Optimization and comparison of ultrasound/microwave assisted extraction (UMAE) and ultrasonic assisted extraction (UAE) of lycopene from tomatoes

The extracting technology including ultrasonic and microwave assisted extraction (UMAE) and ultrasonic assisted extraction (UAE) of lycopene from tomato paste were optimized and compared. The results showed that the optimal conditions for UMAE were 98 W microwave power together with 40 KHz ultrasonic processing, the ratio of solvents to tomato paste was 10.6:1 (V/W) and the extracting time should be 367 s; as for UAE, the extracting temperature was 86.4 °C, the ratio of the solvents to tomato paste was 8.0:1 (V/W) and the extracting time should be 29.1 min, while the percentage of lycopene yield was 97.4% and 89.4% for UMAE and UAE, respectively. These results implied that UMAE was far more efficient extracting method than UAE.     

Effect of fluid properties on ultrasound assisted liquid-liquid extraction in a microchannel

When immiscible liquids are subjected to an ultrasonic field, they form emulsions. This principle has been used to improve the mass transfer characteristics of a liquid-liquid extraction process in microreactor systems. The formation of emulsion and its characteristics are prominently dependent on the properties of the liquids used and this also holds true for emulsion brought about by ultrasound. This paper focuses on the properties of fluids that are reported to have an influence on the cavitation behaviour, namely viscosity, interfacial tension and vapour pressure. These properties were examined by changing the solvent of the organic phase in the hydrolysis of p-nitrophenyl acetate. The study is performed by comparing pairs of solvents that are different in one property but similar in the other two. The pairs selected are toluene – chlorobenzene for viscosity, toluene – methyl Isobutyl ketone for interfacial tension and methyl isobutyl ketone – 2-Methyl tetrahydrofuran for vapour pressure effects. A qualitative study was performed with a high-speed camera in flow to understand the emulsification initiation mechanisms and behaviours. These findings were further explored by performing the sonicated emulsion in a batch-sonicated reactor. The quantitative analysis of the fluid properties was evaluated and compared based on the relative percentage increase in yield upon sonication with respect to their individual silent conditions. The quantitative results were further supported by the quantification of the emulsion performed with an FBRM probe. The results indicate a two times improvement in yield with solvent of lower viscosity as 2 times more droplets were formed in the emulsion. Both the solvent systems with higher interfacial tension and vapour pressure had an improved yield of 1.4 times owing to larger number of droplets formed.     

Optimization of ultrasound assisted extraction of antioxidant compounds from marjoram (Origanum majorana L.) using response surface methodology

The present study optimized the ultrasound assisted extraction (UAE) conditions to maximize the antioxidant activity [Ferric ion Reducing Antioxidant Power (FRAP)], total phenol content (TP) and content of individual polyphenols of extracts from marjoram. Optimal conditions with regard to amplitude of sonication (24.4-61.0 μm) and extraction temperature (15-35 °C) and extraction time (5-15 min) were identified using response surface methodology (RSM). The results showed that the combined treatment conditions of 61 μm, 35 °C and 15 min were optimal for maximizing TP, FRAP, rosmarinic acid, luteolin-7-O-glucoside, apigenin-7-O-glucoside, caffeic acid, carnosic acid and carnosol values of the extracts. The predicted values from the developed quadratic polynomial equation were in close agreement with the actual experimental values with low average mean deviations (E%) ranging from 0.45% to 1.55%. The extraction yields of the optimal UAE were significantly (p < 0.05) higher than solid/liquid extracts. Predicted models were highly significant (p < 0.05) for all the parameters studied with high regression coefficients (R²) ranging from 0.58 to 0.989.     

Optimization of ultrasound assisted extraction of abalone viscera protein and its effect on the iron-chelating activity

This study aims to investigate effects of ultrasound assisted extraction on the abalone viscera protein extraction rate and iron-chelating activity of peptides. The optimal conditions for ultrasound assisted extraction by response surface methodology was at sodium hydroxide concentration 14 g/kg, ultrasonic power 428 W and extraction time 52 min. Under the optimal conditions, protein extraction rate was 64.89%, compared with alkaline extraction of 55.67%. The iron-chelating activity of peptides affected by ultrasound technology was further evaluated by iron-chelating rate, FTIR spectroscopy and LC-HRMS/MS. Alcalase was the suitable enzyme for the preparation of iron-chelating peptides from two abalone viscera proteins, showing no significant difference between their iron-chelating rate of 16.24% (ultrasound assisted extraction) and 16.60% (alkaline extraction). Iron binding sites from the two hydrolysates include amino and carboxylate terminal groups and peptide bond of the peptide backbone as well as amino, imine and carboxylate from side chain groups. Moreover, 24 iron-chelating peptides were identified from hydrolysate (alcalase, ultrasound assisted extraction), which were different from the 27 iron-chelating peptides from hydrolysate (alcalase, alkaline extraction). This study suggests the application of ultrasound technology in the generation of abalone viscera-derived iron-chelating peptides which have the ability to combat iron deficiency.     

Comparison of different ultrasound assisted extraction techniques for pectin from tomato processing waste

Concept of waste to wealth is a hot topic with research ongoing globally to reduce carbon footprint. In an effort to follow up this cause present study focused on tomato industry waste specifically the peel of tomatoes for extraction of pectin. Pectin extraction was performed using five different extraction techniques (Ultrasound assisted extraction (UAE); microwave assisted extraction (MAE); ohmic heating assisted extraction (O_HAE); ultrasound assisted microwave extraction (UAME) and ultrasound assisted ohmic heating extraction (UAO_HE) at different power levels to study its extraction and degradation kinetics and in turn to optimize the extraction process. The extracted pectin yield ranged from 9.30% for O_HAE to 25.42% for MAE. Also, there was very less difference in the yield of MAE and UAME extracted pectin, but at the cost of major difference in degree of esterification 59.76 ± 0.70 and 73.33 ± 1.76%, respectively. In addition, all the pectin extracted under optimized conditions was having acceptable purity, [Galacturonic acid (GalA) content ranged from 675.8 ± 11.31 to 913.3 ± 20.50 g/kg of pectin]. FTIR analysis confirmed the presence of functional groups in the finger print region of identification for polysaccharide in all the extracted pectin. According to obtained results, UAME can be considered as better green extraction technology in terms of extraction yield as well as in quality of pectin compared to the other treatments used. Therefore, results suggest that UAME can be used as an efficient pectin extraction method from tomato processing waste.     

Ultrasound assisted aqueous two-phase extraction of polysaccharides from Cornus officinalis fruit: Modeling,optimization, purification,and characterization

Ultrasound assisted aqueous two-phase extraction of polysaccharides from Cornus officinalis fruit was modeled by response surface methodology (RSM) and artificial neural network (ANN), and optimized using genetic algorithm coupled with ANN (GA-ANN). Statistical analysis showed that the models obtained by RSM and ANN could accurately predict the Cornus officinalis polysaccharides (COPs) yield. However, ANN prediction was more accurate than RSM. The optimum extraction parameters to achieve the highest COPs yield (7.85 ± 0.09)% was obtained at the ultrasound power of 350 W, extraction temperature of 51 ℃, liquid-to-solid ratio of 17 mL/g, and extraction time of 38 min. Subsequently, the crude COPs were further purified via DEAE-52 and Sephadex G-100 chromatography to obtain a homogenous fraction (COPs-4-SG, 33.64 kDa) that contained galacturonic acid, arabinose, mannose, glucose, and galactose in a molar ratio of 34.82:14.19:6.75:13.48:12.26. The structure of COPs-4-SG was also characterized with UV–vis, fourier-transform infrared spectroscopy (FT–IR), atomic force microscopy (AFM), scanning electron microscopy (SEM), Congo-red test, and circular dichroism (CD). The findings provide a feasible way for the extraction, purification, and optimization of polysaccharides from plant resources     

超声波在金属溶剂萃取及离子交换中的应用

本文综述了超声波在金属溶剂萃取和离子交换中的最新应用研究成果，展望了声化学在该领域中的应用前景。     

Comparisons between conventional,ultrasound-assisted and microwave-assisted methods for extraction of anthraquinones from Heterophyllaea pustulata Hook f. (Rubiaceae)

This work reports a comparative study about extraction methods used to obtain anthraquinones (AQs) from stems and leaves of Heterophyllae pustulata Hook (Rubiáceae). One of the conventional procedures used to extract these metabolites from a vegetable matrix is by successive Soxhlet extractions with solvents of increasing polarity: starting with hexane to eliminate chlorophylls and fatty components, following by benzene and finally ethyl acetate. However, this technique shows a low extraction yield of total AQs, and consumes large quantities of solvent and time. Ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) have been investigated as alternative methods to extract these compounds, using the same sequence of solvents. It was found that UAE increases the extraction yield of total AQs and reduces the time and amount of solvent used. Nevertheless, the combination UAE with benzene, plus MAE with ethyl acetate at a constant power of 900 W showed the best results. A higher yield of total AQs was obtained in less time and using the same amount of solvent that UAE. The optimal conditions for this latter procedure were UAE with benzene at 50 °C during 60 min, followed by MAE at 900 W during 15 min using ethyl acetate as extraction solvent.     

Enzymolysis kinetics and structural characteristics of rice protein with energy-gathered ultrasound and ultrasound assisted alkali pretreatments

This research investigated the structural characteristics and enzymolysis kinetics of rice protein which was pretreated by energy-gathered ultrasound and ultrasound assisted alkali. The structural characteristics of rice protein before and after the pretreatment were performed with surface hydrophobicity and Fourier transform infrared (FTIR). There was an increase in the intensity of fluorescence spectrum and changes in functional groups after the pretreatment on rice protein compared with the control (without ultrasound and ultrasound assisted alkali processed), thus significantly enhancing efficiency of the enzymatic hydrolysis. A simplified kinetic equation for the enzymolysis model with the impeded reaction of enzyme was deduced to successfully describe the enzymatic hydrolysis of rice protein by different pretreatments. The initial observed rate constants (K_in,0) as well as ineffective coefficients (k_imp) were proposed and obtained based on the experimental observation. The results showed that the parameter of k_in,0 increased after ultrasound and ultrasound assisted alkali pretreatments, which proved the effects of the pretreatments on the substrate enhancing the enzymolysis process and had relation to the structure changes of the pretreatments on the substrate. Furthermore, the applicability of the simplified model was demonstrated by the enzymatic hydrolysis process for other materials.     

Intensification of extraction of curcumin from Curcuma amada using ultrasound assisted approach: Effect of different operating parameters

Curcumin, a dietary phytochemical, has been extracted from rhizomes of Curcuma amada using ultrasound assisted extraction (UAE) and the results compared with the conventional extraction approach to establish the process intensification benefits. The effect of operating parameters such as type of solvent, extraction time, extraction temperature, solid to solvent ratio, particle size and ultrasonic power on the extraction yield have been investigated in details for the approach UAE. The maximum extraction yield as 72% was obtained in 1 h under optimized conditions of 35 °C temperature, solid to solvent ratio of 1:25, particle size of 0.09 mm, ultrasonic power of 250 W and ultrasound frequency of 22 kHz with ethanol as the solvent. The obtained yield was significantly higher as compared to the batch extraction where only about 62% yield was achieved in 8 h of treatment. Peleg’s model was used to describe the kinetics of UAE and the model showed a good agreement with the experimental results. Overall, ultrasound has been established to be a green process for extraction of curcumin with benefits of reduction in time as compared to batch extraction and the operating temperature as compared to Soxhlet extraction.     

Bio-refinery of orange peels waste: A new concept based on integrated green and solvent free extraction processes using ultrasound and microwave techniques to obtain essential oil,polyphenols and pectin

In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only “in situ” water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. After extraction of essential oil, residual water of plant obtained after MHG extraction was used as solvent for polyphenols and pectin extraction from MHG residues. Polyphenols extraction was performed by ultrasound-assisted extraction (UAE) and conventional extraction (CE). Response surface methodology (RSM) using central composite designs (CCD) approach was launched to investigate the influence of process variables on the ultrasound-assisted extraction (UAE). The statistical analysis revealed that the optimized conditions of ultrasound power and temperature were 0.956 W/cm² and 59.83 °C giving a polyphenol yield of 50.02 mg GA/100 g dm. Compared with the conventional extraction (CE), the UAE gave an increase of 30% in TPC yield. Pectin was extracted by conventional and microwave assisted extraction. This technique gives a maximal yield of 24.2% for microwave power of 500 W in only 3 min whereas conventional extraction gives 18.32% in 120 min. Combination of microwave, ultrasound and the recycled “in situ” water of citrus peels allow us to obtain high added values compounds in shorter time and managed to make a closed loop using only natural resources provided by the plant which makes the whole process intensified in term of time and energy saving, cleanliness and reduced waste water.     

Extraction of polyphenols from black tea – Conventional and ultrasound assisted extraction

Products from plant raw materials gain increasing importance in food-, cosmetics and pharmaceutical industry. By way of contrast, due to lack of detailed physico-chemical fundamentals, existing production processes are economically not optimal designed. This leads to a need for deeper understanding of the processes and furthermore a systematic process and equipment design for the potentially applicable extraction techniques.Using the example of polyphenol extraction from black tea (Kenya), the conventional and ultrasound assisted extractions are investigated. Here, the state of the art as well as a comparison between the two techniques is in focus. Especially, resulting quasi-equilibria and mass transport kinetics serves as a criteria. The physico-chemical background is discussed taking particle size distributions and scanning electron microscope (SEM) measurements into account. Conclusively, process alternatives are projected and discussed. Hence, the present study makes influences of ultrasound technique on physico-chemical characteristics during extraction a subject of discussion.     

Trace determination of safranin O dye using ultrasound assisted dispersive solid-phase micro extraction: Artificial neural network-genetic algorithm and response surface methodology

In this study, ultrasound assisted dispersive solid-phase micro extraction combined with spectrophotometry (USA-DSPME-UV) method based on activated carbon modified with Fe₂O₃ nanoparticles (Fe₂O₃-NPs-AC) was developed for pre-concentration and determination of safranin O (SO). It is known that the efficiency of USA-DSPME-UV method may be affected by pH, amount of adsorbent, ultrasound time and eluent volume and the extent and magnitude of their contribution on response (in term of main and interaction part) was studied by using central composite design (CCD) and artificial neural network-genetic algorithms (ANN-GA). Accordingly by adjustment of experimental conditions suggested by ANN-GA at pH 6.5, 1.1 mg of adsorbent, 10 min ultrasound and 150 μL of eluent volume led to achievement of best operation performance like low LOD (6.3 ng mL⁻¹) and LOQ (17.5 ng mL⁻¹) in the range of 25–3500 ng mL⁻¹. In following stage, the SO content in real water and wastewater samples with recoveries between 93.27–99.41% with RSD lower than 3% was successfully determined.     

Ultrasound and microwave assisted synthesis of dihydroxyacetophenone derivatives with or without 1,2-diazine skeleton

A thorough study concerning O-alkylation and α-bromination of dihydroxyacetophenone (DA) and N-alkylation of 1,2-diazine, under ultrasound (US) and microwave (MW) irradiation as well as under conventional thermal heating (TH) is presented. Under US and MW irradiation the yields are higher, the amount of used solvent decreases substantially, the reaction time decreases considerable (from hours or days to minutes) and the consumed energy decreases, consequently the O-alkylation, α-bromination and N-alkylation methods could be considered environmentally friendly. A selective and efficient way to either bis-O-alkylation or mono-O-alkylation of DA has been found, the relative position of the two hydroxyl groups on the phenyl moiety being compulsory. A selective and efficient way for α-bromination in heterogeneous catalysis of DA derivatives under US irradiation is presented. The N-alkylation reaction of DA under US and MW irradiation proved to be the most convenient setup procedure for these types of reactions. Overall, the use of US proved to be more efficient than MW or TH.     

Synthesis of CuS thin films by microwave assisted chemical bath deposition

In this study, oriented CuS nanoplates standing perpendicularly on F: SnO₂ (FTO) coated glass substrates have been prepared through a mild microwave assisted chemical bath deposition process in which copper acetate reacted with ethylenediamine tetraacetate acid disodium and thioacetamide in aqueous solution within 40 min. The effects of reaction time and microwave radiation on the treatment process were investigated. The morphology, structure, and composition of the yielded nanostructures have been confirmed by X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDX), and scanning electron microscope (SEM). Also, the correlation between the reflectance, transmittance coefficient in the UV and the thickness of films was established. Furthermore, a two-point probe was used for resistivity measurements. We believe this simple chemical conversion technique can be further extended to the synthesis of other semiconductors with various morphologies.     

A new reactor for process intensification involving the simultaneous application of adjustable ultrasound and microwave radiation

Ultrasound (US) and Microwaves (MW) are effective methods for processes intensification. Their combined use in the same reactor can lead to remarkable results. Recently there has been a resurgence of interest in this field for new synthetic applications using reactors based upon existing technologies. We describe here a new type of apparatus in which the thermal energy is continuously removed from the system making possible the use of high power and adjustable ultrasonic and microwave densities throughout the process. The installation consists of a glass reactor located in a monomode applicator which is immersed at the same time in an ultrasonic device which can be operated at different frequencies and powers. A liquid, transparent to microwaves, was used to couple ultrasonic energy to the reactor and to remove the heat generated. Comsol software was used to get information about the distribution of ultrasonic and microwave energy between the reactor liquid and the coupling fluid. The performance was assessed using the conversion of p-nitrophenol into 4-nitrocatechol as a chemical dosimeter and a transesterification.     

Optimizing the antioxidant biocompound recovery from peach waste extraction assisted by ultrasounds or microwaves

The possibility to valorize peach juice waste, either frozen or air-dried, through microwave (MAE) and ultrasound assisted extraction (UAE) was evaluated. MAE power, UAE amplitude and time were optimized using a 2²-factorial design. For frozen waste, optimal MAE (540 W, 50 s) and UAE (23%, 120 s) processes gave extracts presenting analogous content (on 100 g dry matter) of polyphenols (309–317 mg GAE), flavonoids (94–120 mg QE), anthocyanins (8–9 mg CGE), and similar antioxidant activity (2.1–2.2 mg TE). Extracts from dried waste resulted higher in polyphenols (630–670 mg GAE) but lower in flavonoids (75–90 mg QE), anthocyanins and vitamin C (not detectable). Although developing an energy density 2-fold higher than that of UAE, MAE more efficaciously extracted vitamin C (108 mg/100 g dm) and required half extraction time (50 s). MAE would also be less impactful than UAE in terms of greenhouse gas emission and energy requirements on industrial scale. The industrial valorization of peach waste through the application of microwave or ultrasound assisted extraction requires quantitative data, able to encourage company interest and investment. This study not only identifies optimal MAE and UAE parameters to assist the extraction of peach waste bioactive compounds but also provides a preliminary estimation of the potential economic and environmental impact on an industrial scale of these technologies.     

Simultaneous ultrasound and microwave new reactor: detailed description and energetic considerations

A new reactor in which microwaves (MW), delivered by a coaxial dipole antenna, and ultrasound (US), delivered by a metallic horn, can be simultaneously used in a liquid to perform different types of processes, widely referenced in literature, is presented in detail. Calibrations of thermal energy delivered to two liquids having very different dipolar moments (i.e. water and cyclohexane) using MW and US, both separately and simultaneously, are performed by employing the traditional calorimetric method. The main results are: (i) MW and US used simultaneously increase the thermal energy delivered to the two liquids with respect to their separate use, but differently using water or cyclohexane, and (ii) the total power absorbed by polar or non polar liquids is very different, both using MW and US.     

Comparative study of ultrasonic pretreatment and ultrasound assisted three phase partitioning for extraction of custard apple seed oil

Custard apple seed oil is a marketable product extracted from custard apple seed which is a potential agriculture waste. The present work aims to elucidate simultaneous extraction of the custard apple seed oil and proteins using three phase partitioning (TPP). The efficient oil extraction was executed by optimization of parameters including time, slurry ratio, salt concentration, and slurry to t-butanol ratio. Additionally, the application of ultrasound as process intensification tool for TPP was studied that reduces the time of conventional TPP and increases the yield by 2.53%. The work also comprises a comparative study of two modes of ultrasound application, namely ultrasound pre-treatment and simultaneous ultrasound assisted TPP. This work proves ultrasonic pre-treatment followed by TPP as a superior mode of ultrasound application that attributes 33.6 ± 0.56% (w/w) oil extraction with optimized pre-treatment time of 150 s, 30 W ultrasound power and 75% duty cycle. Extraction kinetics studied for conventional, Ultrasound assisted Three Phase Partitioning (UTPP), and Ultrasound Pre-treatment assisted Three Phase Partitioning (UPTPP) were observed to fit Peleg’s model.     

Effect of oil extraction assisted by ultrasound on the physicochemical properties and fatty acid profile of pumpkin seed oil (Cucurbita pepo)

The effects of amplitude and time of ultrasound-assisted extraction on the physicochemical properties and the fatty acid profile of pumpkin seed oil (Cucurbita pepo) were evaluated. Ultrasound time (5–30 min) and the response variables amplitude (25–100%), extraction yield, efficiency, oxidative stability in terms of the free fatty acids (FFA) of the plant design comprising two independent experiments variables, peroxide (PV), p-anisidine (AV), totox value (TV) and the fatty acid profile were evaluated. The results were analyzed by multiple linear regression. The time and amplitude showed significant differences (P < 0.05) for all variables. The highest yield of extraction was achieved at 5 min and amplitude of 62.5% (62%). However, the optimal ultrasound-assisted extraction conditions were as follows: ultrasound time of 26.34 min and amplitude of 89.02%. All extracts showed low FFA (2.75–4.93% oleic acid), PV (1.67–4.68 meq/kg), AV (1.94–3.69) and TV (6.25–12.55) values. The main fatty acids in all the extracts were oleic and linoleic acid. Therefore, ultrasound-assisted oil extraction had increased performance and reduced extraction time without affecting the oil quality.