Degradation,isomerization and stabilization of three dicaffeoylquinic acids under ultrasonic treatment at different pH

Dicaffeoylquinic acids (diCQAs) are found in a variety of edible and medicinal plants with various biological activities. An important issue is the low stability of diCQAs during extraction and food processing, resulting in the degradation and transformation. This work used 3,5-diCQA as a representative to study the influence of different parameters in ultrasonic treatment on the stability of diCQAs, including solvent, temperature, treatment time, ultrasonic power, duty cycle, and probe immersion depth. The generation of free radicals and its influence were investigated during the treatment. The stability of three diCQAs (3,5-diCQA, 4,5-diCQA and 3,4-diCQA) under the certain ultrasonic condition at different pH conditions was evaluated and found to decrease with the increase of pH, further weakened by ultrasonic treatment. Ultrasound was found to accelerate the degradation and isomerization of diCQAs. Different diCQAs showed different pattern of degradation and isomerization. The stability of diCQAs could be improved by adding epigallocatechin gallate and vitamin C.     

Ultrasonic effects on the degradation kinetics,preliminary characterization and antioxidant activities of polysaccharides from Phellinus linteus mycelia

In this study, a high-molecular-weight polysaccharide PL-N isolated from the alkaline extract of Phellinus linteus mycelia was degraded by ultrasound. Results showed that ultrasound treatment at different ultrasonic intensities decreased the intrinsic viscosity and molecular weight of PL-N, as well as narrowed the molecular weight distribution. A larger reduction in intrinsic viscosity and molecular weight was caused by a higher ultrasonic intensity. The degradation kinetics model was fitted to (1/M_t − 1/M₀) = k·t, and the reaction rate constant (k) increased with increasing ultrasonic intensity. Ultrasound degradation did not change the primary structure of PL-N, and scanning electron microscopy analysis indicated that the morphology of the original PL-N was different from that of degraded PL-N fractions. Antioxidant activity assays in vitro indicated that the degraded PL-N fraction with low molecular weight had stronger hydroxyl radical scavenging capacity and higher TEAC and FRAP values.     

Ultrasound assisted reduction of graphene oxide to graphene in l-ascorbic acid aqueous solutions: Kinetics and effects of various factors on the rate of graphene formation

The reduction of graphene oxide (GO) to graphene (rGO) was achieved by using 20 kHz ultrasound in l-ascorbic acid (l-AA, reducing agent) aqueous solutions under various experimental conditions. The effects of ultrasound power, ultrasound pulse mode, reaction temperature, pH value and l-AA amount on the rates of rGO formation from GO reduction were investigated. The rates of rGO formation were found to be enhanced under the following conditions: high ultrasound power, long pulse mode, high temperature, high pH value and large amount of l-AA. It was also found that the rGO formation under ultrasound treatment was accelerated in comparison with a conventional mechanical mixing treatment. The pseudo rate and pseudo activation energy (E_a) of rGO formation were determined to discuss the reaction kinetics under both treatment. The E_a value of rGO formation under ultrasound treatment was clearly lower than that obtained under mechanical mixing treatment at the same condition. We proposed that physical effects such as shear forces, microjets and shock waves during acoustic cavitation enhanced the mass transfer and reaction of l-AA with GO to form rGO as well as the change in the surface morphology of GO. In addition, the rates of rGO formation were suggested to be affected by local high temperatures of cavitation bubbles.     

Synthesis of nanocomposites of iron oxide/gold (Fe3O4/Au) loaded on activated carbon and their application in water treatment by using sonochemistry: Optimization study

This paper focuses on the finding best operational conditions using response surface methodology (RSM) for Rhodamine123 (R123) and Disulfine blue (DSB) dyes removal by ultrasound assisted adsorption onto Au-Fe₃O₄ nanoparticles loaded on activated carbon (Au-Fe₃O₄ NPs-AC). The influences of variables such as initial R123 (X₁) and DSB concentration (X₂), pH (X₃), adsorbent mass (X₄) and sonication time (X₅) on their removal were investigated by small central composite design (CCD) under response surface methodology. The significant variables and the possible interactions among variables were investigated and estimated accordingly. The best conditions were set as: 4 min, 4.0, 0.025 g, 13.5 and 26.5 mg L⁻¹ for sonication time, pH, adsorbent weight, initial R123 and DSB concentration, respectively. At above conditions, the adsorption equilibrium and kinetic follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. The maximum monolayer capacity (Q_max) of 71.46 and 76.38 mg g⁻¹ for R123 and DSB show sufficiency of model for well presentation of experimental data.     

介质pH对银基上4-甲基-4H-3-巯基-1,2,4-三氮唑成膜结构和缓蚀性能影响的SERS和电化学研究

在不同pH介质中,缓蚀试剂4-甲基-4H-3-巯基-1,2,4-三氮唑(4-MTTL)都能在银基底上形成自组装膜。SERS光谱表明:当pH=3时,4-MTTL分子是以硫醇式,通过两个氮原子为吸附位点,以较平躺方式在银表面构筑自组装膜;当介质为pH=7和pH=11时,4-MTTL以硫醇式,通过氮和硫原子为吸附位点倾斜或垂直方式作用于银表面。由于后者的吸附方式比前者更为垂直于表面,所以形成的膜中分子排列更为致密。电化学极化实验也表明,在pH=3的条件下,形成的4-MTTL单层有更正的腐蚀电位;在pH=11时,构筑的膜缓蚀能力强于pH=7的。并由电化学交流阻抗数据解析了相应的缓蚀机理。     

The β‐silicon effect. 4: substituent effects on the solvolysis of 1‐alkyl‐2‐(aryldimethylsilyl)ethyl trifluoroacetates

Solvolysis rates of 2‐(aryldimethylsilyl)‐1‐methylethyl and 2‐(aryldimethylsilyl)‐1‐tert‐butylethyl trifluoroacetates were determined conductimetrically in 60% (v/v) aqueous ethanol. The effects of aryl substituents at the silicon atom on the solvolysis rates at 50 °C were correlated with parameters of r⁺ = 0.15 with the Yukawa–Tsuno equation, giving ρ values of ?1.5 for both secondary α‐Me and α‐tert‐Bu systems. The ρ values for those secondary systems are less negative than ?1.75 for the 2‐(aryldimethylsilyl)ethyl system that proceeds by the Eaborn (non‐vertical) mechanism, while they are distinctly more negative than ?0.99 for 2‐(aryldimethylsilyl)‐1‐phenylethyl system that should proceed by the Lambert (vertical) mechanism. There was a fairly linear relationship between the reaction constants (ρ) for the β‐silyl substituent effects and the solvolysis reactivities for a series of β‐silyl substrates. The solvolyses of the α‐Me and tert‐Bu substrates proceed through the transition state (TS) with an appreciable degree of the β‐silyl participation, close to the Eaborn (non‐vertical) TS rather than to the Lambert (vertical) TS. Copyright © 2010 John Wiley & Sons, Ltd.     

The effects of Si3N4 interlayer on the thermal stability and hardness of Ti/TiNx (x = 0.5-1) nanolayered coatings

The polycrystalline Ti/TiN_x multilayer films were deposited by magnetron sputtering, and the as-deposited multilayer coatings were annealed at 500-800 °C for 2-4 h in vacuum. We investigated the effects of annealing temperature and annealing time on the microstructural, interfacial, and mechanical properties of the polycrystalline Ti/TiN_x multilayer films. It was found that the hardness increased with annealing temperature. This hardness enhancement was probably caused by the preferred crystalline orientation TiN(1 1 1). The X-ray reflectivity measurements showed that the layer structure of the coatings could be maintained after annealing at 500 °C and the addition of the Si₃N₄ interlayer to Ti/TiN_x multilayer could improve the thermal stability to 800 °C.     

Calculated polar substituent effects on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations: a DFT study

The effects of substituents on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations (3) and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations (4), for a set of substituents (X = H, NO₂, CN, NC, CF₃, CHO, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH₃⁺) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) and B3LYP/6‐31 + G (d) levels of theory, respectively. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 3/4 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values for both systems are best described by a combination of both substituent constants. The result highlights the importance of the σ_χ dependency of charge delocalization in these systems. Copyright © 2012 John Wiley & Sons, Ltd.