Ultrasound enhanced the binding ability of chitinase onto chitin: From an AFM insight

In order to evaluate the effect of ultrasound to chitinase from a molecular level, atomic force microscopy (AFM) was employed to investigate the interaction force of chitinase binding onto chitin surface. In the measurement of force-distance curve, a series of pull-off events were discovered using the immobilized AFM tips with chitinase either treated by ultrasound or not, whereas no interaction peak was observed by the AFM tips without chitinase, indicating that the obtained adhesion forces were coming from the binding functions between chitinase and chitin. Through the analysis of these force curves, at the loading velocity of 0.3 μm/s, the maximum binding force of the chitinase treated by ultrasound for 20 min onto chitin was measured to be 105.33 ± 23.51 pN, while the untreated onto chitin was 71.05 ± 12.73 pN, suggesting the stronger binding force between ultrasonic treated chitinase and chitin substrate. Therefore, AFM has provided a useful method to directly and quantitatively characterize the interactions between chitinase and chitin, and successfully proved that ultrasound could activate chitinase by enhancing the binding ability of chitinase onto chitin.     

Ultrasound and heterogeneous photocatalysis for the treatment of vinasse from pisco production

Production of the distilled alcohol pisco results in vinasse, dark brown wastewater with high polyphenols contents and chemical oxygen demand (COD). No prior research exists on the efficiency of advanced oxidations processes (AOPs) in treating pisco vinasse. Therefore, the purpose of this study was to assess the efficiency of ultraviolet (UV), ultrasound (US), US + UV, heterogeneous photocatalysis (HP), and HP + US treatments. Polyphenols, COD, and color removal, as well as oxidation-reduction potential, were monitored over a 60-minute treatment period. Energy consumption levels and synergies were also calculated. The HP + US treatment achieved the best removal ratios for polyphenols (68%), COD (70%), and color (48%). While the HP treatment was the second most efficient in terms of polyphenols (62%), COD (58%), and color (40%) removal, this AOP comparatively required the least amount of energy. Considering the energy efficiency and relatively high pollutant-removal rates of the HP treatment, this AOP is recommended as a practical alternative for treating pisco vinasse.     

Effect of ultrasonic power on properties of edible composite films based on rice protein hydrolysates and chitosan

Rice protein hydrolysates (RPH) are incapable of film formation by self-crosslinking due to low molecular mass. Hence, we used chitosan (CS) as a modifier and developed rice protein hydrolysates/chitosan (RPH/CS) edible composite films by means of ultrasound. Results showed that ultrasound treatment decreased the particle size and the viscosity of film-forming solutions. The value of elongation at break of composite films was increased by 125% at 400 W compared with untreated film. The peroxide value of soybean oil was significantly reduced from 16.99 ± 0.78 meq/kg to 2.23 ± 0.09 meq/kg with the increase of ultrasonic power. Ultrasound treatment was efficient in keeping smooth on surface, and the films at ultrasound treatment of 200 W had better compatibility. Moreover, hydrogen bonds and covalent interactions were probably the main forces between RPH and CS and contributed to film formation under ultrasound treatment, which supported by analyses of Fourier transform infrared spectroscopy and X-ray diffraction. These results suggested that ultrasound was an effective method to improve the properties of edible composite films.     

Effects of ultrasound-assisted chitosan grafted caffeic acid coating on the quality and microbial composition of pompano during ice storage

The effects of ultrasound-assisted chitosan grafted caffeic acid coating on the quality and microbial composition of fresh pompano (Trachinotus ovatus) fillets during ice storage for 24 days were evaluated. Samples were treated by distilled water (CK), ultrasound (US), chitosan grafted caffeic acid coating (G), and chitosan grafted caffeic acid coating with ultrasound-assisted (USG). Results showed that samples treated with USG could inhibit the formation of corrupt substances such as TVB-N, TBA, biogenic amines (BAs), hypoxanthine (Hx), and hypoxanthine riboside (HxR) when compared to the CK group. The results of high-throughput sequencing technology observed that the major bacteria genus of fresh samples was Acinetobacter. The diversity of bacterial communities at the initial stage was more diverse than that at the end of stage. With the extension of storage time, the USG treatment could maintain the microbial diversity. The dominant microbiota was Shewanella and Brochothrix in the CK group after 24 days of storage. In addition, Brochothrix in treated groups was effectively decreased. The microbial communities of samples in all treatments were changed during storage. At the end of storage, there was a significant difference in bacterial composition between the CK and treated samples, indicating that the treatment can effectively inhibit the growth of microorganisms, especially spoilage microorganisms, and reduce the quality deterioration caused by bacteria.     

Hydrodynamic cavitation: A feasible approach to intensify the emulsion cross-linking process for chitosan nanoparticle synthesis

Chitosan nanoparticles (NPs) exhibit great potential in drug-controlled release systems. A controlled hydrodynamic cavitation (HC) technique was developed to intensify the emulsion crosslinking process for the synthesis of chitosan NPs. Experiments were performed using a circular venturi and under varying operating conditions, i.e., types of oil, addition mode of glutaraldehyde (Glu) solution, inlet pressure (P_in), and rheological properties of chitosan solution. Palm oil was more appropriate for use as the oil phase for the HC-intensified process than the other oil types. The addition mode of water-in-oil (W/O) emulsion containing Glu (with Span 80) was more favorable than the other modes for obtaining a narrow distribution of chitosan NPs. The minimum size of NPs with polydispersity index of 0.342 was 286.5 nm, and the maximum production yield (P_y) could reach 47.26%. A positive correlation was found between the size of NPs and the droplet size of W/O emulsion containing chitosan at increasing P_in. Particle size, size distribution, and the formation of NPs were greatly dependent on the rheological properties of the chitosan solution. Fourier transform infrared spectroscopy (FTIR) analysis indicated that the molecular structure of palm oil was unaffected by HC-induced effects. Compared with ultrasonic horn, stirring-based, and conventional drop-by-drop processes, the application of HC to intensify the emulsion crosslinking process allowed the preparation of a finer and a narrower distribution of chitosan NPs in a more energy-efficient manner. The novel route developed in this work is a viable option for chitosan NP synthesis.     

SEM characterization of anatomical variation in chitin organization in insect and arthropod cuticles

The cuticles of insects and arthropods have some of the most diverse material properties observed in nature, so much so that it is difficult to imagine that all cutciles are primarily composed of the same two materials: a fibrous chitin network and a matrix composed of cuticle proteins. Various factors contribute to the mechanical and optical properties of an insect or arthropod cuticle including the thickness and composition. In this paper, we also identified another factor that may contribute to the optical, surface, and mechanical properties of a cuticle, i.e. the organization of chitin nanofibers and chitin fiber bundles. Self-assembled chitin nanofibers serve as the foundation for all higher order chitin structures in the cuticles of insects and other arthropods via interactions with structural cuticle proteins. Using a technique that enables the characterization of chitin organization in the cuticle of intact insects and arthropod exoskeletons, we demonstrate a structure/function correlation of chitin organization with larger scale anatomical structures. The chitin scaffolds in cuticles display an extraordinarily diverse set of morphologies that may reflect specific mechanical or physical properties. After removal of the proteinaceous and mineral matrix of a cuticle, we observe using SEM diverse nanoscale and micro scale organization of in-situ chitin in the wing, head, eye, leg, and dorsal and ventral thoracic regions of the periodical cicada Magicicada septendecim and in other insects and arthropods. The organization of chitin also appears to have a significant role in the organization of nanoscale surface structures. While microscale bristles and hairs have long been known to be chitin based materials formed as cellular extensions, we have found a nanostructured layer of chitin in the cuticle of the wing of the dog day annual cicada Tibicen tibicens, which may be the scaffold for the nanocone arrays found on the wing. We also use this process to examine the chitin organizations in the fruit fly, Drosophila melanogaster, and the Atlantic brown shrimp, Farfantepenaeus aztecus. Interestingly many of the homologous anatomical structures from diverse arthropods exhibit similar patterns of chitin organization suggesting that a common set of parameters, govern chitin organization.     

Functionalized alginate/chitosan biocomposites consisted of cylindrical struts and biologically designed for chitosan release

A novel alginate/chitosan composite scaffold was developed. The composite scaffolds were fabricated at low temperature using a three-axis robot system connected to a micro-dispenser and a core/shell nozzle. The structure of the composite scaffolds included hollow struts; deposited chitosan on the inner walls (core region) of the struts reacted electrostatically with the alginate layer (shell region). The fabricated, highly porous composite scaffolds exhibited excellent mechanical properties and controllable chitosan release, which was closely dependent on the weight fraction of the alginate in the shell region. The tensile strength in the dry state was ∼1.8-fold greater than that of pure alginate scaffold due to the ionic interaction between alginate and chitosan. To determine the feasibility of using the developed scaffold in tissue regeneration applications, in vitro cellular responses were evaluated using osteoblast-like-cells (MG63). The cell proliferation on the composite scaffold was ∼3.4-fold greater than that on the pure alginate scaffold. Alkaline phosphate activity and calcium deposition of the composite scaffold after 14 and 21 days of cell culture were significantly enhanced (1.6- and 1.8-fold greater, respectively) compared with those of the pure alginate scaffold. These results suggested that the alginate/chitosan composite scaffolds with a controlled chitosan release have great potential for use in regenerating various tissues.     

Ultrasound assisted chitosan coated iron oxide nanoparticles: Influence of ultrasonic irradiation on the crystallinity,stability, toxicity and magnetization of the functionalized nanoparticles

Due to unique reaction conditions of the acoustic cavitation process, ultrasound-assisted synthesis of nanoparticles has attracted increased research attention. In this study, we demonstrate the effect of ultrasonic irradiation on the crystallinity, stability, biocompatibility, and magnetic properties of chitosan-coated superparamagnetic iron oxide nanoparticles (CS-SPIONs). CS solution and colloidal suspension of SPIONs were mixed and sonicated using an ultrasonic probe of 1.3 cm tip size horn, frequency (20 kHz), and power (750 W). Different samples were sonicated for 1.5, 5, and 10 min with corresponding acoustic powers of 67, 40 and 36 W, and the samples were denoted S_1.5, S_5, and S₁₀, respectively. The samples were characterized using X-ray diffractometer (XRD), Energy dispersive X-ray (EDX), Transmission electronic microscope (TEM), Fourier transform infrared spectroscopy (FTIR), Zeta sizer, and vibrating sample magnetometer (VSM). Cell cytotoxicity and cell uptake were investigated with human embryonic kidney 293 (HEK-293) cells through MTT assay and Prussian blue staining, respectively. The sharp peaks of the XRD pattern were disappearing with an increase in the sonication period but a decrease in acoustic power. EDX analysis also demonstrates that atomic and weight percentages of the various elements in the samples were decreasing with an increase in the sonication period. However, the Zeta potential (ζ) values increase with an increase in the sonication period.The saturation magnetization (M_s) of the S_1.5 before and after the coating is 62.95 and 86.93 emu/g, respectively. Cell cytotoxicity and uptake of the S_1.5 show that above 70% of cells were viable at the highest concentration and the longest incubation duration. Importantly, the CS-SPIONs synthesized by the sonochemical method are non-toxic and biocompatible.     

Ultrasound microwave-assisted enzymatic production and characterisation of antioxidant peptides from sweet potato protein

Herein, we investigated the effects of ultrasound microwave (UM)-assisted hydrolysis using Alcalase (ALC), Flavourzyme (FLA), and their combination (ALC + FLA), on the production of sweet potato protein hydrolysates (SPPH). UM-assisted enzymatic hydrolysis significantly increased the degree of hydrolysis of SPPH compared with untreated (UN) samples. Fractions with differences in molecular weight (MW) of >10, 3–10, and < 3 kDa in SPPH from UM-assisted ALC, FLA, and ALC + FLA hydrolysis displayed higher antioxidant activities than those from UN samples. MW < 3 kDa fractions of SPPH from UM-assisted ALC and ALC + FLA hydrolysis treatments presented much stronger Fe²⁺-chelating activity (98.48% and 98.59%), ·OH scavenging activity (67.11% and 60.06%), and higher ORAC values (110.32 and 106.32 µg TE/mL), from which diverse peptides with potential antioxidant activities were obtained by semi-preparative HPLC and LC-MS/MS. All identified peptide sequences exhibited at least three potential antioxidant amino acids. Additionally, changes in peptide conformational structure and antioxidant amino acid composition were revealed by structure–activity relationship analysis. Thus, ultrasound microwave treatment has great potential in antioxidant peptides production.     

Ultrasound assisted cyanotoxin extraction for nematode inhibition in soil

Root-knot nematodes are one of the plant damaging nematodes in agriculture causing a projected annual yield loss of ∼12 % (∼$160 billion) worldwide. Conventional solutions to control these plant-parasitic nematodes involve chemical nematicides. To reduce the use of harmful chemicals, microalgal extracts can be used as greener alternatives for nematode management. Microalgae produce valuable metabolites, including cyanotoxins which can aid in nematode suppression.In this study, two microalgae species, Trichormus variabilis and Nostoc punctiforme, were treated with ultrasound for intensified recovery of secondary metabolites. Ultrasound results in cell wall disruption of the microalgal species, thus resulting in enhanced release of secondary metabolites. Microalgal biomass was treated with an ultrasound probe at 50 % amplitude, 20 kHz frequency, using water as the extraction medium, for 5–30 min. The extraction efficiency was determined in terms of the total chlorophyll (Chl) content of the extract. Microscopic images of the treated cells were also investigated to gain insight into the effect of the ultrasonication time on the cell morphology. Our results suggest that ultrasonication resulted in the intensified release of secondary metabolites, as established through the total chlorophyll content of the ultrasonicated microalgal samples as well as the microscopic images of the ruptured cells. The best extraction for Trichormus variabilis was achieved with 15 min extraction time where the Total Chl content increased by 29 times (compared to the non-ultrasonicated sample), and for the Nostoc punctiforme, 30 min extraction time gave the highest metabolite recovery of 6.4 times higher than the non-ultrasonicated sample.Ultrasonicated algal extracts were then tested for their nematicidal potential against root-knot nematode, Meloidogyne hapla, in infested field soil samples. Experimental study was conducted using different concentrations of each microalga, Trichormus sp. and Nostoc sp., individually, as well as in combination. The nematode count for the treated soil was compared with that of the control (untreated soil). Ultrasonicated microalgal extracts showed 66% to 100% inhibition on root-knot nematodes in the soil samples tested.     

Hybrid of chitin and humic acid as high performance sorbent for Ni(II)

Hybrid of humic acid (HA) and chitin has been synthesized and the hybrid material (chitin-HA) was then applied as sorbent to adsorb Ni(II). The HA was extracted from peat soil of Gambut District, South Kalimantan, Indonesia, according to the procedure recommended by IHSS (International Humic Substances Society). The chitin was isolated from crab shell waste of sea food restaurants through deproteination using NaOH 3.5% (w/v) and followed by removal of inorganic impurities using HCl 1 M. The synthesis of chitin-HA was performed by reacting gelatinous chitin solution in HCl 0.5 M and HA solution in NaOH 0.5 M. Parameters investigated in this work consists of effect of medium acidity on the sorption, sorption rate (k_s) and desorption rate (k_d) constants, Langmuir (monolayer) and Freundlich (multilayer) sorption capacities, and energy (E) of sorption. The k_s and k_d were determined according to a kinetic model of first order sorption reaching equilibrium, monolayer sorption capacity (b) and energy (E) were determined according to the Langmuir isotherm model, and multilayer sorption capacity (B) was determined based on the Freundlich isotherm model.Sorption of Ni(II) on both chitin and chitin-HA was maximum at pH 8.0. The kinetic expression resulted from the proposed kinetic model has been shown to be more applicable than the commonly known Lagergren equation obtained from the pseudo-first order sorption model. The application of the proposed model revealed that the presence of HA increased the k_s from 0.018 min⁻¹ for chitin to 0.031 min⁻¹ for chitin-HA. As for k_s, the value of b was also bigger in the presence of HA, i.e. 7.42 × 10⁻⁵ mol/g for chitin and 9.93 × 10⁻⁵ mol/g for the chitin-HA. Unlike k_s and b, the value of E slightly decreased from 23.23 to 21.51 kJ/mol for the absence and presence of HA, respectively. It can also be deduced that the presence of HA on chitin contributed more to the additional layer of Ni(II) sorbed on sorbent. Without HA, B for chitin was only 6.17 times higher than b, while with the presence of HA, the enhancement of the sorption capacity from the multilayer (B) to the monolayer (b) was 19.40. The increase of k_s, b, B, and the decrease of E would be very benefit in the real application of chitin-HA for the recovery of Ni(II) from aqueous samples.     

超声方法对于海藻酸钠的降解反应研究

用超声方法对海藻酸钠溶液进行了降解研究,研究了各种因素对降解效果的影响,得出了聚合物溶液特性粘度与降解时间的经验公式。     

Ultrasound/chlorine sono-hybrid-advanced oxidation process: Impact of dissolved organic matter and mineral constituents

In this work, after exploring the first report on the synergism of combining ultrasound (US: 600 kHz) and chlorine toward the degradation of Allura Red AC (ARAC) textile dye, as a contaminant model, the impact of various mineral water constituents (Cl⁻, SO₄²⁻, NO₃⁻, HCO₃⁻ and NO₂⁻) and natural organic matter, i.e., humic acid (HA), on the performance of the US/chlorine sono-hybrid process was assessed for the first time. Additionally, the process effectiveness was evaluated in a real natural mineral water (NMW) of a known composition. Firstly, it was found that the combination of ultrasound and chlorine (0.25 mM) at pH 5.5 in cylindrical standing wave ultrasonic reactor (f = 600 kHz and P_e = 120 W, equivalent to P_A ∼ 2.3 atm) enhanced in a drastic manner the degradation rate of ARAC; the removal rate being 320% much higher than the arithmetic sum of the two separated processes. The source of the synergistic effect was attributed to the effective implication of reactive chlorine species (RCS: Cl, ClO and Cl₂⁻) in the degradation process. Radical probe technique using nitrobenzene (NB) as a specific quencher of the acoustically generated hydroxyl radical confirmed the dominant implication of RCS in the overall degradation rate of ARAC by US/chlorine system. Overall, the presence of humic acid and mineral anions decreased the efficiency of the sono-hybrid process; however, the inhibition degrees depend on the type and the concentration of the selected additives. The reaction of these additives with the generated RCS is presumably the reason for the finding results. The inhibiting effect of Cl⁻, SO₄²⁻, NO₃⁻ and NO₂⁻ was more pronounced in US/chlorine process as compared to US alone, whereas the inverse scenario was remarked for the effect of HA. These outcomes were associated to the difference in the reactivity of HA and mineral anions toward RCS and OH oxidizing species, in addition to the more selective character of RCS than hydroxyl radical. The displacement of the reaction zone with increasing the additive concentration may also be another influencing factor that favors competition reactions, which subsequently reduce the available reactive species in the reacting medium. The NMW exerted reductions of 43% and 10% in the process efficiency at pH 5.5 and 8, respectively, thereby confirming the RCS-quenching mechanism by the water matrix constituents. Hence, this work provided a precise understanding of the overall mechanism of chlorine activation by ultrasound to promote organic compounds degradation in water.     

Ultrasound influence on the solubility of solid dispersions prepared for a poorly soluble drug

Solid dispersions have been successfully used to enhance the solubility of several poorly water soluble drugs. Solid dispersions are produced by melting hydrophilic carriers and mixing in the poorly water soluble drug. Supersaturation is obtained by quickly cooling the mixture until it solidifies, thereby entrapping the drug. The effects of using ultrasound to homogenize the molten carrier and drug mixture were studied. In particular, the increase in drug solubility for the resulting solid dispersions was analyzed. Piroxicam, which has very low water solubility, was used as a model drug. A full factorial design was used to analyze how sonication parameters affected the solubility and in vitro release of the drug. The results show that the use of ultrasound can significantly increase the solubility and dissolution rate of the piroxicam solid dispersion. Pure piroxicam presented a solubility of 13.3 μg/mL. A maximum fourfold increase in solubility, reaching 53.8 μg/mL, was observed for a solid dispersion sonicated at 19 kHz for 10 min and 475 W. The in vitro dissolution rate test showed the sonicated solid dispersion reached a maximum rate of 18%/min, a sixfold increase over the piroxicam rate of 2.9%/min. Further solid state characterization by thermal, X-ray diffraction and Fourier transform infrared analyses also showed that the sonication process, in the described conditions, did not adversely alter the drug or significantly change its polymorphic form. Ultrasound is therefore an interesting technique to homogenize drug/carrier mixtures with the objective of increasing the solubility of drugs with poor water solubility.     

Influence of surface morphology of cpTi on the adsorption and attachment of collagen/chitosan

The surface microtopography of implant influences distinctly the rate of bone-formation and the ratio of bone-implant contact. However, it is indicated that the surface of titanium implant existed contamination after different surface treatments. Chitosan is one of the most abundant natural polymers for its adsorption property for metal ions. In this study, we report on the pretreatment of the metal surface and aim to compare the efficacy of three treatments for the binding ability of collagen/chitosan (CL/CS). The compound of collagen and chitosan was immobilized on the titanium oxide and the morphology and chemical composition were used to characterize the titanium surfaces by scanning electron microscope (SEM), X-ray photoelectron spectrometry (XPS). The result showed that the surface displayed irregularities after roughness treatments and the rough surface was beneficial to the adsorption and attachment of CL/CS. The combination of CL/CS was related with the titanium surface character.     

Ultrasound irradiation as an effective tool in synthesis of the slag-based catalysts for carboxymethylation

Waste minimization strategy was applied in the current work for synthesis of the catalysts from industrial solid waste, namely desulfurization slag. The starting slag material comprising CaCO₃, Ca(OH)₂, SiO₂, Al₂O₃, Fe₂O₃, and TiO₂ was processed by various treating agents systematically varying the synthesis parameters. A novel efficient technique – ultrasound irradiation, was applied as an additional synthesis step for intensification of the slag dissolution and crystallization of the new phases. Physico-chemical properties of the starting materials and synthesized catalysts were evaluated by several analytical techniques. Treatment of the industrial slag possessing initially poor crystal morphology and a low surface area (6 m²/g) resulted in formation of highly-crystalline catalysts with well-developed structural properties. Surface area was increased up to 49 m²/g. High basicity of the neat slag as well as materials synthesized on its basis makes possible application of these materials in the reactions requiring basic active sites. Catalytic performance of the synthesized catalysts was elucidated in the synthesis of carbonate esters by carboxymethylation of cinnamyl alcohol with dimethyl carbonate carried out at 150 °C in a batch mode. Ultrasonication of the slag had a positive effect on the catalytic activity. Synthesized catalysts while exhibiting similar selectivity to the desired product (ca. 84%), demonstrated a trend of activity increase for materials prepared using ultrasonication pretreatment. The choice of the treating agent also played an important role in the catalytic performance. The highest selectivity to the desired cinnamyl methyl carbonate (88%) together with the highest activity (TOF₃₅ = 3.89*10⁻⁷ (mol/g*s)) was achieved over the material synthesized using 0.6 M NaOH solution as the treating agent with the ultrasound pre-treatment at 80 W for 4 h.     

Ultrasound for microalgal cell disruption and product extraction: A review

Microalgae are a promising feedstock for the production of biofuels, nutraceuticals, pharmaceuticals and cosmetics, due to their superior capability of converting solar energy and CO₂ into lipids, proteins, and other valuable bioactive compounds. To facilitate the release of these important biomolecules from microalgae, effective cell disruption is usually necessary, where the use of ultrasound has gained tremendous interests as an alternative to traditional methods. This review not only summarizes the mechanisms of and operation parameters affecting cell disruption, but also takes an insight into measuring techniques, synergistic integration with other disruption methods, and challenges of ultrasonication for microalgal biorefining. Optimal conditions including ultrasonic frequency, intensity, and duration, and liquid viscosity and sonochemical reactor are the key factors for maximizing the disruption and extraction efficiency. A combination of ultrasound with other disruption methods such as ozonation, microwave, homogenization, enzymatic lysis, and solvents facilitates cell disruption and release of target compounds, thus provides powerful solutions to commercial scale-up of ultrasound extraction for microalgal biorefining. It is concluded that ultrasonication is a sustainable “green” process, but more research and work are needed to upscale this process without sacrificing performance or consuming more energy.     

Effect of chitosan and thiolated chitosan coating on the inhibition behaviour of PIBCA nanoparticles against intestinal metallopeptidases

Surface modified nanoparticles composed of poly(isobutylcyanoacrylate) (PIBCA) cores surrounded by a chitosan and thiolated chitosan gel layer were prepared and characterized in previous works. The presence of such biopolymers on the nanoparticle surface conferred those nanosystems interesting characteristics that might partially overcome the gastrointestinal enzymatic barrier, improving the oral administration of pharmacologically active peptides. In the present work, the antiprotease behaviour of this family of core–shell nanoparticles was in vitro tested against two model metallopeptidases present in the gastrointestinal tract (GIT): Carboxypeptidase A -CP A- (luminal protease) and Leucine Aminopeptidase M -LAP M- (membrane protease). As previous step, the zinc-binding capacity of these nanoparticles was evaluated. Interestingly, an improvement of both the zinc-binding capacity and the antiprotease effect of chitosan was observed when the biopolymers (chitosan and thiolated chitosan) were used as coating component of the core–shell nanoparticles, in comparison with their behaviour in solution, thanks to the different biopolymer chains rearrangement. The presence of amino, hydroxyl and thiol groups on the nanoparticle surface promoted zinc binding and hence the inhibition of the metallopeptidases analysed. On the contrary, the occurrence of a cross-linked structure in the gel layer surrounding the PIBCA cores of thiolated formulations, due to the formation of interchain and intrachain disulphide bonds, partially limited the inhibition of the proteases. The low accessibility of cations to the active groups of the cross-linked polymeric shell was postulated as a possible explanation of this behaviour. Results obtained in this work make this family of surface-modified nanocarriers promising candidates for the successfull administration of pharmacologically active peptides and proteins by the oral route.