球状泡群内气泡的耦合振动

振动气泡形成辐射场影响其他气泡的运动, 故多气泡体系中气泡处于耦合振动状态. 本文在气泡群振动模型的基础上, 考虑气泡间耦合振动的影响, 得到了均匀球状泡群内振动气泡的动力学方程, 以此为基础分析了气泡的非线性声响应特征. 气泡间的耦合振动增加了系统对每个气泡的约束, 降低了气泡的自然共振频率, 增强了气泡的非线性声响应. 随着气泡数密度的增加, 振动气泡受到的抑制增强; 增加液体静压力同样可抑制泡群内气泡的振动, 且存在静压力敏感区(1–2 atm, 1 atm=1.01325×10⁵ Pa); 驱动声波对气泡振动影响很大, 随着声波频率的增加, 能够形成空化影响的气泡尺度范围变窄. 在同样的声条件、泡群尺寸以及气泡内外环境下, 初始半径小于5 μm 的气泡具有较强的声响应. 气泡耦合振动会削弱单个气泡的空化影响, 但可延长多气泡系统空化泡崩溃发生的时间间隔和增大作用范围, 整体空化效应增强.     

The cavitation induced Becquerel effect and the hot spot theory of sonoluminescence

Over 150 years ago, Becquerel discovered the ultraviolet illumination of one of a pair of identical electrodes in liquid water produced an electric current, the phenomenon called the Becquerel effect. Recently, a similar effect was observed if the water surrounding one electrode is made to cavitate by focused acoustic radiation, which by similarity is referred to as the cavitation induced Becquerel effect. The current in the cavitation induced Becquerel effect was found to be semi-logarithmic with the standard electrode potential that is consistent with the oxidation of the electrode surface by the photo-decomposition theory of photoelectrochemistry. But oxidation of the electrode surface usually requires high temperatures, say as in cavitation. Absent high bubble temperatures, cavitation may produce vacuum ultraviolet (VUV) light that excites water molecules in the electrode film to higher H(2)O(*) energy states, the excited states oxidizing the electrode surface by chemical reaction. Solutions of the Rayleigh-Plesset equation during bubble collapse that include the condensation of water vapor show any increase in temperature or pressure of the water vapor by compression heating is compensated by the condensation of vapor to the bubble wall, the bubbles collapsing almost isothermally. Hence, the cavitation induced Becquerel effect is likely caused by cavitation induced VUV light at ambient temperature.     

声场中水力空化泡的动力学特性

以水为工作介质,考虑了液体黏性、表面张力、可压缩性及湍流作用等情况,对文丘里管反应器中空化泡在声场作用下的动力学行为特性进行了数值研究.分析了超声波频率、声压及喉径比对空化泡运动特性以及空化泡崩溃时所形成泡温以及压力脉冲的影响.结果表明,超声将水力空化泡运动调制成稳态空化,有利于增强空化效果. 关键词： 超声波 水力空化 湍流 气泡动力学     

Energy partitioning in laser-induced millimeter-sized spherical cavitation up to the fourth oscillation

To investigate the energy partitioning up to the fourth oscillation of a millimeter-scale spherical cavitation bubble induced by laser, we used nanosecond laser pulses to generate highly spherical cavitation bubbles and shadowgraphs to measure the radius-time curve. Using the extended Gilmore model and considering the continuous condensation of the vapor in the bubble, the time evolution of the bubble radius, bubble wall velocity, and pressure in the bubble is calculated till the 4th oscillation. Using Kirkwood-Bethe hypothesis, the evolution of velocity and pressure of shock wave at the optical breakdown, the first and second collapses are calculated. The shock wave energy at the breakdown and bubble collapse is directly calculated by numerical method. We found the simulated radius-time curve fits well with experimental data for the first four oscillations. The energy partition at the breakdown is the same as that in previous studies, the ratio of shock wave energy to bubble energy is about 2:1. In the first collapse and the second collapse, the ratio of shock wave energy to bubble energy is 14.54:1 and 2.81:1 respectively. In the third and fourth collapses, the ratio is less, namely than 1.5:1 and 0.42:1 respectively. The formation mechanism of the shock wave at the collapse is analyzed. The breakdown shock wave is mainly driven by the expansion of the supercritical liquid resulting from the thermalization of the energy of the free electrons in the plasma, and the collapse shock wave is mainly driven by the compressed liquid around the bubble.     

激光烧蚀水下金属产生冲击波和空泡效应的研究

采用自行研制的高灵敏度光束偏转测试系统,对脉冲激光烧蚀水下金属产生的等离子体冲击波和空泡效应进行了实验研究。实验得到了激光等离子体冲击波的传播规律、冲击波与激光空泡的分离过程、空泡的脉动特性以及空泡溃灭冲击波的形成机制。结果表明,空泡最大和最小泡径、振荡周期均随着脉动次数的增加呈减小趋势,且减小幅度较大。最小收缩泡径由泡能和腔内含气量共同决定。在同一次脉动过程中,空泡膨胀所需的时间明显大于收缩所需的时间。     

导电流体中气泡径向振动行为的磁场控制

液态金属中气泡行为是磁流体力学的重要方面。为对磁场条件下导电流体中气泡动力学行为作全面理解,基于磁流体动力学方法建立了磁场条件下导电流体中气泡径向振动的无量纲化动力学方程,数值研究了磁场对导电流体中气泡径向非线性振动稳定性、泡内温度、泡内气压及液体空化阈值的影响。结果显示:磁场增强了气泡非线性振动的稳定性,随着磁场增强且当作用在泡上的电磁力与惯性力数量级可比时,气泡运动为稳定的周期性振动;同时,磁场引起泡内温度、泡内压力及液体空化阈值变化。研究表明,可用磁场调节和控制液态金属中气泡的运动使其满足工程应用需求。     

Oscillation characteristics of a laser-induced cavitation bubble in water at different temperatures

Comprehensive numerical and experimental analyses of the effect of temperature on cavitation oscillations are performed. In the experimental study, the oscillation of a laser-generated single cavitation bubble near a rigid boundary is obtained using a fiber-optic diagnostic technique based on optical beam detection (OBD). The maximum and minimum bubble radii as well as the oscillation times for each oscillation cycle are determined according to the characteristic signals. And cavitation bubble tests are performed using water at different temperatures, and its temperature ranges from freezing point (0 °C) to near boiling. Furthermore, a modified Rayleigh-Plesset equation is derived for calculating the temporal development of the bubble radius at different temperatures. Both the experimental and the numerical results show that the maximum bubble radius and bubble lifetime both increase as temperature increases. The mechanism behind it has also been discussed.     

固壁面附近激光产生空泡脉动过程的实验研究

采用自行研制的光纤传感器研究了激光等离子体空泡在固壁面附近的脉动特性。实验获得了激光空泡三次膨胀到最大位置对应的波形图;并据此判定了激光空泡在脉动过程中对应的最大泡半径和溃灭周期;在此基础上结合空泡溃灭理论,计算了激光泡溃灭周期的延长因子κ。结果表明:随着脉动次数的增加,最大泡半径依次减小;随着作用激光能量的增大,最大泡半径,空泡溃灭周期的延长因子κ均增大;而无量纲参量的增大将导致延长因子的减小。所得到的延长因子同样可用于无限域流场。     

Interaction of a bubble and a bubble cluster in an ultrasonic field

Using an appropriate approximation, we have formulated the interacting equation of multi-bubble motion for a system of a single bubble and a spherical bubble cluster. The behavior of the bubbles is observed in coupled and uncoupled states. The oscillation of bubbles inside the cluster is in a coupled state. The numerical simulation demonstrates that the secondary Bjerknes force can be influenced by the number density, initial radius, distance, driving frequency, and amplitude of ultrasound. However, if a bubble approaches a bubble cluster of the same initial radii, coupled oscillation would be induced and a repulsive force is evoked, which may be the reason why the bubble cluster can exist steadily. With the increment of the number density of the bubble cluster, a secondary Bjerknes force acting on the bubbles inside the cluster decreases due to the strong suppression of the coupled bubbles. It is shown that there may be an optimal number density for a bubble cluster which can generate an optimal cavitation effect in liquid for a stable driving ultrasound.     

Shock-wave model of acoustic cavitation

Shock-wave model of liquid cavitation due to an acoustic wave was developed, showing how the primary energy of an acoustic radiator is absorbed in the cavitation region owing to the formation of spherical shock-waves inside each gas bubble. The model is based on the concept of a hypothetical spatial wave moving through the cavitation region. It permits using the classical system of Rankine-Hugoniot equations to calculate the total energy absorbed in the cavitation region. Additionally, the model makes it possible to explain some newly discovered properties of acoustic cavitation that occur at extremely high oscillatory velocities of the radiators, at which the mode of bubble oscillation changes and the bubble behavior approaches that of an empty Rayleigh cavity. Experimental verification of the proposed model was conducted using an acoustic calorimeter with a set of barbell horns. The maximum amplitude of the oscillatory velocity of the horns' radiating surfaces was 17 m/s. Static pressure in the calorimeter was varied in the range from 1 to 5 bars. The experimental data and the results of the calculations according to the proposed model were in good agreement. Simple algebraic expressions that follow from the model can be used for engineering calculations of the energy parameters of the ultrasonic radiators used in sonochemical reactors.     

Oscillation and Migration of Bubbles within Ultrasonic Field

The oscillation and migration of bubbles within an intensive ultrasonic field are important issues concerning acoustic cavitation in liquids.We establish a selection map of bubble oscillation mode related to initial bubble radius and driving sound pressure under 20 kHz ultrasound and analyze the individual-bubble migration induced by the combined effects of pressure gradient and acoustic streaming.Our results indicate that the pressure threshold of stable and transient cavitation decreases with the increasing initial bubble radius.At the pressure antinode,the Bjerknes force dominates the bubble migration, resulting in the large bubbles gathering toward antinode center,whereas small bubbles escape from antinode.By contrast,at the pressure node,the bubble migration is primarily controlled by acoustic streaming,which effectively weakens the bubble adhesion on the container walls,thereby enhancing the cavitation effect in the whole liquid.     

The impact of methanol mass transport on its conversion for the production of hydrogen and oxygenated reactive species in sono-irradiated aqueous solution

This study aims principally to assess numerically the impact of methanol mass transport (i.e., evaporation/condensation across the acoustic bubble wall) on the thermodynamics and chemical effects (methanol conversion, hydrogen and oxygenated reactive species production) of acoustic cavitation in sono-irradiated aqueous solution. This effect was revealed at various ultrasound frequencies (from 213 to 1000 kHz) and acoustic intensities (1 and 2 W/cm²) over a range of methanol concentrations (from 0 to 100%, v/v). It was found that the impact of methanol concentration on the expansion and compression ratios, bubble temperature, CH₃OH conversion and the molar productions inside the bubble is frequency dependent (either with or without consideration of methanol mass transport), where this effect is more pronounced when the ultrasound frequency is decreased. Alternatively, the decrease in acoustic intensity decreases clearly the effect of methanol mass transport on the bubble sono-activity. When methanol mass transfer is eliminated, the decrease of the bubble temperature, CH₃OH conversion and the molar yield of the bubble with the rise of methanol concentration was found to be more amortized as the wave frequency is reduced from 1 MHz to 213 kHz, compared to the case when the mass transport of methanol is taken into account. Our findings indicate clearly the importance of incorporating the evaporation and condensation mechanisms of methanol throughout the numerical simulations of a single bubble dynamics and chemical activity.     

A study of cavitation nucleation in pure water using molecular dynamics simulation

To discover the microscopic mechanism responsible for cavitation nucleation in pure water, nucleation processes in pure water are simulated using the molecular dynamics method. Cavitation nucleation is generated by uniformly stretching the system under isothermal conditions, and the formation and development of cavitation nuclei are simulated and discussed at the molecular level. The processes of energy, pressure, and density are analyzed, and the tensile strength of the pure water and the critical volume of the bubble nuclei are investigated. The results show that critical states exist in the process of cavitation nucleation. In the critical state, the energy, density, and pressure of the system change abruptly, and a stable cavitation nucleus is produced if the energy barrier is broken and the critical volume is exceeded. System pressure and water density are the key factors in the generation of cavitation nuclei. When the critical state is surpassed, the liquid is completely ruptured, and the volume of the cavitation nucleus rapidly increases to larger than 100 nm³; at this point, the surface tension of the bubble dominates the cavitation nucleus, instead of intermolecular forces. The negative critical pressure for bubble nucleation is -198.6 MPa, the corresponding critical volume is 13.84 nm³, and the nucleation rate is 2.42×10³² m^-3·^-1 in pure water at 300 K. Temperature has a significant effect on nucleation: as the temperature rises, nucleation thresholds decrease, and cavitation nucleation occurs earlier.     

Numerical modelling of acoustic cavitation threshold in water with non-condensable bubble nuclei

Numerical modelling of acoustic cavitation threshold in water is presented taking into account non-condensable bubble nuclei, which are composed of water vapor and non-condensable air. The cavitation bubble growth and collapse dynamics are modeled by solving the Rayleigh-Plesset or Keller-Miksis equation, which is combined with the energy equations for both the bubble and liquid domains, and directly evaluating the phase-change rate from the liquid and bubble side temperature gradients. The present work focuses on elucidating acoustic cavitation in water with a wide range of cavitation thresholds (0.02–30 MPa) reported in the literature. Computations for different nucleus sizes and acoustic frequencies are performed to investigate their effects on bubble growth and cavitation threshold. The numerical predictions are observed to be comparable to the experimental data in the previous works and show that the cavitation threshold in water has a wide range depending on the bubble nucleus size.     

采用遗传算法对压力脉动过程中气泡模型参数的辨识

流动液体中的压力变化会引起气泡和气穴的产生及破灭,而气泡和气穴又会对液体的流动产生影响及压力变化.为了合理预测流控系统瞬态压力脉动过程中气泡和气穴的体积变化及其对脉动传播过程的影响,基于气泡溶解和析出的物理过程,建立了压力脉动过程中气泡和气穴产生及破灭的数学模型,并提出采用遗传算法对气泡模型中初始气泡体积、气体溶解和析出时间常数进行参数辨识.以一段液压油管路为研究对象,对管路中伴随气泡和气穴的瞬态压力脉动过程进行仿真及实验研究.利用仿真及实验结果,验证了采用遗传算法对气泡模型进行参数辨识的可行性. 关键词： 气泡 气穴 压力脉动 参数辨识     

超声场下刚性界面附近溃灭空化气泡的速度分析

为了揭示刚性界面附近气泡空化参数与微射流的相互关系, 从两气泡控制方程出发, 利用镜像原理, 建立了考虑刚性壁面作用的空化泡动力学模型. 数值对比了刚性界面与自由界面下气泡的运动特性, 并分析了气泡初始半径、气泡到固壁面的距离、声压幅值和超声频率对气泡溃灭的影响. 在此基础上, 建立了气泡溃灭速度和微射流的相互关系. 结果表明: 刚性界面对气泡振动主要起到抑制作用; 气泡溃灭的剧烈程度随气泡初始半径和超声频率的增加而降低, 随着气泡到固壁面距离的增加而增加; 声压幅值存在最优值, 固壁面附近的气泡在该最优值下气泡溃灭最为剧烈; 通过研究气泡溃灭速度和微射流的关系发现, 调节气泡溃灭速度可以达到间接控制微射流的目的.     

An alternative technique for determining the number density of acoustic cavitation bubbles in sonochemical reactors

The present paper introduces a novel semi-empirical technique for the determination of active bubbles’ number in sonicated solutions. This method links the chemistry of a single bubble to that taking place over the whole sonochemical reactor (solution). The probe compound is CCl₄, where its eliminated amount within a single bubble (though pyrolysis) is determined via a cavitation model which takes into account the non-equilibrium condensation/evaporation of water vapor and heat exchange across the bubble wall, reactions heats and liquid compressibility and viscosity, all along the bubble oscillation under the temporal perturbation of the ultrasonic wave. The CCl₄ degradation data in aqueous solution (available in literature) are used to determine the number density through dividing the degradation yield of CCl₄ to that predicted by a single bubble model (at the same experimental condition of the aqueous data). The impact of ultrasonic frequency on the number density of bubbles is shown and compared with data from the literature, where a high level of consistency is found.     

Bubble size distribution in acoustic droplet vaporization via dissolution using an ultrasound wide-beam method

Performance and efficiency of numerous cavitation enhanced applications in a wide range of areas depend on the cavitation bubble size distribution. Therefore, cavitation bubble size estimation would be beneficial for biological and industrial applications that rely on cavitation. In this study, an acoustic method using a wide beam with low pressure is proposed to acquire the time intensity curve of the dissolution process for the cavitation bubble population and then determine the bubble size distribution. Dissolution of the cavitation bubbles in saline and in phase-shift nanodroplet emulsion diluted with undegassed or degassed saline was obtained to quantify the effects of pulse duration (PD) and acoustic power (AP) or peak negative pressure (PNP) of focused ultrasound on the size distribution of induced cavitation bubbles. It was found that an increase of PD will induce large bubbles while AP had only a little effect on the mean bubble size in saline. It was also recognized that longer PD and higher PNP increases the proportions of large and small bubbles, respectively, in suspensions of phase-shift nanodroplet emulsions. Moreover, degassing of the suspension tended to bring about smaller mean bubble size than the undegassed suspension. In addition, condensation of cavitation bubble produced in diluted suspension of phase-shift nanodroplet emulsion was involved in the calculation to discuss the effect of bubble condensation in the bubble size estimation in acoustic droplet vaporization. It was shown that calculation without considering the condensation might underestimate the mean bubble size and the calculation with considering the condensation might have more influence over the size distribution of small bubbles, but less effect on that of large bubbles. Without or with considering bubble condensation, the accessible minimum bubble radius was 0.4 or 1.7 μm and the step size was 0.3 μm. This acoustic technique provides an approach to estimate the size distribution of cavitation bubble population in opaque media and might be a promising tool for applications where it is desirable to tune the ultrasound parameters to control the size distribution of cavitation bubbles.     

Bubble population phenomena in acoustic cavitation

Theoretical treatments of the dynamics of a single bubble in a pressure field have been undertaken for many decades. Although there is still scope for progress, there now exists a solid theoretical basis for the dynamics of a single bubble. This has enabled useful classifications to be established, including the distinction between stable cavitation (where a bubble pulsates for many cycles) and transient cavitation (where the bubble grows extensively over time-scales of the order of the acoustic cycle, and then undergoes an energetic collapse and subsequent rebound and then, potentially, either fragmentation, decaying oscillation or a repeat performance). Departures from sphericity, such as shape and surface oscillations and jetting, have also been characterized. However, in most practical systems involving high-energy cavitation (such as those involving sonochemical, biological and erosive effects), the bubbles do not behave as the isolated entities modelled by this single-bubble theory: the cavitational effect may be dominated by the characteristics of the entire bubble population, which may influence, and be influenced by, the sound field.

The well established concepts that have resulted from the single-bubble theory must be reinterpreted in teh light of the bubble population, an appreciation of population mechanisms being necessary to apply our understanding of single-bubble theory to many practical applications of ‘power’ ultrasound. Even at a most basic level these single-bubble theories describe the response of the bubble to the local sound field at the position of the bubble, and that pressure field will be influenced by the way sound is scattered by neighbouring bubbles. The influence of the bubble population will often go further, a non-uniform sound field creating an inhomogeneous bubble distribution. Such a distribution can scatter, channel and focus ultrasonic beams, can acoustically shield regions of the sample, and elsewhere localize the cavitational activity to discrete ‘hot spots’. As a result, portions of the sample may undergo intense sonochemical activity, degassing, erosion, etc., whilst other areas remain relatively unaffected. Techniques exist to control such situations where they are desirable, and to eliminate this localization where a more uniform treatment of the sample is desired.     

Enhancement of oscillation amplitude of cavitation bubble due to acoustic wake effect in multibubble environment

Acoustic cavitation occurs in ultrasonic treatment causing various phenomena such as chemical synthesis, chemical decomposition, and emulsification. Nonlinear oscillations of cavitation bubbles are assumed to be responsible for these phenomena, and the neighboring bubbles may interact each other. In the present study, we numerically investigated the dynamic behavior of cavitation bubbles in multi-bubble systems. The results reveal that the oscillation amplitude of a cavitation bubble surrounded by other bubbles in a multi-bubble system becomes larger compared with that in the single-bubble case. It is found that this is caused by an acoustic wake effect, which reduces the pressure near a bubble surrounded by other bubbles and increases the time delay between the bubble contraction/expansion cycles and sound pressure oscillations. A new parameter, called “cover ratio” is introduced to quantitatively evaluate the variation in the bubble oscillation amplitude, the time delay, and the maximum bubble radius.