Poly(n‐alkylsilsesquioxane)s: Synthesis,characterization, and modification with poly(dimethylsiloxane)

Self‐supported translucent films constituted of poly(n‐octylsilsesquioxane) or poly(n‐dodecylsilsesquioxane) were obtained from the hydrolysis and condensation of n‐octyltriethoxysilane (OTES) or n‐dodecyltriethoxysilane (DTES), respectively. Dense films were obtained in the absence of organic solvents, with dibutyltin diacetate as catalyst. These films exhibited good optical transparency and thermal stability. The incorporation of oligomeric dimethylsiloxane units (D^Me,Me) in these materials, derived from silanol‐terminated poly(dimethylsiloxane) (PDMS) or 1,1,3,3‐tetramethyl‐1,3‐diethoxydisiloxane (TMDES), was carried out during the hydrolysis and condensation of OTES and DTES and was confirmed by solid‐state ²⁹Si NMR. Poly(n‐octylsilsesquioxane) showed a glass‐transition temperature at ?65 °C, due to the increase in the free volume, promoted by the bulky n‐octyl groups. The differential scanning calorimetric (DSC) curves of the polymer derived from DTES were characterized by first‐order transitions at temperatures ranging from ?15.8 to ?0.7 °C. Further studies of these networks by low‐temperature XRD evidenced narrowing of the diffraction halos suggesting a partial order–disorder transition for these materials at lower temperatures. Good thermal stability up to 350 °C and the solvent‐free production process make these polymers potential candidates for the development of self‐supported hydrophobic protective coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1220–1229, 2010     

Library synthesis and characterization of 3‐aminopropyl‐terminated poly(dimethylsiloxane)s and poly(ϵ‐caprolactone)‐b‐poly(dimethylsiloxane)s

Libraries of 3‐aminopropyl‐terminated poly(dimethylsiloxane) (APT–PDMS) and poly(?‐caprolactone)–poly(dimethylsiloxane)–poly(?‐caprolactone) (PCL—PDMS–PCL) triblock copolymers were synthesized. Preliminary experiments were carried out to select an appropriate catalyst and route for the poly(dimethylsiloxane) synthesis, and trial experiments were conducted to verify the successful synthesis of the intended polymer compositions. Then, a series of APT–PDMS oligomers were synthesized with an automated combinatorial high‐throughput synthesis system to cover a molecular weight range of 2500–50,000 g/mol. Trial PCL—PDMS–PCL triblock copolymers were synthesized with the automated reactor system and characterized in detail with rapid gel permeation chromatography, high‐throughput Fourier transform infrared, nuclear magnetic resonance, and differential scanning calorimetry. Finally, two library synthesis experiments were carried out in which the lengths of both the poly(dimethylsiloxane) and poly(?‐caprolactone) blocks in the PCL—PDMS–PCL triblock copolymers were varied. The results obtained from these experiments demonstrated that it was possible to synthesize libraries of well‐defined APT–PDMS oligomers and PCL—PDMS–PCL triblock copolymers with an automated high‐throughput system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4880–4894, 2006     

Synthesis and thermal crosslinking of benzophenone‐modified poly(dimethylsiloxane)s

Dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the regiospecific anti‐Markovnikov addition of an ortho C? H bond of benzophenone across the C? C double bonds of α,ω‐bis(trimethylsilyloxy)copoly(dimethylsiloxane/vinylmethylsiloxane) (99:1), α,ω‐bis(vinyldimethylsilyloxy)poly(dimethylsiloxane), and 1,3‐divinyltetramethyldisiloxane to yield α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(2′‐benzophenonyl)ethylmethylsiloxane]), α,ω‐bis[2‐(2′‐benzophenonyl)ethyldimethylsilyloxy]poly(dimethylsiloxane), and 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane, respectively. These materials have been characterized with ¹H, ¹³C, and ²⁹Si NMR and IR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography. The thermal stability of the polymers has been measured by thermogravimetric analysis, and their glass‐transition temperatures (T_g's) have been determined by differential scanning calorimetry. The molecular weight distribution, thermal stability, and T_g's of the modified polysiloxanes are similar to those of the precursor polymers. The molecular weights of these materials can be significantly increased via heating to 300 °C for 1 h. This may be due to crosslinking, by pyrocondensation, of pendant anthracene groups, which are produced by the pyrolysis of the attached ortho‐alkyl benzophenones. UV spectroscopy of the pyrolysate of 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane has confirmed the presence of pendant anthracene groups. Thermal crosslinking by the pyrocondensation of pendant anthracene groups has been verified by the pyrolysis of α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(9′‐anthracenyl)ethylmethylsiloxane] (97:3). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5514–5522, 2004     

Preparation of three‐dimensional poly(dimethylsiloxane) (PDMS) with movable cross‐linking

A pentamethylcyclotrisiloxane moiety was introduced into cyclic polystyrene (cPSt) and cyclic PDMS (cPDMS) to obtain noncovalent cross‐linking agents, D₃‐cPSt and D₃‐cPDMS, respectively. Anionic ring‐opening polymerization of octamethylcyclotetrasiloxane (D₄) in nitrobenzene was carried out in the presence of D₃‐cPSt to obtain a cloudy white PDMS gel as a precipitation. On the other hand, bulk copolymerization of D₃‐cPDMS with D₄ proceeded in a homogeneous state to give a colorless transparent PDMS gel in high yield. The formation of mechanically linked PDMS with movable cross‐linking was indicated by control experiment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5882–5890, 2009     

Synthesis and characterization of model 3‐miktoarm star copolymers of poly(dimethylsiloxane) and poly(2‐vinylpyridine)

3‐Miktoarm star copolymers, 3μ‐D₂V, with two poly(dimethylsiloxane) (PDMS) and one poly(2‐vinylpyridine) (P2VP) arm, were synthesized by using anionic polymerization–high vacuum techniques and (chloromethylphenylethyl)methyl dichlorosilane, heterofunctional linking agent, with two SiCl groups and one CH₂Cl group. The synthetic strategy involves the selective reaction of the two ? SiCl groups with PDMSOLi living chains, followed by reaction of the remaining chloromethyl group with P2VPLi. Combined molecular characterization results (size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy) revealed a high degree of structural and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 614–619, 2006     

Synthesis and characterization of model diblock copolymers of poly(dimethylsiloxane) with poly(1,4‐butadiene) or poly(ethylene)

Model diblock copolymers of poly(1,4‐butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS, were synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene and hexamethylciclotrisiloxane (D₃) in the presence of sec‐BuLi. By homogeneous hydrogenation of PB‐b‐PDMS, the corresponding poly(ethylene) and poly(dimethylsiloxane) block copolymers, PE‐b‐PDMS, were obtained. The synthesized block copolymers were characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size‐exclusion chromatography (SEC), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and rheology. SEC combined with ¹H NMR analysis indicates that the polydispersity index of the samples (M_w/M_n) is low, and that the chemical composition of the copolymers varies from low to medium PDMS content. According to DSC and TGA experiments, the thermal stability of these block copolymers depends on the PDMS content, whereas TEM analysis reveals ordered arrangements of the microphases. The morphologies observed vary from spherical and cylindrical to lamellar domains. This ordered state (even at high temperatures) was further confirmed by small‐amplitude oscillatory shear flow tests. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1579–1590, 2006     

Fabrication and properties of poly(propylene carbonate)/calcium carbonate composites

Composites of poly(propylene carbonate) (PPC) reinforced with micrometric and nanometric calcium carbonate particles were prepared via melt mixing followed by compression molding. The morphology and mechanical and thermal behaviors of the composites were investigated. Static tensile tests showed that the tensile strength, stiffness, and ductility of the composites tended to increase with increasing contents of micrometric calcium carbonate particles. This improvement in the tensile properties was attributed to good interfacial adhesion between the fillers and matrix, as evidenced by scanning electron microscopy examination. However, because of the agglomeration of calcium carbonate nanoparticles during blending, those composites with nanoparticles exhibited the lowest tensile strength. Thermogravimetric measurements revealed that the incorporation of calcium carbonate into PPC resulted in a slight improvement in its thermooxidative stability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1806–1813, 2003     

UV‐curable bismaleimides containing poly(dimethylsiloxane): Use as hydrophobic agent

The synthesis and characterization of poly(dimethylsiloxanes) bearing maleimides end‐groups (PDMSM) were carried out through imidization of maleic anhydride with three poly(dimethylsiloxanes) diamines of different molecular weights. Self‐photopolymerization of PDMSM was studied by Real‐Time Fourier Transform infrared spectroscopy (RT‐FTIR) and was possible even without photoinitiator (Darocur 1173). The reaction was found to proceed within seconds upon exposure to ultraviolet (UV) radiation to generate highly crosslinked polymer networks. The results indicated that these polymerizations were less sensitive to oxygen inhibition than the radical processes carried out on conventional UV‐curable acrylate resins. The thermal and mechanical properties of these resulting materials were studied starting from PDMS precursors with different molecular weights. These materials exhibit a low glass transition temperature (相似文献   

Elastic behavior of bimodal poly(dimethylsiloxane) networks

The rubberlike elastic behavior of bimodal poly(dimethylsiloxane) (PDMS) networks was investigated by the Monte Carlo simulation method and enumeration calculation method on the basis of the rotational‐isomeric‐state (RIS) model. These bimodal PDMS networks consist of short chains (chain length from 10 to 20) as well as long chains (chain length equal to 150). For long PDMS chains, through generating many PDMS conformations in the equilibrium state using the Monte Carlo simulation method we can obtain the average Helmholtz free energy and the average energy. For short PDMS chains with chain lengths from 10 to 20, as the total number of conformations is only from 6.56 × 10³ to 3.87 × 10⁸, we adopt the enumeration calculation method. The deformation is partitioned nonaffinely between the long and short chains, and this partitioning can be determined by requiring the free energy of the deformed network to be minimized. Chain dimensions and thermodynamic statistical properties of bimodal PDMS networks at various elongation ratios are discussed. We find that elastic force f increases with elongation ratio λ; the energy contribution f_u to elastic force is significant, and the ratio of ranges from 0.15 to 0.36 at T = 343 K. In the meantime, elastic force f increases with the average energy 〈U〉. The energy change in the process of tensile elongation is taken over, which has been ignored in previous theories. Our calculations may provide some insights into the phenomena of rubberlike elasticity of bimodal networks. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 105–114, 2002     

Segmental dynamics in poly(ε‐caprolactone)/poly(L‐lactide) copolymer networks

Poly(ε‐caprolactone) (PCL) and poly(lactic acid) (PLA) networks were prepared from macromonomer diols functionalized with methacrylic anhydride, which allows one to get self‐crosslinkable polymers. Besides, both macromonomers were copolymerized to get copolymer networks with different compositions (namely, PCL/PLA: 0/100, 70/30, 50/50, 30/70, 100/0). Dielectric and calorimetric experiments allow one to conclude the microphase separation of the system: one phase made of pure PCL domains while the second one consists of caprolactone units, which somehow plasticize PLA and moves its main relaxation (glass transition) to lower temperatures. The effect of crosslinking PLA on the dynamics of the system was further investigated by comparing with the dynamics for linear PLA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 183–193, 2009     

Synthesis,characterization, and properties of vinyl‐terminated copolysiloxanes containing trifluoropropyl and 4‐trifluoromethylphenyl groups

Novel fluorine containing siloxane monomer, namely, 4‐trifluoromethylphenylmethyl cyclosiloxane ( PF3 ) and mixed cyclosiloxane including both 4‐trifluoromethylphenylmethyl siloxane ( P ) unit and trifluoropropyl siloxane ( F ) unit were successfully synthesized in this study. Furthermore, their series including vinyl‐terminated copolymers with different compositions were synthesized. The microstructures of copolymers were investigated by ¹H NMR, ²⁹Si NMR, ¹⁹F NMR, Fourier transform infrared spectroscopy, and differential scanning calorimetry (DSC). The results of characterizations confirmed that the copolymers exhibited random microstructure. Moreover, the analysis of the result of DSC also revealed that the copolymers had a low glass transition temperature. The thermogravimetric analysis indicated that poly(4‐trifluoromethylphenylmethyl)siloxane ( PPF3 ) exhibited higher thermal stability than conventional fluorosilicones rubber ( FSR ). The dynamic mechanical analysis showed that the damping factors of these copolymers were greater than 0.3 in a wide range of temperature. The mass swelling ratios were less than 5.5% when the samples were immersed in No. 3 jet fuel for a month. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1023–1031     

Mechanical and thermo‐mechanical studies of double networks based on thermoplastic elastomers

A new approach to prepare and characterize double network elastomeric systems was investigated. A styrene‐ethylene‐co‐butylene‐styrene (SEBS) triblock copolymer system containing physical crosslinks was used to achieve a double network by additional crosslinking using ultra‐violet (UV) light. An ethylene–propylene–diene monomer (EPDM) terpolymer system containing chemical crosslinks was used to achieve a conventional double network using UV crosslinking. Properties from conventional monotonic tensile tests, dynamic mechanical analysis, and thermomechanical properties were investigated. These double network elastomers show a transition between competitive and collaborative behavior in their mechanical properties and lower coefficients of thermal expansion arising from a competition of the networks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 778–789, 2010     

Ionic organic/inorganic materials. II. New linear and crosslinked poly(ethylene oxide)‐based ionomers by quaternization with chloroalkyl‐functionalized siloxanes

Siloxane‐modified cationic polyelectrolytes were synthesized through the quaternization reaction of a poly(ethylene glycol)‐based polymer containing tertiary amine groups in the chain with chloroalkyl‐functionalized siloxanes. Linear or crosslinked structures were obtained, depending on the functionality of the siloxane: a chloroalkyl‐monofunctionalized or ‐polyfunctionalized siloxane was used. The reaction occurred in solution with n‐propanol as a solvent and NaI as a catalyst. All products were characterized with elemental analysis and IR and ¹H NMR spectrometry. Viscometric measurements of the linear polymer in dilute aqueous solutions revealed typical polyelectrolyte behavior. The swelling capacities in various solvents of the crosslinked structures were determined. The thermal stability of the crosslinked cationic structures obtained with a polyfunctional siloxane as a quaternization agent was much higher than that of the parent polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3720–3728, 2004     

Preparation and characterization of novel transparent plasticized poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) gel

Transparent plasticized gels with good mechanical, optical, and dielectric properties have important applications in various fields. We prepared a new gel using a poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) (PBT‐co‐PAGT) copolymer and a plasticizer, dibutyl adipate (DBA). This method improved the polymer crystallinity, and suppressed particle formation in cast‐films when the polymer was dissolved in 1,1,1,3,3,3‐hexafluoro‐2‐propanol, followed by solvent evaporation, and enabled uniform swelling of the polymer network by the plasticizer to form a transparent and flexible gel. The dielectric constants of the developed PBT‐co‐PAGT/DBA gels are much higher than those of PBT‐co‐PAGT films at low frequency. We believe that these PBT‐co‐PAGT/DBA gels could be used as photovoltaic, dielectric, and actuator materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 829–832     

Poly(dimethylsiloxane) networks modified with poly(phenylsilsesquioxane)s: Synthesis, structural characterisation and evaluation of the thermal stability and gas permeability

Self-supported translucent films constituted of semi-inorganic polymeric materials were prepared by sol-gel process from poly(phenylsilsesquioxane) (PPSQ) and poly(dimethylsiloxane) (PDMS), modified by diphenylsilanediol (DPS), phenyltriethoxysilane (PTES) and/or tetraethoxysilane (TEOS). These materials were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA). Permeability to N₂, O₂, CH₄ and CO₂ and selectivity for a specific gas pair were investigated using the time-lag method. In the gas separation process high permeability and selectivity coefficients were observed, particularly for the membrane containing DPS and PTES as additives, which presented potential applications in the separation of CO₂/CH₄ and CO₂/N₂. The materials also showed good thermal stability, which could be correlated to the relative amounts between di-functional (D), tri-functional (T) and tetra-functional (Q) silicon units.     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

Preparation and characterization of nano‐platelet‐like hydroxyapatite/gelatin nanocomposites

Nature has succeeded in creating numerous bionanocomposites such as bones and teeth consisting of nano‐platelets and biopolymers. Understanding of the mechanisms of formation and of the relation between structure and properties is vital for development of new materials for biomedical and engineering applications. In this work, varying contents of nano‐platelet‐like hydroxyapatite (HAp) has been used to reinforce gelatin (Gel) to produce nanocomposites. The prepared HAp/Gel nanocomposites were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric (TG/DTG) analyses. XRD, TEM, and FTIR results confirm the synthesis of intercalated and exfoliated nanostructures depending on the amount of gelatin. TG results reveal that the intercalated HAp/gelatin nanocomposites show improved thermal properties as compared to pristine gelatin. The results reported here can be expanded to other HAp–polymer systems, thus paving a new way of designing and fabricating biomemitic nanocomposites for future engineering and particularly for biomedical applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetics of the Thermal and Thermo‐Oxidative Degradation of a Polystyrene–Clay Nanocomposite

Summary: Thermogravimetry and differential scanning calorimetry have been used to study the thermal and thermo‐oxidative degradation of polystyrene (PS) and a PS–clay nanocomposite. An advanced isoconversional method has been applied for kinetic analysis. Introduction of the clay phase increases the activation energy and affects the total heat of degradation, which suggests a change in the reaction mechanism. The obtained kinetic data permit a comparative assessment of the fire resistance of the studied materials.

The change in activation energy for the degradation of PS and the PS–clay nanocomposite with the extent of polymer conversion.