CeO<Subscript>2</Subscript>-catalyzed ozonation of phenol

Three different cerium citrate-based precursors were used for synthesizing CeO₂ through thermal treatment. Three morphological types of CeO₂ were obtained. Characterization of these oxides was carried out by XRD patterns, SEM microscopy, N₂ adsorption isotherms, Raman spectroscopy, zeta potential, and UV/Vis luminescence. Ozonation of phenol catalyzed by CeO₂ was studied as a representative reaction of environmental interest. The differences on the catalytic activity showed by these three oxides could be correlated to amounts of Ce³⁺ on CeO₂ surface and, consequently, to the demand for oxygen needed to burn each precursor.     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

High Carbon-Resistance Ni@CeO<Subscript>2</Subscript> Core–Shell Catalysts for Dry Reforming of Methane

Ni@CeO₂ core–shell catalysts were synthesized via a facile surfactant-assisted hydrothermal method and their catalytic performance in the dry reforming of methane (DRM) reaction was evaluated. A variety of techniques including XRD, N₂ adsorption–desorption, SEM, TEM, TPO, TGA were employed to characterize the prepared or spent catalysts. The encapsulation by the CeO₂ shell, on one side, can restrict the sintering and growth of Ni nanoparticles under harsh reaction conditions. On the other side, compared to the conventional shell material of SiO₂, CeO₂ can provide more lattice oxygens and vacancies, which is helpful to suppress coke deposition. Consequently, the Ni@CeO₂ core–shell catalysts exhibited better catalytic activity and stability in the DRM reaction with respect to the referenced Ni@SiO₂ core–shell catalysts and Ni/CeO₂ supported catalysts.     

Luminescent characteristics and microstructures of Sr<Subscript>2</Subscript>CeO<Subscript>4</Subscript> phosphors prepared via sol–gel and solid-state reaction routes

Blue-light-emitting Sr₂CeO₄ phosphors were synthesized via a sol–gel process and the conventional solid-state method in this study. The developed sol–gel process lowered the synthesis temperature of monophasic Sr₂CeO₄ to as low as 900 °C. In comparison with the solid-state derived powders, the sol–gel derived powders had more uniform morphology and smaller particle sizes. In addition, sol–gel derived Sr₂CeO₄ displayed higher luminescent intensity than that prepared via the solid-state route under the same heating conditions. This is attributed to the improved compositional homogeneity and crystallinity in the sol–gel process. During the heating processes, Sr₂CeO₄ tended to thermally decompose at elevated temperatures. This decomposition reaction resulted in the formation of an impurity phase- SrCeO₃ and thereby a decrease in the luminescent intensity. For obtaining Sr₂CeO₄ phosphors with high luminescent intensity, the heating conditions in both processes need to be well modulated.     

Au/CeO2中强金属-载体相互作用的形貌效应

以Au/CeO₂为研究对象,通过构建不同形貌的CeO₂载体来研究强金属-载体相互作用（SMSI）的形貌效应。分别以纳米立方块和纳米棒作为载体,通过高分辨（扫描）透射电子显微、光电子能谱、氢程序升温还原等一系列表征方法揭示了CeO₂纳米立方块表面更易发生质量传输并形成CeO_2-x包覆层。此包覆层大幅抑制了催化剂对小分子气体的吸附能力,并减少了催化活性位点的暴露,对探针反应（丁二烯选择性催化加氢）的催化活性影响显著。以上研究结果表明CeO₂纳米立方块比CeO₂纳米棒更易构建SMSI体系。     

Three-dimensional hierarchical CeO<Subscript>2</Subscript> nanowalls/TiO<Subscript>2</Subscript> nanofibers heterostructure and its high photocatalytic performance

Combining the versatility of electrospinning technique and hydrothermal growth of nanostructures enabled the fabrication of hierarchical CeO₂/TiO₂ nanofibrous mat. The as-prepared hierarchical heterostructure consisted of CeO₂ nanowalls growing on the primary TiO₂ nanofibers. Interestingly, not only were secondary CeO₂ nanowalls successfully grown on TiO₂ nanofibers substrates, but also the CeO₂ nanowalls were uniformly distributed without aggregation on TiO₂ nanofibers. The photocatalytic studies suggested that the CeO₂/TiO₂ heterostructures showed enhanced photocatalytic efficiency compared with bare TiO₂ nanofibers under UV light irradiation.     

Temperature-programmed reduction of lightly yttrium-doped Au/CeO<Subscript>2</Subscript> catalysts

The reducibility of Au catalysts on CeO₂ supports doped with 1 and 2.5 mass% Y₂O₃ by two types of preparation methods (impregnation and co-precipitation) has been studied by temperature-programmed reduction and compared with that of pure Au/CeO₂. The kinetic parameters of reduction were determined simulating each reduction process. The capacities of these catalysts to retain oxygen have been evaluated by temperature-programmed desorption. The catalytic activities in water gas shift reaction were determined measuring CO conversion between 413 and 623 K. The catalytic performances of all these catalysts were explained in terms of mobility of the oxygen ions of the CeO₂ lattice.     

Effect of cerium dioxide on the properties of monolithic CuO-ZnO-CeO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts in methanol decomposition

Cerium dioxide as a component of CuO-ZnO-CeO₂/Al₂O₃/cordierite catalysts stabilizes their action in the decomposition of methanol by preventing carbon deposition on the surface and facilitating hydrogen formation with selectivity and yield in the range 85–96%. The optimal indices for this reaction are obtained for a CeO₂-CuO/Al₂O₃/cordierite sample prepared using an ammonium precursor for cerium, (NH₄)₂Ce(NO₃)₆. This catalyst displays enhanced reductive capacity relative to the analogous CeO₂-CuO composition prepared using Ce(NO₃)₃·6H₂O.     

Effects of peak current density on the structure and property of PbO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> nanocomposite electrodes prepared by pulse electrodeposition

PbO₂–CeO₂ nanocomposite electrodes were prepared by pulse electrodeposition method in the lead nitrate solution containing CeO₂ nanoparticles with different peak current density. The content of CeO₂ nanoparticles in the electrodes increase with the increase of peak current density. The effects of peak current density on the morphology and structure of PbO₂–CeO₂ nanocomposite electrodes were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The SEM and XRD results show that the increase of peak current density can make the morphology finer and more compact, and the crystal size decreases with the increase of peak current density. The oxygen evolution overpotential and stability of PbO₂–CeO₂ nanocomposite electrodes enhance with the increase of peak current density. The electrocatalytic property of PbO₂–CeO₂ nanocomposite electrodes was examined for the electrochemical oxidation of rhodamine B (RhB). The results show that the RhB removal efficiency on PbO₂–CeO₂ nanocomposite electrodes increase with the increase of peak current density, which can be attributed to the higher oxygen evolution overpotential and CeO₂ content in the composite electrodes.     

Effect of CeO<Subscript>2</Subscript> and Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> on the phase transformation and optical properties of photostable titanium dioxide

In the present work, the effect of individual additives calculated as molar fractions of Sb₂O₃ and CeO₂ (x _{Sb 2}O₃ range: 0.03–0.08 %, x _{CeO 2} range: 0.05–0.14 %), on the phase composition, phase transformation, and optical properties of photostable rutile titanium dioxide was studied using selective leaching method, ICP-AES technique, XRD method, spectrophotometric analysis and S _BET measurements. The starting material was hydrated titanium dioxide. It was observed that the addition of Sb₂O₃ to TiO₂ did not influence the anatase-rutile phase transformation, but increasing the CeO₂ addition caused a decrease in the rutilization degree. Thus, CeO₂ acted as an inhibitor of the TiO₂ phase transformation. Sb₂O₃ addition to TiO₂ presumably caused the formation of a co-phase of Sb with Ti. Cerium formed a separate phase, CeO₂, and reacted partly with titanium, probably creating co-phase, Ce_0.8Ti_0.2O₂. Comparing the colour of modified rutile titanium dioxide according to the type of the additive introduced, it was found that TiO₂ with CeO₂ had higher brightness but lower white tone values when compared with TiO₂ modified with Sb₂O₃. The relative lightening power and grey tone of the modified TiO₂ were higher in TiO₂ modified with Sb₂O₃. The values of the photocatalytic activity measured in all TiO₂ samples modified either with Sb₂O₃ or CeO₂ were very similar and varied around the value of 21.     

Development of CeO<Subscript>2</Subscript>- and TiO<Subscript>2</Subscript>-incorporated aluminium metal-composite matrix with high resistance to corrosion and biofouling

Cerium oxide (CeO₂) is a potential corrosion inhibitor for aluminium, and titanium oxide (TiO₂) is an efficient anti-fouling agent in the marine environment. The present study explored the possibility of incorporating CeO₂ and TiO₂ in aluminium to prepare a metal matrix composite that could have high corrosion and biofouling resistance under marine conditions. Such incorporation of CeO₂ and TiO₂ in pure aluminium offered high resistance to corrosion and biogrowth under marine conditions as evidenced during different tests. The specimens exhibited more anodic and stable open circuit potential throughout the period of the study. The optimum concentration of CeO₂ and TiO₂ was found to be 0.2 and 0.1%, respectively. The present results lay emphasis on the potential scope of the use of CeO₂- and TiO₂-incorporated aluminium in marine environments.     

Colloidal properties of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols

CeO₂-ZrO₂ hydrosols are synthesized and the size, shape, phase composition, density, and electrophoretic mobility of particles are studied. The pH ranges of the stability of hydrosols and the thresholds of their fast coagulation in the presence of some electrolytes are determined. The nature of the aggregation stability of CeO₂-ZrO₂ hydrosols is discussed.     

Effects of duty cycle on the preparation and property of PbO<Subscript>2</Subscript>-CeO<Subscript>2</Subscript> nanocomposite electrodes

PbO₂-CeO₂ nanocomposite electrodes were prepared by pulse electrodeposition in the lead nitrate solution containing CeO₂ nanoparticles with different duty cycles. The effects of duty cycle on the morphology and phase structure were investigated by scanning electronic microscopy (SEM) and X-ray diffraction (XRD), respectively. The SEM and XRD results show that the decrease of duty cycle can reduce the grain size of PbO₂-CeO₂ nanocomposite electrodes and make the electrodes more compact. The CeO₂ content in composite electrodes increases with the decrease of duty cycle. The steady-state polarization curves and accelerated life tests demonstrate that the oxygen evolution overpotential and service life of PbO₂-CeO₂ nanocomposite electrodes increase with the decrease of duty cycle. The service life of PbO₂-CeO₂ nanocomposite electrodes prepared with 25 % duty cycle reaches 218 h which is 1.8 times longer than that of PbO₂-CeO₂ nanocomposite electrodes prepared by direct electrodeposition. The bulk electrolysis shows that the degradation of malachite green (MG) on the PbO₂-CeO₂ nanocomposite electrodes is the pseudo-first-order reaction and the MG and chemical oxygen demand (COD) removal efficiency on PbO₂-CeO₂ nanocomposite electrodes increases with the decrease of duty cycle, which can be attributed to the higher oxygen evolution overpotentials, electrochemical active surface area, and CeO₂ content in the composite electrodes.     

Thermal stability of several polyaniline/rare earth oxide composites (I): polyaniline/CeO<Subscript>2</Subscript> composites

Polyaniline (PANI)/CeO₂ composites were prepared by adding CeO₂ powder into the polymerization reaction mixture of aniline. Fourier transform infrared spectra (FTIR) and X-ray diffraction (XRD) were used to characterize the composites. Thermogravimetry (TG) and derivative thermogravimetry (DTG) were used to study the thermal stability of the composites. IR and XRD results show that interaction exists between PANI and CeO₂. This interaction maybe is hydrogen bonding action between the hydroxyl groups on the surface of the CeO₂ and the imine groups in the PANI molecular chains. TG–DTG analysis indicates that the thermal stability of the composites is higher than that of the pure PANI. The improvement in the thermal stability of the composites is attributed to the interaction between PANI and CeO₂, which restricts the thermal motion of PANI chains and shields the degradation of PANI in the composites.     

Use of the differential charging effect in XPS to determine the nature of surface compounds resulting from the interaction of a Pt/(BaCO<Subscript>3</Subscript> + CeO<Subscript>2</Subscript>) model catalyst with SO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Changes in the chemical composition of the surface of a Pt/(BaCO₃ + CeO₂) model NO _x storage-reduction catalyst upon its interaction with SO _x (SO₂ (260 Pa) + O₂ (2600 Pa) + H₂O (525 Pa)) followed by regeneration in a mixture of CO (2100 Pa) with H₂O (525 Pa) were studied by X-ray photoelectron spectroscopy (XPS). Model catalyst samples were prepared as a thin film (about several hundreds of angstrom units in thickness) on the surface of tantalum foil coated with a layer of aluminum oxide (～100 Å). It was found that the Pt/BaCO₃ and Pt/CeO₂ catalyst constituents acquired different surface charges (differential charging) in the course of photoelectron emission; because of this, it was possible to determine the nature of surface compounds formed as a result of the interaction of the catalyst with a reaction atmosphere. It was found that barium carbonate was converted into barium sulfate as a result of reaction with SO _x on the surface of BaCO₃ at 150°C. As the treatment temperature in SO _x was increased to 300°C, the formation of sulfate on the surface of CeO₂ was observed. The sulfatization of CeO₂ was accompanied by the reduction of Ce(IV) to Ce(III). The regeneration reaction of the catalyst treated in SO _x at 300°C resulted in the consecutive decomposition of cerium(III) sulfate at ≤500°C and then barium sulfate at 600–700°C. Upon the decomposition of BaSO₄, a portion of sulfur was converted into a sulfide state, probably, because of the formation of BaS.     

Synthesis of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols via peptization at room temperature

A procedure is developed for the synthesis of concentrated CeO₂-ZrO₂ hydrosols based on the peptization of a precipitate obtained by the hydrolysis of a cerium nitrate-zirconium oxynitrate mixture. The time intervals and optimum [H⁺]/[Me ⁿ⁺] molar ratios giving rise the formation of CeO₂-ZrO₂ hydrosols stable to aggregation with a narrow particle size distribution are established. The size, shape, density, and phase composition of the hydrosol particles are determined.     

Synthesis and antibacterial activity of Ag/CeO<Subscript>2</Subscript> hybrid architectures

Flower-like ceria (CeO₂) architectures consisting of well aligned nanosheets were first synthesized by a glycol solvothermal method. The size of CeO₂ architectures is about 5?μm in width and 10?μm in length, with the nanosheets thickness below 100?nm. Subsequently, the adsorbed Ag ions on the surface of CeO₂ were in situ reduced to form Ag nanoparticles (NPs), leading to the fabrication of Ag/CeO₂ hybrid architectures (HAs). The formed Ag NPs with sizes of 20–40?nm were uniformly loaded on the surface of the CeO₂ sheets. The antibacterial properties of Ag/CeO₂ HAs against Gram-negative E. coli and Gram-positive S. aureus were evaluated by minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and a filter paper inhibition zone method. The results demonstrated that Ag/CeO₂ HAs displayed excellent antibacterial activity toward S. aureus and E. coli, which were attributed to the synergistic antibacterial effect between Ag NPs and CeO₂ in HAs_. Here, CeO₂ nanoflowers as a new substrate could restrict Ag NPs aggregations and improve their antibacterial activities. Therefore, the resulted Ag/CeO₂ HAs would be considered as a promising antibacterial agent.

Open image in new window

     

Fabrication of Cu-Doped CeO<Subscript>2</Subscript> Catalysts with Different Dimension Pore Structures for CO Catalytic Oxidation

Transition metal oxides (TMOs) applied as catalysts whose catalytic activities are directly affected by their pores size and pores distributions. Herein, two-dimensional Cu-doped CeO₂ (2D@Cu–CeO₂) and three-dimensional Cu-doped CeO₂ (3D@Cu–CeO₂) were prepared by adopting the mesoporous silica SBA-15 and KIT-6 as templates, respectively. Nanometer Cu-doped CeO₂ (nano@Cu–CeO₂) was synthesized by the method of precipitation. All catalysts were evaluated for the catalytic oxidation of CO, and the 3D@Cu–CeO₂ catalyst exhibited the highest catalytic activity (complete conversion temperature T₁₀₀?=?50?°C), which can be ascribed to the three-dimensional porous channel structure, larger specific surface area and abundant active surface oxygen species. In addition, complete conversion of CO had remained the same after 3D@Cu–CeO₂ was observed for 12 h, indicating it has the best catalytic stability for CO.     

CO oxidation over Au/CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> catalists: The effect of the support composition of the au-support interaction

The effect of the support composition on the Au-support interactions and its role in the creation of the activity of Au/CeO₂-ZrO₂ catalysts in CO oxidation has been studied. The CeO₂-ZrO₂ oxides and Au/CeO₂-ZrO₂ catalysts were synthesized, characterized by BET, XRD, HRTEM, AAS, TPR-H₂, and tested in CO oxidation. An approximate evaluation of the H₂ consumption for the surface reduction of the studied samples was estimated applying the model developed by Johnson and Mooi, which is based on the qualitative relationship between the amount of the capping oxygen and BET surface area. The sequence of the increasing percentage of O₂ atoms in the capping peak to the total Ce atoms follows the sequence of the decreasing Zr/Ce molar ratio in the sample. The activity of Au/CeO₂-ZrO₂ catalysts depends on the support composition and increases with the decrease in Zr/Ce molar ratio.     

Thermal stability and surface structure of Mo/CeO<Subscript>2</Subscript> and Ce-doped Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

In order to explore the influence of CeO₂ on the structure and surface characteristics of molybdena, an investigation was undertaken by using N₂ adsorption (BET method), thermal analysis and in-situ diffuse reflectance infrared (DRIFT) techniques. In this work, the Mo/CeO₂ and Ce-Mo/Al₂O₃ samples were prepared by impregnation and co-precipitation methods with high Mo loadings. Combining the results one may notice that the presence of ceria led to the increase of polymerized surface Mo species so as to forming Mo-O-Ce linkages besides the formation of coupled O=Mo=O bonds indicative of polymeric MoO₃. From thermal analysis, it can be inferred that Mo/Al₂O₃ is the thermally most stable material in the temperature range used in the experiment (up to 900°C), whereas Ce-Mo/Al₂O₃ and Mo/CeO₂ samples undergo morphological modifications above 700°C resulting in lattice defects, which motivate the mobility of Mo and Ce ions and thus enhance the possibility of interaction between them. Additionally, their activity towards CO adsorption needs reduced ceria and molybdena containing coordinatively unsaturated sites (CUS), oxygen vacancies and hydroxyl groups to form various carbonate species.