Role of gemini surfactants (m‐s‐m type; m = 16, s = 4–6) on the reaction of [Zn(II)‐Gly‐Phe]+ with ninhydrin

In the present paper, reaction of zinc‐glycylphenylalanine ([Zn(II)‐Gly‐Phe]⁺) with ninhydrin has been investigated in gemini (m‐s‐m type; m = 16, s = 4–6) surfactants at temperature (70 °C) and pH (5.0). Monitoring the appearance of product at 400 nm was used to follow the kinetics, spectrophotometrically. The order of the reaction with respect to [Zn(II)‐Gly‐Phe]⁺ was unity while with respect to [ninhydrin] was fractional. The reaction constants involved in the mechanism were obtained. In addition to the rate constant (k_Ψ) increase and leveling‐off regions are observed with the geminis, just like as seen with conventional surfactant hexadecyltrimethylammonium bromide (CTAB), the former produced a third region of increasing k_Ψ at higher concentrations. A close agreement between observed and calculated rate constants was found under varying experimental conditions. A suitable mechanism consistent with the experimental findings has been proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparative studies on reaction of bis(p‐nitrophenyl) phosphate and α‐nucleophiles in cationic micellar media

We studied the cleave of bis(p‐nitrophenyl) phosphate (BNPP) over a pH range of 7.0–12.0 in the presence of cationic micelles of cetyldiethylethanolammonium bromide, cetyldimethylethanolammonium bromide, cetylpyridinium bromide, cetyltrimethylammonium bromide, and cetylpyridinium chloride by using different α‐nucleophiles, viz acetohydroxamate, benzohydroxamate, salicylhydroxamate, butane‐2,3‐dione monooximate, and α‐benzoin oximate ions. With the use of α‐nucleophiles in cationic micellar media, the hydrolytic cleavage of BNPP was found to be approximately 10⁵‐fold faster than its spontaneous hydrolysis. All reactions followed pseudo‐first‐order kinetics. The effect of various concentrations of cationic micelles for the reaction of BNPP and α‐nucleophiles has been studied. The variation of k_obs values of the reactions depends on the micellar structure, that is, head groups, hydrophobic tail length, and counter ion. Copyright © 2012 John Wiley & Sons, Ltd.     

Solvent effects in the reaction between (anthracen‐9‐yl)methyl sulfides and electron‐deficient acetylenes

Solvent‐dependent diverse reactivity of (anthracen‐9‐yl)methyl sulfides with a few electron‐deficient acetylenes is described. Diversity in reactivity is attributed to competition between one electron transfer, two electron transfer and Diels–Alder reaction of these sulfides with electron‐deficient acetylenes. We have proposed plausible mechanisms to account for various reactions observed by us. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP)

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP) have been followed by Reversed phase high performance liquid chromatography (RP‐HPLC) over a wide pH range at 90 °C. Under neutral and basic conditions (pH ≥ 7), disappearance of the starting material (first‐order in [OH^?]) was accompanied by formation of a mixture of adenosine 2′‐monophosphate and 3′‐monophosphate (2′‐AMP and 3′‐AMP). Under very acidic conditions (from H₀ = ?0.7 to 0.2), c‐di‐AMP undergoes two parallel reactions (first‐order in [H⁺]): the starting material is cleaved to 2′‐AMP and 3′‐AMP and depurinated to adenine (i.e., cleavage of the N‐glycosidic bond), the former reaction being slightly faster than the latter one. At pH 1–3, isomerization to cyclic bis(2′‐5′)diadenylic acid competes with the depurination. Copyright © 2012 John Wiley & Sons, Ltd.     

Dramatic solvent and concentration dependence in the reaction of (anthracen‐9‐yl)methanamines with suitable electron‐deficient acetylenes

Herein, we describe diverse reactivity of (anthracen‐9‐yl)methanamines with a few electron‐deficient acetylenes. Depending on the solvent and concentration, (anthracen‐9‐yl)methanamines reacted with acetylenes through one electron transfer, two electron transfer, or Diels–Alder pathways; and under certain conditions, we observed multiple reaction pathways. We have proposed plausible mechanisms to account for various reactions observed by us. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐pressure effects on the Diels–Alder reaction in room temperature ionic liquids

The effect of pressure on the Diels–Alder reaction was examined in room temperature ionic liquids, followed by high‐pressure FT‐IR spectroscopy using pressures up to 150 MPa. Pressure enhances the kinetic sensitivity of the reaction. The kinetic effect of fluorophobic interactions was examined using ionic liquids with fluorous cations. Ionic liquids in combination with ZnI₂ as a Lewis acid catalyst were also studied under high pressure. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental survey of the kinetics of acene Diels–Alder reactions

Second‐order rate constants were gathered for solution Diels–Alder reactions of substituted and unsubstituted acenes, with the intention of ascertaining ideal diene–dienophile combinations. Particular focus was placed on the larger ring systems namely tetracene, pentacene, and rubrene. The rate constants between the acenes ranged roughly six orders of magnitude, from the slowest reacting diene, rubrene, to the fastest diene, pentacene. The utilized dienophiles covered a large range of reactivity from 2,3‐dichloromaleic anhydride to tetracyanoethylene. To aid in the interpretation of acene reactivity, constants were compared to the extensive body of Diels–Alder literature with well‐studied dienes such as anthracene and trans‐1‐methoxy‐1,3‐butadiene serving as points of reference. Complex reaction kinetics for the addition of MeTAD and rubrene was found: initial fast consumption generated an intermediate, followed by dramatically slower product formation. The kinetic data creates a foundation for the analysis of prior and future reactions between organic semiconductor acene materials with volatized dienophiles, a surface functionalization technique for enhancing these electronic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Micellar effects on aromatic nucleophilic substitution by the ANRORC mechanism. Hydrolysis of 2‐chloro‐3,5‐dinitropyridine

The hydrolysis of 2‐chloro‐3,5‐dinitropyridine by sodium hydroxide in the presence of micelles of cetyltrimethylammonium bromide (CTABr), cetyltrimethylammonium chloride (CTACl) and sodium dodecyl sulfate (SDS) has been studied. The reaction follows a consecutive reaction path involving the formation of a long‐lived intermediate 3 and finally giving the product, 3,5‐dinitro 2‐pyridone 2 . The mechanism follows an addition of the nucleophile, ring opening and ring closure (ANRORC) reaction path. The rate constant was observed to be first‐order dependent on [OH^?]. The rate of reaction increased on increasing [CTABr] and, after reaching to the maxima, it started decreasing. The anionic SDS micelles inhibited the rate of hydrolysis. The results of the kinetic experiments were treated with the help of the pseudophase ion exchange model and the Menger–Portnoy model. The added salts, viz. NaBr, Na‐toluene‐4‐sulphonate, and (CH₃)₄NBr on varying [CTACl] and [SDS] inhibited the rate of reaction. The various kinetic parameters in the presence and absence of salts were determined and are reported herewith. Copyright © 2011 John Wiley & Sons, Ltd.     

Gas‐phase elimination kinetics of selected aliphatic α,β‐unsaturated aldehydes catalyzed by hydrogen chloride

The gas‐phase elimination of 2‐methyl‐2‐propenal catalyzed by HCl yields propene and CO gas, while E‐2‐pentenal with the same catalyst gives butene and CO gas. The kinetics determinations were carried out in a static system with the reaction vessels deactivated with allyl bromide and the presence of the free radical inhibitor toluene. Temperature and pressure ranges were 350.0–410.0 °C and 34–76 Torr. The elimination reactions are homogeneous and unimolecular, and follow a first‐order rate law. The rate coefficients for the reactions are expressible by the following Arrhenius equations: Data from the kinetic and thermodynamic parameters of these catalyzed elimination reactions implies a mechanism of a concerted five‐membered cyclic transition state structure for the formation of the corresponding olefin and carbon monoxide. Copyright © 2015 John Wiley & Sons, Ltd.     

Kinetics study of a Diels‐Alder reaction in mixtures of an ionic liquid with molecular solvents

The second‐order rate constants for cycloaddition reaction of cyclopentadiene with naphthoquinone were determined spectrophotometrically in various compositions of 1‐(1‐butyl)‐3‐methylimidazolium terafluoroborate ([bmim]BF₄) with water and methanol at 25 °C. Rate constants of the reaction in pure solvents are in the order of water > [bmim]BF₄ > methanol. Rate constants of the reaction decrease sharply with mole fraction of the ionic liquid in aqueous solutions and increase slightly to a maximum in alcoholic mixtures. Multi‐parameter correlation of logk₂ versus solute–solvent interaction parameters demonstrated that solvophobicity parameter (Sp), hydrogen‐bond donor acidity (α) and hydrogen‐bond acceptor basicity (β) of media are the main factors influencing the reaction rate constant. The proposed three‐parameter model shows that the reaction rate constant increases with Sp, α and β parameters. Copyright © 2008 John Wiley & Sons, Ltd.     

Kinetic study of the formation reaction of N‐chloro‐2‐oxazolidinone

The chlorination reactions of 2‐oxazolidinone with hypochlorous acid (HOCl), tert‐butyl hypochlorite (^tBuOCl) and N‐chlorosuccinimide (NCS) were studied at 25 °C, constant ionic strength, and under isolation conditions. The kinetic results obtained in the formation processes of the N‐chloro‐2‐oxazolidinone are summarized in this paper. The kinetics studied showed a first order with respect to the concentration of the each reactant and a complex dependence of the pH on the rate constant. The reactivity order with respect to the chlorinating agent found is k(HOCl) > k(^tBuOCl) > k(NCS). Copyright © 2015 John Wiley & Sons, Ltd.     

Photoinduced decarboxylation of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid

Photoinduced reactions of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid (SeQCA) were investigated in alkaline media (aqueous NaOH solutions) by electron paramagnetic resonance (EPR) spectroscopy, following the in situ formation of paramagnetic species. According to UV–Vis and nuclear magnetic resonance investigations, protonation (pH ≈ 11) and deprotonation (pH ≈ 13) of the imino hydrogen of the 4‐pyridone moiety has to be considered, reflected also in the different EPR spectra observed upon irradiation. Photoinduced generation of radicals was found only for carboxylate substituted SeQCA; other studied selenadiazoloquinolone derivatives, together with those substituted at the C(8) position (R = H, COOCH₂CH₃, COOCH₃, COCH₃ or CN), did not generate paramagnetic species during exposure. Consequently, photodecarboxylation was suggested as the decisive step, accompanied by the decomposition of the selenadiazole ring, resulting in the formation of ortho‐hydroxylate anions. EPR parameters elucidated from experimental EPR spectra obtained at pH ≈ 11 and pH ≈ 13 indicate the formation of oxygen‐centered radicals at the decarboxylated 4‐pyridone ring. EPR spin trapping experiments with nitromethane confirmed a very effective photoinduced electron transfer from all the selenadiazoloquinolones investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

A combined experimental and density functional study of 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes reactivity towards the allylic chlorine

Nucleophilic substitution and dehydrochlorination reactions of a number of the ring‐substituted 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes are studied both experimentally and theoretically. The developed synthetic procedures are characterized by a general rapidity, cheapness, and simplicity providing moderate to high yields of 1‐arylsulfonyl 1,3‐butadienes (48–95%), 1‐(arylsulfonyl)‐2‐R‐4‐(N,N‐dialkylamino)‐2‐butenes (31–53%), 1‐(arylsulfonyl)‐2‐R‐2‐buten‐4‐ols (37–61%), and bis[4‐(arylsulfonyl)‐3‐R‐but‐2‐enyl]sulfides (40–70%). The density functional theory B3LYP/6‐311++G(2d,2p) calculations of the intermediate allylic cations in acetone revealed their high stability occurring from a resonance stabilization and hyperconjugation by the SO₂Ar group. The reactivity parameters estimated at the bond critical points of the diene/allylic moiety display a high correlation (R² > 0.97) with the Hammett (σ_p) constants. 1‐Arylsulfonyl 1,3‐butadienes are characterized by a partly broken π conjugated system, which follows from analysis of the two‐centered delocalization (δ) and localization (λ) index values. The highest occupied molecular orbital energies of 1‐arylsulfonyl 1,3‐butadienes are lower than those of 1,3‐butadiene explaining their low reactivity towards the Diels–Alder condensation. Copyright © 2015 John Wiley & Sons, Ltd.     

Self‐Assembly of Drug–Drug Conjugates as Drug Self‐Delivery System for Tumor‐Specific pH‐Triggered Release

An acid‐labile doxorubicin dimer (D‐DOX) is designed as drug–drug conjugate for tumor intracellular pH‐triggered release, by conjugating doxorubicin (DOX) with adipic acid dihydrazide (ADH). The dimer‐based surfactants modified with polyethylene glycol (PEG), DOX‐ADH‐DOX‐PEG or are synthesized by mono‐PEGylation and bi‐PEGylation, respectively. Then the prodrug nanoparticles are fabricated with different drug contents via dialyzing the mixture solution of D‐DOX and the PEGylated surfactants in dimethyl sulfoxide (DMSO) with different mass ratios against water. It is found that the smaller prodrug nanoparticles (142–163 nm) could be obtained with the mono‐PEGylated surfactant, than those of 157–225 nm with the bi‐PEGylated surfactant. Furthermore, the mono‐PEGylated surfactant results in a higher drug content of 51% due to their lower PEG contents. All prodrug nanoparticles could release DOX completely within 36 h at pH 5.0, with the premature drug leakage of less than 10% at pH 7.4. The 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assays demonstrate the proposed drug self‐delivery system possessed an enhanced anticancer efficacy against HepG2 cells than the free DOX.     

Reactions of chlorination with tert‐butyl hypochlorite (TBuOCl)

The chlorination reactions of nitrogenous organic compounds (2,2,2‐trifluoroethylamine, benzylamine, glycine, and dimethylamine) by tert‐butyl hypochlorite (^tBuOCl) were studied at 25 °C, ionic strength 0.5 M and under isolation conditions. The kinetic results obtained in the formation processes of the corresponding N‐chloramines in acid medium (pH = 5–7) are summarized in this paper. Kinetic studies showed a first order with respect to ^tBuOCl concentration. The chlorination reactions involving benzylamine, glycine and dimethylamine were all first order with respect to nitrogenous compound concentration and approximately ?1 order with respect to proton concentration. The reaction with 2,2,2‐trifluoroethylamine was more complex, and the order of reaction with respect to the amine varied with pH. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetics and thermochemistry of the unusual [2π + 2σ + 2σ]‐cycloaddition of quadricyclane with some dienophiles

Kinetic parameters of the unusual [2π + 2σ + 2σ]‐cycloaddition reactions of quadricyclane ( 1 ) with tetracyanoethylene ( 2 ), 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 3 ), N‐phenylmaleimide ( 4 ), and diethyl azodicarboxylate ( 5 ) are determined experimentally. Additionally, the enthalpies of 1  +  2 reaction in 1,4‐dioxane solution (?236.6 ± 1.0 kJ mol^?1) and 1  +  3 reaction in toluene (?255.0 ± 2.8 kJ mol^?1) are determined calorimetrically and shown to be the largest in absolute magnitude among all known cycloaddition reactions involving these dienophiles. Solvent effect on the rate of 1 + 3 reaction in 11 solvents is studied and found to be moderate and similar to that of the conventional Diels‐Alder and ene reactions. The difference in the reaction rate constants of 1 with different dienophiles can be up to 9 orders of magnitude and is mainly caused by the difference in activation enthalpies. This difference is not correlated with the standard enthalpies of reactions and is likely the result of high sensitivity of the [2π + 2σ + 2σ] reaction rates to the energy of donor‐acceptor interactions between the reactants.     

Joint theoretical and experimental study of the gas‐phase elimination kinetics of tert‐butyl ester of carbamic,N, N‐dimethylcarbamic,N‐hydroxycarbamic acids and 1‐(tert‐butoxycarbonyl)‐imidazole

The gas‐phase elimination kinetics of the title compounds were carried out in a static reaction system and seasoned with allyl bromide. The working temperature and pressure ranges were 200–280 °C and 22–201.5 Torr, respectively. The reactions are homogeneous, unimolecular, and follow a first‐order rate law. These substrates produce isobutene and corresponding carbamic acid in the rate‐determining step. The unstable carbamic acid intermediate rapidly decarboxylates through a four‐membered cyclic transition state (TS) to give the corresponding organic nitrogen compound. The temperature dependence of the rate coefficients is expressed by the following Arrhenius equations: for tert‐butyl carbamate logk₁ (s^?1) = (13.02 ± 0.46) – (161.6 ± 4.7) kJ/mol(2.303 RT)^?1, for tert‐butyl N‐hydroxycarbamate logk₁ (s^?1) = (12.52 ± 0.11) – (147.8 ± 1.1) kJ/mol(2.303 RT)^?1, and for 1‐(tert‐butoxycarbonyl)‐imidazole logk₁ (s^?1) = (11.63 ± 0.21)–(134.9 ± 2.0) kJ/mol(2.303 RT)^?1. Theoretical studies of these elimination were performed at Møller–Plesset MP2/6‐31G and DFT B3LYP/6‐31G(d), B3LYP/6‐31G(d,p) levels of theory. The calculated bond orders, NBO charges, and synchronicity (Sy) indicate that these reactions are concerted, slightly asynchronous, and proceed through a six‐membered cyclic TS type. Results for estimated kinetic and thermodynamic parameters are discussed in terms of the proposed reaction mechanism and TS structure. Copyright © 2007 John Wiley & Sons, Ltd.     

Regioselectivity and stereoselectivity of Diels–Alder reaction: a DFT study on the functionalization of organic semiconductor crystals

Diels–Alder (DA) reaction is one of the most commonly tools in functionalizing organic semiconductor crystals. The DA reactions of two organic semiconductors, i.e. tetracene ( 1 ) and rubrene ( 2 ), to several dienophiles ( 3 to 7 ) were performed experimentally recently. But the kinetics and mechanism of stereoselectivity and regioselectivity remain unknown. In the current study, all related 20 DA reactions (totally 32 possible pathways) were investigated by density functional theory. It was found that the reaction of 7 and a–b position of 1 is the most favorable one. The c–d position of 2 is more reactive than its a–b position when 2 combines with 3 , but is less reactive when combines with 4 to 7 . The endo and exo pathways have similar activation barriers in each reaction. The rate coefficients were calculated using the canonical variational transition state theory and their Arrhenius expressions were fitted. The theoretical conclusion agrees with the experimental observations and is of general importance for similar reactions. Solvent has a slight effect on these reactions. Copyright © 2016 John Wiley & Sons, Ltd.