Comparison of glass transition and interpretation on miscibility in blends of amorphous poly(vinyl methyl ether) with highly crystallizable versus less‐crystallizable polyesters

Various phase behavior of blends of poly(vinyl ether)s with polyesters of two types (highly crystalline and less crystalline with different main‐chains) were examined using differential scanning calorimetry (DSC) and optical microscopy (OM). Effects of varying the main‐chain polarity of the constituent polyesters on the phase behavior of the blends were analyzed. Miscibility in PVME/polyester blends was found only in polyesters with backbone CH₂/CO ratio = 3.5 to 7.0). T_g‐composition relationships for blends of PVME with highly crystalline polyesters (PBA, PHS) were found to differ significantly from those for PVME blends with less‐crystalline polyesters (PTA, PEAz). Crystallinity of highly crystalline polyester constituents in blends caused significant asymmetry in the T_g‐composition relationships, and induced positive deviation of blends' T_g above linearity; on the other hand, blends of PVME with less crystalline polyesters exhibit typical Fox or Gordon‐Taylor types of relationships. The χ parameters for the miscible blends were found to range from ?0.17 to ?0.33, reflecting generally weak interactions. Phase behavior was analyzed and compared among blends of PVME with rapidly crystallizing vs. less‐crystallizing polyesters, respectively. Effects of polyesters' crystallinity and structures on phase behavior of PVME/polyester blends are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2899–2911, 2007     

Application of Ultrasonic Attenuation Measurements in the Studies on Macromolecular Conformational Behaviors

——Phase Behavior of the Aqueous Solution of Poly(vinyl methyl ether) Sensitive to Temperature and the Modification of the Behavior by Using Poly(acrylic acid) The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sensitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be successfully used for the qualitative studies of polymer conformations and complexation between polymers.     

Application of Ultrasonic Attenuation Measurements in the Studies on Macromolecular Conformational Behaviors——Phase Behavior of the Aqueous Solution of Poly(vinyl methyl ether) Sensitive to Temperature and the Modification of the Behavior by Using Pol

Introduction Studies on the conformational and aggregation be-haviors of macromolecules in aqueous solution and at solid/liquid interfaces have been highlighted in colloid and interface science since the early 1990s.1-3 It was mentioned in the first part of this series of studies that development of new methods, which are characterized by being in time and non-destructive and can be used for monitoring the conformational and aggregation be-havior of macromolecules, is of critical importance fo…     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

聚甲基丙烯酸甲酯与聚醋酸乙烯酯共混的红外光谱研究

用红外光谱(FTIR)研究了聚甲基丙烯酸甲酯(PMMA)与聚醋酸乙烯酯(PVAc)共混体系相容性,在160℃以上共混体系发生相分离;分相体系与非分相体系的FTIR谱明显不同;共混体系的FTIR谱不能从两统组分红外光谱简单加和得到;结果表明大分子构象发生了变化,PMMA/PVAc体系相容可能是大分子构象熵变所致。     

Effect of blend composition on diffusivity and solubility of small molecules in polystyrene/poly(vinyl methyl ether) blends

The capillary column inverse gas chromatography technique was used to determine diffusivity and solubility data for several solvents in polymer blends composed of polystyrene and poly(vinyl methyl ether) (PVME). Diffusivity behaved as expected, increasing as the concentration of PVME increased in the blend. Knowing only the free‐volume parameters for the pure polymers, the free‐volume theory was successfully applied to predict the dependence of the diffusion coefficients on the blend composition. Transport in blends above the glass transition temperature is controlled by free volume, and the effect of concentration fluctuations is minimal at the temperatures studied. Experimental data show an increase in the partition coefficient of some solvents in the blends with respect to the pure polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2071–2082, 2007     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

Miscibility of poly(vinyl methyl ether) and poly(styrene-co-2-vinylnaphthalene) blends by FT-IR spectroscopy and Tg measurements

Miscibility of blends consisting of poly(vinyl methyl ether) (PVME) and poly(styreneco-2-vinylnaphthalene) [P(S-co-2VN)] was investigated by means of Fourier transform infrared (FT-IR) spectroscopy and thermal analysis. Copolymers containing 21, 51, and 84 wt % of styrene were synthesized by radical polymerization. Based on optical clarity and glass transition temperatures, it was shown that the miscibility in P(S-co-2VN)/PVME blends is largely affected by compositions of the copolymers as well as concentrations of the blend. From the FT-IR results, the relative intensity at 1100 cm^?1 peak of COCH₃ band of PVME and the position of naphthyl ring of 2VN were sensitive to the miscibility of the blends. It was observed that blends of PVME with P(S-co-2VN) of 84 wt % styrene or P(S-co-2VN) of 51 wt % styrene are miscible over the entire concentration ranges of the blends. Blends of PVME with P(S-co-2VN) containing 21 wt % of styrene are immiscible below 65 wt % PVME. In the miscible P(S-co-2VN)/PVME blends, there was observed a large shift in the naphthyl frequency at a characteristic wavelength of 748 cm^?1. © 1993 John Wiley & Sons, Inc.     

An intimate polycarbonate/poly(methyl methacrylate)/poly(vinyl acetate) ternary blend via coalescence from their common inclusion compound with γ‐cyclodextrin

In this study, we successfully report an intimate ternary blend system of polycarbonate (PC)/poly(methyl methacrylate) (PMMA)/poly(vinyl acetate) (PVAc) obtained by the simultaneous coalescence of the three guest polymers from their common γ‐cyclodextrin (γ‐CD) inclusion compound (IC). The thermal transitions and the homogeneity of the coalesced ternary blend were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The observation of a single, common glass transition strongly suggests the presence of a homogeneous amorphous phase in the coalesced ternary polymer blend. This was further substantiated by solid‐state ¹³C NMR observation of the T_1ρ(¹H)s for each of the blend components. For comparison, ternary blends of PC/PMMA/PVAc were also prepared by traditional coprecipitation and solution casting methods. TGA data showed a thermal stability for the coalesced ternary blend that was improved over the coprecipitated blend, which was phase‐segregated. The presence of possible interactions between the three polymer components was investigated by infrared spectroscopy (FTIR). The analysis indicates that the ternary blend of these polymers achieved by coalescence from their common γ‐CD–IC results in a homogeneous polymer blend, possibly with improved properties, whereas coprecipitation and solution cast methods produced phase separated polymer blends. It was also found that control of the component polymer molar ratios plays a key role in the miscibility of their coalesced ternary blends. Coalescence of two or more normally immiscible polymers from their common CD–ICs appears to be a general method for obtaining well‐mixed, intimate blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4182–4194, 2004     

THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride)—poly(methyl methacrylate) and chlorinated poly(vinyl chloride)—poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.     

Poly(N-phenyl-2-hydroxytrimethylene amine): Its blends with poly(ϵ-caprolactone) and water-soluble polyethers

A new polymer with pendant hydroxyl groups, namely, poly(N-phenyl-2-hydroxytrime-thylene amine) (PHA), was synthesized by a direct condensation polymerization of aniline and epichlorohydrin in an alkaline medium. The new polymer is amorphous with a glass transition temperature (T_g) of 70°C. Blends of PHA with poly(ϵ-caprolactone) (PCL), as well as with two water-soluble polyethers, poly(ethylene oxide) (PEO) and poly(vinyl methyl ether) (PVME), were prepared by casting from a common solvent. It was found that all the three blends were miscible and showed a single, composition dependent glass transition temperature (T_g). FTIR studies revealed that PHA can form hydrogen bonds with PCL, PEO, and PVME, which are driving forces for the miscibility of the blends. © 1997 John Wiley & Sons, Inc.     

聚己内酯在聚己内酯/聚乙烯基甲基醚共混体系中的结晶研究

通过示差扫描量热(DSC)、广角X射线衍射(WAXD)、小角X射线散射(SAXS)研究了聚己内酯(PCL)/聚乙烯基甲基醚(PVME)共混体系中PCL的结晶行为.研究结果表明,共混聚合物中PCL的结晶度几乎不随体系的组成而发生变化.共混物中PVME的存在没有改变PCL的晶体结构,但是随着PVME含量的增加,片晶之间的距离则大,这主要是由于非晶层增厚引起的.     

High-temperature fourier transform infrared study of polystyrene/poly(vinyl methyl ether) blends

Fourier transform infrared (FTIR) studies of polystyrene (PS)/poly(vinyl methyl ether) (PVME) miscible blends as a function of temperature are presented. Below the lower critical solution temperature (LCST) little change is observed in the interaction spectrum obtained via digital subtraction techniques. Once above the LCST, the magnitude of the interaction spectrum decreases as a result of the phase separation process. Comparison of the behavior of the ether C? O stretching band in the reference PVME and in the blends has yielded a lower limit estimate for the interaction energy of about 0.15 kcal/mol.     

Shear flow effect on phase behavior and morphology in polymer blends

The effect of simple shear flow on the phase behavior and morphology was investigated for both polystyrene/poly(vinyl methyl ether) (PS/PVME) and poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) (PMMA /SAN‐29.5) blends, which have LCST (lower critical solution temperature)‐type phase diagram. The measurements were carried out using a special shear apparatus of two parallel glass plates type. The PS/PVME blends showed shear‐induced demixing and shear‐induced mixing at low and high shear rate values, respectively. In addition, the rotation speed and the sample thickness were found to have a pronounced effect on the phase behavior under shear flow. On the‐other hand, PMMA/SAN blend showed only shear‐induced mixing and the magnitudes of the elevation of the cloud points were found to be composition and molecular weight dependent. The morphology of the PMMA/SAN=75/25 blend indicated that shear‐induced mixing occurred at a critical shear rate value, below which the two phases were highly oriented and elongated in the flow direction.     

Fourier-transform infrared study of polystyrene/poly(vinyl methyl ether) blends

Fourier-transform infrared (FTIR) studies of polystyrene (PS)/poly(vinyl methyl ether) (PVME) blends are presented. Both compatible (one-phase) and phase-separated blends were studied. In the case of compatible PS/PVME blends, there is strong evidence for molecular interactions. The interaction spectrum was obtained by digital subtraction techniques. In contrast, no interaction is detected for the phase-separated blends. In view of these results, molecular interactions must play a role in the compatibility of the two polymers. The merits of factor analysis and least-squares fit methods, as pertaining to our data, are also discussed.     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Phase Separation in Aqueous Polymer Solutions as Studied by NMR Methods

Some possibilities of ¹H NMR spectroscopy in investigations of structural-dynamic changes and polymer-solvent interactions during the temperature-induced phase transitions in aqueous polymer solutions are described. Results obtained recently on D₂O solutions of poly(vinyl methyl ether) (PVME), poly(N-isopropylmethacrylamide) (PIPMAm), negatively charged copolymers of N-isopropylmethacrylamide and sodium methacrylate, and PIPMAm/PVME mixtures are discussed. A markedly different rate of dehydration process in dilute solutions on the one hand, and in semidilute and concentrated solutions on the other hand, was revealed from ¹H spin-spin relaxation measurements.     

Blends of poly(vinyl methyl ether) with styrenic copolymers

Blends of poly(vinyl methyl ether) (PVME) with styrene/acrylonitrile (SAN), with styrene/maleic anhydride (SMA), and with styrene/acrylic acid (SAA) copolymers were examined for glass transition and lower critical solution temperature behavior. These copolymers were found to be completely miscible with PVME at levels of 3% or less of AA; below 10–11% AN, and below 15% MA (w%). Small amounts of the comonomers raised the temperature at which blends with PVME undergo phase separation on heating. This effect was greatest in the order AA > AN > MA. An interpretation of these results is given in terms of recent theories for homopolymer-copolymer blends, and the extent to which solubility parameter theory can be useful is considered.     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

Synthesis and utility of ethylene (meth)acrylate copolymers prepared by a tandem ring-opening polymerization hydrogenation strategy

One new and one established functional cyclooctene were prepared and (co)polymerized using ring-opening metathesis polymerization. The resulting polymers were hydrogenated to yield the corresponding functional polyolefins that were structurally equivalent to copolymers of ethylene and either methyl methacrylate, t-butyl acrylate, or acrylic acid after deprotection. The copolymers that incorporate methyl methacrylate into the backbone were used as compatibilizers for poly(methyl methacrylate)/polyethylene blends. The copolymers that incorporate t-butyl acrylate into the backbone yielded elastomers that could be thermally crosslinked. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3117–3126