microspheres were developed by seeded polymerization with the use of conventional free radical and RAFT/MADIX mediated polymerization. Poly(vinyl pivalate) PVPi was grafted onto microspheres prepared via suspension polymerization of vinylneodecanoate and ethylene glycol dimethacrylate. The amount of grafted polymer was found to be independent from the technique used with conventional free radical polymerization and MADIX polymerization resulting into similar shell thicknesses. Both systems—grafting via free radical polymerization or the MADIX process—were found to follow slightly different kinetics. While the free radical polymerization resulted in a weight gain linear with the monomer consumption in solution the growth in the MADIX controlled system experienced a delay. The core‐shell microspheres were obtained by hydrolysis of the poly(vinyl pivalate) surface grafted brushes to form poly(vinyl alcohol). During hydrolysis the microspheres lost a significant amount of weight, consistent with the hydrolysis of 40–70% of all VPi units. Drug loading was found to be independent of the shell layer thickness, suggesting that the drug loading is governed by the amount of bulk material. The shell layer does not appear to represent an obstacle to the drug ingress. Cell testing using colorectal cancer cell lines HT 29 confirm the biocompatibility of the empty microspheres whereas the clofazimine loaded particles lead to 50% cell death, confirming the release of the drug. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3256–3272, 2007     

Synthesis of polymer particles possessing radical initiating sites on the surface by emulsion copolymerization and construction of core–shell structures by a photoinduced atom transfer radical polymerization approach

The crosslinked polystyrene particles possessing photofunctional N,N‐diethyldithiocarbamate groups on their surface were prepared by free‐radical emulsion copolymerization of a mixture of styrene, divinylbenzene and 4‐vinylbenzyl N,N‐diethyldithiocarbamate with redox system as an initiator under UV irradiation. In this copolymerization, the inimer 4‐vinylbenzyl N,N‐diethyldithiocarbamate acted the formation of hyperbranched structures by living radical photopolymerization. The particle sizes (number‐average particle diameter = 214–523 nm) were controlled by varying the feed amount of surfactant and size distributions were relatively narrow. Subsequently, core–shell particles were synthesized by photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by photofunctional polystyrene particles as a macroinitiator. Such core–shell particles were stabilized sterically by grafted chains in organic solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1771–1777, 2007     

Ethylene polymerization and copolymerization with a polar monomer using an α‐iminocarboxamide nickel complex activated by trimethylaluminum

An α‐iminocarboxamide nickel complex was activated by trimethylaluminum (TMA) and used in the polymerization of ethylene and its copolymerization with 10‐undecen‐1‐ol. The best activity was observed upon activation with 9 equiv of TMA at a temperature of 26 °C. NMR spectroscopic studies did not show 10‐undecen‐1‐ol incorporation. However, FTIR analyses suggest the incorporation of a very small amount of comonomer, which affects the glass transition temperature, the degree of branching, and the mechanical properties of the materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 54–59, 2008     

Synthesis and characterization of stimuli‐sensitive micro‐ and nanohydrogels based on photocrosslinkable poly(dimethylaminoethyl methacrylate)

The aim of this work was the development of a versatile route for the preparation of temperature‐ and pH‐responsive hydrogels with small dimensions. The copolymerization of N,N‐dimethylaminoethyl methacrylate with various amounts (5 and 10 mol %) of dimethylmaleimidoethyl methacrylate in solution with 2,2′‐azobisisobutyronitrile as an initiator is described. The structural and molecular characterization of the copolymers was performed with proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet spectroscopy, as well as size exclusion chromatography. Differential scanning calorimetry and thermogravimetry were used for the thermal characterization of the copolymers. Micro‐ and nanohydrogels of the copolymers were prepared by photocrosslinking. The gels obtained by photocrosslinking were characterized with a combination of surface plasmon resonance and optical waveguide spectroscopy, dynamic light scattering, and scanning electron microscopy. The hydrogels showed temperature‐ and pH‐responsive behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 669–679, 2007     

New sulfur-centered radicals as photopolymerization initiating species

New thiols and disulfides are proposed as radical polymerization photoinitiators or coinitiators. The drawback of the bad smell is strongly limited for the proposed compounds. Among the systems investigated, the disulfides photosensitized by isopropylthioxanthone and the tetrazole-derived thiols in the presence of benzophenone, camphorquinone, or isopropylthioxanthone have been found to be highly reactive and, in some cases, even better than a reference type I or type II photoinitiator. These thiols can also be incorporated into a combination of chloro-hexaaryl bisimidazole (Cl-HABI) and a photosensitizer, such as a coumarin or ketocoumarin. Interestingly, a photosensitizer/Cl-HABI/tetrazolethiol derivative system exhibits a higher reactivity than a commonly used photosensitizer/Cl-HABI/N-phenylglycine system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2494–2502, 2007     

Solidification of syndiotactic polystyrene by a continuous cooling transformation approach

Syndiotactic polystyrene (sPS) was solidified from the melt under drastic conditions according to a continuous cooling transformation methodology developed by the authors, which covered a cooling rate range spanning from approximately 0.03 to 3000 °C/s. The samples produced, structurally homogeneous across both their thickness and surface, were analyzed by macroscopic methods, such as density, wide‐angle X‐ray diffraction (WAXD), and microhardness (MH) measurements. The density was strictly related to the phase content, as confirmed by WAXD deconvolution. The peculiar behavior encountered (the density first decreasing and then increasing with the cooling rate) was attributed to the singularity of the phases formed in sPS; that is, one of the crystalline phases (α) was less dense than the amorphous phase, and the latter, in turn, was less dense than the other crystalline phase (β). With an increasing cooling rate, the thermodynamically stable phase (β) disappeared first, and it was followed by the α phase. On the other hand, the MH values remarkably depended on the amount of the β phase, the α‐phase content influencing the mechanical properties only to a minor extent. The behavior of the crystallization kinetics was described through a modified multiphase Kolmogoroff–Avrami–Evans model for nonisothermal crystallization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2688–2699, 2007