An efficient photoinduced iodoperfluoroalkylation of carbon-carbon unsaturated compounds with perfluoroalkyl iodides

Dependent on the selection of the light sources employed, the photoinduced iodoperfluoroalkylation of a variety of unsaturated compounds takes place efficiently via a radical mechanism. Upon irradiation with a xenon lamp through Pyrex (hnu >300 nm), terminal alkenes (R-CH=CH2) and alkynes (R-C triple bond CH) undergo iodoperfluoroalkylation with perfluoroalkyl iodides (RF-I) regioselectively, providing R-CH(I)-CH2-RF and R-C(I)=CH-RF, respectively. In the case of terminal allenes (R-CH=C=CH2), the photoinduced iodoperfluoroalkylation occurs selectively at the terminal double bond, giving the corresponding beta-perfluoroalkylated vinylic iodides (R-CH=C(I)-CH2-RF) in good yields. The photoinitiated reaction of vinylcyclopropanes (c-C3H5-C(R)=CH2) with RF-I proceeds via the rearrangement of cyclopropylcarbinyl radical intermediates to the homoallylic radical intermediates, and the corresponding 1,5-iodoperfluoroalkylated products (I-(CH2)2CH=C(R)-CH2-RF) are obtained in high yields. Isocyanides (R-NC), as C-N unsaturated compounds, also undergo the xenon-lamp-irradiated iodoperfluoroalkylation to provide the corresponding 1,1-adducts (R-N=C(I)-RF) in good yields. Furthermore, the present photoinitiation procedure can be applied to the iodotrifluoromethylation of unsaturated compounds, when the xenon-lamp-irradiated reactions are conducted under the refluxing conditions of excess CF3-I.     

Fluoro-ketones IV. Synthesis of phenylperfluoroalkyl ketones - mechanism of reaction between phenyllithium and fluoroesters

Although fluorine containing ketones (R_fC(O)R_f and R_fC(O)R, R_f = perfluoroalkyl) have been prepared from the reaction between organolithium reagents and perfluoroalkyl esters, the reaction has not found general applicability. Variable yields of ketones and co-production of secondary and tertiary alcohol by-products have in most instances been experienced. We have examined in more detail the factors e.g., temperature, mode of addition and perfluoroalkyl ester structure which influence ketone product and by-products formation. By controlling experimental conditions excellent yields of C₆H₅C(O)R_f compounds can be attained. A lithium salt of a hemiketal (II) has been isolated and shown to be the active intermediate in the production of the ketone. The stability of the salt and its potential reaction with the solvent dictates the type of reaction products. Low temperature favors stability of the lithium salt of the hemiketal whereby high yields of ketones are produced on hydrolysis.     

A new method for the preparation of α-(perfluoroalkyl) carbonyl and γ-(perfluoroalkyl)-α,β-unsaturated carbonyl compounds

R_fI(Ph)OSO₂CF₃ or R_fI(Ph)OSO₃H smoothly reacted with various trimethylsilyl enol ethers under mild conditions to give α-(perfluoroalkyl) carbonyl and γ=(perfluoroalkyl)-α,β-unsaturated carbonyl compounds in high yields.     

Synthesis of organic–inorganic chiral block poly(methylphenylsilane) functional polymers,and study of their optical and chiroptical properties

Polysilanes upon UV irradiation give rise to silyl macroradicals which are capable to initiate radical polymerization. Hence, chiral block functional polysilanes were synthesized by UV irradiation of poly(methylphenylsilane) (PMPS) with a vinyl chiral monomer, (R)‐N‐(1‐phenylethyl)methacrylamide (R‐NPEMAM). The synthesized copolymer samples were characterized by FTIR, NMR, and UV–vis spectroscopy. The number and weight average molecular weights of PMPS and synthesized chiral‐block‐PMPS were measured by GPC analysis. Two glass transition temperatures (T_g) of the synthesized materials clearly indicate the formation of chiral‐block‐PMPS copolymers. SEM analysis also indicated the synthesized organic–inorganic block copolymers. The optical and chiroptical properties of the synthesized materials were studied. The cotton effect is observed not only at 276 nm due to aromatic ring of the chiral monomer units but also at 325 nm which is associated with the Si–Si conjugation of PMPS block of synthesized functional polysilanes. Such tunable chirality may find potential application in optoelectronics. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3626–3634     

Some perfluoroalkyl grignard reagents and their derivatives

Some perfluoroalkyl Grignard reagents have been prepared in high yields through halogen-metal exchange reactions between perfluoroalkyl iodides (R_fI) and EtMgBr. Derivatization with Me₃SiCl gave satisfactory yields of the corresponding silylated products in THF. However, ether was a very poor solvent for reaction of R_fMgBr with these chlorosilanes. The exchange reaction between R_fI and EtMgBr was nearly quantitative in ether as evidenced by high yields of the 1-hydroperfluoroalkanes upon hydrolysis, but the major production from the attempted silylation in ether was a trans- vinyl bromide [1], i. e.

Spectral data are presented for several new compounds.     

Fluoroalkylation of aromatic compounds

Perfluoroalkylation of benzene, halobenzenes, pyridine, furan and thiophene has been accomplished through thermolysis of perfluoroalkyl iodides (CF₃I, n-C₁₀F₂₁I and R_fOR_fI) in the presence of the appropriate aromatic compound. Yields of alkylated products vary depending on temperature, presence of an HI acceptor and reactants ratio. Isomeric mixtures are obtained with halobenzenes, pyridine and thiophene. Furan however yields only the alpha substituted product.     

Reactions of Tris(Perfluoroalkyl)Difluorophosphoranes and Their Derivatives with Nucleophilic Reagents

Abstract

This paper is concerned with the reactions of (R_f)₃PF₂ and (R_f)₃PO with N-, 0-, C-nucleophiles and fluoride ion. Either the replacement of one or two perfluoroalkyl radicals by different functional groups or the addition of reagent to electrophilic phosphorus occurs. These phosphinic oxides and phosphoranes readily add fluoride-ion with the expansion of phosphorus coordination: the former produces phosphoranes OP a new type (R_f)₃P(F)O_?Cs₊, while the latter stable substituted fluorophosphates of general formula M ₊[(R_f)₃ PF₃]_?. Based on these salts it was possible to synthesize aryldiazonium tris(perfluoroalkyl)trifluorophosphates, whose thermal decomposition leads to the formation of substituted fluorobenzenes with high yields. The reaction is a convenient modification of the Shieman methd. The approaches of the synthesis of phosphoranes containing simultaneously both perfluoroalkyl groups and nonfluorin-ated radicals are developed due to the reactions of tris-(perf luoroalkyl)dif luorophosphoranes with the lithium-organic compounds. The replacement of either fluorine atom or perfluoroalkyl radical by the nonfluorinated group depends on the lithium reagent nature:     

Fluorination of perfluoroalkylsulfenyl chlorides,perfluorodialkyl disulfides and perfluorodialkyl sulfides with chlorine monofluoride

In reactions with perfluoroalkylsulfenyl chlorides (R_fSCl; R_f = F₃, C₂F₅, n-C₃F₇, n-C₄F₉) and perfluoroalkyl disulfides (R_fSSR_f′; R_f = R_f′ = CF₃, R_f = CF₃, R_f′ = C₂F₅) at 25°, chlorine monofluoride acts primarily as a chlorinating and fluorinating reagent to give the corresponding perfluoroalkylsulfur chloride tetrafluorides, R_fSF₄Cl, in good yields. However, small amounts of perfluoroalkylsulfur pentafluorides, R_fSF₅, are also obtained. A mixture of the cis and trans isomers of bis(trifluoromethyl)sulfur tetrafluoride and of trifluoromethyl pentafluoroethylsulfur tetrafluoride has been formed by the reaction of the corresponding bis(perfluoroalkyl) sulfides and chlorine monofluoride. The new perfluoroalkylsulfur chloride tetrafluorides are colorless, unpleasant smelling liquids. The infrared, mass and ¹⁹F NMR spectral data, as well as thermodynamic and elementary analysis data, are given for the new compounds.     

Action des perfluoroalkylcuivre(I) sur les perfluoroalkylethylenes

A series of new polyfluorinated dienes 3, containing the novel -CFCHCHCF-, pattern has been synthesized (50–70% yields) by reacting perfluoroalkyl iodides with perfluoroalkyl-ethylenes in the presence of copper. The monoalkenes R_fCFCHCH₂CF₂R′_f and the saturated compounds R_fCF₂CH₂CH₂CF₂R′_f were obtained by varying the experimental conditions. The ¹H and ¹⁹F NMR spectra are analysed and the reaction mechanism is discussed.     

Silver‐Catalyzed Formal Insertion of Arynes into RfI Bonds

An unprecedented silver‐catalyzed formal insertion of arynes into R_f?I (R_f=CF₃, C₂F₅) bonds has been developed. This protocol provides easy access to various ortho‐perfluoroalkyl iodoarenes under mild conditions. In this insertion reaction, an ionic atom‐transfer reaction of R_fI occurs, and a silver‐mediated metathesis process is involved in the efficient transfer of the electropositive iodine atom.     

Controlled synthesis of novel PbBiO<Subscript>2</Subscript>I microsphere structure towards photocatalytic degradation of bisphenol A

Novel visible-light-driven PbBiO₂I materials have been successfully synthesized through a one-pot ethylene glycol assisted solvothermal process in the presence of 1-hexyl-3-methylimidazolium iodide ([Hmim]I). The morphologies, compositions and properties of the PbBiO₂I materials were investigated by XRD, XPS, SEM, TEM, DRS and nitrogen adsorption–desorption isotherms. The results of SEM and TEM indicated that the as-prepared PbBiO₂I samples were microspheres with a diameter of about 1.5 μm assembled by nanosheets. The photocatalytic performance of the prepared PbBiO₂I materials was determined by colorless endocrine disrupting chemical bisphenol A (BPA) and antibiotic ciprofloxacin (CIP). PbBiO₂I materials have a very good visible light response with band gap of 1.98 eV, thus result in better photocatalytic degradation activity. Under the visible light irradiation for 3 h, about 72.5% of the BPA could be removed by PbBiO₂I microspheres. The main active species during the photodegradation process were determined to be superoxide radicals and holes.     

Heterogeneous Platinum‐Catalyzed CH Perfluoroalkylation of Arenes and Heteroarenes

Fluorinated organic compounds are gaining increasing interest for life science applications. The replacement of hydrogen in arenes or heteroarenes by a perfluoroalkyl group has a profound influence on the physical and biological properties of such building blocks. Here, an operationally simple protocol for the direct C? H perfluoroalkylation of (hetero)arenes with R_fI or R_fBr has been developed, using a robust supported platinum catalyst. The ready availability of the starting materials, the excellent substrate tolerance, and the reusability of the catalyst make this method attractive for the synthesis of a variety of perfluoroalkyl‐substituted aromatic compounds. Preliminary mechanistic studies revealed the formation of radicals to be crucial in the reaction system.     

Heterogeneous Platinum‐Catalyzed C?H Perfluoroalkylation of Arenes and Heteroarenes

Fluorinated organic compounds are gaining increasing interest for life science applications. The replacement of hydrogen in arenes or heteroarenes by a perfluoroalkyl group has a profound influence on the physical and biological properties of such building blocks. Here, an operationally simple protocol for the direct C H perfluoroalkylation of (hetero)arenes with R_fI or R_fBr has been developed, using a robust supported platinum catalyst. The ready availability of the starting materials, the excellent substrate tolerance, and the reusability of the catalyst make this method attractive for the synthesis of a variety of perfluoroalkyl‐substituted aromatic compounds. Preliminary mechanistic studies revealed the formation of radicals to be crucial in the reaction system.     

Photoinduced swing of a diarylethene thin broad sword shaped crystal: a study on the detailed mechanism

We report a swinging motion of photochromic thin broad sword shaped crystals upon continuous irradiation with UV light. By contrast in thick crystals, photosalient phenomena were observed. The bending and swinging mechanisms are in fact due to molecular size changes as well as phase transitions. The first slight bending away from the light source is due to photocyclization-induced surface expansion, and the second dramatic bending toward UV incidence is due to single-crystal-to-single-crystal (SCSC) phase transition from the original phase I to phase II_UV. Upon visible light irradiation, the crystal returned to phase I. A similar SCSC phase transition with a similar volume decrease occurred by lowering the temperature (phase III_temp). For both photoinduced and thermal SCSC phase transitions, the symmetry of the unit cell is lowered; in phase II_UV the twisting angle of disordered phenyl groups is different between two adjacent molecules, while in phase III_temp, the population of the phenyl rotamer is different between adjacent molecules. In the case of phase II_UV, we found thickness dependent photosalient phenomena. The thin broad sword shaped crystals with a 3 μm thickness showed no photosalient phenomena, whereas photoinduced SCSC phase transition occurred. In contrast, large crystals of several tens of μm thickness showed photosalient phenomena on the irradiated surface where SCSC phase transition occurred. The results indicated that the accumulated strain, between isomerized and non-isomerized layers, gave rise to the photosalient phenomenon.

We report a swinging motion of photochromic thin broad sword shaped crystals upon continuous irradiation with UV light.     

Exploiting catalytic dehydrogenative coupling in the synthesis and study of polysilanes

A reinvestigation of the catalytic activity of Wilkinson's catalyst, (Ph₃P)₃RhCl ( 1 ), for the dehydrogenative coupling reactions of secondary silanes has pointed the way toward the synthesis of key oligosilane reagents for structure property correlation studies of polysilanes. Implications are discussed for understanding the mechanisms of coupling and redistribution reactions of silanes mediated by such late metal centres. Also described are attempts to derivatize Si-H bonds in the resulting oligosilanes, which is highly relevant to the development of improved methods for the post-polymerization functionalization of polysilanes containing Si-H bonds.     

Silicon-Modified Carbohydrate Surfactants V: The Wetting Behaviour of Low-Molecular-Weight Siloxane,Carbosilane, Silane and Polysilane Precursors on Low-Energy Surfaces

The surface tensions, wetting tensions, contact angles and solid/liquid interfacial tensions of defined siloxanes as well as those of analogous carbosilanes, polysilanes and neopentyl substituted silanes were determined. The wetting experiments were carried out on a glass plate coated with perfluoroalkyl methacrylate (FC 722^®). The siloxanes possess the lowest surface tensions. Due to the presence of oxygen atoms in the siloxane backbone, a donor–acceptor portion (γ^+/−_lv) of the surface tension of about 1–2 mN/m was determined. The solid/liquid interfacial tension also contains a donor–acceptor portion (γ^+/−_sl). Its value is almost identical to that of γ^+/−_lv. The γ^+/−_sl differences between individual molecules of the same surface tension are responsible for contact angle differences of up to 4°. © 1997 John Wiley & Sons, Ltd.     

Studies on fluoroalkylation and fluoroalkoxylation: 2. Perfluoroalkylation of aromatics with perfluoroalkyl iodides in the presence of copper

Perfluoroalkyl iodide R_fI [R_f = (CF₂)_nO(CF₂)₂SO₂F, n = 2, (a); n = 4, (b); (CF₂)₄Cl, (c)] reacted with substituted benzene C₆H₅Y (Y = alkyl, OCH₃, CF₃, F, Cl, Br, I) in the presence of copper in acetic anhydride to give the corresponding mixture of isomeric disubstituted benzene (R_fC₆H₄Y). The conversion and yield depend on both the amount of copper used and nature of substituent. The likely explanation is that the reaction may involve a free radical process. The perfluoroalkyl radical can be trapped by cyclohexene, isopropylbenzene and styrene. Using DMSO in place of acetic anhydride as a solvent the reaction takes a different course, it is believed that the reaction in DMSO proceeds through a perfluoroalkylcopper intermediate.     

Cobalt-doped BiVO<Subscript>4</Subscript> (Co-BiVO<Subscript>4</Subscript>) as a visible-light-driven photocatalyst for the degradation of malachite green and inactivation of harmful microorganisms in wastewater

Co-doped BiVO₄, a visible-light-responsive photocatalytic semiconductor, was synthesized using a microwave hydrothermal method. The doped sample exhibited much higher photocatalytic activity for malachite green degradation under visible light irradiation than undoped BiVO₄. Similarly, improved inactivation efficiency toward Escherichia coli and Chlamydomonas pulsatilla (green tide) were observed with Co-doped BiVO₄. The degradation of malachite green by Co-doped BiVO₄ reaches 99% within 90 min irradiation to visible light. Similarly, the inactivation of Escherichia coli reaches 81.3% in 5 h and Chlamydomonas pulsatilla reaches 65.6% in 1 h irradiation to visible light. The enhanced photoactivity is believed to be due to the increment of the visible light absorption range by narrowing the band gap energy. In addition, the highly exposed reactive (010) facets can efficiently capture the photoinduced electrons, promote charge separation, and reduce recombination probability. Thus, these findings provide mechanistic insight into the effectiveness of Co-doped BiVO₄ semiconductors for the treatment of wastewater that contains industrial effluents and microorganisms.     

Synthesis and Characterization of Novel Poly(Arylene Ether)s from 4,4′‐Thiodiphenol

Four novel perfluoroalkylated poly(arylene ether)s have been synthesized successfully using four perfluoroalkyl‐activated bisfluoro monomers. These polymers are synthesized through nucleophilic displacement of the fluorine atoms on the benzene ring with 4,4′‐thiodiphenol and are named as 1a, 1b, 1c and 1d, respectively. The polymers obtained by displacement of the fluorine atoms exhibit weight‐average molar masses up to 3.9×10⁴ g · mol^?1 in Gel permeation chromatography. These poly(arylene ether)s showed very high thermal stability up to 548°C for 10% weight loss in TGA under nitrogen and high glass transition temperature (T_g) up to 178°C in DSC depending on the repeat unit structures. The glass transition temperatures taken as peak in tan δ in DMA measurements are in good agreement with the DSC T_g values. All the polymers synthesized are soluble in a wide range of organic solvent such as CHCl₃, CHCl₂, THF, NMP, DMF and toluene. Transparent thin films of these polymers cast from THF exhibited tensile strengths up to 72 MPa, modulus up to 1.69 GPa with low elongation at break depending on their exact repeating unit structures. Rheological properties showed ease of processability of these polymers with no change in melt viscosity with temperature.     

A One‐Pot Synthesis of 1,3‐Dihydro‐1,3,3‐tris(perfluoroalkyl)isobenzofuran‐1‐olates and Their Complete NMR Spectroscopic Analysis on the Basis of 1D and 2D Experiments

A convenient synthesis of the 1,3‐dihydro‐1,3,3‐tris(perfluoroalkyl)isobenzofuran‐1‐ols 3a , b was elaborated starting from commercially available phthaloyl dichloride and trimethyl(perfluoroalkyl)silanes (Me₃SiR_f) 1a , b (R_f=CF₃, C₂F₅) in the presence of a fluoride source (Schemes 1 and 3). In a reaction analogous to alkyl Grignard reagents, double chloride substitution by two perfluoroalkyl groups and subsequent addition of one perfluoroalkyl group with concomitant ring closure led to this new class of compounds (Scheme 2). The syntheses of the alcohols and some alcoholates, as well as of the corresponding trimethylsilyl ethers are described. A combination of special 1D and 2D NMR experiments allowed the assignment of all atoms of the new compounds. The solid‐state structure of 1,3‐dihydro‐1,3,3‐tris(trifluoromethyl)isobenzofuran‐1‐ol ( 3a ) was elucidated by X‐ray diffraction methods.