Water‐based ZrO2 pretreatment for AA2024 aluminum alloy

Design, development and scale‐up of environmentally friendly coatings are very important in order to replace chromate‐based coatings for aluminum alloys. Sol–gel materials are candidates for use in protective coating applications, as it is possible to form highly adherent and chemically inert oxide films on metal substrates. ZrO₂ pretreatments were developed by means of sol–gel technology. An inorganic salt was employed as Zr precursor in an aqueous solution. The deposition was initially carried out on AA2024 by means of dip and spray technology at laboratory scale. Corrosion inhibitors were introduced to improve corrosion behavior of the films. At a later stage, coating deposition was carried out with a robot‐controlled air‐pressure gun in spraying cabins in order to evaluate industrial production of the pretreatments. Film morphology and composition were investigated by means of SEM‐EDXS and GDOES. The electrochemical behavior of the ZrO₂ pretreatments was investigated by means of potentiodynamic polarization. The water‐based ZrO₂ pretreatment investigated in this work is thin and well adherent on the substrate. Barrier properties are similar to those of chromate conversion coating. Results on samples produced with robot‐controlled air‐pressure gun indicate that ZrO₂ pretreatments are suitable for industrial application. Copyright © 2009 John Wiley & Sons, Ltd.     

Sol–gel transition behavior of biodegradable three‐arm and four‐arm star‐shaped PLGA–PEG block copolymer aqueous solution

Two types of temperature‐sensitive biodegradable three‐arm and four‐arm star‐shaped poly(DL ‐lactic acid‐co‐glycolic acid‐b‐ethylene glycol) (3‐arm and 4‐arm PLGA–PEG) were successfully synthesized via the coupling reaction of 3‐arm and 4‐arm PLGA and α‐monocarboxyl‐ω‐monomethoxypoly(ethylene glycol) (CMPEG). In dilute aqueous solutions, star PLGA–PEGs showed the temperature‐ and concentration‐dependent formation and aggregation of micelles over specific concentration and specific temperature. With increasing the molecular weight and the relative hydrophobicity of hydrophobic PLGA block, critical micelle temperature (CMT) decreased. Aqueous solution of 4‐arm PLGA–PEG started to form micelles at lower temperature and showed sharper temperature‐dependent growth in micelle size. These results are due to the enhanced hydrophobicity of PLGA block. On the other hand, at high concentration, two types of 3‐arm and 4‐arm PLGA–PEG showed sol–gel–sol transition behavior as the temperature was increased. The 3‐arm and 4‐arm PLGA–PEG showed sol–gel transition at higher polymer concentrations (above 24 wt %) than the PEG–PLGA–PEG triblock copolymer. As the molecular weight and the relative hydrophobicity of PLGA block increased, the critical gel concentration (CGC) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 888–899, 2006     

Homogeneous anionic PPE hybrids with silica gel

Anionic poly(p‐phenylene‐ethynylene) (PPE) incorporated polymer hybrids were synthesized from the PPE and tetramethoxysilane together with the organic polymers such as poly(vinylpyrrolidone) via a sol–gel method. Up to 10 wt % of the anionic PPE could be dispersed homogeneously in the resulting polymer hybrid matrix. The obtained polymer hybrids exhibited controllable photoluminescence properties by the modification of the internal environment of organic–inorganic polymer hybrids by changing the organic/inorganic ratios. The photoluminescence of the anionic PPE surrounded by the polymer hybrid matrix was reinforced against the thermal irradiation. Moreover, the photoluminescence of the obtained organic–inorganic polymer hybrids was also tuned by utilizing ionic interactions between the anionic PPE and the inorganic matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3749–3755, 2008     

Jacket‐like structure of donor–acceptor chromophores‐based conducting polymers for photovoltaic cell applications

Through the Stille coupling polymerization, a series of soluble acceptor/donor quinoxaline/thiophene alternating conducting polymers with a hole‐transporting moiety of carbazole as a side chain ( PCPQT ) has been designed, synthesized, and investigated. The UV–vis measurement of the charge‐transferred type PCPQT s of different molecular weights with low polydispersity exhibits a red shifting of their absorption maximum from 530 to 630 nm with increasing chain length (M_n: from 1100 to 19,200). The HOMO and LUMO energy levels of PCPQT can be determined from the cyclic voltammetry measurement to be ?5.36 and ?3.59 eV, respectively. Solar cells made from PCPQT/PCBM bulk heterojunction show a high open‐circuit voltage, V_oc of ～0.75 V, which is significantly higher than that of a solar cell made from conventional poly(3‐hexyl thiophene)/ PCBM as the active polymer PCPQT has lower HOMO level. Further improvements are anticipated through a rational design of the new low band‐gap and the structurally two‐dimensional donor–acceptor conducting polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1607–1616, 2010     

Nanoreactor‐Assisted Polymerization Toward Stable Dispersions of Conductive Composite Particles

We demonstrate the functioning of a macromolecular nanoreactor which guides a reaction in a confined volume and leads toward improved functional properties of a product material. In our approach, the polymerization of aniline (ANi) is conducted within the interfacial volume of spherical polyelectrolyte brushes (SPB) which are densely affixed to colloidal particles. The SPB provide optimal conditions for matrix polymerization by the efficient confinement of ANi monomers within the finite volume of polyelectrolyte brushes and controlled delivery of the oxidizing reagent to the reaction volume. The excellent kinetic stability of the resulting core–shell particles together with the high macroscopic conductivity of the respective composite open up perspectives for novel materials (a conductive ink).

     

Phase structure and thermomechanical properties of primary and tertiary amine‐cured epoxy/silica hybrids

Several kinds of organic–inorganic hybrids were synthesized from an epoxy resin and a silane alkoxide with a primary amine‐type curing agent or tertiary amine curing catalyst. In the hybrid systems cured with the primary amine‐type curing agent, the storage modulus in the high‐temperature region increased, and the peak area of the tan δ curve decreased. Moreover, the mechanical properties were improved by the hybridization of small amounts of the silica network. However, these phenomena were not observed in the hybrid systems cured with the tertiary amine catalyst. The differences in the network structures of the hybrid materials with the different curing processes were characterized with Fourier transform infrared (FTIR). In the hybrid systems cured with the primary amine‐type curing agent, FTIR results showed the formation of a covalent bond between silanol and hydroxyl groups that were generated by the reaction of an epoxy group with an active hydrogen of the primary amine. However, this phenomenon was not observed in the hybrids cured with the tertiary amine. The hybrids with the primary amine showed a homogeneous microstructure in transmission electron microscopy observations, although the hybrids cured with the tertiary amine showed a heterogeneous structure. These results mean that the differences in the interactions between the organic and inorganic phases significantly affect the properties and microstructures of the resultant composites. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1071–1084, 2001     

One‐step preparation of solution processable conducting polyaniline by inverted emulsion polymerization using didecyl ester of 4‐sulfophthalic acid as multifunctional dopant

A new one‐step method of preparation of solution processable conductive polyaniline (PANI) is reported using didecyl ester of 4‐sulfophthalic acid (DESPA) as multifunctional material. It consists of inversed emulsion polymerization of aniline in water/chloroform mixture with benzoyl peroxide initiator, maleic acid (MA) as a codopant and DESPA as protonating agent, surfactant, and plasticizer. The resulting product combines reasonable conductivity (ca.0.03 S/cm) with solubility in common solvents such as tetrahydrofuran and chloroform. Elemental analysis together with spectroscopic studies show that the protonation level of emulsion polymerized PANI (0.47 per mer involving one ring and one nitrogen) is very close to that predicted for PANI in the oxidation state of emeraldine (0.5). MA is incorporated into the polymer matrix as a co‐dopant in the ratio 1:4 with respect to the DESPA dopant. PANI‐DESPA‐MA three components system shows a highly ordered, layer‐type supramolecular structure, in which planes of regularly π‐stacked PANI chains are separated by a double layer of dopants. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1051–1057, 2008     

HPW/PDMAEMA‐b‐PMAA/ZIF‐8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA‐b‐PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as‐obtained HPW/PDMAEMA‐b‐PMAA was added to the synthesis of ZIF‐8. During the formation of ZIF‐8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF‐8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 hybrid material was characterized by using powder X‐ray diffraction (PXRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^?1, which was 7.5‐times higher than that of commercially available P25 (0.0032 min^?1). In the presence of H₂O₂, the kinetic degradation parameters of the composite reached 0.0634 min^?1, which was about 19.8‐times higher than that of P25.     

Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water

The spontaneous hydrogel formation of a sort of biocompatible and biodegradable amphiphilic block copolymer in water was observed, and the underlying gelling mechanism was assumed. A series of ABA‐type triblock copolymers [poly(D,L ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L ‐lactic acid‐co‐glycolic acid)] and different derivatives end‐capped by small alkyl groups were synthesized, and the aqueous phase behaviors of these samples were studied. The virgin triblock copolymers and most of the derivatives exhibited a temperature‐dependent reversible sol–gel transition in water. Both the poly(D,L ‐lactic acid‐co‐glycolic acid) length and end group were found to significantly tune the gel windows in the phase diagrams, but with different behaviors. The critical micelle concentrations were much lower than the associated critical gel concentrations, and an intact micellar structure remained after gelation. A combination of various measurement techniques confirmed that the sol–gel transition with an increase in the temperature was induced not simply via the self‐assembly of amphiphilic polymer chains but also via the further hydrophobic aggregation of micelles resulting in a micelle network due to a large‐scale self‐assembly. The coarsening of the micelle network was further suggested to account for the transition from a transparent gel to an opaque gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1122–1133, 2007     

Phase‐separated,conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer

As an alternative method for processing polyaniline (PANI) from its conducting (protonated) state, vacuum casting of PANI from a methanesulfonic acid (MSA) solution provided films with electrical conductivity values of about 130–150 S/cm. In addition, we similarly prepared blended films of PANI · MSA and poly(p‐phenylene benzobisthiazole) (PBZT). This process eliminated the need for a subsequent protonation step and had the additional advantage that the conjugated PBZT may provide alternative conducting pathways. Conductivity values of the composite films ranged from 100 pS/cm to 124 S/cm, and the films displayed critical concentration behavior with a PANI threshold concentration of 2.75% and a critical exponent of 4. Transmission electron micrographs displayed phase‐separated regions with PANI forming a continuous network at high concentrations. Thermogravimetric analysis results demonstrated the thermal and thermooxidative stability advantage of the blends due to the PBZT component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2539–2548, 2001     

Ordered Hybrids from Template‐Free Organosilane Self‐Assembly

Despite considerable achievements over the last two decades, nonporous organic–inorganic hybrid materials are mostly amorphous, especially in the absence of solvothermal processes. The organosilane self‐assembly approach is one of the few opportunities for creating a regular assembly of organic and inorganic moieties. Additionally, well‐established organosilicon chemistry enables the introduction of numerous organic functionalities. The synthesis of periodically ordered hybrids relies on mono‐, bis‐, or multisilylated organosilane building blocks self‐assembling into hybrid mesostructures or superstructures, subsequently cross‐linked by siloxane Si‐O‐Si condensation. The general synthesis procedure is template‐free and one‐step. However, three concurrent processes underlie the generation of self‐organized hybrid networks: thermodynamics of amphiphilic aggregation, dynamic self‐assembly, and kinetically controlled sol–gel chemistry. Hence, the set of experimental conditions and the precursor structure are of paramount importance in achieving long‐range order. Since the first developments in the mid‐1990s, the subject has seen considerable progress leading to many innovative advanced nanomaterials providing promising applications in membranes, pollutant remediation, catalysis, conductive coatings, and optoelectronics. This work reviews, comprehensively, the primary evolution of this expanding field of research.     

Organic–inorganic hybrid materials. I. Characterization and degradation of poly(imide–silica) hybrids

Poly(imide–silica) hybrid materials with covalent bonds were prepared by (3-aminopropyl)methyldiethoxysilane (APrMDEOS) terminated amic acid, water, and tetramethoxysilane (TMOS) via a sol–gel technique. Infrared (IR), ²⁹Si and ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA) were used to study hybrids containing various proportions of TMOS and hydrolysis ratios. The microstructure and chain mobility of hybrids were investigated by proton spin–spin relaxation T₂ measurements. The apparent activation energy E_a for degradation of hybrids in air was studied by the van Krevelen method. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2275–2284, 1999     

The use of alumatrane for the preparation of high‐surface‐area nickel aluminate and its activity for CO oxidation

Supported nickel has been used in a wide range of applications for industrial reactions, such as steam reforming, hydrogenation and methanation. In this work, nickel aluminate was prepared by the sol–gel process using alumatrane as the alkoxide precursor, directly synthesized from the reaction of inexpensive and available compounds, aluminum hydroxide and TIS (triisopropanolamine) via the oxide one pot synthesis (OOPS) process. Various conditions of the sol–gel process, such as pH, calcination temperature, hydrolysis ratio and ratio of nickel to aluminum, were studied. All samples were characterized using FTIR, TGA, XRD, TPR, DR‐UV and BET. The BET surface area was in the range of 340–450 m²/g at the calcination temperature of 500 °C with a mesoporous pore size distribution. Catalyst activity testing in CO oxidation reaction depended on Ni:Al ratio and calcination temperature. Higher activity was obtained from higher Ni content and lower calcination temperature. In addition, catalysts prepared using alumatrane precursor had higher percentage conversion than those prepared using aluminum hydroxide precursor. Copyright © 2005 John Wiley & Sons, Ltd.     

One‐Step Electrodeposition to Layer‐by‐Layer Graphene–Conducting‐Polymer Hybrid Films

One‐step fabrication of graphene–polyaniline (graphene–PANI) hybrid film was facilely achieved by cyclic voltammetric electrolysis of a bath containing both graphene oxide (GO) and aniline, where graphene is obtained by electrochemical reduction of GO and PANI is simultaneously obtained by aniline electropolymerization. As there is no strong attraction between aniline and GO under the electrodeposition conditions, the independent depositions of PANI and reduced GO nanosheets at their greatly differed potentials led to alternate layered graphene–PANI films, with the topmost layer being PANI particles or graphene sheets just by changing the initial scan directions. The two kinds of graphene–PANI hybrid films present excellent but different electrical and electrochemical behaviors.     

Polymer–filler interactions in sol–gel derived polymer/silica hybrid nanocomposites

The effect of polymer–filler interaction on solvent swelling and dynamic mechanical properties of the sol–gel derived acrylic rubber (ACM)/silica, epoxidized natural rubber (ENR)/silica, and poly (vinyl alcohol) (PVA)/silica hybrid nanocomposites has been described for the first time. Tetraethoxysilane (TEOS) at three different concentrations (10, 30, and 50 wt %) was used as the precursor for in situ silica generation. Equilibrium swelling of the hybrid nanocomposites in respective solvents at ambient condition showed highest volume fraction of the polymer in the swollen gel in PVA/silica system and least in ACM/silica, with ENR/silica recording an intermediate value. The Kraus constant (C) also followed a similar trend. In dynamic mechanical analysis, the storage modulus dropped at higher strain (>1%), which indicated disengagement of polymer segments from the filler surfaces. This drop was maximum in ACM/silica, intermediate in ENR/silica, and minimum in PVA/silica, both at 50 and 70 °C. The drop in modulus with theoretical volume fraction of silica (ϕ) was interpreted with the help of a Power law model ΔE′ = a₁ϕ, where a₁ was a constant and b₁ was primarily a filler attachment parameter. Strain dependence of loss modulus was observed in ACM/silica hybrid nanocomposites, while ENR/silica and PVA/silica nanocomposites showed almost strain‐independent behavior. The storage modulus showed sharp increase with increasing frequency in ACM/silica system, while that was lower in both ENR/silica (at higher frequency) and PVA/silica systems (in the entire frequency spectrum). The increase in modulus with ϕ also followed similar model ΔE′ = a₂ϕ proposed in the strain sweep mode. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2399–2412, 2005     

Supramolecular Polymer Hydrogels from Bolaamphiphilic L‐Histidine and Benzene Dicarboxylic Acids: Thixotropy and Significant Enhancement of EuIII Fluorescence

Supramolecular polymers from the bolaamphiphilic L ‐histidine ( BolaHis ) and benzene dicarboxylic acids (o‐phthalic acid, OPA ; isophthalic acid, IPA and terephthalic acid, TPA ) were found to form hydrogels although neither of the single components could gel water. It was suggested that the hydrogen bond and ionic interactions among different imidazole and carboxylic acid groups are responsible for the formation of the supramolecular polymer as well as the hydrogel formation. Depending on the structures of the dicarboxylic acids, different behaviors of the gels were observed. The hydrogels from OPA / BolaHis and IPA / BolaHis showed thixotropic properties, that is, the hydrogel was destroyed by hand shaking and then slowly gelated again at room temperature. However, the hydrogels of TPA / BolaHis could not. Interestingly, when Eu^III was doped into IPA / BolaHis supramolecular polymers, very strong luminescence enhancement was observed. FT‐IR spectroscopies and XRD analysis revealed that the strong luminescence enhancement could be attributed to the matched supramolecular nanostructures, which render the correct binding and a good dispersion of Eu^III ions. The work offers a new approach for fabricating functional hydrogels through the supramolecular polymers.     

Stimuli‐Triggered Sol–Gel Transitions of Polypeptides Derived from α‐Amino Acid N‐Carboxyanhydride (NCA) Polymerizations

The past decade has witnessed significantly increased interest in the development of smart polypeptide‐based organo‐ and hydrogel systems with stimuli responsiveness, especially those that exhibit sol–gel phase‐transition properties, with an anticipation of their utility in the construction of adaptive materials, sensor designs, and controlled release systems, among other applications. Such developments have been facilitated by dramatic progress in controlled polymerizations of α‐amino acid N‐carboxyanhydrides (NCAs), together with advanced orthogonal functionalization techniques, which have enabled economical and practical syntheses of well‐defined polypeptides and peptide hybrid polymeric materials. One‐dimensional stacking of polypeptides or peptide aggregations in the forms of certain ordered conformations, such as α helices and β sheets, in combination with further physical or chemical cross‐linking, result in the construction of three‐dimensional matrices of polypeptide gel systems. The macroscopic sol–gel transitions, resulting from the construction or deconstruction of gel networks and the conformational changes between secondary structures, can be triggered by external stimuli, including environmental factors, electromagnetic fields, and (bio)chemical species. Herein, the most recent advances in polypeptide gel systems are described, covering synthetic strategies, gelation mechanisms, and stimuli‐triggered sol–gel transitions, with the aim of demonstrating the relationships between chemical compositions, supramolecular structures, and responsive properties of polypeptide‐based organo‐ and hydrogels.