Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Controlling aggregation of copper(II)-based coordination compounds: From mononuclear to dinuclear, tetranuclear, and polymeric copper complexes

The use of a strategy combining ligand design and changes of reaction conditions has been investigated with the goal of directing the assembly of mononuclear, dinuclear, tetranuclear, and polymeric copper(II) complexes. As a result, closely related copper monomers, alkoxo dimers, and hydroxo cubanes, along with a carbonate-bridged polymeric species, have been synthesized using the rigid, aliphatic amino ligands cis-3,5-diamino-trans-hydroxycyclohexane (DAHC), cis-3,5-diamino-trans-methoxycyclohexane (DAMC), and the glutaryl-linked derivative glutaric acid bis-(cis-3,5-diaminocyclohexyl) ester (GADACE). The composition of the monomeric complex has been determined by X-ray crystallography as [Cu(DAHC)2](ClO4)2 (1), the two dimers as [{Cu(DAHC)(OMe)}2](ClO4)2.MeOH (2) and [{Cu(DAMC)(OMe)(ClO4)}2] (3), the three Cu4O4 cubanes as [{Cu(DAHC)(OH)}4](ClO4)(4).2.5MeOH (4), [{Cu(DAMC)(OH)}4](ClO4)4.H2O (5), and [{Cu2(OH)2(GADACE)}2]Cl4.2MeOH.6H2O (6), and an infinite-chain structure as [{Cu(DAHC)(CO3)}n] (7). Furthermore, the cubane structures 4 and 5 have been investigated magnetically. Our studies indicate that formation of the monomeric, dimeric, and tetranuclear DAHC and DAMC complexes can be controlled by small changes in reaction conditions and that further preorganization of the ligand moiety by linking the DAHC cores (GADACE) allows more effective direction of the self-assembly of the Cu4O4 cubane core.     

Metal complexes from 1,1'-di(pyrazinyl)ferrocene: coordination polymers and bridged diferrocenes

Ferrocene-based ligands 1,1'-di(pyrazinyl)ferrocene (L1) and 1,1'-di(2-pyrimidinyl)ferrocene (L2) were synthesized and copper and silver complexes were obtained from L1. Coordination polymers [{Cu(2)(PhCOO)(4)}(L1)](n) (1), [{Cu(2)(C(5)H(11)COO)(4)}(L1)](n) (2), and [{Cu(2)(OAc)(4)}(L1)](n).0.5n[Cu(2)(OAc)(4)(H(2)O)(2)].1.5nCH(3)CN (3) resulted from the reaction with the corresponding copper carboxylates. In all three complexes, L1 links the dinuclear copper carboxylate units to form one-dimensional step-like chains. In 2, these chains are further linked by [Cu(2)(OAc)(4)(H(2)O)(2)] dinuclear units via hydrogen bonding to form sheet structures. The reaction of L1 with copper(I) iodide resulted in a multinuclear complex [(CuI)(4)(L1)(2)].(L1) (4), which contains a [(CuI)(4)(L1)(2)] diferrocene unit with a step-like (CuI)(4) core. Reactions of L1 with silver(I) salts resulted in silver-bridged diferrocenes [Ag(2)(L1)(2)]X(2) (X = ClO(4) (5a, b), NO(3) (6a-c) and PF(6) (7)), some of which incorporate aromatic solvents into their crystal lattices. The intramolecular Ag...Ag separations in these metallamacrocycles (3.211-3.430 A) depended upon the counter-anions and on the coordination mode of the silver ions. In all of these coordination complexes, L1adopts a synperiplanar eclipsed conformation and acts as a bidentate ligand, with only the 5-nitrogen of each pyrazine ring involved in coordination.     

Formation of molecular radical cations of aliphatic tripeptides from their complexes with CuII(12-crown-4)

Molecular radical cations have proven to be difficult to generate from aliphatic peptides under electrospray ionization mass spectrometry (ESI-MS) conditions. For a family of small aliphatic peptides GGX, where X = G, A, P, I, L and V, these cations have been generated by electrospraying a mixture of Cu.2+, 12-crown-4 and GGX in methanol/water. GGX.+ is readily formed from the collision-induced dissociation (CID) of [CuII(12-crown-4)(GGX)].2+. The formation of these aliphatic peptide radical ions from these complexes, in cases where it is not possible from the corresponding complexes involving a series of amine ligands instead of 12-crown-4, is likely due to the second ionization energy of the [CuI(12-crown-4)(GGX)]+ complex being higher than that of the corresponding [CuI(amine)(GGX)]+ complex. Using these 12-crown-4 complexes, GGI can be differentiated from the isomeric GGL by comparing the CID spectra of their [a3 + H].+ ions.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.     

Coordination polymers of copper(I) halides

A total of 21 complexes of CuX (X = Cl, Br, I) with bridging ligand (B = 4,4'-dipyridyl (Bpy), pyrazine (Pyz), quinoxaline (Quin), phenazine (Phz), 1,4-diazabicyclo[2.2.2]octane (DABCO), and hexamethylenetetramine (HMTA)) have been synthesized. The products show two stoichiometries: [CuXB] (type 1) and [(CuX)2B] (type 2). Both types can be obtained for B = Bpy, depending on the conditions of preparation. In these cases, the type 2 stoichiometry is the kinetic product. Type 2 complexes only are found for B = Pyz (X = I), Quin, Phz, DABCO, and HMTA. Type 1 complexes form for Pyz (X = Cl, Br). Thermogravimetic analyses of the complexes reveal the general decomposition trend: 1 --> 2 --> [(CuX)2B(1/2)] --> CuX. The X-ray crystal structure of [CuBr(Pyz)] (type 1) features copper atoms bridged by Br and Pyz, forming 2D sheets of fused rectangular Cu4Br2(Pyz)2 units. The X-ray structure of [(CuI)2(Quin)] (type 2) shows 2D layers composed of [Cu2I2]infinity "stair step" chains which are cross-linked by Quin ligands. A total of 16 complexes of CuXL (L = P(OPh)3) with bridging ligand (B = those above and 1,4-dimethylpiperazine (DMP)) have also been prepared. All of these products, except those of HMTA, are of type 3 formulation, [(CuXL)2B]. The HMTA products have the formula [CuX(HMTA)], type 4. Thermal decomposition of the type 3 and 4 complexes occurs with initial loss of B, L, or both. The X-ray structures of [(CuBrL)2(Bpy)] and [(CuBrL)2(Pyz)] (type 3) reveal 1D chains formed from rhomboidal (LCu)2Br2 units linked by the B ligand. The type 4 structure of [CuBrL(HMTA)] is shown by X-ray to be a simple halide-bridged dimer.     

Cuprophilic interactions in luminescent copper(I) clusters with bridging bis(dicyclohexylphosphino)methane and iodide ligands: spectroscopic and structural investigations

Polynuclear copper(I) complexes with bridging bis(dicyclohexylphosphino)methane (dcpm) and iodide ligands, [Cu(2)(dcpm)(2)(CH(3)CN)(2)](BF(4))(2) (1), [Cu(2)(dcpm)(2)](BF(4))(2) (2), [(CuI)(3)(dcpm)(2)] (3), [(CuI)(4)(dcpm)(2)] (4), and [(CuI)(2)(dcpm)(2)] (5) were prepared and their structures determined by X-ray crystal analysis. The shortest Cu--Cu distance found in these complexes is 2.475(1) A for 3. Powdered samples of 1, 3, 4, and 5 display intense and long-lived phosphorescence with lambda(max) at 460, 626, 590, and 456 nm and emission quantum yields of 0.26, 0.11, 0.12, and 0.56 at room temperature, respectively. In the solid state, 2 displays both a weak emission at 377 and an intense one at 474 nm with an overall emission yield 0.42. The difference in emission properties among complexes 1-5 suggests that both Cu--Cu interaction and coordination around the copper(I) center affect the excited state properties. A degassed solution of 2 in acetone gives a bright red emission with lambda(max) at 625 nm at room temperature. The difference absorption spectra of the triplet excited states of 1-5 in acetonitrile show broad absorption peaks at 340-410 and 850-870 nm.     

Tri- and tetracoordinate copper(I) complexes bearing bidentate soft/hard SN and SeN ligands based on 2-aminopyridine

The coordination properties of the EN ligands N-(2-pyridinyl)amino-diphenylphosphine sulfide, N-(2-pyridinyl)amino-diisopropylphosphine sulfide, N-(2-pyridinyl)amino-diphenylphosphine selenide, N-(2-pyridinyl)amino-diisopropylphosphine selenide towards copper(I) precursors CuX (X = Br, I), [Cu(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), and [Cu(CH(3)CN)(4)]PF(6) were studied. Treatment of CuX with EN ligands resulted in the formation of tricoordinate complexes of the type [Cu(κ(2)(E,N)-EN)X]. The reaction of [Cu(IPr)Cl] with EN ligands, followed by halide abstraction with AgSbF(6), afforded cationic tricoordinate complexes [Cu(κ(2)(S,N)-EN)(IPr)](+), while the reaction of [Cu(CH(3)CN)(4)](+) with two equivalents of EN ligands yielded tetrahedral complexes [Cu(κ(2)(E,N)-EN)(2)](+). Halide removal from [Cu(κ(2)(S,N)-SN)I] with silver salts in the presence of L = CH(3)CN and CNtBu afforded dinuclear complexes of the type [Cu(κ(2)(S,N),μ(S)-SN)(L)](2)(2+) containing bridging SN ligands. With the terminal alkynes HC≡CC(6)H(4)Me and HC≡CC(6)H(4)OMe, complexes of the formula [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)Me)](+) and [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)OMe)](+) were obtained. The mononuclear nature of these compounds was supported by DFT calculations. Most complexes were also characterized by X-ray crystallography.     

Bonding trends of thiosemicarbazones in mononuclear and dinuclear copper(I) complexes: syntheses, structures, and theoretical aspects

Reactions of copper(I) halides with a series of thiosemicarbazone ligands (Htsc) in the presence of triphenylphosphine (Ph(3)P) in acetonitrile have yielded three types of complexes: (i) monomers, [CuX(eta1-S-Htsc)(Ph3P)2] [X, Htsc = I (1), Br (2), benzaldehyde thiosemicarbazone (Hbtsc); I (5), Br (6), Cl (7), pyridine-2-carbaldehyde thiosemicarbazone (Hpytsc)], (ii) halogen-bridged dimers, [Cu2(mu2-X)2(eta1-S-Htsc)2(Ph3P)2] [X, Htsc = Br (3), Hbtsc; I (8), furan-2-carbaldehyde thiosemicarbazone (Hftsc); I (11), thiophene-2-carbaldehyde thiosemicarbazone (Httsc)], and (iii) sulfur-bridged dimers, [Cu2X2(mu2-S-Htsc)2(Ph3P)2] [X, Htsc = Cl (4), Hbtsc; Br (9), Cl (10), pyrrole-2-carbaldehyde thiosemicarbazone (Hptsc); Br (12), Httsc]. All of these complexes have been characterized with the help of elemental analysis, IR, 1H, 13C, or 31P NMR spectroscopy, and X-ray crystallography (1-12). In all of the complexes, thiosemicarbazones are acting as neutral S-donor ligands in eta()S or mu2-S bonding modes. The Cu...Cu separations in the Cu(mu2-X)2Cu and Cu(mu2-S)2Cu cores lie in the ranges 2.981(1)-3.2247(6) and 2.813(1)-3.2329(8) Angstroms, respectively. The geometry around each Cu center in monomers and dimers may be treated as distorted tetrahedral. Ab initio density functional theory calculations on model monomeric and dimeric complexes of the simplest thiosemicarbazone [H2C=N-NH-C(S)-NH2, Htsc] have revealed that monomers and halogen-bridged dimers have similar stability and that sulfur-bridged dimers are stable only when halogen atoms are engaged in hydrogen bonding with the solvent of crystallization or H2O molecules.     

Scope and limitation of organocuprates, and copper or nickel catalyst-modified Grignard reagents for installation of an alkyl group onto cis-4-cyclopentene-1,3-diol monoacetate

Alkylation of the title compound 1 was investigated with two types of reagents. One is a copper reagent derived from R(T)MgX (X = Cl, Br) and CuX (X = CN, I) and the other is R(T)MgX in the presence of a copper or a nickel catalyst. First, butylation was studied with BuCu(CN)(MgX), Bu(2)Cu(CN)(MgX)(2), BuMgX/CuCN (10 mol %), BuCu (derived from BuMgCl and CuI), and BuMgCl/CuI (10 mol %) in THF or Et(2)O. We found that trans 1,4-isomer 2a and/or trans 1,2-isomer 3a were produced exclusively with these reagents and that the stoichiometry of BuMgX/CuX and the choice of solvent were critical to attain high regioselectivity and efficient yield. Reaction with Bu(2)Cu(CN)(MgCl)(2) and BuMgCl/CuX (X = CN, I; 10 mol %) both in THF produced 2a with 93-94% regioselectivity in 87-92% yields. On the other hand, BuCu(CN)(MgX) in THF, Bu(2)Cu(CN)(MgX)(2) in Et(2)O, and BuMgX/CuCN (10 mol %) in Et(2)O furnished 3a in good yields with >90% selectively, irrespective of X of BuMgX. In the nickel-catalyzed butylation of 1 with BuMgCl, NiCl(2)(dppp) among NiCl(2)(tpp)(2), NiCl(2)(dppf), and NiCl(2)(dppp) furnished the best result to produce 2a. The CuCN-based protocol was then applied to other alkyl Grignard reagents, which include Me, Et, (CH(2))(3)Ph, c-C(6)H(11), (CH(2))(6)OMOM, (CH(2))(9)CH=CH(2), and CH(2)Ph as the alkyl group (R(T)). In addition, the Mitsunobu inversion of 2a and 3a afforded the corresponding cis isomers stereoselectively with AcOH as an acid at -78 degrees C in toluene for 2a and with 4-(NO(2))C(6)H(4)COOH in THF at r.t. for 3a. No racemization during the alkylation was confirmed by the reaction using (1R,3S)-1 (>99% ee) to produce (1S,4S)-2a and (1S,2S)-3a, respectively.     

Two heptacopper(II) disk complexes with a [Cu(7)(μ(3)-OH)(4)(μ-OR)(2)](8+) core

The reaction of CuX(2) (X(-) ≠ F(-)) salts with 1 equiv of 3-pyridyl-5-tert-butylpyrazole (HL) in basic methanol yields blue solids, from which disk complexes of the type [Cu(7)(μ(3)-OH)(4)(μ-OR)(2)(μ-L)(6)](2+) and/or the cubane [Cu(4)(μ(3)-OH)(4)(HL)(4)](4+) can be isolated by recrystallization under the appropriate conditions. Two of the disk complexes have been prepared in crystalline form: [Cu(7)(μ(3)-OH)(4)(μ-OCH(2)CF(3))(2)(μ-L)(6)][BF(4)](2) (2) and [Cu(7)(μ(3)-OH)(4)(μ-OCH(3))(2)(μ-L)(6)]Cl(2)·xCH(2)Cl(2) (3·xCH(2)Cl(2)). The molecular structures of both compounds as solvated crystals can be described as [Cu?Cu(6)(μ-OH)(4)(μ-OR)(2)(μ-L)(6)](2+) (R = CH(2)CF(3) or CH(3)) adducts. The [Cu(6)(μ-OH)(4)(μ-OR)(2)(μ-L)(6)] ring is constructed of six square-pyramidal Cu ions, linked by 1,2-pyrazolido bridges from the L(-) ligands and by basal, apical-bridging hydroxy or alkoxy groups, while the central Cu ion is bound to the four metallamacrocyclic hydroxy donors in a near-regular square-planar geometry. The L(-) ligands project above and below the metal ion core, forming two bowl-shaped cavities that are fully (R = CH(2)CF(3)) or partially (R = CH(3)) occupied by the alkoxy R substituents. Variable-temperature magnetic susceptibility measurements on 2 demonstrated antiferromagnetic interactions between the Cu ions, yielding a spin-frustrated S = (1)/(2) magnetic ground state that is fully populated below around 15 K. Electrospray ionization mass spectrometry, UV/vis/near-IR, and electron paramagnetic resonance measurements imply that the heptacopper(II) disk motif is robust in organic solvents.     

Pathway from chain to dimer in Cu(I) camphor hydrazone complexes

The chemical reactivity, molecular structure, and surface characteristics of Cu(I) camphor hydrazone compounds indicate that exist a structural pathway for conversion of coordination polymers into dimers and vice versa. By X-ray diffraction analysis two polymorphic forms of the chain compound [{CuCl}(2)(Me(2)NNC(10)H(14)O)](n) were identified that essentially differ in the structural arrangement and geometry of the non-linear copper atom. The characterization of the dimer complexes [{Cu(Me(2)NNC(10)H(14)O)}(2)(μ-X)(2)] (X = Cl or Br) was also achieved by X-ray diffraction analysis showing the unusual arrangement of the camphor hydrazone ligands that occupy the same side of the molecule. Bond lengths and torsion angles show that one of the polymorphic forms is structurally close to the related dimer. The surface composition of the coordination polymers [{CuX}(2)(YNC(10)H(14)O)](n) (X = Cl, Y = NMe(2), NH(2); X = Br, Y = NH(2)) and dimers [{Cu(Me(2)NNC(10)H(14)O)}(2)(μ-X)(2)] (X = Cl or Br) studied by X-ray Photoelectron Spectroscopy corroborate the molecular properties and the reactivity trend.     

Mechanochemical synthesis in copper(II) halide/pyridine systems: single crystal X-ray diffraction and IR spectroscopic studies

Whereas complexes of divalent metal halides (X = Cl, Br, I) with/from pyridine commonly crystallise as trans-[M(py)(4)X(2)]·2py, M on a site of 222 symmetry in space group Ccca, true for CuCl(2) and CuBr(2) in particular, the copper(II) iodide adduct is of the form [Cu(py)(4)I]I·2py, Cu on a site of mm2 symmetry in space group Cmcm, and five-coordinate (square-pyramidal), the same cationic species also being found in 2[Cu(py)(4)I](I(3))·[(py)(2)Cu(μ-I)(2)Cu(py)(2)] (structurally defined). Bromide or N-thiocyanate may be substituted for the unbound iodide ion in the solvated salt, resulting in complexes which crystallize in space group Ccca, but with both anions and the metal atom disordered. In [Cu(py)(4)(I(3))(2)], a pair of long Cu···I contacts approach a square-planar Cu(py)(4) array. Assignments of the ν(CuN) and ν(CuX) (X = Br, I, SCN) bands in the far-IR spectra are made, the latter with the aid of analogous assignments for [Cu(py)(2)X(2)] (X = Cl, Br), which show a dependence of ν(CuX) on the Cu-X bond length that is very similar to that determined previously for copper(i) halide complexes. The structure of the adventitious complex [(trans-)(H(2)O)(py)(4)CuClCu(py)(4)](I(3))(3)·H(2)O is also recorded, with six- and five-coordinate copper atoms; rational synthesis provides [{Cu(py)(4)}(2)(μ-Cl)](I(3))(3)·H(2)O with one water molecule less. In [{Cu(py)(4)Cl}((∞|∞))](I(3))·3py, square pyramidal [Cu(py)(4)Cl](+) cations, assisted by Cl···Cu interactions, stack to give rise to infinite polymeric strings. Several of these compounds were prepared mechanochemically, illustrating the applicability of this method to syntheses involving redox reactions as well as to complex syntheses involving up to five components. The totality of results demonstrates that the [Cu(II)(py)(4)] entity can be stabilized in an unexpectedly diverse range of mononuclear and multinuclear complexes through the presence of lattice pyridine molecules, the bulky triiodide ion, or a combination of both.     

Construction of a porous homochiral coordination polymer with two types of Cu(n)I(n) alternating units linked by quinine: a solvothermal and a mechanochemical approach

The polymer network: The reaction of quinine (QN) with CuI under solvothermal, as well as liquid-assisted grinding, conditions afforded a unique 1D homochiral coordination polymer {[Cu(4)(μ(3)-I)(4)(QN)(2)][Cu(3)(μ(3)-I)(2)(μ(2)-I)(QN)(2)](2)}(n), containing both triangular Cu(3)I(3) and cubane Cu(4)I(4) clusters as connecting nodes (see scheme). Van der Waals interactions between the adjacent 1D polymer chains lead to an extended quasi-honeycomb homochiral pillared 3D network with solvent-free 1D channels.     

Trinuclear-based copper(I) pyrazolate polymers: effect of trimer π-acid···halide/pseudohalide interactions on the supramolecular structure and phosphorescence

Under different situations, solvothermal reactions of 3,5-diethyl-4-(4-pyridyl)-pyrazole (HL) with CuX or CuX(2) (X = Cl, Br, I, and SCN) afforded five copper(I) coordination polymers, {CuX[CuL](3)·solvent}(n) (X = Cl, 1; Br, 2; I, 3; X = SCN and solvent = MeCN, 4) and {Cu(2)I(2)[CuL](3)}(n) (5). X-ray diffraction analyses show that all the complexes have trinuclear [CuL](3) (referred as Cu(3)) secondary building units featuring planar nine-membered Cu(3)N(6) metallocycles with three peripheral pyridyl groups as connectors, which are further linked by CuX or Cu(2)X(2) motifs to generate single- or double-strand chains. Interestingly, the Cu(I) atoms within the Cu(3) units in 1-5 behave as coordinatively unsaturated π-acid centers to contact soft halide/pseudohalide X atoms of CuX and Cu(2)X(2) motifs, which lead to novel sandwich substructures of [(Cu(3))(Cu(2)X(2))(Cu(3))] (X = Br, I, and SCN) in 2-4. In addition, both the π-acid [Cu(3)]···X contacts and intertrimer Cu···Cu interactions contribute to the one-dimensional (1D) double-strand and 2D/3D supramolecular structures of 1-5. All of these complexes exhibit high thermostability and bright solid-state phosphorescence upon exposure to UV radiation at room temperature. The emissions arise from the mixtures of metal-centered charge transfer, metal to ligand charge transfer, and halide-to-ligand charge transfer excited states, and can be tuned by intermolecular π-acid [Cu(3)]···halide/pseudohalide contacts.     

Suppression of realgar cage degradation during complexation: formation of hybrid coordination polymers with As4S4, PAs3S3, and Cu(I) halide building blocks

Realgar, As(4)S(4), reacts with Cr(CO)(5)THF under cage degradation to give As(4)S(3)·Cr(CO)(5) (1). The reverse structural change is found if solutions of 1 in CH(2)Cl(2) react with equimolar amounts of PAs(3)S(3)·W(CO)(5) and CuX (X = Cl, Br, I) in CH(3)CN under biphasic diffusion conditions. The resulting coordination polymers 2-4 contain a reconstituted realgar molecule along with the PAs(3)S(3) cage. The crystal structures of (CuX)(As(4)S(4))(PAs(3)S(3)) (X = Cl: 2; Br: 3) are characterized by one-dimensional (1D) (CuX)(As(4)S(4)) strands, which are formed by alternating As(4)S(4) cages and CuX dumbbells. Terminal PAs(3)S(3) molecules are coordinated to copper by apical phosphorus and bridging realgar through sulfur. The As(3) triangles of the resulting (CuX)(As(4)S(4))(PAs(3)S(3)) strands interact with halides of neighbored strands to give a folded three-dimensional (3D) network. The structure of (CuI)(3)(As(4)S(4))(PAs(3)S(3)) (4) contains 1D (Cu(3)I(3))(n) strands as backbones, which are bridged by sulfur atoms of two η(1:2)-As(4)S(4) molecules while PAs(3)S(3) confines the resulting sheet. The As(3) triangles at the surface of the layers interact with iodide of the next layer to form a layered 3D network.     

Homogeneous oxidative coupling catalysts: stoichiometry and product characterization of the oxidation of copper(I) complexes [(Pyr) n CuX]4 ( n = 1 or 2, Pyr = pyrrolidine,X = Cl,Br or I) by dioxygen in aprotic media

Copper(I) halides react quantitatively with pyrrolidine (Pyr) in dioxygen-free methylene chloride or nitrobenzene to form tetranuclear copper(I) complexes [(Pyr) _n CuX]₄O₂; n = 1 or 2, X = Cl, Br or I. These complexes are very soluble and completely reduce dioxygen to a dioxo bridging ligand with stoichiometry, Δ[Cu(I)]/Δ[O₂] = 4.0. Analytical and cryoscopic data establish the formation of discrete tetranuclear products. The stable oxo solids [(Pyr) _n CuX]₄O₂ mimic the tyrosinase copper protein and are homogeneous oxidative coupling catalysts for phenols. Electronic transition spectra in the near infrared for [(Pyr) _n CuX]₄O₂ are explained as charge transfer from a minimum of three halo ligands to a copper(II) site, (LMCT). Therefore, one can expect a higher molar absorptivity when X = I, as in the [(Pip) _n CuX]₄O₂ system. However, molar absorptivity is about half of expected. The lower absorptivity explains the step structure of [(Pyr) _n CuI]₄O₂, in which only two copper(II) sites, instead of four as in [(Pyr) _n CuX]₄O₂, X = Cl or Br, have three iodo ligands per copper center. In addition to infrared and electronic spectra for [(Pyr) _n CuI]₄O₂, EPR bands are observed, and it is concluded that two different types of copper(II) sites are present as represented in scheme 1.     

Luminescent copper(I) halide adducts of [Au(im(CH2py)2)2]PF6 exhibiting short Au(I)···Cu(I) separations and unusual semibridging NHC ligands

The picolyl-substituted NHC complex [Au(im(CH(2)py)(2))(2)]PF(6) (1) reacts with two equivalents of copper(I) halides, affording compounds [Au(im(CH(2)py)(2))(2)(CuX)(2)]PF(6) (X = Cl, 2; Br, 3; I, 4). Each complex contains a nearly linearly coordinated [Au(NHC)(2)](+) center where the two picolyl groups on each im(CH(2)py)(2) ligand chelate a single copper atom. The Cu(I) center resides in a distorted tetrahedral environment and is coordinated to two pyridyl groups, a halide ion, and a gold metalloligand. The Au(I)-Cu(I) separations measure 2.7030(5), 2.6688(9), and 2.6786(10) ? for 2-4, respectively. Additionally, each Cu(I) center is further coordinated by a semibridging NHC ligand with short Cu-C separations of ~2.3 ?. In solution, these complexes dissociate the Cu(I) ion. In the solid state, 2-4 are photoluminescent with respective emission maxima of 512, 502, and 507 nm. The reaction of [Au(im(CH(2)py)(2))(2)]PF(6) with four equivalents of CuBr afforded the coordination polymer {[AuCu(2)Br(2)(im(CH(2)py)(2))(2)]Br·3CH(3)CN}(n) (5). This polymeric complex contains [Au(NHC)(2)](+) units interconnected by Cu(2)Br(2) dimers. In 5, the Au-Cu separations are long at 4.23 and 4.79 ?, while the Cu-Cu distance is considerably shorter at 2.9248(14) ?. In the solid state, 5 is photoluminescent with a broad band appearing at 533 nm.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.