Synthesis,characterization, and electroluminescence of polyfluorene copolymers containing T‐shaped isophorone derivatives

We have successfully synthesized a series of new fluorene‐based copolymers, poly[(9,9‐bis(4‐octyloxy‐phenyl)fluorene‐2,7‐diyl)‐co‐[2(3{2[4(2{4[bis(bromophenyl‐4yl) amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile] (PFTBMs), with varying molar ratios of the low‐energy band gap comonomer, 2(3{2[4(2{4[bis(4‐bromophenyl)amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile (BTBM). To prepare BTBM (which has a T‐shaped structure) from triphenylamine, dialkoxy phenyl, and isophorone, we introduced three individual segments of an isophorone derivative containing two cyanide groups at the carbonyl position, a dialkoxy phenyl group for increased solubility, and a triphenyl amine for effective charge transfer. Furthermore, we introduced vinyl linkages between each segment to increase the length of π‐conjugation. The synthesized polyfluorene copolymers with the BTBM, PFTBMs, were synthesized via palladium‐catalyzed Suzuki coupling reactions. The photoluminescence emission spectra of the synthesized polymers in solution did not show significant energy transfer from PBOPF segments to the BTBM units. Light‐emitting devices based on these polymers were fabricated with an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/polymers/Balq/LiF/Al configuration. Examination of the electroluminescence emission of the synthesized polymers showed that the maximum wavelength shifted continuously toward long wavelengths with as the number of BTBM units in the polymer main chain was increased. In particular, a device using PFTBM 05 exhibited a maximum brightness of 510 cd/m² and a maximum current efficiency of 0.57 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 82–90, 2010     

Synthesis and characterization of photocrosslinkable,side‐chain,second‐order nonlinear optical poly(ester imide)s with great film‐forming ability and long‐term dipole orientation stability

A series of photocrosslinkable, side‐chain, second‐order nonlinear optical (NLO) poly(ester imide)s (PEIs) based on a chromophore‐containing dianhydride, 2,2′‐{4‐[(4‐nitrophenyl)‐azo]phenyl}iminobis(ethyl benzene‐1,2‐dicarboxylic acid anhydride‐4‐carboxylate), benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride, and 4,4′‐diamino‐3,3′‐dimethyl diphenylmethane were prepared. The resulting PEIs exhibited many useful physical characteristics, such as good organosolubility, excellent film‐forming properties, high glass‐transition temperatures (186–229 °C), and high thermal decomposition temperatures. The electrooptic coefficient value of PEI3 at 650 nm was 11.5 pm/V, and high long‐term stability of the NLO chromophore alignment in the poled PEI3 film at 120 °C was observed. The temporal stability of the dipole orientation at 150 °C was further enhanced by ultraviolet irradiation because of photocrosslinking. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 303–312, 2003     

Electroluminescent copolymers based on dihexylfluorene and 2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile units

A series of statistical copolymers (poly[(9,9‐di‐n‐hexylfluorene)‐co‐2‐{2,6‐bis‐[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were synthesized by the Suzuki coupling reaction. The copolymers showed absorption bands at 379 and 483–489 nm, which were attributed to the oligofluorene segments and the segments containing 2‐[2,6‐bis(2‐{4‐[(4‐bromophenyl)phenylamino]phenyl}vinyl)pyran‐4‐ylidene]malononitrile ( 3 ), respectively. The absorption band around 483–489 nm increased with the feed ratio of 3 . The photoluminescence (PL) spectra of the copolymers showed emission bands at 420 and 573–620 nm. As the feed ratio of 3 increased, the PL emission in the longer wavelength region redshifted, and the intensity increased as well. The electroluminescence (EL) spectrum of the copolymers showed a very weak emission at 420 nm. The PL and EL emission colors redshifted dramatically with the increase in the feed ratio of 3 . The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the model compound (2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were determined to be ?5.34 and ?3.14 eV, respectively. It was concluded that energy transfer took place from the oligofluorene blocks to the segments containing 3 and that direct charge trapping occurred in the segments containing 3 during the EL operation. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of the copolymer (x = 0.63, y = 0.37) containing 10 mol % 3 were very close to those (x = 0.67, y = 0.33) for National Television System Committee (NTSC) red with a maximum photometric power efficiency of 0.27 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3729–3737, 2006     

Synthesis and characterization of new light‐emitting copolymers in polymeric‐light‐emitting‐diode device fabrications

A series of thiophene‐containing photoactive copolymers consisting of alternating conjugated and nonconjugated segments were synthesized. The ¹H NMR spectra corroborated the well‐defined structures, and the copolymers not only were soluble in common organic solvents but also had high glass‐transition temperatures (ca. 130 °C) and good thermal stability up to 390 °C. Introducing aliphatic functional groups, such as alkyl or alkoxyl, into chromophores of the copolymers redshifted the photoluminescence spectra and lowered the optical bandgaps. The electrochemical bandgaps calculated from cyclic voltammetry agreed with the optical bandgaps and thus indicated that electroluminescence and photoluminescence originated from the same excited state. The energy levels (highest occupied molecular orbital and lowest unoccupied molecular orbital) of all the copolymers were lower than those of poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1.4‐phenylenevinylene] MEH–PPV, indicating balanced hole and electron injection, which led to improved performance in both single‐layer and double‐layer polymeric‐light‐emitting‐diode devices fabricated with these copolymers. All the copolymers emitted bluish‐green or green light above the threshold bias of 5.0 V under ambient conditions. At the maximum bias of 10 V, the electroluminescence of a device made of poly(2‐{4‐[2‐(3‐ethoxy phenyl)ethylene]phenyl}‐5‐{4‐[2‐(3‐ethoxy,4‐1,8‐octanedioxy phenyl)ethylene]phenyl}thiophene) was 5836 cd/m². The external electroluminescence efficiency decreased with the lifetime as the polymer degraded. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3954–3966, 2004     

Synthesis and characterization of diphenylaminodiphenyl stryl based alternating copolymers

Diphenylaminobiphenylated stryl based alternating copolymers with phenyl or fluorene, which were expected to have a terphenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant and a phenyl/fluorene/phenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant, were synthesized by a Suzuki coupling reaction. The obtained copolymers were confirmed with various types of spectroscopy. The alternating copolymers showed good hole‐injection properties because of their low oxidation potential and good solubility and high thermal stability with a high glass‐transition temperature. The alternating copolymers showed blue emissions because of the adjusted conjugation lengths; the maximum wavelength was 460 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} and 487 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl] vinylene‐alt‐9,9‐dihexylfluorene}. The maximum brightness of indium tin oxide/poly(3,4‐ethylene dioxythiophene)/polymer/LiF/Al devices with poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} or poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐9,9‐dihexylfluorene} as the emitting layer was 250 or 1000 cd/m², respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 341–347, 2007     

Thermally stable nonlinear optical polyurea functionalized by multiple charge‐transfer chromophore

A novel high glass‐transition temperature (272 °C) polyurea functionalized by a multiple charge‐transfer chromophore, 2‐{4‐[4,5‐bis(4‐nitrophenyl)imidazolyl]phenyl}‐4,5‐bis(4‐aminophenyl)imidazole, was synthesized. Simultaneous poling and polymerization and the in situ second‐harmonic generation (SHG) measurement technique was carried out to evaluate the thermal stability of the poling‐induced orientation. The nonlinear optical coefficient d₃₃ of poled polyurea film was 24 pm/V at 1064 nm fundamental wavelength. The SHG signal of the poled polymer film was quite stable below 200 °C and still remained 80% of its initial value after heating at 250 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4297–4301, 2002     

Photochemical control of photoluminescence property of photoactive polythiophenes

Azobenzene‐functionalized polythiophene derivatives, Poly[4‐((4‐(phenyl)azo)phenoxy)alkyl‐3‐thienylacetate] (alkyl=hexyl and octyl) (P6 and P8) and the copolymers of 3‐hexylthiophene and 4‐((4‐(phenyl)azo)phenoxy)alkyl‐3‐thienylacetate (alkyl=hexyl and octyl) (P66 and P86) were synthesized. The composition, structure, and thermal property of these polythiophene derivatives were fully characterized by NMR, FTIR, GPC, MDSC, and XRD. The structural dependence of the photochromic features and thermochromic behaviors were also investigated by means of photoluminescence and UV‐Vis absorption spectroscopy. The results have shown that the azobenzene substitution renders the homopolymer (P6 and P8) some interesting optical properties that can be modulated by UV light irradiation. In these azobenzene‐modified polythiophenes, the intensity of photoluminescent emission associated with the conjugated polythiophene main chain was found to decrease significantly upon UV irradiation. The finding suggests that the photo‐induced trans–cis isomerization of the azobenzene pendant groups has significant effect on photoluminescent emission. However, the effect becomes less prominent for copolymer P66 and P86 due to the lower content of azobenzene chromophore in the side chain of the copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1421–1432, 2005     

A Novel Procedure to Synthesize 3‐Chloro‐1‐(4a,10b‐diazaphenanthrene‐2‐yl)‐4‐phenyl Azetidin‐2‐ones and Exploration of Their Anti‐Inflammatory Activity

Some new derivatives of 3‐chloro‐1‐(4a,10b‐diazaphenanthrene‐2‐yl)‐4‐phenyl azetidin‐2‐one were synthesized through the reaction of N‐{4‐[phenyldiazenyl] phenyl}‐N‐[phenyl methylene] amine with 4‐[phenyldiazenyl] aniline. The resulting 3‐chloro‐4‐phenyl‐1‐{4‐[phenyldiazenyl] phenyl} azetidin‐2‐one intermediate in benzene was irradiated in a Pyrex vessel with 350 nm UV light in a photochemical reactor to give the desired derivatives (4a–j) . Structures of the new compounds were verified on the basis of spectral and elemental methods of analyses. Nine of the prepared compounds were tested for their anti‐inflammatory effects; most of these compounds showed potent and significant results compared with indomethacin.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Effect of side‐chain end groups on the optical,electrochemical, and photovoltaic properties of side‐chain conjugated polythiophenes

Three new side‐chain conjugated polythiophene derivatives, poly{3‐[2‐(3‐methoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3MOPVT), poly{3‐[2‐(3,5‐dimethoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3DMOPVT), and poly{3‐[2‐(3,4‐dioctyloxy‐phenyl)‐vinyl]‐thiophene} (P3DOPVT), were synthesized by Wittig‐Hornor reaction and GRIM method and compared with poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) for investigating the effect of the end groups of the conjugated side‐chain on the properties of the polymers. Owing to the electron‐donating ability of methoxy groups, the visible absorption peaks of P3MOPVT and P3DMOPVT solutions and films become stronger and red‐shifted compared with P3OPVT. The electrochemical bandgaps of the four polymers are 2.15 eV for P3OPVT, 1.99 eV for P3MOPVT, 1.85 eV for P3DMOPVT, and 2.36 eV for P3DOPVT, respectively, which indicate that the electron‐donating ability of the methoxy end group on the conjugated side chain of P3MOPVT and P3DMOPVT and the large steric hindrance of the two octyloxy end groups on the conjugated side chain of P3DOPVT have obvious influence on the electrochemical properties of the side‐chain conjugated polythiophenes. Polymer solar cells were fabricated with a structure of ITO/PEDOT:PSS/Polymer:PCBM/LiF/Al. The best device, based on P3DMOPVT, shows a power conversion efficiency of 1.63% under the illumination of AM1.5, 80 mW/cm². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4916–4922, 2006     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

双枝[1,3,4]-噁二唑衍生物的合成与荧光性质

通过Wittig反应和Heck反应合成了三个双枝噁二唑衍生物: N-{{{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}-4-苯基}二苯胺(BBOD-2), N,N-双{{{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}-4-苯基}苯胺(BBOD-3), N,N,N-三{4-{2-{3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]-苯基}-E-乙烯基}苯基}胺(BBOD-4). 化合物结构经过红外光谱、核磁共振谱、质谱和熔点确证, 测定了它们在不同溶剂中的紫外光谱和单光子荧光光谱. BBOD-1, BBOD-2, BBOD-3, BBOD-4在二氯甲烷中的最大吸收峰分别位于295, 390, 398和408 nm; 最大发射峰分别为360, 486, 483和487 nm. 讨论了Stokes位移与溶剂极性的关系.     

Synthesis and Biological Study of Some 4-oxo-Thiazolidine Derivatives of 2-Aminothiazole

Conventional and microwave assisted synthesis of new series of N‐[2‐{2‐(substituted phenyl)‐4‐oxo‐5‐(substituted benzylidene)‐1,3‐thiazolidine}‐iminoethyl]‐2‐aminothiazole 5a–5m have been developed. The cycloaddition reaction of thioglycolic acid with N‐{2‐(substituted benzylidenehydrazino)‐ethyl}‐2‐aminothiazole 3a–3m in the presence of anhydrous ZnCl₂ afforded new heterocyclic compounds N‐[2‐{2‐(substituted phenyl)‐4‐oxo‐1,3‐thiazolidine}‐iminoethyl]‐2‐aminothiazole 4a–4m . The later product on treatment with several selected substituted aromatic aldehydes in the presence of C₂H₅ONa undergoes Knoevenagel reaction to yield 5a–5m . The structures of compounds 1 , 2 , 3a–3m , 4a–4m and 5a–5m were confirmed by IR, ¹H NMR, ¹³C NMR, FAB‐Mass and chemical analysis. All above compounds were screened for their antimicrobial activities against some selected bacteria and fungi and antituberculosis study against M. tuberculosis.     

Synthesis and characterization of luminescent copolymers containing iminodibenzyl and divinylbenzene chromophores

New conjugated copolymers containing alternating N‐hexyl‐3,8‐iminodibenzyl and divinylbenzene chromophores {poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐2,5‐dihexyloxy‐1,4‐phenylene‐1,2‐ethenylene) ( P1 ) and poly[N‐hexyl‐3,8‐iminodibenzyl‐2,5‐bis(hexyloxy)cyanoterephthalidene] ( P2 )} were synthesized according to Wittig and Knoevenagel polymerization. A copolymer containing alternating carbazole and divinylbenzene derivatives {poly[9‐(2‐ethylhexyl)‐3,6‐carbazole‐1,2‐ethenylene‐2,5‐dihexyloxy‐1,4‐phenylene‐1,2‐ethenylene] ( P3 )} was also synthesized for comparison. The copolymers were soluble in common organic solvents such as tetrahydrofuran and toluene. Absorption and photoluminescence measurements revealed that cyano substitution at the vinylene moiety in P2 brought about a significant bathochromic shift and led to an electroluminescence color change from green to orange. The band edge energies of the copolymers were estimated from cyclic voltammograms and optical band gaps. P1 and P3 showed similar highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels, indicating that the electron‐donating abilities of the iminodibenzyl and carbazole chromophores were comparable. However, compared with those of P1 and P3 , the HOMO and LUMO levels of P2 were greatly reduced because of conjugating and electron‐withdrawing CN groups. The threshold electric field of an Al/ P1 /ITO glass single‐layer light‐emitting diode was approximately 10 × 10⁵ V/cm, whereas those for P2 and P3 were 7.5 and 16 × 10⁵ V/cm, respectively. The electroluminescence emission maxima of P1–P3 were 498, 514, and 559 nm, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3847–3857, 2002     

Low‐bandgap quinoxaline‐based D–A‐type copolymers: Synthesis,characterization, and photovoltaic properties

Three classes of quinoxaline (Qx)‐based donor–acceptor (D–A)‐type copolymers, poly[thiophene‐2,5‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diyl] P(T‐Qx), poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diy} P(BDT‐Qx), and poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(5′,8′‐di‐2‐thienyl‐2,3‐bis(4‐octyloxyl)phenyl)‐quinoxaline‐5,5‐diyl} P(BDT‐DTQx), were synthesized via a Stille coupling reaction. The Qx unit was functionalized at the 2‐ and 3‐positions with 4‐(octyloxy)phenyl to provide good solubility and to reduce the steric hindrance. The absorption spectra of the Qx‐containing copolymers could be tuned by incorporating three different electron‐donating moieties. Among these, P(T‐Qx) acted as an electron donor and yielded a high‐performance solar cell by assuming a rigid planar structure, confirmed by differential scanning calorimetry, UV–vis spectrophotometer, and density functional theory study. In contrast, the P(BDT‐Qx)‐based solar cell displayed a lower power conversion efficiency (PCE) with a large torsional angle (34.7°) between the BDT and Qx units. The BDT unit in the P(BDT‐DTQx) backbone acted as a linker and interfered with the formation of charge complexes or quinoidal electronic conformations in a polymer chain. The PCEs of the polymer solar cells based on these copolymers, in combination with [6,6]‐phenyl C70 butyric acid methyl ester (PC₇₁BM), were 3.3% [P(T‐Qx)], 1.9% [P(BDT‐Qx)], and 2.3% [P(BDT‐DTQx)], respectively, under AM 1.5G illumination (100 mW cm^?2). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of the terminal substituent of azobenzene on the properties of ABA triblock copolymers via atom transfer radical polymerization

The effect of the terminal substituent of azobenzene on the properties of ABA triblock copolymers was investigated. For this study, three kinds of azobenzene‐containing monomers with different terminal substituents—6‐[4‐(4‐methoxyphenylazo)phenoxy] hexyl methacrylate, 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate, and 6‐[4‐(4‐nitrophenylazo)phenoxy]hexyl methacrylate—were used to synthesize ABA triblock copolymers PMMAzo₂₅–PEG₁₃–PMMAzo₂₅/PMMAzo₁₂–PEG₁₃–PMMAzo₁₂, PEMAzo₁₄–PEG₁₃–PEMAzo₁₄, and PNMAzo₁₄–PEG₁₃–PNMAzo₁₄, respectively, by atom transfer radical polymerization (PMMAzo is poly{6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate}, PEMAzo is poly{6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate}, and PNMAzo is poly{6‐[4‐(4‐nitrophenylazo)phenoxy]hexyl methacrylate}). These copolymers were characterized with ¹H NMR spectroscopy and gel permeation chromatography and exhibited controlled molecular weights and narrow molecular weight distributions. Differential scanning calorimetry and polarizing optical microscopy showed that these copolymers had mesophases. PMMAzo₂₅–PEG₁₃–PMMAzo₂₅ and PMMAzo₁₂–PEG₁₃–PMMAzo₁₂ had a smectic mesophase and a nematic mesophase, whereas both PEMAzo₁₄–PEG₁₃–PEMAzo₁₄ and PNMAzo₁₄–PEG₁₃–PNMAzo₁₄ had a nematic mesophase. This demonstrated that the liquid‐crystalline properties of these copolymers highly depended on the terminal substituent of azobenzene. The photoresponsive behavior of these copolymers was also investigated in tetrahydrofuran solutions, and the influence of the terminal substituents attached to azobenzene was studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5190–5198, 2007     

以N为耦合中心多枝分子的双光子上转换荧光

采用非线性透过率法研究了以N为耦合中心的多枝化合物N-[4-{2-(3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2-]苯基}-1-乙烯基}苯基}-N,N-二苯胺(BPODPA), N,N-双[4-{2-(3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2-]苯基}-1-乙烯基}苯基}-N-苯胺(BBPOPA)和N,N,N-三[4-{2-(3,5-二-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯基}-1-乙烯基}苯基}胺(TBPOA)的双光子吸收性质, 测定了化合物的单光子荧光光谱和双光子上转换荧光光谱, 研究了多枝化对三苯胺分子双光子吸收和双光子激发荧光性质的影响.在800 nm波长的激光激发下,化合物BPODPA、BBPOPA和TBPOA在二氯甲烷溶液中发出很强的蓝绿色双光子上转换荧光, 荧光峰分别位于502、515 和518 nm. 这些多枝结构化合物的双光子吸收截面较大, 双光子吸收增强来源于多枝分子中扩展的π共轭体系和重复单元的协同效应.     

Non‐symmetric liquid crystal trimers

Four homologous series of non‐symmetric linear liquid crystalline trimers, the 4‐[(4‐{n‐[4‐(4‐methoxy‐phenylazo)phenoxy]alkyloxy}benzylidene)amino]benzoic acid 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl esters, 4‐[(4‐{n‐[4‐(4‐cyanophenylazo)phenoxy]alkyloxy}benzylidene)amino]benzoic acid 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl esters, 4‐[(4‐{n‐[4‐(4‐methoxyphenylazo)phenoxy]alkyloxy}benzylidene)amino]benzoic acid 6‐[4‐(4‐cyanophenylazo)phenoxy]hexyl esters and 4‐[(4‐{n‐[4‐(4‐cyanophenylazo)phenoxy]butoxy}benzylidene)amino]benzoic acid 6‐[4‐(4‐cyanophenylazo)phenoxy]hexyl esters, have been synthesized and characterized. In each series one spacer was held constant while the length of the second was varied from 3 to 12 methylene units. All these trimers were nematogenic and exhibited pronounced odd–even effects in both their clearing temperatures and associated entropies. Only two of the trimers exhibited a smectic phase, and specifically those containing two differing terminal mesogenic groups and an undecyl spacer. This strongly suggests the driving force for smectic phase formation is a combination of molecular shape and a specific interaction between unlike mesogenic units. The smectic phase has been assigned as a triply‐intercalated alternating smectic C phase, the first example of its kind.     

Synthesis and properties of polythiophenes with conjugated side‐chains containing carbon–carbon double and triple bonds

Two soluble side‐chain conjugated polythiophenes, poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) and poly{3‐(4‐octyloxy‐phenylethynyl)‐thiophene} (P3OPET) have been synthesized successfully. In P3OPVT and P3OPET, substituted benzene rings are connected with the polythiophene backbone through trans carbon–carbon double bond and carbon–carbon triple bond, respectively. Absorption spectra of the P3OPVT and P3OPET both show two absorption peaks located in UV and visible region, respectively. The results of optical and electrochemical measurements indicate that the conjugated side‐chains can reduce the bandgap effectively. This type of side‐chain conjugated polythiophenes may be promising for the applications in polymer photovoltaic cells and field effect transistors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2206–2214, 2006     

Photocrosslinkable liquid‐crystalline block copolymers with coumarin units synthesized with atom transfer radical polymerization

A new class of liquid‐crystalline (LC) homopolymers of poly{11‐[4‐(3‐ethoxycarbonyl‐coumarin‐7‐oxy)‐carbonylphenyloxy]‐undecyl methacrylate} containing a coumarin moiety as a photocrosslinkable unit with various polymerization degrees and their LC‐coil diblock and LC‐coil‐LC triblock copolymers with polystyrene as the coil segment was synthesized with the atom transfer radical polymerization method. All the homopolymers and block copolymers synthesized here exhibited narrow polydispersities, indicating well‐controlled living polymerization. Differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction confirmed that all the homopolymers and block copolymers exhibit a monolayer smectic A phase. Coumarin moieties in the polymers can be photodimerized under λ > 300 nm light irradiation to yield crosslinked network structures, which improve the thermal stability of a polymer nanostructure because of microphase separation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2197–2206, 2003