Crystalline β‐structure of PHBV grown epitaxially on silicate layers of MMT

The poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/montmorillonite(MMT) nanocomposites were investigated by wide‐angle X‐ray scattering (WAXS). The aim of the investigation was solution intercalation of MMT with PHBV. Beside the usual orthorhombic unit cell, a stable pseudohexagonal β‐structure of PHBV was obtained. Well known β‐structure has one common WAXS reflection (d = 0.480 nm), which corresponds to the mean distance of PHBV chains in the pseudohexagonal structure. The new β‐structure has two diffraction peaks in the WAXS pattern. It is a three‐dimensionally ordered crystalline structure oriented in parallel with the silica layers of MMT. The new polymorphic form is supposed to be growing on the layers of MMT. Its layers serve as primary nucleation centers for epitaxial growth of the β‐structure. After annealing, this polymorphic form of PHBV disappears and it is transformed into the more stable α‐form leading to an enhanced total crystallinity of the polymer comprised in the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 751–755, 2009     

Theoretical Study Of β2,3‐Peptide Models

Conformational features of α,β‐disubstituted β^2,3‐dipeptide models have been studied with quantum mechanics method. Geometries were optimized with the HF/6‐31G** method, and energies were evaluated with the B3LYP/6‐31G** method. Solvent effect was evaluated with the SCIPCM method. For (2S,3S)‐β^2,3‐dipeptide model 1 , a six‐membered‐ring hydrogen bonded structure is most stable. However, the conformation corresponding to the formation of the 14‐helix is only about 1.7 kcal/mol less stable in methanol solution, indicating that the 14‐helix is favored if a (2S,3S)‐β^2,3‐polypeptide contains more than 5 residues. On the other hand, the conformation corresponding to the formation of β‐sheet is most stable for (2R,3S)‐β^2,3‐dipeptide model 2 , suggesting that this type of β‐peptides is intrinsically favored for the formation of β‐sheet secondary structure.     

Quantum mechanical studies on model α‐pleated sheets

Pauling and Corey proposed a pleated‐sheet configuration, now called α‐sheet, as one of the protein secondary structures in addition to α‐helix and β‐sheet. Recently, it has been suggested that α‐sheet is a common feature of amyloidogenic intermediates. We have investigated the stability of antiparallel β‐sheet and two conformations of α‐sheet in solution phase using the density functional theoretical method. The peptides are modeled as two‐strand acetyl‐(Ala)₂‐N‐methylamine. Using stages of geometry optimization and single point energy calculation at B3LYP/cc‐pVTZ//B3LYP/6‐31G* level and including zero‐point energies, thermal, and entropic contribution, we have found that β‐sheet is the most stable conformation, while the α‐sheet proposed by Pauling and Corey has 13.6 kcal/mol higher free energy than the β‐sheet. The α‐sheet that resembles the structure observed in molecular dynamics simulations of amyloidogenic proteins at low pH becomes distorted after stages of geometry optimization in solution. Whether the α‐sheets with longer chains would be increasingly favorable in water relative to the increase in internal energy of the chain needs further investigation. Different from the quantum mechanics results, AMBER parm94 force field gives small difference in solution phase energy between α‐sheet and β‐sheet. The predicted amide I IR spectra of α‐sheet shows the main band at higher frequency than β‐sheet. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Impact of Strand Number on Parallel β‐Sheet Stability

We have examined whether parallel β‐sheet secondary structure becomes more stable as the number of β‐strands increases, via comparisons among peptides designed to adopt two‐ or three‐stranded parallel β‐sheet conformations in aqueous solution. Our three‐strand design is the first experimental model of a triple‐stranded parallel β‐sheet. Analysis of the designed peptides by nuclear magnetic resonance (NMR) and circular dichroism (CD) spectroscopy supports the hypothesis that increasing the number of β‐strands, from two to three, increases the stability of the parallel β‐sheet. We present the first experimental evidence for cooperativity in the folding of a triple‐stranded parallel β‐sheet, and we show how minimal model systems may enable experimental documentation of characteristic properties, such as CD spectra, of parallel β‐sheets.     

Characterization of poly(vinylidene fluoride)/Na+‐MMT composites: An investigation into the β‐crystalline nucleation effect of Na+‐MMT

Poly(vinylidene fluoride)(PVDF)/Na⁺‐MMT composites have been successfully prepared utilizing sodium montmorillonite (Na⁺‐MMT) via N,N‐dimethylformamide (DMF) solution mixing. The dispersion of Na⁺‐MMT layers in composites were investigated by transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The effect of adding Na⁺‐MMT on crystallization behavior of PVDF was specifically studied. The β‐crystalline nucleation effect of Na⁺‐MMT was investigated and confirmed by differential scanning calorimetry (DSC), XRD, and Fourier transform infrared (FTIR) results. The interaction between PVDF and the surface of Na⁺‐MMT layers in DMF solution was confirmed by UV‐Vis absorbency. The effect of adding Na⁺‐MMT on rheological and electrical properties of PVDF/Na⁺‐MMT composites were also determined. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 903–911, 2009     

Concentration‐dependent conformation transition of regenerated silk fibroin induced by graphene oxide nanosheets incorporation

Regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite has been substantially investigated due to its significant multifunctional potential. Here, in combination of micromorphology, crystalline conformation, dynamic mechanical property characterization, and Fourier self‐deconvolution (FSD) quantitative analysis, we investigated the RSF molecular chains conformation transition induced by GO nanosheet incorporation, and its influence on the structural and mechanical properties of solution casted RSF/GO composite films. The GO nanosheet promoted the silk fibroin molecular chains conformation transition from random coil to β‐sheet structure, and a correlation between β‐sheet structure fraction and GO concentration was revealed. The β‐sheet structure fraction increases further improved the dynamic mechanical property of composite films. Moreover, based on nucleation‐dependent aggregation of silk fibroin molecular chains, a mechanism considering the competition effect between GO concentration and its total surface area was proposed to explain the observed concentration‐dependent conformation transition phenomenon. The study improves our understanding on silk fibroin conformation transition process in RSF/GO composite and would provide a valuable reference for the rational design of bioinspired multifunctional materials with enhanced mechanical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1506–1515     

Selective 17‐β‐estradiol molecular imprinting

An efficient novel method for the synthesis of a covalent molecularly imprinted polymer (MIP) highly specific to β‐estradiol have been developed. MIP prepared by both covalent and non covalent techniques, demonstrated high selectivity toward β‐estradiol. MIPs were synthesized by radical polymerization of 17‐β‐estradiol 4‐vinyl‐benzene carboxyl or sulfonyl esters used as covalent functional monomers, methacrylic acid as noncovalent functional monomer, ethylene glycol dimethacrylate as crosslinking agent, and acetonitrile as swelling and porogenic component. Almost 35% (w/w) of 17‐β‐estradiol was successfully removed from the polymer network by basic hydrolysis. The binding ability of MIP was 10.73 μg/mg MIP following removal of 17‐β‐estradiol in the 2 mg/mL β‐estradiol solution. Selective rebinding of β‐estradiol toward MIP was tested in the presence of competitive binders including estrone, 19‐nortestosterone, epiandrosterone, and cholesterol. Estrone having closest similar chemical structure to β‐estradiol exhibited only 0.6 μg/mg MIP competitive binding, being exposed to equivalent concentrations. Moreover, other competitive steroids demonstrated negligible affinity toward MIP indicating high selectivity of novel MIP system toward β‐estradiol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5534–5542, 2009     

A novel silk‐based segmented block copolymer containing GlyAlaGlyAla β‐sheets templated by phenoxathiin

A novel segmented block copolymer, containing polyethylene glycol segment and GlyAlaGlyAla sequence derived from B. mori silk, has been prepared as a model for silk‐based materials using both solution and interfacial techniques. Inherent viscosity, size exclusion chromatography, and light‐scattering measurements gave molecular weight between M_w 34,000–39,000. Evidence for phase separation was provided by differential scanning calorimetry, which gave two T_g's at −57 °C and 111 °C, and transmission electron microscopy, which showed a morphology in which the peptide domain, estimated to be about 20–50 nm, was dispersed in the continuous polyether phase. Solid‐state FTIR spectroscopic results showed that the polymer contained both parallel and antiparallel β‐sheet stacks, and that the solution‐polymerized material has the higher β‐sheet content. This was further confirmed by ¹³C NMR, which gave about 80% total β‐sheet content for the solution‐polymerized product and about 40% for the polymer obtained by interfacial polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 352–366, 2000     

Polymorphism behavior of poly(ethylene naphthalate)/clay nanocomposites

Thermally stable organically modified clays based on 1,3‐didecyl‐2‐methylimidazolium (IM2C10) and 1‐hexadecyl‐2,3‐dimethyl‐imidazolium (IMC16) were used to prepare poly(ethylene naphthalate) (PEN)/clay nanocomposites via a melt intercalation process. The clay dispersion in the resulting hybrids was studied by a combination of X‐ray diffraction, polarizing optical microscopy, and transmission electron microscopy. It was found that IMC16 provided better compatibility between the PEN matrix and the clay than IM2C10, as evidenced by some intercalation of polymer achieved in the PEN/IMC16‐MMT hybrid. The effects of clay on the crystal structure of PEN were investigated. It was found that both pristine MMT and imidazolium‐treated MMT enhanced the formation of the β‐crystal phase under melt crystallization at 200 °C. At 180 °C, however, the imidazolium‐treated MMT was found to favor the α‐crystal form instead. The difference in clay‐induced polymorphism behavior was attributed to conformational changes experienced by the clay modifiers as the crystallization temperature changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1040–1049, 2006     

pH‐Controlled Formation of a Stable β‐Sheet and Amyloid‐like Fibers from an Amphiphilic Peptide: The Importance of a Tailor‐Made Binding Motif for Secondary Structure Formation

The new amphiphilic peptide 1 is composed of alternating cyclohexyl side chains and guanidiniocarbonyl pyrrole (GCP) groups. In contrast to analogue 2 , which contains lysine instead of the GCP groups and only exists as a random coil owing to charge repulsion, peptide 1 forms a stable β‐sheet at neutral pH in aqueous medium. The weakly basic GCP groups (pK_a≈7) are key for secondary structure formation as they stabilize the β‐sheet through mutual interactions (formation of a “GCP zipper”). The β‐sheets further aggregate into left‐handed helically twisted fibers. However, β‐sheet formation is completely reversible as a function of pH. At low pH (ca. 4), peptide 1 is unstructured (random coil) as all GCP units are protonated. Only round colloidal particles are observed. The amyloid nature of the fibers formed at neutral pH was confirmed by staining experiments with Congo Red and thioflavin T. Furthermore, at millimolar concentrations, peptide 1 forms a stable hydrogel.     

Polypeptide‐based nanocomposite: Structure and properties of poly(L‐lysine)/Na+‐montmorillonite

The feasibility of constructing polymer/clay nanocomposites with polypeptides as the matrix material is shown. Cationic poly‐L‐lysine · HBr (PLL) was reinforced by sodium montmorillonite clay. The PLL/clay nanocomposites were made via the solution‐intercalation film‐casting technique. X‐ray diffraction and transmission electron microscopy data indicated that montmorillonite layers intercalated with PLL chains coexist with exfoliated layers over a wide range of relative PLL/clay compositions. Differential scanning calorimetry suggests that the presence of clay suppresses crystal formation in PLL relative to the neat polypeptide and slightly decreases the PLL melting temperature. Despite lower crystallinity, dynamic mechanical analysis revealed a significant increase in the storage modulus of PLL with an increase in clay loading producing storage modulus magnitudes on par with traditional engineering thermoplastics. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2579–2586, 2002     

Preferential formation of electroactive crystalline phases in poly(vinylidene fluoride)/organically modified silicate nanocomposites

The role of organically modified silicate (OMS), Lucentite STN on the formation of β‐crystalline phase of poly(vinylidene fluoride) (PVDF) is investigated in the present study. The OMS was solution blended with PVDF and cast on glass slide to form PVDF‐OMS nanocomposites. Solution cast samples were subjected to various thermal treatments including annealing (AC‐AN), melt‐quenching followed by annealing (MQ‐AN), and melt‐slow cooling (MSC). Fourier‐transform infrared spectroscopy (FT‐IR), wide angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC) were used to investigate the crystalline structure of thermally treated samples. As a special effort, the combination of in situ thermal FT‐IR, WAXD, and DSC studies was utilized to clearly assess the thermal properties. FT‐IR and WAXD results of MQ‐AN samples revealed the presence of β‐phase of PVDF. Ion‐dipole interaction between the exfoliated clay nanolayers and PVDF was considered as a main factor for the formation of β‐phase. Melt‐crystallization temperature and subsequent melting point were enhanced by the addition of OMS. Solid β‐ to γ‐crystal phase transition was observed from in situ FT‐IR and WAXD curves when the representative MQ‐AN sample was subjected to thermal scanning. Upon heating, β‐phase was found to disappear through transformation to the thermodynamically stable γ‐phase rather than melting directly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2173–2187, 2008     

Three different β‐cyclodextrins direct the emulsion copolymerization of a highly fluorinated methacrylate toward distinctive nanostructured particle morphologies

Stable colloidal dispersions of nanostructured semifluorinated acrylic particles with an unfluorinated core and an outer layer consisting of copolymers of the highly hydrophobic and lipophobic heptadecafluorodecyl methacrylate (FMA) were successfully synthesized with the assistance of three different cyclodextrins as phase‐transfer catalysts: β‐cyclodextrin (β‐CD), hydroxypropyl β‐cyclodextrin (HpCD), and methyl β‐cyclodextrin (MeCD). While all the cyclodextrins form a stable inclusion complex (IC) with FMA, only the ICs with the more hydrophilic HpCD and MeCD are soluble in water. Nevertheless, incorporation of FMA in the particle shell copolymer could be achieved also when using β‐CD. On the other hand, the morphology of the nanostructured particles was characterized by a “patchy” fluorinated shell dependent on the cyclodextrin used, the best results being obtained with MeCD. A monomer‐starved semicontinuous emulsion polymerization procedure was essential to favor the CD‐mediated incorporation of FMA into the copolymer structure and to achieve a stable colloidal dispersion even in the presence of small amounts of mixed anionic–nonionic surfactants. The thermal and surface properties of the latex films showed a good correlation with the shell composition and patchy nanostructured morphology of the particles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Formation mechanism of polyaniline microtubules synthesized by a template‐free method

A template‐like model, which was an aniline salt formed with β‐naphthalene sulfornic acid (β‐NSA) as a dopant, was proposed to interpret the formation mechanism of polyaniline (PANI) microtubules doped with β‐NSA by a template‐free method. Scanning electron microscope (SEM) and X‐ray diffraction measurements confirmed this model. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2359–2364, 2000     

Nonisothermal crystallization behavior of syndiotactic polystyrene/montmorillonite nanocomposites

X‐ray diffraction methods and differential scanning calorimetry were used to investigate the crystalline structure and crystallization kinetics of syndiotactic polystyrene (sPS)/clay nanocomposites. X‐ray diffraction data showed the presence of polymorphism in sPS/montmorillonite (MMT) nanocomposites, which was strongly dependent on the processing conditions (premelting temperature and cooling rate) of the sPS/MMT nanocomposites and on the content of MMT in the sPS/MMT nanocomposites. The α‐crystalline form could be transformed into β‐crystalline forms at higher premelting temperatures. The nonisothermal melt‐crystallization kinetics and melting behavior of the sPS/MMT nanocomposites were also studied at various cooling rates. The correlation of the crystallization kinetics, melting behavior, and crystalline structure of the sPS/MMT nanocomposites was examined. The results indicated that the addition of a small amount of MMT to sPS caused a change in the mechanism of nucleation and the crystal growth of the sPS crystallite. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 560–570, 2003     

Probing into the epitaxial crystallization of β form isotactic polypropylene: From experimental observations to molecular mechanics computation

Compared with the most stable crystalline form of isotactic polypropylene (α‐iPP), β‐iPP shows superior impact strength and high temperature performance, though the mechanism of how the frustrated structure of β‐iPP is formed still remains unclear. In present work, the single crystal structure of a traditional β‐iPP nucleating agent, N,N′‐dicyclohexylterephthalamide (DCHT), was obtained for the first time and correlated with the epitaxial crystallization of β‐iPP on the surface of DCHT crystal. The combination of synchrotron radiation X‐ray microdiffraction and molecular chain packing model confirmed that a two dimensional match of chain‐axis and inter‐chain direction coexists between β‐iPP (110) plane and DCHT (001) plane. It was further found that an epitaxial model is helpful to understand the formation of the frustrated structure of 3₁ helices packing in β‐iPP. The molecular mechanics computation showed that as the (001) plane of DCHT is fixed, the packing mode of β‐iPP (110) plane on the substrate surface is more stable than that of α‐iPP (010) plane. This work clarifies the epitaxial crystallization mechanism of β‐iPP on DCHT by employing both experimental and computational evidences. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 418–424     

Influence of oriented β‐lamellae on deformation and pore formation in β‐nucleated polypropylene

Four β‐nucleated polypropylene samples with increasing die draw ratio (DDR) were prepared to modify lamellae arrangement. The DSC, SEM, and 2D‐XRD results show that all four cast films had similar crystallinity, high contents of β‐crystal but lowering stability of β‐lamellae with ascending DDR. Meanwhile, the anisotropy of β‐lamellae distribution strengthens gently and the stacked lamellae structure perpendicular to the machine direction (MD) predominates dramatically. Tensile testing at 25 °C and 90 °C were conducted along MD and transverse direction (TD), respectively. The markedly expanding difference of deformation indicates the anisotropy highlighted significantly. Additionally, when the samples stretched along MD, a more homogeneous deformation occurs with ascending anisotropy, which is completely opposite to the β‐lamellae stability. But samples deformed more heterogeneous when stretched along TD. The characterization of morphological evolutions during stretching shows that the stacked lamellae debonds uniformly and abundant microvoids formed when the sample stretched along MD with higher anisotropy, resulting in evenly dispersion of stress, consequently making a more uniform distribution of defects and a better isotropic deformation. Moreover, the microfibrils and defects distributed uniformly within higher orientation sample after longitudinal stretching stretched along MD, leading to the dramatic improvement of pore size distribution of the membrane after biaxial stretching. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1745–1759     

Investigation on the individual contributions of N?H···OC and C?H···OC interactions to the binding energies of β‐sheet models

In this article, the binding energies of 16 antiparallel and parallel β‐sheet models are estimated using the analytic potential energy function we proposed recently and the results are compared with those obtained from MP2, AMBER99, OPLSAA/L, and CHARMM27 calculations. The comparisons indicate that the analytic potential energy function can produce reasonable binding energies for β‐sheet models. Further comparisons suggest that the binding energy of the β‐sheet models might come mainly from dipole–dipole attractive and repulsive interactions and VDW interactions between the two strands. The dipole–dipole attractive and repulsive interactions are further obtained in this article. The total of N? H···H? N and C?O···O?C dipole–dipole repulsive interaction (the secondary electrostatic repulsive interaction) in the small ring of the antiparallel β‐sheet models is estimated to be about 6.0 kcal/mol. The individual N? H···O?C dipole–dipole attractive interaction is predicted to be ?6.2 ± 0.2 kcal/mol in the antiparallel β‐sheet models and ?5.2 ± 0.6 kcal/mol in the parallel β‐sheet models. The individual C^α? H···O?C attractive interaction is ?1.2 ± 0.2 kcal/mol in the antiparallel β‐sheet models and ?1.5 ± 0.2 kcal/mol in the parallel β‐sheet models. These values are important in understanding the interactions at protein–protein interfaces and developing a more accurate force field for peptides and proteins. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Fine structure of PVDF nanofiber fabricated by electrospray deposition

The fine structure of poly(vinylidene fluoride) (PVDF) nanofiber prepared by electrospray deposition (ESD) has been investigated by wide angle X‐ray diffraction (WAXD) and infrared spectroscopy (IR). The β‐phase crystal was dominant in the crystalline region. The degree of crystallinity of 0.54 for the nanofiber, determined by Ruland's method, was almost identical to that for a melt pressed sheet of PVDF. The disorder parameter k was 4, which is significantly smaller than the value of 6 for the melt pressed sheet of PVDF. Molecular orientation along the fiber axis was observed by the polarized infrared spectra of the uniaxially aligned nanofiber. These results suggest that the PVDF nanofiber possesses a fiber structure which is by no means inferior to that of practical fibers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 558–563, 2008     

Correlations between microstructure of α‐row nuclei and polymorphism of shear‐induced iPP/carbon fiber cylindrite

Herein, we reported the formation mechanism of hybrid crystalline (cylindrite) in isotactic polypropylene (iPP)/carbon fiber (CF) via pulling a CF within the iPP melt. The α‐row nuclei layer closely attached to the surface of CF acts as a self‐nucleation site, rather than a heterogeneous nucleation one, to grow cylindrites. As a result, the polymorphic feature of iPP/CF cylindrite is significantly influenced by the microstructure of α‐row nuclei. With decreasing crystallization temperature (T_c), the polymorphic cylindrite changes from pure α‐form to mixed α‐/β‐form and to β‐rich form. The main characteristics of this change include: (a) the outlines of α‐row nuclei layer correspond to wave‐like, saw‐like, and straight lines; (b) the orientation level of iPP molecules in the α‐row nuclei layer become higher; (c) the α‐lamellae rearrange from loose to compact; and (d) the distance between the growth sites of β‐sectors and the surface of CF is evidently longer than in the case of α‐sectors. Moreover, this study provides a guideline for developing the interfacial enhanced iPP/CF composites through manipulation of polymorphic structure in cylindrites. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 368–377