靛族染料发色体电子光谱性质的含时密度泛函理论研究

采用密度泛函方法(DFT)在B3LYP／6—31 ^*水平上对一系列靛族染料发色体的几何构型进行优化计算；在获得基态稳定结构的基础上，应用含时密度泛函理论(TD—DFT)在相同水平下计算其电子吸收光谱．探讨了不同给电子基团和发色体的延伸对电子吸收光谱的影响，得到了与对应母体化合物一致的变化规律．结果表明，给电子基团给电子能力的增强和发色体的纵向延伸分别使光谱产生一定红移和轻微的蓝移．通过对前线轨道组成进行自然布居分析，揭示了靛族染料的发光均源自分子中HOMO—LUMO(π→π^*)电子跃迁．     

染料敏化太阳能电池中额外给体引入对经典D-π-A型敏化剂性能影响的理论研究

为了探讨D-D-π-A型染料中双给体对敏化剂性能的影响,本文结合密度泛函理论(DFT)及含时密度泛函理论(TD-DFT)对染料1~4的几何结构、电子结构、吸收光谱、电化学性质、电子复合程度以及半导体导带边缘的移动等进行了对比研究.结果表明,相比于经典的D-π-A型染料分子1,在分子2~4(D-D-π-A型双给体染料)中额外引入给体,尽管对导带能级移动的改变不是很显著,但是可以改变体系的共轭程度,增加染料的光吸收强度.重要的是,额外给体的引入可以显著增加染料阳离子空穴-半导体之间的距离,从而减缓注入电子与染料阳离子的复合;在额外给体中引入杂原子可以使I2聚集在染料外侧,从而降低电解质在半导体表面的局域浓度,进而减缓注入电子与电解质之间的复合速率.因此,通过在经典的D-π-A型染料上引入额外的电子给体构筑D-D-π-A型染料可以有效调节染料的光吸收、电化学及电子复合等方面的性质,是设计合成高性能染料的可行策略.     

染料敏化太阳能电池中额外给体引入对经典D-π-A型敏化剂性能影响的理论研究

为了探讨D-D-π-A型染料中双给体对敏化剂性能的影响, 本文结合密度泛函理论(DFT)及含时密度泛函理论(TD-DFT)对染料1~4的几何结构、 电子结构、 吸收光谱、 电化学性质、 电子复合程度以及半导体导带边缘的移动等进行了对比研究. 结果表明, 相比于经典的D-π-A型染料分子1, 在分子2~4(D-D-π-A型双给体染料) 中额外引入给体, 尽管对导带能级移动的改变不是很显著, 但是可以改变体系的共轭程度, 增加染料的光吸收强度. 重要的是, 额外给体的引入可以显著增加染料阳离子空穴-半导体之间的距离, 从而减缓注入电子与染料阳离子的复合; 在额外给体中引入杂原子可以使I₂聚集在染料外侧, 从而降低电解质在半导体表面的局域浓度, 进而减缓注入电子与电解质之间的复合速率. 因此, 通过在经典的D-π-A型染料上引入额外的电子给体构筑D-D-π-A型染料可以有效调节染料的光吸收、 电化学及电子复合等方面的性质, 是设计合成高性能染料的可行策略.     

四硫富瓦烯作为染料敏化太阳能电池有机染料电子给体的理论研究(英文)

为了研究四硫富瓦烯(TTF)基团对有机染料敏化剂光电性能的影响,以咔唑染料Dye 1为原型,引入TTF基团作为电子给体,设计了咔唑染料Dye 2.采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别计算模拟了纯染料分子和吸附团簇(TiO2)9后的形貌、分子轨道能级以及紫外-可见吸收光谱,采用周期性密度泛函理论计算模拟染料分子在二氧化钛(101)面吸附的表面形貌.结果发现:在有机染料中引入TTF基团有助于有机染料敏化剂在二氧化钛表面的抗团聚作用和分子内的电荷转移;最为重要的是,TTF基团的强给电子能力极大地增强了有机染料敏化剂的光捕获能力.所有的计算结果表明,TTF基团是一种非常有潜力改善染料敏化剂光电性能的给电子基团.     

给电子基团对吲哚染料电子结构和吸收光谱的影响

利用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT), 分别基于B3LYP和PBE1PBE方法研究了一系列含有不同给电子基团的吲哚染料分子(ID1-ID3)的电子结构和吸收光谱性质. 重点比较了不同电子给体对染料的分子结构、吸收光谱以及其在电池中的光伏性能的影响. 结果表明从ID1、ID2到ID3, 随着电子给体中苯环数目的增加, 吲哚分子上的共轭效应逐渐增大, 导致吲哚分子最高占据分子轨道-最低未占据分子轨道(HOMO-LUMO)之间的能隙变窄, 分子的吸收光谱发生红移. 染料分子的吸收光谱和LUMO能级分别影响染料的吸光效率和光电转化过程中电子的注入过程, 从而使其二者成为决定电池光伏性能的重要参数. 综合考虑上述两个参数对电池性能的贡献, 通过理论研究证实, 在ID1-ID3系列染料中, ID3具有较长的吸收谱带、较大的分子消光系数和合适的LUMO能级, 从而表现出最为优越的光伏性能, 这与实验得出的结论很好地吻合.     

荧烷染料的光诱导显色反应和机制的研究

荧烷染料是一类重要的功能性染料,广泛地应用于热敏和压敏记录材料.通常采用在酸作用下,使荧烷染料发生显色反应,由内酯环结构的无色体生成开环结构的有色体.并且通过吨环上不同取代基得到各种色调.荧烷染料有色体不稳定,在一般有机介质中容易发生褪色反应,使得荧烷染料作为记录介质普遍存在着色稳定性差、保存期短的缺点.为了改善有色体的稳定性,人们进行了大量的工作^[1-3],但均未取得重要进展.考虑到荧烷染料母核上带有烷胺基取代基,具有电子给体特性,有可能通过电子转移反应的途径进行显色反应.实现这种电子转移显色过程的关键问题是选择合适的电子受体.为此采用盐类化合物如碘盐和硫盐作为电了受体,因为它们容易和不同电子给体组成电子转移光敏反应体系^[4-6].因此,本文研究了以荧烷染料为电子给体和碘盐为电子受体的光致电子转移显色反应,并提出了显色反应机制.     

靛蓝衍生物的电子转移研究

合成了两个N,N′-取代的靛蓝染料,反式-N,N′-双对硝基苯甲酰基靛蓝(1)和反式N,N′-双间硝基苯甲酰基靛蓝(Ⅱ)。研究了这两个染料与电子给体(胺类化合物)或与电子受体(紫精化合物)之间的电子转移。结果表明,这两个染料在激发单重态经荧光猝灭,被紫精猝灭的速度常数(k_q)比被胺猝灭的速度常数大。     

四硫富瓦烯作为染料敏化太阳能电池有机染料电子给体的理论研究

为了研究四硫富瓦烯(TTF)基团对有机染料敏化剂光电性能的影响,以咔唑染料Dye 1 为原型,引入TTF基团作为电子给体,设计了咔唑染料Dye 2. 采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别计算模拟了纯染料分子和吸附团簇(TiO₂)₉后的形貌、分子轨道能级以及紫外-可见吸收光谱,采用周期性密度泛函理论计算模拟染料分子在二氧化钛(101)面吸附的表面形貌. 结果发现：在有机染料中引入TTF基团有助于有机染料敏化剂在二氧化钛表面的抗团聚作用和分子内的电荷转移;最为重要的是,TTF 基团的强给电子能力极大地增强了有机染料敏化剂的光捕获能力. 所有的计算结果表明,TTF基团是一种非常有潜力改善染料敏化剂光电性能的给电子基团.     

新型D-π-A类敏化太阳电池染料及其应用

功能性有机染料在染料敏化太阳能电池领域具有重要的应用前景,电子给体、π共轭桥和电子受体（D-π-A）结构的染料是其中重要的组成类型.本文主要依据三苯胺和吲哚啉等取代苯胺为电子给体染料的结构设计,并结合本课题组的相关工作,综述了2008年以来此类D-π-A光敏染料的光电转换性能的研究进展.     

染料敏化太阳能电池中二聚噻吩类光敏染料构效关系的理论研究

D-π-A型有机光敏染料结构上的微小差异会引起器件性能的显著不同. 为了合理解释染料分子1和2(给体分别为咔唑和二氢吲哚)结构与性能之间的关系, 采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)讨论了包括紫外-可见吸收光谱、 光捕获效率、 电子注入驱动力、 垂直方向偶极矩和电子转移数目在内的一系列影响染料性能的理论参数. 结果表明, 在光捕获效率和电子注入效率差别不大的情况下, 染料分子2较低的染料再生效率可导致其短路电流较小; 同时, 在由光诱导产生的从染料分子转移到半导体的电子数目以及电子复合程度相差不大的情况下, 染料分子1垂直方向上较大的偶极矩则可导致其具有较高的开路电压. 计算结果与实验值相吻合, 有望对今后设计合成高效光敏染料提供一定的理论指导.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.