Flexible cellulose derivative PDLC type cells

In this work we perform a study of 250 ≈ μm thick flexible electro-optical PDLC type cells made from a biocompatible cellulose derivative film and several conductive substrates. The deposition of an ITO layer by reactive thermal evaporation on a polymeric substrate was referred to in the literature very recently and this type of coated substrate was used in the present work. In order to consider the influence of the substrates on the electro-optical behaviour of the cells, five cells were made using different substrates (three flexible polymers and two glass for comparison). Three of the substrates were coated under the same conditions, and the other two were commercially available substrates.     

Flexible cellulose derivative PDLC type cells

In this work we perform a study of 250 μm thick flexible electro-optical PDLC type cells made from a biocompatible cellulose derivative film and several conductive substrates. The deposition of an ITO layer by reactive thermal evaporation on a polymeric substrate was referred to in the literature very recently and this type of coated substrate was used in the present work. In order to consider the influence of the substrates on the electro-optical behaviour of the cells, five cells were made using different substrates (three flexible polymers and two glass for comparison). Three of the substrates were coated under the same conditions, and the other two were commercially available substrates.     

Complex study of reorientational dynamics of the liquid crystal in PDLC films

Morphological, electro-optical and switching properties of polyester resin/nematic liquid crystal composite films have been studied for varying composition (10-40 wt% of LC), temperature (20-50 C), film thickness (10-75 mum) and UV curing time of the matrix (0.25-12 min). The PDLC films were formed by LC separation in a UV polymerization process of the thin layer of oligoester resin (liquid crystal mixture) between ITO coated glass plates. The electro-optical and response behaviour based on the electric field controlled light scattering of the composite films was observed. The results were interpreted in terms of effective anchoring strength at the interface of the polymer and liquid crystal depending either on the area fraction of the interface in the composite film (dependent on the size and shape of the liquid crystal droplets) or the stiffness and resistivity of the polyester resin changing in the course of the crosslinking polymerization.     

Preparation of polymer-dispersed liquid crystal doped with indium tin oxide nanoparticles

To study polymer-dispersed liquid crystal (PDLC) films doped with indium tin oxide (ITO) nanoparticles (NPs), samples were prepared by ultraviolet-initiated polymerisation based on the thiol–acrylate system. Owing to the interaction between PDLC system and ITO NPs, the content and the size of ITO NPs are the main determinants to the microstructure which plays an essential role on the electro-optical and anti-infrared properties of the PDLC films. In the polymer matrix, a novel microstructure consisting of a dense surface, micron-sized meshes and submicron meshes is found to benefit the better performances of the low driven voltage (20.7 V), the relatively high contrast ratio (8.3) and the lowest transmittance(500–2500 nm) on average at about 3.55% with maximum of merely 7.6%. Thus, it lays a solid foundation for the further investigations on the microstructure and the performance of the PDLC films. Meanwhile, it is proved that the PDLC film, improved performance through doping ITO NPs, is promising to be a superior choice in the field of energy-saving.     

Improvement of the electro-optical properties of nematic liquid crystals doped with strontium titanate nanoparticles at various doping concentrations

ABSTRACT

In this study, we doped homogenous aligned nematic liquid crystal (NLC) systems with strontium titanate (SrTiO₃) nanoparticles (NPs), and investigated the impact of doping concentration on the NLC’s electro-optical (EO) properties. SrTiO₃ NP-doped NLC cells maintained a high optical transmittance of 77.51% to 78.41% compared to pure NLC cells (78.09%). At a 0.1 wt.% SrTiO₃ NP doping concentration, twisted-nematic (TN)-LC cells exhibited enhanced EO performance, with a reduced threshold voltage from 1.70V to 1.61V and a shorter response time from 17.03 ms to 10.66 ms without optical defects and degradations. We also observed an improvement in thermal endurance for doping concentrations of 0.05 and 0.1 wt.%.     

Analysis of electro-optical and dielectric parameters of TiO2 nanoparticles dispersed nematic liquid crystal

The present investigation is focused on to find out the role of TiO₂ nanoparticles (NPs) on altering the dielectric and electro-optical parameters of nematic liquid crystal (NLC). In addition to this, we also optimized the concentration of dopant (0.25 wt%) for a saturation value of permittivity and dielectric anisotropy in the doped system. Dielectric spectroscopy has been performed with the variation of frequency and temperature to investigate the various dielectric parameters, which demonstrate that the investigated NLC is of positive dielectric anisotropy; the observed result shows a decrement in the value of relative permittivity and dielectric anisotropy; however, the permittivity value increases for higher concentration of dopant but remains less than that of pure NLC. Electro-optical measurements have also been performed to compute the optical response of pure and dispersed NLC. It is found that optical response decreases for the NP-doped systems. This optimized concentration of NPs in NLC matrix can have various credential applications in the field of active matrix display and holography.     

Microstructure analysis of sol‐gel‐derived nanocrystalline ITO thin films

The technique for ITO (Tin‐doped indium oxide) thin films by sol‐gel process is presented in this paper. After annealing at 500° for 15 min, ITO gel films get transformed into nanocrystallined indium tin oxide films. We studied the microstructure of ITO thin film which is closely related to optical and electrical properties. The microstructure of ITO thin film can be observed through high‐resolution transmission electronic spectroscopy (HRTEM) and the Fast Fourier Transform (FFT) technique. The film is nanocrystallite with grain sizes about 20 nm. Also, the surface chemical components were studied by XPS spectra. The transmission and the resistivity of ITO films is 97.0% and 3.5 × 10^?3 Ω?cm, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Co对NiOxHy薄膜电致变色性能的影响

本文利用阴极化电沉积法在抛光镍极及ＩＴＯ玻璃表面制备了含Ｃｏ量为１６．２％的ＮｉＯｘＨｙ薄膜,薄膜厚度分别为４２ｎｍ、２１ｎｍ,采用透射光谱以及线性电位扫描、交流阻抗和阳极稳态极化曲线等测试技术,考察了Ｃｏ对ＮｉＯｘＨｙ薄膜电致变色性能的影响,光谱测试范围为３００￣２５００ｎｍ。结果发现：Ｃｏ能降低薄膜着色态在可见光区及部分近红外区的透过率,通过电压调节不仅可以调光而且可望能够控温;同时Ｃｏ还能降     

汞修饰掺锡三氧化二铟导电玻璃光透薄层电化学池的设计

报道了汞膜修饰掺锡三氧化二铟导电玻璃电极的制备及其薄层电化学池的设计，测试限电极和薄层的光、电化学性能，在水溶液中，与基底电极相比，该电极的负电位范围增加了７００ｍＶ，并表现出普通汞电极的电化学 性质，以此电极制得的电极制得的薄层层池可适用于氧化还原电位较负的电化学过程的光谱电化学研究及金属离子的电化学分析。     

不同光滑度立方体氧化铁对液晶电光性能的改善

向列相液晶被广泛应用于液晶显示中,但是由于杂质的存在,会导致液晶的驱动电压变大,增加能耗。 为了降低阈值电压和饱和电压,通常向液晶中添加纳米颗粒来提高电光性能。 本文利用水热法制备了表面粗糙和光滑的两种立方体Fe₂O₃纳米颗粒,其形貌均匀,尺寸约550 nm。 将二者分别掺杂到向列相液晶E7中,结果表明,粗糙立方体Fe₂O₃/E7复合体系具有比光滑立方体Fe₂O₃/E7复合体系和向列相液晶E7更优的电光性能,且在掺杂质量分数为0.4%时,其电光性能达到最优,阈值电压和饱和电压分别降低9.9%和11.6%,对比度增大80%,响应时间降低至6.0 ms。 这归因于粗糙立方体Fe₂O₃具有足够的表面积和表面所带电荷更多,所以会更易吸附体系中的杂质离子和减弱杂质离子的屏蔽作用,从而提高了电光性能。     

氮掺杂二氧化钛-氧化镍双层薄膜的光电致色特性

以金属钛为靶材、O2/N2/Ar混合气氛为溅射气体,在导电玻璃(ITO)表面磁控溅射一层薄膜,再经300-500℃退火处理制备了氮掺杂TiO2薄膜.采用X射线衍射(XRD)、X光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见吸收光谱等对薄膜的微观结构、光学特性和光电化学性能等进行了研究.进而采用化学沉积的方法在TiO2-xNx薄膜表面沉积上一层多孔NiO薄膜,研究表明,制备的ITO/TiO2-xNx/NiO双层薄膜具有明显的光电致色特性,400℃退火处理的氮掺杂TiO2薄膜具有最高的光电流响应,经氙灯照射1h后,薄膜从无色变成棕色,500nm波长处光透过率从79.0%下降至12.6%.     

Fast response in TN liquid-crystal cells: effect of functionalised carbon nanotubes

The optical response time of a nematic liquid crystal (NLC) decreases due to incorporation of carbon nanotubes (CNTs) in the liquid-crystal host. Such reduction is believed to be due to an increase in the elastic constant of the nanotube-doped LC system. In this paper, we present the effect on optical response due to doping an NLC with octadecylamine functionalised single-walled carbon nanotubes (ODA-SWCNT) in a twisted alignment mode. The electro-optic switching amplitude of ODA-SWCNT nanocomposites of NLC decreases compared to pure NLC. A fast response time is observed with an increase in the concentration of ODA-SWCNT in NLC host. Additionally, optical response of pure NLC in a twisted nematic (TN) cell fabricated using mixtures of polyimide (PI) and ODA-SWCNT as an alignment layer is investigated. The optical response time decreased by ~75% in a TN cell fabricated with a mixture of PI and ODA-SWCNT compared to that of a TN cell prepared using a pure PI alignment layer. The presence of ODA-SWCNT in the alignment layer enhances the surface anchoring of the NLC molecules leading to an increase in the elastic constant and a decrease in the optical response time of NLC.     

Influence of the substrate type on the microstructural,optical and electrical properties of sol–gel ITO films

Indium tin oxide (ITO) is recognized as the best transparent and conductive material [transparent conducting oxide (TCO)] until now and its properties are dependent on the preparation method. In the present work ITO films with In:Sn atomic ratio 9:1 were prepared by a sol–gel route on different substrates (microscope glass slides, microscope glass covered with one layer of SiO₂ and Si wafers) for TCO applications. The multilayer ITO films were obtained by successive deposition by the dip-coating method and the films were characterized from the structural, morphological, optical, and electrical points of view using X-ray diffraction, scanning electron microscopy, atomic force microscopy, spectroscopic ellipsometry and by Hall effect measurements, respectively. The results showed that the thickness, optical constants and carrier numbers depend strongly on the type of substrate, number of deposited layers and sol concentration. The optical properties of ITO films are closely related to their electrical properties. The enhancement of the conductivity was possible with the increase of crystallite size (which occurred after thermal treatment) and with the reduction of surface roughness.     

Observation of Organic Thin Film Surface by Atomic Force Microscopy

The 8-hydroxyquinoline neodymium(Ndq3) organic thin films deposited on the cleaned indium/tin oxide (ITO) at different deposition rates with the same vacuity (133.3×10^-5 Pa) were revealed by atomic force microscopy (AFM). Organic devices with one layer of Ndq3 as the e-type conductive material at different deposition rates sandwiched between ITO and aluminum electrodes have been fabricated. respectively. Evidence suggests that the current-voltage (I-V) characteristics were determined by the uniformity of organic film which was controlled by the deposition conditions.     

An investigation of the microstructure,optical and electrical properties of ZITO thin film using the sol–gel method

The multi-compound ZITO transparent conductive oxide (TCO) thin films were synthesized using the sol–gel method. The ZITO thin films with various volume ratios of ZnO to ITO (1:1, 2:1 and 9:1) were crystallized at different temperatures (600–700 °C). The results showed that the crystalline characteristics and optical transmittance were mainly dependent on ITO content and crystallization. Notably, the 650 °C Z₉ITO film not only had better conductivity but also possessed excellent optical transmittance. In addition, the surface roughness of the ZITO films and optoelectric properties of IZO (indium doped ZnO) films were analyzed to confirm the contribution of indium dopants on the optical transmittance. Also, the ZITO films were subjected to the effects of indium and tin dopants and this improved the related characteristics of ZnO films.     

Dynamic holographic liquid crystal device containing nanoscale CuPc film

In this paper, CuPc-film-containing nematic liquid crystal (NLC) cells were fabricated, and dynamic holographic gratings recorded in the NLC cells were studied. The dependence of the diffraction efficiency on the applied voltage, light intensity, and the thicknesses of CuPc and NLC film was investigated. The high diffraction efficiency about 30% and the moderate build-up and erasing time in the order of magnitude of 0.1 s were achieved. The asymmetric energy transferring in two-beam coupling indicates photorefractive (PR) nature of the grating. The results of the photoinduced change of birefringence experiments suggest that the surface charge at the interface between the CuPc film and the NLC film plays a crucial role in the PR effect and the CuPc–NLC interface is mainly responsible for the formation of modulated surface charge layer and enables the photoelectric function of the NLC device. Our research may provide a new material option to optimise and develop NLC device for optical information processing and storage.     

The electro-optic properties of colloidal silica filled nematics

The optical and electro-optical properties of filled nematic liquid crystals, nematic systems with added colloidal silica nanoparticles ( ≤6%), have been studied. The macroscopic near IR birefringence of cells constructed from these materials was measured for wavelengths between 2 and 5 mum, and a wavelength independent value of 0.16 was obtained. The visible optical behaviour of cells formed with untreated ITO substrates using both filled nematic, and filled nematic and dichroic dyes was similar to those observed in polymer dispersed liquid crystals. At an electric field of 1-2 V μm -1 , the cells were highly transmitting, while at low fields they were highly scattering. The effects of colloidal silica nanoparticle concentration, cell thickness, electric field and substrate preparation (rubbed polyimide versus no surface treatment) on the electro-optical behaviour of these cells were studied.     

The electro-optic properties of colloidal silica filled nematics

The optical and electro-optical properties of filled nematic liquid crystals, nematic systems with added colloidal silica nanoparticles (? 6%), have been studied. The macroscopic near IR birefringence of cells constructed from these materials was measured for wavelengths between 2 and 5 mum, and a wavelength independent value of 0.16 was obtained. The visible optical behaviour of cells formed with untreated ITO substrates using both filled nematic, and filled nematic and dichroic dyes was similar to those observed in polymer dispersed liquid crystals. At an electric field of 1–2 V μm ^-1, the cells were highly transmitting, while at low fields they were highly scattering. The effects of colloidal silica nanoparticle concentration, cell thickness, electric field and substrate preparation (rubbed polyimide versus no surface treatment) on the electro-optical behaviour of these cells were studied.     

Fabrication and optical properties of gallium phosphide nanoparticulate thin film

The gallium phosphide (GaP) nanoparticulate thin films were fabricated by colloidal suspensions deposition with GaP nanoparticles dispersed in N,N-dimethylformamide (DMF). The microstructure and optical properties of the film have been studied by scanning electron microscopy, high resolution transmission electron microscope, and optical absorption and fluorescence spectra. The morphology of the film was found to be composed of nanoparticle aggregates, and with an irregularly rough surface. From the result of fluorescence, it can be established that the film not only retains the violet and blue light emissions which ascribed to transition from conduction band to valence band of gallium phosphide particles, but has an excellent luminescence property. The correlation between the optical properties and the microstructure of the thin film is discussed.     

Light-induced hydrodynamic reorientation of hybrid aligned nematic liquid crystals caused by direct volume expansion

The dynamics of the direct volume expansion mechanism of light-induced hydrodynamic motions in hybrid-oriented nematic liquid crystal (NLC) have been studied experimentally. It was shown that heating caused by the absorption of a laser beam results in expansion of a NLC volume and induces hydrodynamic flow in a planar capillary. The hydrodynamic flow reorients the NLC molecules and thus the optical properties of the NLC layer are changing. A change of the tilt direction of the NLC director is demonstrated experimentally, and it is shown that hybrid-oriented NLC could be considered as ‘flexible ribbon’. Velocity gradient brings about an increase of curvature when hydrodynamic flow velocity is directed out of the ‘flexible ribbon’s’ curvature. The ‘flexible ribbon’ reverses its curvature when velocity is directed into ‘flexible ribbon’s’ curvature.