共查询到20条相似文献,搜索用时 15 毫秒
1.
Lei Gao Ke Zhang Bo Peng Yi Shi Yongming Chen 《Journal of Polymer Science.Polymer Physics》2012,50(5):323-327
We report manipulation of polymer nano‐objects by changing solvents through chemically crosslinking the spherical micelles of poly(3‐(triethoxysilyl)propyl methacrylate)‐block‐polystyrene‐block‐poly(2‐vinylpyridine) (PTEPM‐b‐PS‐b‐P2VP). In methanol, which is a common solvent of PTEPM and P2VP but poor of PS, PTEPM‐b‐PS‐b‐P2VP forms micelles with a PS core. When changing the medium into acidic water, the PTEPM segments further collapse and gelate to form a crosslinked shell outside of the PS core. When the particles are re‐dispersed into tetrahydrofuran (THF), the PS segments are extracted out, producing uniform small cavity of few nanometers in each particle. Thus one sample can be used to generate well‐defined nano‐objects with different appearance by solvent manipulation. The particle structure development has been characterized by transmission electron microscope (TEM), DLS, and 1H NMR. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012 相似文献
2.
We have studied the self‐assembly of the ABA triblock copolymer (P4VP‐b‐PS‐b‐P4VP) in dilute solution by using binary block‐selective solvents, that is, water and methanol. The triblock copolymer was first dissolved in dioxane to form a homogeneous solution. Subsequently, a given volume of selective solvent was added slowly to the solution to induce self‐assembly of the copolymer. It was found that the copolymer (P4VP43‐b‐PS366‐b‐P4VP43) tended to form spherical aggregate or bilayer structure when we used methanol or water as the single selective solvent, respectively. However, the aggregates with various nanostructures were obtained by using mixtures of water and methanol as the block‐selective solvents. The aggregate structure changed from sphere to rod, vesicle, and then to bilayer by changing water content in the block‐selective solvent from 0 to 100%. Moreover, it was found that the vesicle size could be well controlled by changing the copolymer content in the solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1536–1545, 2008 相似文献
3.
Yan Huang Huaqiang Cai Ting Yu Xiuli Sun Dr. Bo Tu Dr. Dongyuan Zhao Prof. Dr. 《化学:亚洲杂志》2007,2(10):1282-1289
A series of highly ordered mesoporous carbonaceous frameworks with diverse symmetries have been successfully synthesized by using phenolic resols as a carbon precursor and mixed amphiphilic surfactants of poly(ethylene oxide)‐b‐poly(propylene oxide)‐b‐poly(ethylene oxide) (PEO–PPO–PEO) and reverse PPO–PEO–PPO as templates by the strategy of evaporation‐induced organic–organic self‐assembly (EISA). The transformation of the ordered mesostructures from face‐centered (Fd m) to body‐centered cubic (Im m), then 2D hexagonal (P6mm), and eventually to cubic bicontinuous (Ia d) symmetry has been achieved by simply adjusting the ratio of triblock copolymers to resol precursor and the relative content of PEO–PPO–PEO copolymer F127, as confirmed by small‐angle X‐ray scattering (SAXS), transmission electron microscopy (TEM), and nitrogen‐sorption measurements. The blends of block copolymers can interact with resol precursors and tend to self‐assemble into cross‐linking micellar structures during the solvent‐evaporation process, which provides a suitable template for the construction of mesostructures. The assembly force comes from the hydrogen‐bonding interactions between organic mixed micelles and the resol‐precursor matrix. The BET surface area for the mesoporous carbonaceous samples calcined at 600 °C under nitrogen atmosphere is around 600 m2 g?1, and the pore size can be adjusted from 2.8 to 5.4 nm. An understanding of the organic–organic self‐assembly behavior in the mixed amphiphilic surfactant system would pave the way for the synthesis of mesoporous materials with controllable structures. 相似文献
4.
R. Nagarajan 《Colloids and surfaces. B, Biointerfaces》1999,16(1-4):55-72
Pluronic® block copolymers are commercially available symmetric triblock copolymers with poly(ethylene oxide), PEO, as the hydrophilic end blocks and poly(propylene oxide), PPO, as the hydrophobic middle block. In this paper, the solubilization of hydrocarbons by aggregates of Pluronic® block copolymers in water is examined in the framework of a simple molecular theory of solubilization. The aggregates have an inner core region made up of PPO and the solubilizate and an outer corona region made up of PEO and water. Expressions for the standard state free energy change associated with solubilization of hydrocarbons by aggregates having spherical, cylindrical, and lamellar shapes are presented. These free energy contributions account for the mixing of the core block with the solubilizate, the consequent changes in the state of deformation of the core block, the changes in the state of dilution and deformation of the corona block, the formation of the core-solvent interface, and the backfolding of the triblock copolymer which ensures that the two end blocks are in contact with the solvent. Utilizing these free energy expressions, we predict the core size, the corona thickness, and the aggregation number of the micelle and also the volume fraction of the hydrocarbon solubilized in the core, for seven aromatic and aliphatic hydrocarbon solubilizates incorporated within numerous Pluronic® compounds. The calculated results show that a growth in aggregate size occurs both because of the incorporation of the hydrocarbon and also the increase in the intrinsic number of block copolymer molecules per aggregate. More interestingly, solubilization is shown to induce a transition in aggregate shapes from spheres to cylinders and then to lamellae. The shape transition is found to be critically controlled by the free energy of mixing of the solubilizate with the core forming PPO block. 相似文献
5.
Hansen Yu Yunfei Liu Haiyang Yang Kang Peng Xingyuan Zhang 《Macromolecular rapid communications》2016,37(21):1723-1728
Injectable hydrogels have been commonly used as drug‐delivery vehicles and tried in tissue engineering. Injectable self‐healing hydrogels have great advantage over traditional injectable hydrogels because they can be injected as a liquid and then rapidly form bulk gels in situ at the target site under physiological conditions. This study develops an injectable thermosensitive self‐healing hydrogel based on chain‐extended F127 (PEO90‐PPO65‐PEO90) multi‐block copolymer (m‐F127). The rapid sol–gel transition ability under body temperature allows it to be used as injectable hydrogel and the self‐healing property allows it to withstand repeated deformation and quickly recover its mechanical properties and structure through the dynamic covalent bonds. It is hoped that the novel strategy and the fascinating properties of the hydrogel as presented here will provide new opportunities with regard to the design and practical application of injectable self‐healing hydrogels.
6.
Yan Huang Huaqiang Cai Ting Yu Xiuli Sun Dr. Bo Tu Dr. Dongyuan Zhao Prof. Dr. 《化学:亚洲杂志》2007,2(10):1195-1195
7.
Jennifer L. Sorrells Ying‐Hsin Tsai Karen L. Wooley 《Journal of polymer science. Part A, Polymer chemistry》2010,48(20):4465-4472
In the effort towards making nanoscale objects and assemblies feasible for use as functional materials, it is imperative to obtain control over the fundamental architectures and essential to understand what experimental conditions cause the manifestation of specific morphologies. A number of factors are known to influence the shape during the self‐assembly of amphiphilic block copolymers in solution, including solvent composition, polymer length, hydrophobicity versus hydrophilicity, as well as the addition of additives that can interact with segments of the block copolymers. This research, focused on developing an understanding of the micellar architectures accessed by the amphiphilic triblock copolymer of acrylic acid, methyl acrylate, and styrene, PAA85‐b‐PMA40‐b‐PS35, as a function of the stirring rate, together with other factors, when undergoing coassembly with ethylenediamine or diethylenetriamine in water/tetrahydrofuran solutions. The work demonstrates that the rate at which the polymer solution was stirred impacts the shape of the solution‐state assemblies formed by the triblock copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010 相似文献
8.
9.
《先进技术聚合物》2018,29(1):677-680
This work described a new method for the synthesis of PS‐g‐PA6 grafted copolymer micelles. PS‐g‐PA6 sphere micelles were synthesized by using a same solvent at the absence of selective solvent. The morphologies of micelles were characterized by SEM and TEM. The PS‐g‐PA6 micelles loaded Fe3O4 particles have better MRI imaging effect. The synthesis strategy developed here may present a desirable way to fabricate grafted copolymer micelles. 相似文献
10.
Joachim Habel Anayo Ogbonna Nanna Larsen Lars Schulte Kristoffer Almdal Claus Hélix‐Nielsen 《Journal of Polymer Science.Polymer Physics》2016,54(7):699-708
Amphiphilic polybutadiene polyethylene oxide (PB‐PEO) is one of the best known chemistries to form stable vesicular morphologies, stated as polymersomes, in aqueous environment. Mimicking cell membranes, these structures self‐assemble in an “amphiphilic window” determined by 0.15 < f < 0.35 where f is the ratio between the hydrophilic block volume and the entire diblock volume. However the polymersome size distribution also depends on molecular weight (Mn) and in order to gain insight on how f and Mn together determine polymersome size, we prepared PB‐PEO diblock copolymers with different block lengths and analyzed vesicle morphology via Dynamic light scattering (DLS) and Freeze‐fracture transmission electron microscopy (FF‐TEM). We found three main regimes: high f / low Mn with polymersomes of mixed diameter, high f / high Mn with mainly large polymersomes and low f, with mainly small polymersomes. In the first region, the polymersomes are highly polydisperse. There is a tendency towards increased diameter with increasing f and Mn. Taken together our findings can help to identify how polymersome self‐assembly can be controlled to achieve size distribution specificity alleviating the need for subsequent tuning of size via extrusion. This can pave the way for cost‐effective upscaling of polymersome production for biomedical and biomimetic applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 699–708 相似文献
11.
Wenjuan Wang Ling Lin Jiang Lu Hui Liang Hao Feng Lifen Hu 《Journal of polymer science. Part A, Polymer chemistry》2016,54(8):1056-1064
Triblock copolymers (MPEG‐b‐PCEMA‐b‐PHQHEMA) bearing cinnamoyl and 8‐hydroxyquinoline side groups with different block length are synthesized by a two‐step reversible addition fragmentation chain transfer polymerization of cinnamoyl ethyl methacrylate (CEMA) and 2‐((8‐hydroxyquinolin‐5‐yl)methoxy)ethyl methacrylate (HQHEMA), respectively. The self‐assembly of MPEG‐b‐PCEMA‐b‐PHQHEMA in mixture of THF and ethanol is investigated by varying the ratio of THF and ethanol. Spheric micelles with diameter of 63.7 nm and polydispersity of 0.128 are obtained for MPEG113‐b‐PCEMA15‐b‐PHQHEMA17 in THF/ethanol with a volume ratio (v/v) of 5/5. The PCEMA inner shell of the resulted micelles is photo‐crosslinked under UV radiation to give stabilized micelles. The complex reaction of the stabilized micelles with Zn(II) is investigated under different conditions to give zinc(II)‐bis(8‐hydroxyquinoline)(Znq2)‐containing micelles. When the complex reaction is carried out in THF/ethanol (v/v = 5/5) or THF/toluene (v/v = 6/4) with zinc acetate, fluorescent Znq2‐containing micelles are obtained without obvious change in diameters and morphologies. The fluorescent micelles exhibit green emission with λmax at 520 nm. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1056–1064 相似文献
12.
13.
14.
So Young Jeong Hyo Jung Moon Min Hee Park Min Kyung Joo Byeongmoon Jeong 《Journal of polymer science. Part A, Polymer chemistry》2012,50(15):3184-3191
We report a poly(ethylene glycol)‐poly(L ‐alanine)‐azobenzene‐poly(L ‐alanine)‐poly(ethylene glycol) (PEG‐PA‐Z‐PA‐PEG) as a temperature and light sensitive polymer. The poly(ethylene glycol)‐poly(L ‐alanine) diblock copolymers with a flexible‐rigid block structure were coupled by an azobenzene group that undergoes a reversible configurational change between “trans” and “cis” upon exposure to UV and vis light. The single azobenzene molecule embedded in the middle of a block copolymer with a flexible (shell)‐rigid (core) structure significantly affected molecular assembly, micelle size, polypeptide secondary structure, and sol‐to‐gel transition temperature of the polymer aqueous solution, depending on its exposure to UV or vis light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
15.
Xia Li Qi Wu Min Lu Fu Zhang Xianfu Lin 《Journal of polymer science. Part A, Polymer chemistry》2008,46(8):2734-2744
Hepatoma‐targeting micelles were successfully prepared by self‐assembly of galactose‐functionalized ribavirin‐containing amphiphilic random copolymer as novel drug delivery vehicles. The ribavirin‐containing random copolymer with galactose as the targeting ligand was facilely synthesized by combining enzymatic transesterification with radical polymerization and fully characterized by FTIR, NMR, and GPC. The formation of micelle‐type aggregates from the random copolymer was verified by UV–vis and fluorescence spectroscopy using pyrene as the guest molecule. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) experiments revealed that the micelles were well dispersed as spherical nanoparticles in water, whose hydrodynamic diameter was 217 ± 19 nm. Their biological recognition to fluorescein‐labeled peanut agglutinin investigated by confocal laser scanning microscopy (CLSM) proved the existence of hydrophilic galactose targeting moieties on the surface of micelles. Cell cytotoxicity tests and the inhibition experiment of galactose performed by MTT assay showed that the micelles had evident targeting function to hepG2 cells and the galactose moieties on the surface of micelles mediated cellar uptake of micelles. In vitro release studies indicated that ribavirin could be slowly released from the copolymer with pseudo zero‐order kinetics. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2734–2744, 2008 相似文献
16.
Yoichi Ogata Takeshi Mogi Yutaka Makita 《Journal of Polymer Science.Polymer Physics》2010,48(5):588-594
Solution property of hydrogenated polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer (SEBS copolymer) was studied by using static light scattering and dynamic light scattering for cyclohexane and N‐methylpyrrolidone (NMP) solutions. From the values of dimensionless parameters ρ, defined as the ratio of radius of gyration 〈S2〉1/2 to hydrodynamic radius RH, and solubility parameters, SEBS copolymer proved to exist as single chain close to random coil in nonpolar cyclohexane, whereas aggregate into the core‐shell micelle consisting of poly(ethylene/butylene) (PEB) core surrounded by PS shell in polar NMP. The core‐shell micelle formed in NMP is composed of 65 polymer chains, having three times larger average chain density (d = 0.12 g cm?3) than a single polymer chain (d = 0.04 g cm?3) in cyclohexane. The comparison with the aggregation behaviors in other solvents demonstrated that the aggregate compactness of the copolymer depended largely on solvent polarity, resulting in formation of the highly dense PEB core (Rc = 4.5 nm) and the thick PS shell (ΔR = 22.9 nm) in high‐polar NMP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 588–594, 2010 相似文献
17.
The effect of the hydrophobic properties of blocks B and C on the aggregate morphologies formed by ABC linear triblock copolymers in selective solvent was studied through the self‐consistent field theory. Five typical micelles, such as core‐shell‐corona, hamburger‐like, segmented‐wormlike, were obtained by changing the hydrophobic properties of blocks B and C. The simulation results indicate that the shape and size of micelle are basically controlled by the hydrophobic degree of the middle block B, whereas the type of micelle is mainly determined by the hydrophobic degree of the end block C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 484–492, 2009 相似文献
18.
Zhida Wang Fengman Sun Shilin Huang Changfeng Yan 《Journal of Polymer Science.Polymer Physics》2016,54(15):1450-1457
Mechanism of the morphological changes between toroidal and rod‐like nanostructures of P4VP‐b‐PS‐b‐P4VP amphiphilic triblock copolymer micelles has been investigated in aqueous solution. This transition is proved to be highly reversible and tunable upon changing temperature. The toroidal structure, evolving from fibers at 20 °C, can transform to rod‐like morphology as the temperature either gradually or directly increases to 80 °C, and vice versa. However, the transition mechanisms are quite different in different temperature‐changing processes. The structure and thickness of the micelles are dependent on the specific temperature, whereas the transition mechanism is related to the method of the temperature change. These morphological changes are considered as a result from the interaction parameter between the solvent and the copolymer blocks, especially the hydrophobic block. Our research complements the external control over the reversible morphological transition of block copolymer micelles without changing the composition of the system or introducing additional influencing factors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1450–1457 相似文献
19.
Zhishen Ge Daoyong Chen Jingyan Zhang Jingyi Rao Jun Yin Di Wang Xuejuan Wan Wenfang Shi Shiyong Liu 《Journal of polymer science. Part A, Polymer chemistry》2007,45(8):1432-1445
We report the first instance of facile synthesis of dumbbell‐shaped dendritic‐linear‐dendritic triblock copolymer, [G‐3]‐PNIPAM‐[G‐3], consisting of third generation poly(benzyl ether) monodendrons ([G‐3]) and linear poly(N‐isopropylacrylamide) (PNIPAM), via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The key step was the preparation of novel [G‐3]‐based RAFT agent, [G‐3]‐CH2SCSSCH2‐[G‐3] (1), from third‐generation dendritic poly(benzyl ether) bromide, [G‐3]‐CH2Br. Due to the bulky nature of [G‐3]‐CH2Br, its transformation into trithiocarbonate 1 cannot go to completion, a mixture containing ~80 mol % of 1 and 20 mol % [G‐3]‐CH2Br was obtained. Dumbbell‐shaped [G‐3]‐PNIPAM310‐[G‐3] triblock copolymer was then successfully obtained by the RAFT polymerization of N‐isopropylacylamide (NIPAM) using 1 as the mediating agent, and trace amount of unreacted [G‐3]‐CH2Br was conveniently removed during purification by precipitating the polymer into diethyl ether. The dendritic‐linear‐dendritic triblock structure was further confirmed by aminolysis, and fully characterized by gel permeation chromatography (GPC) and 1H‐NMR. The amphiphilic dumbbell‐shaped triblock copolymer contains a thermoresponsive PNIPAM middle block, in aqueous solution it self‐assembles into spherical nanoparticles with the core consisting of hydrophobic [G‐3] dendritic block and stabilized by the PNIPAM central block, forming loops surrounding the insoluble core. The micellar properties of [G‐3]‐PNIPAM310‐[G‐3] were then fully characterized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1432–1445, 2007 相似文献
20.
Somdeb Jana Avijit Bose Anupam Saha Tarun K. Mandal 《Journal of polymer science. Part A, Polymer chemistry》2017,55(10):1714-1729
A double‐responsive amphiphilic random copolymer (P(OEtOxA)‐ran‐PNBA) composed of thermoresponsive poly(oligo(2‐ethyl‐2‐oxazoline)acrylate) (P(OEtOxA)) segments and photocleavable poly(2‐nitrobenzyl acrylate) (PNBA) segments is synthesized via combination of cationic ring‐opening polymerization (CROP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization techniques. The P(OEtOxA)‐ran‐PNBA copolymer exhibits lower critical solution (LCST)‐type soluble‐to‐turbid phase transition in water with tunable cloud point (Tcp) with respect to chain length of P(OEtOxA) segment present. The photocleavage of PNBA segments by UV irradiation transforms amphiphilic P(OEtOxA)‐ran‐PNBA to fully hydrophilic P(OEtOxA)‐ran‐poly(acrylic acid) resulting in the appreciable increase of Tcp of copolymer in aqueous solution. Owing to the amphiphilic nature, the P(OEtOxA)‐ran‐PNBA copolymer molecules self‐assemble into well‐dispersed spherical micelles in water. There is a disruption of the copolymer micelles with UV light irradiation as well as shrinkage of micellar size with increasing temperature above the LCST of copolymer in solution. Finally, the encapsulation of hydrophobic guest molecule (nile red) into P(OEtOxA)‐ran‐PNBA copolymer micelles and thermo‐ and photo‐triggered release of nile red are demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1714–1729 相似文献