Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine] from ring‐opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co?O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III‐OR into the OMRP photoinitiator (Salen)Co^III‐CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III‐OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on‐demand sequence control can be achieved for the one‐pot synthesis of polyester‐b‐polyacrylate diblock copolymers (?<1.15).     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Synthesis,structural features and biochemical activity assessment of N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde Schiff base and its Co(II), Ni(II), Cu(II) and Zn(II) complexes

The tetradentate Schiff base ligand (SB), N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde was prepared via condensation of 2,5‐thiophene‐dicarboxaldehyde with 2‐aminothiophenol in a 1:2 molar ratio by conventional method. Additionally, its Co(II), Ni(II), Cu(II) and Zn(II) complexes have been synthesized and fully characterized by elemental analysis, FT‐IR, ¹H NMR, ¹³C NMR, UV–Vis, ESR, ESI‐mass, conductivity and magnetic susceptibility measurements. Spectral studies suggested that, the Schiff base coordinate metal ions through the azomethine N‐ and deprotonated thiol S‐ atoms. Based on UV–Vis absorption and magnetic susceptibility data, tetrahedral geometry was assigned for both Co(II) and Zn(II) complexes, whereas on the other hand, square planar geometry for both Ni(II) and Cu(II) complexes. The Schiff base and its metal complexes were screened for their in vitro antimicrobial activity by minimum inhibitory concentration (MIC) method. Free radical scavenging activity of the novel compounds was determined by elimination of 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radicals. In addition, the interactions of the free ligand and its complexes with calf thymus DNA (CT‐DNA) were explored using absorption, emission and viscosity measurements techniques.     

Synthesis and Thermal Properties of a Novel Schiff Base Oligomer with a Double Azomethine Group and its Co(II) and Mn(II) Complexes

Schiff base oligomer of N,N′‐bis (2,4‐dihydroxybenzylidene) 1,2‐phenylenediamine (DHBPDA), with a double azomethine group, was synthesized from the oxidative polycondensation (OP) reaction with NaOCl as an oxidant in an aqueous alkaline medium at 90°C. About 75% DHBPDA was converted to O‐DHBPDA. The structures of the products were studied by UV‐Vis, FT‐IR, ¹H‐NMR, ¹³C‐NMR and elemental analysis. According to Gel Permeation Chromatography (GPC) analysis of O‐DHBPDA, the number average molecular weight (M_n), weight average molecular weight (M_w) and PDI values were found to be 4328 g mol^?1, 6228 g mol^?1 and 1.43, respectively. TG/DTA analyses were shown to be stable of O‐DHBPDA against thermo‐oxidative decomposition. During the polycondensation reaction, a part of the azomethine (‐CH?N‐) groups oxidized to aldehyde (CHO) group (10–12%). Oligomer‐metal complexes of oligo‐N,N′‐bis (2,4‐dihydroxybenzylidene) 1,2‐phenylenediamine (O‐DHBPDA) with Co(II) and Mn(II) were synthesized and characterized by FT‐IR, UV‐Vis, TG‐DTA and Atomic Absorption Spectroscopy (AAS). The residue of DHBPDA, O‐DHBPDA, O‐DHBPDA‐Co and O‐DHBPDA‐Mn were found to be 0%, 3.65%, 11.67%, and 9.20%, respectively at 1000°C.     

The Voltammetric Behavior of Superoxide Dismutase/Catalase Mimics

The voltammetric behavior of the superoxide dismutase/catalase mimics [(N,N′‐bis(salicylidene)ethylenediamine)Mn(III)]Cl (or salenMn(III) chloride) 1 and [(N,N′‐bis(3‐methoxysalicylidene)ethylenediamine)Mn(III)]Cl (or 3,3′‐methoxysalenMn(III) chloride) 2 in acetonitrile is described. Both compounds show quasi‐reversible one‐electron reductions to the Mn(II) compound. Electroanalytical techniques are used to follow the reaction between superoxide and 1 and 2 and it is shown that it is the reduced Mn(II) compounds which scavenge superoxide. It is also shown that both compounds electrocatalytically generate superoxide in the presence of dissolved dioxygen. The rate constant for this reaction was determined for both compounds using microelectrode steady state voltammetry. A general reaction scheme for interactions between these compounds and both dissolved dioxygen and superoxide is proposed.     

Molecular structure,molecular docking,thermal, spectroscopic and biological activity studies of bis‐Schiff base ligand and its metal complexes

Coordination compounds of Fe(III), Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II) ions were synthesized from the ligand [4,4′‐((((ethane‐1,2‐diylbis(oxy))bis(2,1‐phenylene))bis(methanylylidene))bis(azanylylidene))diphenol]ethane (H₂L) derived from the condensation of bisaldehyde and 4‐aminophenol. Microanalysis, magnetic susceptibility, infrared, ¹H NMR and mass spectroscopies, molar conductance, X ray powder diffraction and thermal analysis were used to confirm the structure of the synthesized chelates. According to the data obtained, the composition of the 1:1 metal ion–bis‐Schiff base ligand was found to be [M(H₂L)(H₂O)₂]Cl_n (M = Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II), n = 2; Fe(III), n = 3). Magnetic susceptibility measurements and reflectance spectra suggested an octahedral geometry for the complexes. Central metals ions and bis‐Schiff base coordinated together via O2 and N2 donor sites which as evident from infrared spectra. The Gaussian09 program was applied to optimize the structural formula for the investigated Schiff base ligand. The energy gaps and other important theoretical parameters were calculated applying the DFT/B3LYP method. Molecular docking using AutoDock tools was utilized to explain the experimental behaviour of the Schiff base ligand towards proteins of Bacillus subtilis (5 h67), Escherichia coli (3 t88), Proteus vulgaris (5i39) and Staphylococcus aureus (3ty7) microorganisms through theoretical calculations. The docked protein receptors were investigated and the energies of hydrogen bonding were calculated. These complexes were then subjected to in vitro antibacterial studies against several organisms, both Gram negative (P. vulgaris and E. coli) and Gram positive (S. pyogones and B. subtilis). The ligand and metal complexes exhibited good microbial activity against the Gram‐positive and Gram‐negative bacteria.     

Metallation of tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> Schiff base with Mn(II), Co(II), Cu(II) and Zn(II): synthesis,characterization and formation constants measurement

Four Schiff base ligands, salabza-H₂ = N,N′-bis(salicylidene)-2-aminobenzylamine, were synthesized by condensation of one mole of 2-aminobenzylamine and two moles of salicylaldehyde and/or two moles of substituted salicylaldehyde (5-OMe, 5-Br, 5-NO₂). All the four Schiff bases and their Mn(II), Co(II), Cu(II) and Zn(II) complexes are characterized by UV-Vis, FT-IR, ¹H NMR spectroscopy, mass spectrometry and elemental analysis. The formation constants and the Gibbs free energies were measured spectrophotometrically for 1:1 complexes in methanol in constant ionic strength (I = 0.1 mol dm⁻³ NaClO₄) and at 25°C. The data refinement was carried out with the SQUAD program. The trend of formation constants of H₂L¹ with M(II) follows the order: Mn(II) (3.97) < Zn(II) (4.30) < Co(II) (4.89) < Cu(II) (5.73)     

Triazine based Mn (II) and Mn (II)/Ln (III) complexes: Synthesis,characterization and catecholase activities

In the current work, two triazine‐based multidentate ligands (H₂L¹ and H₂L²) and their homo‐dinuclear Mn (II), mononuclear Ln (III) and hetero‐dinuclear Mn (II)/Ln (III) (Where Ln: Eu or La) complexes were synthesized and characterized by spectroscopic and analytical methods. Single crystals of a homo‐dinuclear Mn (II) complex {[Mn (HL¹)(CH₃OH)](ClO₄·CH₃OH}₂ ( 1 ) were obtained and the molecular structure was determined by X‐ray diffraction method. In the structure of the complex, each Mn (II) ion is seven‐coordinate and one of the phenolic oxygen bridges two Mn (II) centre forming a dimeric structure. The UV–Vis. and photoluminescence properties of synthesized ligands and their metal complexes were investigated in DMF solution and the compounds showed emission bands in the UV–Vis. region. The catecholase enzyme‐like activity of the complexes were studied for 3,5‐DTBC → 3,5‐DTBQ conversion in the presence of air oxygen. Homo‐dinuclear Mn (II) complexes ( 1 and 4 ) were found to efficiently catalyse 3,5‐DTBC → 3,5‐DTBQ conversion with the turnover numbers of 37.25 and 35.78 h^?1 (k_cat), respectively. Mononuclear Eu (III) and La (III) complexes did not show catecholase activity.     

Synthesis,characterization, and biological properties of Ni(II), Co(II), and Cu(II) complexes of Schiff bases derived from 4-aminobenzylamine

New Schiff bases, N,N′-bis(salicylidene)-4-aminobenzylamine (H₂L¹), N,N′-bis(3-methoxysalicylidene)-4-aminobenzylamine (H₂L²), and N,N′-bis(4-hydroxysalicylidene)-4-aminobenzylamine (H₂L³), with their nickel(II), cobalt(II), and copper(II) complexes have been synthesized and characterized by elemental analyses, electronic absorption, FT-IR, magnetic susceptibility, and conductance measurements. For the ligands, ¹H and ¹³C NMR and mass spectra were obtained. The tetradentate ligands coordinate to the metal ions through the phenolic oxygen and azomethine nitrogens. The keto-enol tautomeric forms of the Schiff bases H₂L¹, H₂L², and H₂L³ have been investigated in polar and apolar solvents. All compounds were non-electrolytes in DMSO (～10^?3 M) according to the conductance measurements. Antimicrobial activities of the Schiff bases and their complexes have been tested against Acinobacter baumannii, Pseudomonas aeruginosa, Micrococcus luteus, Bacillus megaterium, Corynebacterium xerosis, Staphylococcus aureus, Escherichia coli, Candida albicans, Rhodotorula rubra, and Kluyveromyces marxianus by the disc diffusion method; biological activity increases on complexation.     

Synthesis,characterization and antibacterial properties of symmetric 1,1′‐ferrocene derived Schiff‐base ligands and their Co(II), Cu(II), Ni(II) and Zn(II) chelates

Symmetric 1,1′‐dimethylferrocene derived Schiff‐base ligands have been prepared by the condensation reaction of 1,1′‐diacetylferrocene with 2‐aminopyrazine, 2‐aminopyridine and 2‐aminothiazole respectively. Their transition metal chelates, of the type [M(L)]Cl₂ [M = Cu(II)] and [M(L)(Cl₂)] [M = Co(II), Ni(II) and Zn(II)] have been prepared. The synthesized Schiff‐base ligands and their metal(II) chelates have been characterized by their physical, analytical and spectral data. Copyright © 2000 John Wiley & Sons, Ltd.     

The Synthesis and Characterization of s‐Triazine‐Cored Tripodal Structure and Its Salen/Salophen‐Bridged Fe/Cr(III) Capped Complexes

A novel Schiff base compound was synthesized, and its complexation properties with Fe(III) and Cr(III) were investigated. Tripodal ligand was synthesized by the reaction of s‐triazine and 4‐hydroxybenzaldehyde. Then a Schiff base involving 8‐hydroxyquinoline was synthesized by the reaction of 5‐aminomethyl‐8‐hydroxyquinoline ( QN ) and 2,4,6‐tris(p‐formylphenoxy)‐1,3,5‐triazine ( TRIPOD ) in methanol/chloroform media. The obtained Schiff base ( QN-TRIPOD ) was then reacted with four trinuclear Fe(III) and Cr(III) complexes including tetradentate Schiff bases N ,N ′‐bis(salicylidene)ethylenediamine (salenH₂)/bis(salicylidene)‐o‐phenylenediamine (SalophenH₂). The synthesized ligand and complexes were characterized by means of elemental analysis carrying out ¹H NMR, FTIR spectroscopy, thermal analyses, and magnetic susceptibility measurements. Finally, metal ratios of the prepared complexes were determined by using atomic adsorption spectrometry.     

Highly efficient blue organic light-emitting diodes based on 2-(diphenylamino)fluoren-7-ylvinylarene derivatives that bear a tert-butyl group

Blue fluorescent materials with a 2‐(diphenylamino)fluoren‐7‐ylvinylarene emitting unit and tert‐butyl‐based blocking units were synthesized. The photophysical properties of these materials, including UV/Vis absorption, photoluminescent properties, and HOMO–LUMO energy levels, were characterized and rationalized with quantum‐mechanical DFT calculations. The electroluminescent properties of these molecules were examined through the fabrication of multilayer devices with a structure of indium–tin oxide, 4,4′‐bis{N‐[4‐(N,N‐di‐m‐tolylamino)phenyl]‐N‐phenylamino}biphenyl, 4′‐bis[N‐(1‐naphthyl)‐N‐phenylamino]biphenyl, and blue materials doped in 2‐methyl‐9,10‐di(2‐naphthyl)anthracene/tris(8‐quinolinolato)aluminum/LiF/Al. All devices exhibit highly efficient blue electroluminescence with high external quantum efficiency (3.20–7.72 % at 20 mA cm^?2). A deep‐blue device with Commission Internationale de l’Eclairage (CIE) coordinates of (0.15, 0.11) that uses 7‐[2‐(3′,5′‐di‐tert‐butylbiphenyl‐4‐yl)vinyl]‐9,9‐diethyl‐2‐N‐(3,5‐di‐tert‐butylphenyl)‐2,4‐difluorobenzenamino‐9H‐fluorene as a dopant in the emitting layer showed a luminous efficiency and external quantum efficiency of 3.95 cd A^?1 and 4.23 % at 20 mA cm^?2, respectively. Furthermore, a highly efficient sky‐blue device that uses the dopant 7‐{2‐[2‐(3,5‐di‐tert‐butylphenyl)‐9,9′‐spirobifluorene‐7‐yl]vinyl}‐9,9‐diethyl‐2‐N,N‐diphenylamino‐9H‐fluorene exhibited a luminous efficiency and high quantum efficiency of 10.3 cd A^?1 and 7.7 % at 20 mA cm^?2, respectively, with CIE coordinates of (0.15, 0.20).     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Organic acid solutions in the chromatography of inorganic ions. VII. Cation exchange of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media

Summary The cation-exchange behaviour of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the NH ₄ ⁺ form. As examples separations of Cd(II)/Co(II), Cd (II)/Ni(II), Fe(III)/Cu(II)/Ni(II) and Mg(II)/Ca(II)/Sr(II)/Ba(II) have been achieved.This work was supported by C.N.R. of Italy.     

Synthesis,characterization, coordination and antibacterial properties of novel asymmetric 1,1′‐disubstituted ferrocene‐derived Schiff‐base ligands and their Co(II), Cu(II) Ni(II) and Zn(II) complexes

Some new asymmetric 1,1 ′‐disubstituted ferrocene‐derived Schiff‐bases have been prepared and used as ligands in the preparation of their Co(II), Cu(II), Ni(II) and Zn(II) metal chelates. These synthesized ligands and their metal chelates have been characterized by their physical, analytical and spectral data. These have also been used for screening against pathogenic bacterial species, e.g. Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumonae and have been found to be a novel class of organometallic‐based antibacterials. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis and Structure of the Cerium Schiff‐Base Complexes [Ce(Salen′)2] and [(THF)2KCe(Salen′)2]

The synthesis of [Ce(Salen′)₂] ( 1 ) (H₂Salen′ = N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)ethylenediamine) was performed using two different approaches. CeCl₃ reacts with two equivalents of K₂Salen′ in THF under the formation of [(THF)₂KCe(Salen′)₂] ( 2 ). Complex 2 could be converted to the Ce^IV complex 1 via oxidation with p‐benzoquinone and air, respectively. The reversible reduction process was realized using elemental potassium in boiling THF. Furthermore, the reaction of the Ce^IV starting material [(^tBuO)₄Ce(THF)₂] with the “free” ligand H₂Salen′ in boiling toluene lead in the formation of 1 as well.     

Coordination compounds of hydrazine derivatives with transition metals,part XVIII. Cobalt(II) and cobalt(III) chelates with schiff bases derived from hydrazine-S-methyldithiocarboxylate and thiosemicarbazide

Summary The reactions of aldehydic and ketonic Schiff bases derived from hydrazine-S-methyl dithiocarboxylate and thiosemicar-bazide with cobalt(II) acetate were investigated. Octahedral tris ligand cobalt(III) chelates were formed with aldehydic Schiff bases whereas tetrahedral bis ligand cobalt (II) chelates were isolated with ketonic Schiff bases.N-isopropylidene hydrazine-S-methyldithiocarboxylate, however, gave both octahedral tris cobalt(III) and tetrahedral bis cobalt(II) chelates. These results are interpreted in terms of the steric requirements of the Schiff base used.     

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)‐SalenCoIII‐ (2,4‐dinitrophenoxy) and Lewis‐basic cocatalyst

A binary catalyst system of a chiral (R,R)‐SalenCo^III(2,4‐dinitrophenoxy) (salen = N,N‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐diphenylethylenediimine) in conjunction with (4‐dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO₂) and racemic propylene oxide (rac‐PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h^?1 and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as‐prepared products were characterized by the IR, ¹H NMR, ¹³C NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5050–5056, 2007     

Effect of Heavy‐Atom (Br) at the Phenyl Rings of Schiff‐Base Ligands on the NIR Luminescence of their Bimetallic Zn‐Nd Complexes

Two heterobimetallic Zn‐Nd phenylene‐bridged Schiff‐base ligands complexes [ZnNd L¹ (Py)(NO₃)₃] ( 1 ) and [Zn L² Nd(Py)(NO₃)₃]·MeCN ( 2 ) (Py = pyridine, H₂L¹ = N,N′‐bis‐ (3‐methoxy‐salicylidene)phenylene‐1,2‐diamine, H₂L² = N,N′‐bis‐5‐bromo‐3‐methoxy‐salicylidene)phenylene‐1,2‐diamine) were obtained. Both 1 and 2 were structurally characterized by X‐ray crystallography, and their near‐infrared (NIR) luminescent properties were determined. For the two complexes, the occupation of pyridine at the axial position of 3d Zn²⁺ ions could effectively prevent luminescent quenching arising from OH‐, NH‐ or CH oscillators of the solvates around the 4f Nd³⁺ ions, and the heavy‐atom (Br) effect of the Schiff‐base ligands on their NIR luminescent properties is also discussed.