Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174     

Role of added Lewis base and alkylaluminum halide on living cationic polymerization of vinyl ether

In the living cationic polymerization of isobutyl vinyl ether (IBVE) by the CH₃CH (OiBu) OCOCH₃ ( 1 )/EtAlCl₂ initiating system in the presence of the added base in hexane at +40°C, the stability of the initiating system 1 /EtAlCl₂, which form initiating species CH₃CH^⊕ (OiBu) derived from 1 , was investigated. In the presence of the Lewis base such as ethyl acetate or 1,4-dioxane, the active species was stable for 300 min even at +40°C in the absence of IBVE, and the living polymers were quantitatively obtained by adding IBVE. However, the active species was partly consumed by side reactions during the standing time for 60 min in the presence of a less basic additive such as ethyl benzoate, and about 50% of the active species was deactivated in the presence of methyl chloroacetate. Consequently, in the case of a less basic additive such as methyl chloroacetate (which was effective for the fast living polymerization), it can be seen that the careful selection of polymerization conditions was required. The living polymerization rate was dependent on the second order of EtAlCl₂ concentration. EtAlCl₂ induced the cleavage of 1 into CH₃CH^⊕ (OiBu) and EtAl^?Cl₂(OCOCH₃), and the reactivity of CH₃CH^⊕ (OiBu) and propagating carbocation may be controlled by EtAl^?Cl₂(OCOCH₃) with the aid of other EtAlCl₂. Et_1.5AlCl_1.5 exists as a bimetallic complex of EtAlCl₂ and Et₂AlCl, and it is expected that the polymers having a bimodal molecular weight distribution will be obtained due to two kinds of counteranions coming from EtAlCl₂ and Et₂AlCl. However, in the cationic polymerization of IBVE by 1 /Et_1.5AlCl_1.5 in the presence of ethyl acetate, the living polymer exhibiting a unimodal and very narrow molecular weight distribution was obtained. Thereby, it was suggested that the counteranions, EtAl^?Cl₂(OCOCH₃) and Et₂Al^?Cl(OCOCH₃), exchange rapidly with each other. © 1994 John Wiley & Sons, Inc.     

Precise synthesis of pH‐responsive copolymers with naphthoic acid side groups via living cationic polymerization

pH‐Responsive homopolymers and copolymers with naphthoic acid side groups were synthesized via base‐assisting living cationic polymerization. To this end, the feasibility of the living cationic polymerization of ethyl 6‐[2‐(vinyloxy)ethoxy]‐2‐naphthoate (EVEN) was first examined using a base‐assisting initiating system. Et_1.5AlCl_1.5 as a Lewis acid catalyst induced the living cationic polymerization of EVEN in the presence of ethyl acetate or 1,4‐dioxane in CH₂Cl₂ at 0 °C. In contrast, the use of naphthoxyethyl vinyl ether (NpOVE), which is a nonsubstituted counterpart, resulted in a poorly controlled polymerization under these conditions. The presence of the carboxy ester was most likely critical in preventing side reactions. A subsequent alkaline hydrolysis of the side‐chain esters quantitatively yielded a carboxy‐containing polymer. Aqueous solutions of this polymer underwent pH‐driven phase separation at pH 7.0. Well‐defined random and block copolymers were also prepared with various functional segments, and their stimuli‐responsive behaviors were investigated in terms of solution transmittance and aggregate size. Block copolymers containing two different pH‐responsive segments formed micelle‐like structures between the two phase‐separated pH values, and dual stimuli‐responsive copolymers containing a pH‐responsive polyacid segment and a thermosensitive segment self‐assembled in the water in response to both the pH and temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5239–5247     

Living cationic polymerization of dihydrofuran and its derivatives

Cationic polymerization of 2,3‐dihydrofuran (DHF) and its derivatives was examined using base‐stabilized initiating systems with various Lewis acids. Living cationic polymerization of DHF was achieved using Et_1.5AlCl_1.5 in toluene in the presence of THF at 0 °C, whereas it has been reported that only less controlled reactions occurred at 0 °C. Monomer‐addition experiments of DHF and the block copolymerization with isobutyl vinyl ether demonstrated the livingness of the DHF polymerization: the number–average molecular weight of the polymers shifted higher with low polydispersity as the polymerization proceeded after the monomer addition. Furthermore, this base‐stabilized cationic polymerization system allowed living polymerization of ethyl 1‐propenyl ether and 4,5‐dihydro‐2‐methylfuran at ?30 and ?78 °C, respectively. In the polymerization of 2,3‐benzofuran, the long‐lived growing species were produced at ?78 °C. The obtained polymers have higher glass transition temperatures compared to poly(acyclic alkyl vinyl ether)s. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4495–4504, 2008     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Living cationic polymerization of vinyl ethers by electrophile/lewis acid initiating systems. VII. Living cationic polymerization of isobutyl vinyl ether by trimethylsilyl halide/zinc halide initiating systems in the presence of p-methoxybenzaldehyde: Effects of halide anions and zinc halides

Trimethylsilyl halides (Me₃SiY), in conjunction with zinc halides (ZnX₂) (Y and X:I, Br, Cl), were employed to investigate the living cationic polymerization of isobutyl vinyl ether (IBVE) in toluene at ?15°C in the presence of p-methoxybenzaldehyde; with the aldehyde and IBVE monomer, Me₃SiY yields an initiating species [Me₃Si? O? CHC₆H₄(OM_e) ? CH₂CH(OiBu) ? Y] that triggers the IBVE polymerization via the activation of its carbon-halogen bond (C? Y) by ZnX₂ into C^δ+…?Y^δ?…?ZnX₂. Living polymerizations occurred with the silyl iodide and bromide irrespective of the type of ZnX₂, either when Y = X (Me₃Sil/Znl₂ and Me₃SiBr/ZnBr₂) or when Y ≠ X (Me₃Sil/ZnBr₂, Me₃SiI/ZnCl₂, and Me₃SiBr/Znl₂). With these five initiating systems, the number-average molecular weights (M?_n) of the polymers increased in proportion to monomer conversion, and the molecular weight distributions (MWDs) of the polymers were narrow (M?_w/M?_n = 1.1?1.2). The Me₃SiCl-based systems (Me₃SiCl/ZnCl₂ and Me₃SiCl/Znl₂), in (Me₃SiCl/Znl₂), in contrast, failed to give perfectly living polymerization; the M?_n indeed increased with conversion, but the MWDs of the polymers were broader (M?_w/M?_n = 1.3?1.5). Thus, the living nature of the polymerizations with Me₃SiY/Znx₂ is primarily determined by the halogen Y in Me₃SiY, which generates the terminal carbon-halogen bond (C? Y) that is activated by ZnX₂ for the propagation via a species C^δ+…?Y^δ?…?ZnX₂. For Y^?, not only the iodide but the bromide anion also is suited for living cationic polymerization. The virtual absence of the effects of X in ZnX₂ implies that the halogen exchange between ZnX₂ and Y from Me₃ SiY at the growing end (C^λ+…?Y^δ?…?ZnX₂ ?C^δ+…?X^δ?…?ZnXY) is absent or negligible.     

Thermosensitive polyalcohols: Synthesis via living cationic polymerization of vinyl ethers with a silyloxy group

Thermosensitive homopolymers and copolymers with hydroxy groups were synthesized via the living cationic polymerization of Si‐containing vinyl ethers. The cationic homopolymerization and copolymerization of five vinyl ethers with silyloxy groups, each with a different spacer length, were examined with a cationogen/Et_1.5AlCl_1.5 initiating system in the presence of an added base. When an appropriate base was added, the living cationic polymerization of Si‐containing monomers became feasible, giving polymers with narrow molecular weight distributions and various block copolymers. Subsequent desilylation gave well‐defined polyalcohols, in both water‐soluble and water‐insoluble forms. One of these polyalcohols, poly(4‐hydroxybutyl vinyl ether), underwent lower‐critical‐solution‐temperature‐type thermally induced phase separation in water at a critical temperature (T_PS) of 42 °C. This phase separation was quite sensitive and reversible on heating and cooling. The phase separation also occurred sensitively with random copolymers of thermosensitive and hydrophilic or hydrophobic units, the T_PS values of which in water could be controlled by the monomer feed ratio. The thermal responsiveness of this polyalcohol unit made it possible to prepare novel thermosensitive block and random copolymers consisting solely of alcohol units. One example prepared in this study was a 20 wt % aqueous solution of a diblock copolymer consisting of thermosensitive poly(4‐hydroxybutyl vinyl ether) and water‐soluble poly(2‐hydroxyethyl vinyl ether) segments, which transformed into a physical gel above 42 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3300–3312, 2003     

Synthesis of various stimuli‐responsive gradient copolymers by living cationic polymerization and their thermally or solvent induced association behavior

Stimuli‐responsive gradient copolymers, composed of various monomers, were synthesized by living cationic polymerization in the presence of base. The monomers included thermosensitive 2‐ethoxyethyl vinyl ether (EOVE) and 2‐methoxyethyl vinyl ether (MOVE), hydrophobic isobutyl vinyl ether (IBVE) and 2‐phenoxyethyl vinyl ether (PhOVE), crystalline octadecyl vinyl ether (ODVE), and hydrophilic 2‐hydroxyethyl vinyl ether (HOVE). The synthesis of gradient copolymers was conducted using a semibatch reaction method. Living cationic polymerization of the first monomer was initiated using a conventional syringe technique, followed by an immediate and continuous addition of a second monomer using a syringe pump at regulated feed rates. This simple method permitted precise control of the sequence distribution of gradient copolymers, even for a pair of monomers with very different relative monomer reactivities. The stimuli‐responsive gradient, block and random copolymers exhibited different self‐association behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6444–6454, 2008     

Rapid living cationic polymerization of vinyl ethers by a single‐molecular initiating system

Initiated by an organic molecule trifluoromethanesulfonimide (HNTf₂) without any Lewis acid or Lewis base stabilizer, cationic polymerization of isobutyl vinyl ether (IBVE) takes place rapidly and the polymerization is proved to be in a controlled/living manner. The conversion of IBVE could easily achieve 99% in seconds. The product poly(isobutyl vinyl ether) is narrowly distributed and its molecular weight increases linearly with time and fits well with the corresponding theoretical value. This single‐molecular initiating system also works well in the living cationic polymerization of ethyl vinyl ether. HNTf₂ is considered playing multiple roles which include initiator, activator, and stabilizer in the polymerization. It is quite different from the hydrogen halide‐catalyzed polymerizations of vinyl ethers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1373‐1377     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. I. New initiating systems based on acetic acid and selection of Lewis acid and basic additive leading to living polymers with low polydispersity

Cationic polymerization of isobutyl vinyl ether (IBVE) with acetic acid (CH₃COOH)/tin tetrahalide (SnX₄: X = Cl, Br, I) initiating systems in toluene solvent at 0°C was investigated, and the reaction conditions for living polymerization of IBVE with the new initiating systems were established. Among these tin tetrahalides, SnBr₄ was found to be the most suitable Lewis acid to obtain living poly(IBVE) with a narrow molecular weight distribution (MWD). The polymerization with the CH₃COOH/SnBr₄ system, however, was accompanied with the formation of a small amount of another polymer fraction of very broad MWD, probably due to the occurrence of an uncontrolled initiation by SnBr₄ coupled with protonic impurity. Addition of 1,4-dioxane (1–1.25 vol %) or 2,6-di-tert-butylpyridine (0.1–0.6mM) to the polymerization mixture completely eliminated the uncontrolled polymer to give only the living polymer with very narrow MWD (M _w/M _n ≤ 1.1; M _w, weight-average molecular weight; M _n, number-average molecular weight). The M _n of the polymers increased in direct proportion to monomer conversion, continued to increase upon sequential addition of a fresh monomer feed, and was in good agreement with the calculated values assuming that one CH₃COOH molecule formed one polymer chain. Along with these results, kinetic study and direct ¹H-NMR observation of the living polymerization indicated that CH₃COOH and SnBr₄ act as so-called “initiator” and “activator”, respectively, and the living polymerization proceeds via an activation of the acetate dormant species. The basic additives such as 1,4-dioxane and 2,6-di-tert-butylpyridine would serve mainly as a “suppressor” of the uncontrolled initiation by SnBr₄. The polymers produced after quenching the living polymerization with methanol possessed the acetate dormant terminal and they induced living polymerization of IBVE in conjunction with SnBr₄ in the presence of 1,4-dioxane. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3173–3185, 1998     

Living cationic polymerization of azobenzene‐containing vinyl ether and its photoresponsive behavior

The living cationic polymerization of 4‐[2‐(vinyloxy)ethoxy]azobenzene (AzoVE) was achieved with various Lewis acids in the presence of an ester as an added base. When Et_1.5AlCl_1.5 was used as a catalyst, the living polymerization system was controllable by UV irradiation as a result of cis and trans isomerization of the azobenzene side groups. Furthermore, an initiating system consisting of SnCl₄ and EtAlCl₂ realized fast living polymerization of AzoVE. The polymerization rate of this system was 3 orders of magnitude faster than that obtained with Et_1.5AlCl_1.5. Poly(4‐[2‐(vinyloxy)ethoxy]azobenzene) was soluble in a diethyl ether/hexane mixture at 25 °C but became insoluble upon irradiation with UV light. This phase‐transition behavior was sensitive and reversible upon irradiation with UV or visible light and reflected the change in polarity occurring with cis and trans isomerization of the azobenzene side groups in the polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5138–5146, 2005     

Antithetic function of alcohol in living cationic polymerization: From terminator/inhibitor to useful initiator

We employed alcohols as initiators for living cationic polymerization of vinyl ethers and p‐methoxystyrene, coupled with tolerant Lewis acid, borontrifluoride etherate (BF₃OEt₂), although they were known to be poisonous reagent to bring about chain‐breaking such as chain transfer/termination rather than such beneficial one for propagation and polymerization‐control. As well known, without assistance of additive, ill‐defined polymers with broad molecular weight distributions (MWDs) were produced. Even addition of conventional oxygen‐based bases, for example, ethyl acetate (AcOEt), 1,4‐dioxane (DO), tetrahydrofran (THF), and diethyl ether (Et₂O) was less efficient in this system to control molecular weights and MWDs (M_w/M_n > 2.0). In contrast, by addition of dimethyl sulfide (Me₂S), MWDs of the resultant polymers became much narrower (M_w/M_n < 1.23) and the number‐average molecular weight (M_n) increased in direct proportion to monomer conversion in agreement with the calculated values assuming that one alcohol molecule generates one polymer chain. Studying changed feed‐ratio of alcohol to monomer and structural analyses with NMR and MALDI‐TOF‐MS indicated that quantitative initiation from alcohol giving alkoxide counteranion. This system opens a new way to use a variety of alcohols as initiators, which would allow us to design variety of structures and functions of counteranion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4194–4201, 2009     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. II. Living nature of growing end and side reactions

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the HCl–vinyl ether adduct/SnCl₄/n‐Bu₄NCl initiating system induced living cationic polymerization of isobutyl vinyl ether in CH₂Cl₂ at ?78 °C, that is, the well‐resolved spectra demonstrated that the produced polymers consist of only one series of polymers carrying one initiator fragment at the α end and one methoxy group originated from quenching with methanol at the ω end. The polymer molecular weight as well as the terminal structure were unchanged even when the reaction mixtures were kept unquenched at ?78 °C for an interval of more than five times longer than the reaction period after complete consumption of monomer, which indicates the long lifetime of the living end even under such starved conditions. In contrast, the polymers obtained at a higher temperature, ?15 °C, showed an additional minor series of polymers formed via proton initiation, originating from adventitious water. Under the starved conditions, other side reactions occurred to generate minor series of polymers with an aldehyde ω end or a diisobutyl acetal ω end. Rather surprisingly, however, unsaturated C?C end groups were not detected, which means the absence of β‐proton elimination under these conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1249–1257, 2001     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001