Multifunctional,water‐soluble,C60‐pendant maleic anhydride copolymer

Starting from the synthesis of a new methanofullerene derivative bearing an alcohol group, we report on the preparation of a water‐soluble, fullerene‐pendant copolymer. This multifunctional, C₆₀‐pendant maleic anhydride copolymer was characterized by conductometric titration, Fourier transform infrared and ultraviolet spectroscopy, thermogravimetric analysis, and cyclic voltammetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5814–5822, 2005     

Synthesis of water‐soluble zwitterionic polysiloxanes

A series of water‐soluble siloxane polymers with pendent phosphorylcholine (PC) and sulfobetaine (SB) zwitterions was prepared using thiol‐ene “click” chemistry. Specifically, well‐defined vinyl‐substituted siloxane homopolymers and block copolymers were functionalized with small molecule zwitterionic thiols at room temperature. Rapid and quantitative substitution of the pendent vinyl groups was achieved, and zwitterionic polysiloxanes of narrow molecular weight distribution were obtained. The PC‐ and SB‐substituted polymers were found to be readily soluble in pure, salt‐free water. Critical micelle concentrations (CMCs) of these polymers in water were measured using a pyrene fluorescence probe, with CMC values estimated to be <0.01 g/L. Polymer aggregates were studied by dynamic light scattering, and the micelles generated from the PC block copolymers were visualized, after drying, by transmission electron microscopy. Aqueous solutions of these zwitterionic polysiloxanes significantly reduced the oil‐water interfacial surface tension, functioning as polymer amphiphiles that lend stability to oil‐in‐water emulsions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 127–134     

Synthesis and characterization of water‐soluble barbiturate‐ and thiobarbiturate‐functionalized polystyrene

The synthesis and characterization of barbiturate‐ and thiobarbiturate‐functionalized polystyrene from polystyrene homopolymer by polymer‐modification reactions is discussed. Polystyrene homopolymer quantitatively functionalized at the para postion with diethyl oxomalonate functionality was subjected to a condensation reaction with urea and thiourea in the presence of sodium methoxide in methanol. This reaction proceeded essentially to quantitative conversion to the barbiturate‐ (BAPS) and thiobarbiturate‐functionalized polystyrenes (TBAPS) as estimated by ¹H NMR, UV, and IR spectroscopies. Thus, several copolymers of styrene with barbiturate‐ and thiobarbiturate‐functionalized styrene were synthesized. The detailed characterizations of quantitatively functionalized polystyrene using gel permeation chromatographic, IR, UV, and ¹H NMR spectroscopic techniques as well as thermogravimetric analysis are discussed. An application of the newly synthesized polymer in removing Cu(II) ions from aqueous solution is demonstrated. This is the first report on the synthesis of BAPS and TBAPS by the polymer‐modification route or otherwise. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 731–737, 2002; DOI 10.1002/pola.10154     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Hydrogen bonding and hydrophobic interactions between [60]fullerenated poly(2‐hydroxyethyl methacrylate) and poly(1‐vinylimidazole) or poly(4‐vinylpyridine)

Miscible blends of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(1‐vinylimidazole) (PVI) have been formed in methanol/water (3/2 v/v) solutions. The incorporation of 0.6 wt % C₆₀ into PHEMA leads to hydrophobic interactions and enhanced hydrogen bonding in miscible blends of [60]fullerenated poly(2‐hydroxyethyl methacrylate) (FPHEMA) with PVI. The incorporation of 2.6 wt % C₆₀ into PHEMA increases its tendency to form interpolymer complexes with PVI. Interpolymer complexes are formed when FPHEMA samples containing 0.6, 1.4, and 2.6 wt % C₆₀ are blended with poly(4‐vinylpyridine). The yields of the complexes increase with increasing C₆₀ content in FPHEMA. Calorimetry and Fourier transform infrared spectroscopy studies suggest the importance of hydrophobic interactions in C₆₀‐containing blends and complexes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4316–4327, 2002     

Synthesis and miscibility studies of [60]fullerenated poly(2‐hydroxyethyl methacrylate)

[60]Fullerenated poly(2‐hydroxyethyl methacrylate)s containing 0.6–3.0 wt % C₆₀ were synthesized. These polymers are soluble in methanol and N,N‐dimethylformamide (DMF). [60]Fullerenated poly(2‐hydroxyethyl methacrylate)s with higher C₆₀ contents are only sparingly soluble in DMF and virtually insoluble in other organic solvents. A loading of 1.2 wt % C₆₀ in poly(2‐hydroxyethyl methacrylate) does not greatly affect its miscibility with poly(N‐vinyl‐2‐pyrrolidone), poly(1‐vinylimidazole), and poly(4‐vinylpyridine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1157–1166, 2002     

Functional dye as a comonomer in a water‐soluble polymer

In many applications, a functional additive is blended into a polymer matrix to enhance its properties. However, when the polymer and functional additive are applied to a surface, the functional molecule may be easily lost. In favorable cases, it may be possible to incorporate the additive directly into the polymer as a comonomer. In this study, a functionalized polymer has been obtained through the combination of linking a photodynamic, antimicrobial dye, Rose Bengal, to vinyl benzyl chloride via etherification and then polymerizing this into a water‐soluble polymer using chain growth copolymerization. Characterization of the efficiency of synthesis, solubility of the final product, and singlet oxygen production rate has been performed. Dialysis was used to determine the extent of incorporation of the dye into the polymer. The chemical structure of the intermediate produced through etherification has been verified. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1594–1599     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Modification of carboxyl‐functionalized single‐walled carbon nanotubes with biocompatible,water‐soluble phosphorylcholine and sugar‐based polymers: Bioinspired nanorods

We report here the successful functionalization of single‐walled carbon nanotubes with bioinspired sugar and phosphocholine polymeric structures via surface‐initiated atom transfer radical polymerization. The surface‐polymer‐coated carbon nanotubes have been systematically analyzed by Raman, infrared, ultraviolet–visible, and nuclear magnetic resonance spectroscopy and high‐resolution transmission electron microscopy, which give strong evidence of successful functionalization. The successful aqueous dispersion of the functionalized carbon nanotubes also indicates that functionalization has been achieved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6558–6568, 2006     

Synthesis and characterization of star polyfluorenes with a C60 core

C60‐cored star polyfluorenes were synthesized and fully characterized. A high yield (81%) hexakisaddition of C60 was developed by using Prato reaction and bulky fluorene addends. Suzuki polycondensation of the hexakisadducts of C60 carrying six 2‐bromofluorene addends and AB‐type monomer (2‐bromo‐9,9‐dioctylfluorenyl‐4,4,5,5‐tetramethyl‐ [1,3,2]‐dioxaborane) with Pd(PPh₃)₄ as the catalyst precursor afforded the desired C60‐cored star polyfluorenes. Their three‐dimensional structure can effectively reduce the aggregation of the polyfluorene chains. Annealing studies indicated that the C60‐cored star polyfluorenes are of good color stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4696–4706, 2007     

Synthesis of ω‐fluorenyl‐functionalized soluble polyphenylene: influence of polymer chain structure on photoluminescence quenching

The influence of the polymer chain structure of soluble polyphenylene (SPP) on the photoluminescence (PL) quenching of fluorene is strongly affected by the 1,2‐phenylene (1,2‐Ph)/1,4‐phenylene (1,4‐Ph) unit molar ratios of SPP, and the amount of 1,4‐Ph units is a major factor for PL quenching. The addition of the fluorenyl group by the formation of carbon–carbon bond at the polymer chain end of SPP is also an important factor for PL quenching of fluorene. Charge (electron) transfer from the fluorenyl end‐group to the main chain of ω‐fluorenyl‐functionalized SPP (FL‐SPP) was very efficient. UV/Vis and PL spectra suggested that this FL‐SPP may be useful for preparing an effective polymer photocell. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of fluorene‐based low‐band gap copolymers containing propylenedioxythiophene and benzothiadiazole derivatives for bulk heterojunction photovoltaic cell applications

The following noble series of soluble π‐conjugated statistical copolymers was synthesized by palladium catalyzed Suzuki polymerization: poly[(9,9‐dioctylfluorene)‐alt‐(4,7‐bis(3′,3′‐dihepyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole)] (PFO‐PTBT) derived from poly(9,9‐dioctylfluorene) (PFO) and poly[(4,7‐bis(3′,3′‐dihepyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole)] poly(heptyl₄‐PTBT). The structure and properties of these polymers were characterized using ¹H‐, ¹³C‐NMR, UV–visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PFO‐PTBT (9:1, 8.4:1.6, 6.5:3.5), were soluble in common organic solvents and easily spin coated onto indium‐tin oxide (ITO) coated glass substrates. The weight‐average molecular weight (M_w) and polydispersity of the PFO‐PTBT ranged from (1.0–4.2) × 10⁴ and 1.5–2.3, respectively. Bulk heterojunction photovoltaic cells with an ITO/PEDOT/PFO‐PTBT:PCBM/LiF/Al configuration were fabricated, and the devices using PFOPTBT (6.5:3.5) showed the best performance compared with those using PFO‐PTBT (9:1, 8.4:1.6). A maximum power conversion efficiency (PCE) of 0.50% (V_oc = 0.66 V, FF = 0.29) was achieved with PFO‐PTBT (6.5:3.5). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6175–6184, 2008     

Heterogeneous “Organoclick” Derivatization of Polysaccharides: Photochemical Thiol‐ene Click Modification of Solid Cellulose

A simple and direct method for derivatization of solid polysaccharides is presented. The novel methodology is based on the combination of organic acid‐catalyzed esterification or etherification and photochemical thiol‐ene click derivatization of a heterogeneous polysaccharide. The solid cellulose was “organoclick” modified with aryl, alkyl and polyester groups, respectively. The modification allows for a highly modular and metal free surface modification of solid polysaccharides.

     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of poly(isobutylene‐co‐isoprene)‐derived macro‐monomers

Allylic halide displacement from brominated poly(isobutylene‐co‐isoprene) (BIIR) by carboxylate nucleophiles is used to prepare elastomer derivatives containing pendant polymerizable functionality. These solvent‐borne substitutions are conducted under homogeneous and phase‐transfer catalyzed reaction conditions to synthesize acrylate and vinylbenzoate esters in high yield. The resulting macro‐monomer derivatives are shown to crosslink efficiently with peroxide initiation to give high modulus, thermoset products that cannot otherwise be accessed from isobutylene‐rich elastomers. The extent of cure, as measured by the storage modulus of the vulcanizate, scales with RCH=CH₂ content, and can be extended by co‐oligomerization of pendant unsaturation with that contained within multifunctional coagents. An alternate approach involving the introduction of pendant sulfonyl azide functionality is described, wherein thermal decomposition to nitrene intermediates supports an efficient crosslinking process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Comparative study of 2‐amino and 3‐aminobenzoic acid copolymerization with aniline synthesis and copolymer properties

Polyanilines soluble in an aqueous basic medium were synthesised by copolymerization of aniline (ANI) with both 2 and 3‐aminobenzoic acids (ABA). Different composition copolymers were prepared by varying the ANI/ABA feed ratio. Poly(aniline‐co‐2‐aminobenzoic acid) (PANI2ABA) and poly(aniline‐co‐3‐aminobenzoic acid) (PANI3ABA) displayed differences in their properties, such as specific charge and fluorescence behavior because the reactivity of 2‐aminobenzoic (2ABA) and 3‐aminobenzoic (3ABA) acids are very different. The new materials were characterized by X‐ray photoelectron, Fourier transform infrared, and Raman spectroscopies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5587–5599, 2004     

Functionalization and molecular dynamics study of carboxy‐terminated poly(1‐vinylpyrrolidin‐2‐one): A potential soluble carrier of biomolecules

The reactivity of carboxy‐terminated poly(1‐vinylpyrrolidin‐2‐one) (PVP‐COOH) 40‐mers 1 with various small bi‐functionalized molecules has been investigated. A number of new differently functionalized PVP 3–11 have been successfully obtained demonstrating that the presence of the bulky PVP chain did not hamper the reactivity of the carboxy group. This would imply that in solution the carboxyl group is not buried inside the coil, but well exposed to the solvent, as further confirmed by a molecular dynamics conformational study. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1683–1698, 2008     

Synthesis of ω‐anthracenyl‐functionalized soluble polyphenylene: effect of the end‐group on optical and electrical properties

ω‐Anthracenyl‐functionalized soluble polyphenylene (AN‐SPP) with a well‐controlled polymer chain was synthesized. The optical and electrical properties were strongly affected by the anthracenyl end‐group. The UV absorption and photoluminescence emission were enhanced and shifted toward the longer wavelength region in comparison to that of soluble polyphenylene. The optical band gap energies of the main chain and the anthracenyl end‐group were 3.15 and 3.89 eV, respectively. The highest occupied molecular orbital/lowest unoccupied molecular orbital energy levels of the main chain and the anthracenyl end‐group of AN‐SPP were ?4.98/?1.81 eV and ?7.25/?3.36 eV, respectively. The current–voltage characteristics of AN‐SPP were controllable by the presence of the anthracenyl end‐group. Copyright © 2008 John Wiley & Sons, Ltd.