Degradation behaviors of star-shaped poly(ethylene glycol)-poly(?-caprolactone) nanoparticles in aqueous solution

Star-shaped poly(ethylene glycol) (PEG)-poly(?-caprolactone) (?-PCL) block copolymers were synthesized via a ring-opening polymerization. Nanoparticles prepared by the precipitation/solvent evaporation technique exhibit a core-shell structure. The hydrolytic degradation of 3-arm PEG-PCL copolymeric nanoparticles was studied by dynamic light scattering (DLS), nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). It was found that copolymers with shorter PCL block length degraded faster. The sizes of nanoparticles fluctuated during the initial degradation period, and then increased slightly before finally dropping off. The degradation mainly occurred at CL-CL linkages firstly then at the EO-CL linkages. The CL/EO molar ratios and the molecular weights of copolymers decreased as degradation time and a zero-order degradation behavior was observed.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Applications of particle-tracking analysis to the determination of size distributions and concentrations of nanoparticles in environmental, biological and food samples

The manufacture of nanoparticles (NPs) and nanomaterial-based products is rapidly increasing and their possible occurrence in environment, food or biological tissue is becoming of concern for ecological and human health. However, there is a lack of suitable methods to analyze and to characterize NPs in low concentrations in complex matrixes. We compare several particle-tracking methods using video microscopy and a new technique called nanoparticle-tracking analysis (NTA). Video microscopy has been widely applied to investigate particle movement in biological samples, micro-rheology, and velocity profiles in fluids, whilst NTA was devised for determination of size distributions and concentrations in liquid samples. We critically discuss the advantages and the limitations of NTA for such applications.     

Magnetic nanocomposites based on cyclodextrin-containing molecular tubes and iron nanoparticles

Stabilization of metallic nanoparticles may be achieved by the formation of their adducts with polymers and/or nanotubes of various chemical composition. Here, water-soluble nanotubes based on β-cyclodextrin (β-tubes) were used for entrapping of Fe nanoparticles obtained by the reduction of iron-containing precursors ([Fe₃(CO)₁₁H][Et₄N] cluster and FeSO₄). Using methods of light-scattering, viscometry, and isothermal diffusion measurements, it was shown that the adducts are associated in aqueous solutions. The presence of iron nanoparticles and the shape and size of adducts were verified by transmission electron microscopy. The adducts are long (up to 600 nm and longer), translucent associates consisting of denser walls and transparent cores. The width of nanotubes is ∼150 nm and the thickness of the wall 3–25 nm. Their magnetic properties were demonstrated by electron paramagnetic resonance method. The mechanism of self-assembly of the adducts is discussed.     

Kinetic study of the formation reaction of colloidal silica spheres by transmitted-light-intensity and dynamic light-scattering measurements

Kinetic analyses of the formation reaction of colloidal silica spheres which are synthesized from ethyl silicate (EtSi), ammonia and a trace of water in ethanol are made by the transmitted-light-intensity and dynamic light-scattering methods. Sphere size versus time profiles from the two methods agree well especially at the beginning of the reaction. The polymerization starts after a certain induction time (t _i) ranging from several tens of seconds to several minutes. t _i increases as the concentrations of NH₃, EtSi and/or H₂O decrease. The apparent rates of the reaction, v ^′ are estimated from the reciprocal periods between the intersections of the linear line with the initial and final horizontal lines in the cube root of the absorbance versus time plots. Log v ^′ increases linearly with slopes of 1, 2 and 0.5 as the logarithms of the concentrations of EtSi, NH₃ and/or H₂O increase, respectively. These results are consistent with the assumption proposed earlier that the polymerization mechanism of the formation of the small preliminary particles is followed by their coalescence to form large silica spheres. Received: 10 November 1998 Accepted in revised form: 12 January 1999     

Synthesis and catalytic properties of microemulsion-derived cerium oxide nanoparticles

The synthesis of cerium dioxide nanoparticles using an inverse microemulsion technique and precipitation method was investigated. Cerium hydroxide nanoparticles were synthesized by adding diluted ammonia to n-heptane–surfactant–cerium nitrate system. The micelle and particle size in the range of 5–12 nm were controlled by varying the molar water to surfactant ratio and analyzed by dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and high-resolution transmission electron microscopy (HRTEM). Cerium hydroxide nanoparticles were isolated and subsequently treated at 100–600 °C to obtain nanoscale ceria. Crystallite sizes of cerium dioxide in the range of 6–16 nm were estimated by Scherrer analysis by X-ray diffraction (XRD) and HRTEM. The catalytic activity of particles annealed at 400 and 600 °C in soot combustion reactions was characterized by temperature-programmed oxidation (TPO) indicating a size-dependant activity. Crystallite sizes and catalytic stability of elevated ceria systems were tested in second combustion cycles.     

Influence of surfactant and lipid chain length on the solubilisation of phosphatidylcholine vesicles by micelles comprised of polyoxyethylene sorbitan monoesters

Photon correlation spectroscopy and freeze-fracture electron microscopy have been used to determine the ability of a range of micelle-forming, polyoxyethylene (20) sorbitan monoesters (Tweens) to solubilise vesicles prepared from phosphatidylcholines of different acyl chain lengths and degrees of saturation with a view to rationalising (in terms of their membrane toxicity) which of the micelle-forming surfactants to use as drug delivery vehicles. The phosphatidylcholines used were dimyristoyl-, dipalmitoyl-, distearoyl- and dioleoylphosphatidylcholine (DMPC, DPPC, DSPC and DOPC, respectively) while the nonionic polyoxyethylene sorbitan monoesters studied were polyoxyethylene (20) sorbitan monolaurate (Tween 20), a 9:1 weight ratio mixture of polyoxyethylene (20) sorbitan monopalmitate and monostearate (Tween 40), a 1:1 weight ratio mixture of polyoxyethylene (20) sorbitan monopalmitate and monostearate (Tween 60), and polyoxyethylene (20) sorbitan monooleate (Tween 80). The ability of the Tween micelles to solubilise phospholipid vesicles was found to depend both upon the length of the surfactant acyl chain and the length of the acyl chains of the phospholipid comprising the vesicle. Vesicles composed of long saturated diacyl chain phospholipids, namely DSPC and DPPC, were the most resistant to solubilisation, while those prepared from the shorter acyl chained DMPC were more readily solubilised. In terms of their solubilisation behaviour, vesicles made from phospholipids containing long, unsaturated acyl chains, namely DOPC behaved more akin to those vesicles prepared from DMPC. None of the Tween surfactants were effective at solubilising vesicles prepared from DPPC or DSPC. In contrast, there were clear differences in the ability of the various surfactants to solubilise vesicles prepared from DMPC and DOPC, in that micelles formed from Tween 20 were the most effective solubilising agent while those formed by Tween 60 were the least effective. As a consequence of these observations it was considered that Tween 60 was the surfactant least likely to cause membrane damage in vivo and, therefore, is the most suitable surfactant for use as a micellar drug delivery vehicle.     

Polyelectrolyte complexes. VI. Polycation structure,polyanion molar mass,and polyion concentration effects on complex nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate)

The formation and characterization of some interpolyelectrolyte complex (IPEC) nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate) (NaPAMPS), as a function of the polycation structure, polyanion molar mass, and polyion concentration, were followed in this work. Poly(diallyldimethylammonium chloride) and two polycations (PCs) containing (N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride) units in the backbone (PCA₅ and PCA₅D₁) were used as starting polyions. The complex stoichiometry, (n^?/n⁺)_iso, was pointed out by optical density at 500 nm (OD₅₀₀), polyelectrolyte titration, and dynamic light scattering. IPEC nanoparticle sizes were influenced by the polycation structure and polyanion molar mass only before the complex stoichiometry, which was higher for the more hydrophilic polycations (PCA₅ and PCA₅D₁) and for a higher NaPAMPS molar mass, and were almost independent of these factors after that, at a flow rate of the added polyion of about 0.28 mL × (mL PC)^?1 × h^?1. The IPEC nanoparticle sizes remained almost constant for more than 2 weeks, both before and after the complex stoichiometry, at low concentrations of polyions. NIPECs as stable colloidal dispersions with positive charges in excess were prepared at a ratio between charges (n^?/n⁺) of 0.7, and their storage colloidal stability, as a function of the polycation structure and polyion concentration (from 0.8 to ca. 7.8 mmol/L), was demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2495–2505, 2004     

Influence of particle size on the SARS-CoV-2 spike protein detection using IgG-capped gold nanoparticles and dynamic light scattering

Due to the unprecedented and ongoing nature of the coronavirus outbreak, the development of rapid immunoassays to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its highly contagious variants is an important and challenging task. Here, we report the development of polyclonal antibody-functionalized spherical gold nanoparticle biosensors as well as the influence of the nanoparticle sizes on the immunoassay response to detect the SARS-CoV-2 spike protein by dynamic light scattering. By monitoring the increment in the hydrodynamic diameter (ΔD_H) by dynamic light scattering measurements in the antigen–antibody interaction, SARS-CoV-2 S-protein can be detected in only 5 min. The larger the nanoparticles, the larger ΔD_H in the presence of spike protein. From adsorption isotherm, the calculated binding constant (K_D) was 83 nM and the estimated limit of detection was 13 ng/mL (30 pM). The biosensor was stable up to 90 days at 4 °C. Therefore, the biosensor developed in this work could be potentially applied as a fast and sensible immunoassay to detect SARS-CoV-2 infection in patient samples.     

Light scattering near and from interfaces using evanescent wave and ellipsometric light scattering

The broad range of interface light scattering investigations in recent years shows the power and the versatility of these techniques to address new and open questions in colloid and interface science and the soft condensed matter field. Structural information for polymers, liquid crystals, or colloids close to planar or spherical colloidal interfaces are either captured with long range light scattering resolution, or in a complementary approach by high resolution ellipsometric techniques. Of special interest is the dynamic behavior close to or in interfaces, since it determines material properties and responses to external fields. Due to the broad dynamical range and the high scattering contrast for visible light, interface light scattering is a key to elucidate soft matter interfacial dynamics. This contribution reviews experimental and related theoretical approaches for interface light scattering and further gives an overview of achievements based on such techniques.     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

Micro-thermal field-flow fractionation: new high-performance method for particle size distribution analysis

Micro-thermal field-flow fractionation (mu-TFFF) was applied to the separation of polystyrene latices. This new high-resolution technique allows determination of the particle size distribution (PSD) if carried out under optimized experimental conditions. The optimum temperature of the accumulation wall, which influences the relaxation processes and, consequently, the zone broadening, was chosen on the basis of our prior work. The flow rate was chosen as a compromise between the theoretical optimum value, which is very low because the diffusion coefficients of the colloidal particles are very small, and a value allowing performance of the PSD analysis in a reasonable time. These experimental conditions can be manipulated easily due to the high versatility of mu-TFFF, which follows from a large decrease of the heat energy flux across the channel with its reduced dimensions in comparison with standard TFFF. The PSDs obtained from mu-TFFF data are compared with results from quasi-elastic laser light scattering (QELS) and transmission electron microscopy (TEM). It has been found that a baseline resolution of a model mixture of two samples of close average particle diameters can be achieved by an appropriate choice of the temperature drop in mu-TFFF, whereas only a broad, unresolved PSD of the mixed sample was obtained from the QELS measurement. The TEM of the mixed sample revealed the presence of two particle size populations. However, the number of particles which are practically counted on a TEM picture is several orders of magnitude lower than the number of particles taken into account in mu-TFFF or QELS. Consequently, the PSD obtained from the TEM did not represent the whole sample. Comparison of mu-TFFF with modern hydrodynamic chromatography (HC) has shown that the methods exhibit roughly the same resolution and time of analysis. Nevertheless, mu-TFFF is a more universal technique because the separation of the colloidal particles or of the macromolecules within a broad range of molar masses is carried out on the same channel, as demonstrated previously.     

Synthesis and spectroscopic characterization of gold nanoparticles

Photoluminescent nanoparticles of gold with size 3, 4, 6, and 9nm are prepared by borohydride/citrate reduction in presence of polyethylene glycol (PEG)/tannic acid. The prepared nanomaterials are characterized by UV-vis spectroscopy and dynamic light scattering (DLS) technique. Intense photoluminescence (PL) is observed in nanoparticles prepared by fast reduction with borohydride in presence of PEG. A red shift of PL emission from 408 to 456nm is observed for the change of size from 4 to 6nm. Increase in PL intensity is observed for all the nanoparticles on the addition of KCl. Citrate reduced gold colloid which consists of large particles of size approximately 35nm with anisotropic shapes showing two plasmon peaks is also prepared. The anisotropy is confirmed by TEM measurement. SERS activity of this colloid is tested using glutamic acid as an adsorbate probe. Assignment of the observed bands is given.     

Sonoelectrochemical synthesis of spike-like gold-silver alloy nanoparticles from bulk substrates and the application on surface-enhanced Raman scattering

The synthesis of non-spherical spike-like gold-silver alloy nanoparticles on platinum substrates was first developed by sonoelectrochemical methods in this study. First, a silver substrate was roughened by a triangular-wave oxidation-reduction cycle (ORC) in an aqueous solution containing 0.1 M HCl. Silver-containing complexes were found in the solution after the ORC treatment. Then a gold substrate was subsequently roughened by the similar ORC treatment in the same silver complexes-containing solution. After this procedure, Au- and Ag-containing complexes were left in the solution. Subsequently, the Au working electrode was immediately replaced by a Pt electrode. A cathodic overpotential was applied under controlled sonication and slight stirring to synthesize Au-Ag alloy nanoparticles on the Pt substrate. Encouragingly, the surface-enhanced Raman scattering (SERS) of Rhodamine 6G on the Au-Ag alloy nanoparticles-deposited Pt substrate exhibits a higher intensity by eight-fold of magnitude and a better resolution, as compared to that obtained on the Au nanoparticles-deposited Pt substrate.     

Synthesis of newly cationic surfactant based on dimethylaminopropyl amine and their silver nanoparticles: Characterization; surface activity and biological activity

The chemical structure of newly synthesized cationic surfactants based on Schiff base was confirmed using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and mass spectroscopy. The synthesized surfactants were used in the synthesis of silver nanoparticles by a simple one-step method. The silver nanoparticle (AgNPs) formation was confirmed using transmission electron microscopy (TEM), electron diffraction (SAED), dynamic light scattering (DLS), and energy dispersive X-ray spectroscopy (EDX). The structure of the surfactant played an important role in the synthesis process. Increasing the hydrophobic chain length, the stability, and the amount of surfactant increased the quantity of AgNPs formed. The surface activity of the synthesized cationic surfactants was determined using surface tension measurements at three different temperatures. The synthesized surfactants showed a high tendency toward adsorption and micellization. Increasing the hydrophobic chain length of the synthesized surfactant increased its adsorption. Screening the synthesized cationic surfactants and their nano-form against bacteria and fungi showed that they are highly effective. The silver nanoparticles enhanced the biological activity of the synthesized cationic surfactants.     

Dynamic light scattering from bulk poly(n-hexylmethacrylate) near and above the glass transition

Photon correlation spectra of polarized scattered light from poly(n-hexylmethacrylate) PHMA (M_w = 1.6·10⁵, T_g = ?5°C) have been studied in the temperature range of ?2–25°C. The experimental time correlation functions over the time range 10^?6?10² s were represented by the Kohlrausch-Williams-Watts (KWW) function exp{?(t/τ)^β} with a virtually temperature-independent distribution parameter β = 0.27 ± 0.02. The observed relaxation functions were also analyzed in terms of a continuous distribution of retardation times L(τ) by means of a direct inverse Laplace transformation. The computed L(τ) distributions reveal a broad single peak structure in agreement with the results of the single KWW fit. The temperature dependence of τ is very similar to that of the shift factors obtained from measurements of the shear modulus and the stress relaxation modulus in the glass-rubber region. Conversely, the values of τ compare well with those extracted from the experimental dielectric loss peaks consistently represented in the time domain by the KWW function. These findings suggest that the slow density fluctuations in bulk PHMA are associated with the primary glass-rubber or α-relaxation, which, however, displays an unusual low apparent Arrhenius activation energy and a rather low β value. PHMA exhibits significant dynamic light scattering with correlation times faster than 10^?6 s near T_g. © 1992 John Wiley & Sons, Inc.     

Surface chemistry of lanthanum chromite I. Multivariate data modelling of Brunauer-Emmett-Teller surface area by the use of particle size distribution data from photon-correlation spectroscopy measurements

Particle size distributions, measured by photon-correlation spectroscopy and Brunauer- Emmett-Teller (BET) surface areas, were determined for several lanthanum chromite powders with different dopants. Principal component analysis (PCA) was used to reveal similarities among the different powders with regard to the input variables particle size, BET surface area, and calcination temperature. Correlation among the variables was also easily revealed by PCA. Partial-least-squares multivariate-response modelling was used to calibrate the BET surface area from particle size data and calcination temperatures. A model explaining 93% of the variance in the data, with good predictive power, was developed. The model revealed that the content of smallest-sized particles and the calcination temperature were important parameters in the prediction of the BET surface area. Received: 17 June 1998 Accepted in revised form: 31 August 1998     

Polyelectrolyte complex nanoparticles from chitosan and poly(acrylic acid) and Polystyrene‐block‐poly(acrylic acid)

Interpolymer polyelectrolyte complexes of chitosan (CS) with poly(acrylic acid) homopolymers and polystyrene‐block‐poly(acrylic acid) diblock copolymers were prepared and characterized. The influence of the positive/negative charge balance (charge ratio), pH, and ionic strength were thoroughly studied by dynamic light scattering. The existence of a strong polyelectrolyte effect was also highlighted in this study. Domains of stability, in which nanoparticle sizes are smaller than 100 and 200 nm for complexes of CS with the homopolymer and copolymer, respectively, were identified and confirmed by scanning electron microscopy and atomic force microscopy. The charged nature of the surface of the nanoparticles was evidenced by Zeta potential measurements. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Determination of engineered nanoparticles on textiles and in textile wastewaters

Textile materials with engineered nanoparticles (ENPs) have excellent properties as they are antibacterial, antimicrobial, water resistant and protective. The textile industry has recognized the importance and the advantages of ENPs, so they comprise one of the fastest developing branches of processing.The most important sources of ENPs released to the environment from textiles are textile-industry wastewaters and waters from large hospital or hotel laundries. In addition, waste textile materials coated with ENPs present a threat to the environment, if such materials are not properly handled and disposed of after use.Currently, the toxicity and the potential harm of ENPs widely applied on textiles are not thoroughly investigated and/or eliminated. Consequently, there is an urgent need to define the most appropriate analytical methods for monitoring ENPs on textiles.This review presents the most important techniques for monitoring ENPs on textile materials and in textile-wastewater samples, from the perspective of protecting the environment and human health.     

Purification and characterization of zinc alpha2-glycoprotein-prolactin inducible protein complex from human seminal plasma

Zinc alpha2-glycoprotein (ZAG) is present at high concentration in human seminal plasma, and considered as soluble homologue of MHC-I. ZAG is a well-known biomarker for prostate and breast carcinomas. We have purified a naturally occurring complex of ZAG with Prolactin inducible protein (PIP), which is also a well-known biomarker for the same. The ZAG-PIP complex has been isolated and purified by simple chromatographic techniques in a reproducible two-step process, using ion exchange and gel-permeation chromatography and subsequently identified by MS. The complex between ZAG and PIP is formed by non-covalent interactions. The purity and molecular mass was determined by SDS-PAGE, which shows the bands corresponding to 40 kDa and 14 kDa, which were also confirmed by MALDI-TOF. Dynamic light scattering (DLS) experiments also showed hydrodynamic radii corresponding to 54, 40 and 14 kDa for ZAG-PIP complex, ZAG and PIP respectively. The concentration dependent aggregation of this complex has also been observed. Fluorescence analysis reveals that complexes have similar binding affinities as native ZAG, for their proposed ligands like arachidonic acid, polyethylene glycol and synthetic peptide. This is the first report on purification and characterization of a naturally occurring complex of ZAG-PIP in human seminal fluid.