Formation of soybean protein isolate-hawthorn flavonoids non-covalent complexes: Linking the physicochemical properties and emulsifying properties

In recent years, more and more attention had been paid to the combination of proteins and flavonoids, and several flavonoids had been reported to improve the physicochemical and emulsifying properties of proteins. This study investigated the effects of ultrasonic treatment (450 W for 10 min, 20 min, and 30 min) on the physicochemical properties, antioxidant activity, and emulsifying properties of soy protein isolate (SPI) -hawthorn flavonoids (HF) non-covalent complexes. The results showed that the addition of HF to SPI and 20 min of ultrasound could reduce α-helix and random coil, increase β-sheet and β-turn, and enhance fluorescence quenching. In addition, it decreased the particle size, zeta potential, surface hydrophobicity, and turbidity to 88.43 or 95.27 nm, −28.80 mV, 1250.42, and 0.23, respectively. The protein solubility, free sulfhydryl group, antioxidant activity, emulsifying activity index, and emulsifying stability index all increased to 73.93%, 15.07 μmol/g, 71.00 or 41.91%, 9.81 m²/g, and 67.71%, respectively. Moreover, high-density small and low-flocculation droplets were formed. Therefore, the combined ultrasound treatment and addition of HF to SPI is a more effective method for protein modification compared to ultrasound treatment alone. It provides a theoretical basis for protein processing and application in the future.     

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil–water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.     

High-intensity ultrasound modified the functional properties of Neosalanx taihuensis myofibrillar protein and improved its emulsion stability

This study aimed to investigate the effects of high-intensity ultrasound treatment on the functional properties and emulsion stability of Neosalanx taihuensis myofibrillar protein (MP). The results showed that the carbonyl groups, emulsification properties, intrinsic fluorescence intensity, and surface hydrophobicity of the ultrasound treated MP solution were increased compared to the MP without ultrasound treatment. The results of secondary structure showed that the ultrasound treatment could cause a huge increase of β-sheet and a decline of α-helix of MP, indicating that ultrasound induced molecular unfolding and stretching. Moreover, ultrasound reduced the content of total sulfhydryl and led to a certain degree of MP cross-linking. The microscopic morphology of MP emulsion indicated that the emulsion droplet decreased with the increase of ultrasound power. In addition, ultrasound could also increase the storage modulus of the MP emulsion. The results for the lipid oxidation products indicated that ultrasound significantly improved the oxidative stability of N. taihuensis MP emulsions. This study offers an important reference theoretically for the ultrasound modification of aquatic proteins and the future development of N. taihuensis deep-processed products represented by surimi.     

Effects of ultrasonic conditions on the interfacial property and emulsifying property of cellulose nanoparticles from ginkgo seed shells

Cellulose microparticles from ginkgo seed shells were treated by ultrasonic treatments within the selected output powders (150–600 W) and durations (10–60 min) to produce cellulose nanoparticles. The main aim of this study was to investigate effects of ultrasonic conditions on the interfacial property and emulsifying property of those cellulose nanoparticles. Compared to ultrasonic output powers, ultrasonic durations showed the greater influence on morphology and physical properties of cellulose nanoparticles. Atomic force microscopy revealed that noodle-like cellulose particles with 1100 nm in length gradually became the short rod-like nanoparticles with 300 nm in length with increasing of ultrasonic duration from 10 min to 60 min. Moreover, results of contact angles indicated that ultrasound could significantly improve hydrophobicity of cellulose nanoparticles. The interfacial shear rheology showed that although all cellulose nanoparticles exhibited the similar interface adsorption behavior which showed the initial lag-phase of adsorption, followed by the interface saturation, the time of this initial lag-phase was affected by ultrasonic conditions. The increase of ultrasonic duration and ultrasonic power could shorten the time of this initial lag-phase, suggesting the resulting cellulose nanoparticles easier adsorption at the O/W interface. It was probably attributed to its small size and high hydrophobicity induced by intense ultrasonic treatments. Meanwhile, the cellulose nanoparticles with small size and higher hydrophobicity exhibited the better emulsifying ability to stabilize oil-in-water emulsions due to the formation of the viscoelastic interfacial film. This study improved understanding about changes in interfacial and emulsifying properties of cellulose nanoparticles caused by ultrasonic treatments.     

Improvement of the emulsifying properties of mixed emulsifiers by optimizing ultrasonic-assisted processing

Optimizing ultrasound (ULD)-assisted flavonoid modification is an important component of enhancing its application potential. In this work, diverse flavonoids, such as quercetin (Que), apigenin (Api), and morin (Mor), were used to modify protein in myofibrillar protein (MP)/cellulose nanocrystal (CN) complexes using ULD-assisted method. Compared with the MP/CNs group, the triiodide contents of MP-Que/CNs, MP-Api/CNs, and MP-Mor/CNs increased by 1175.84%, 479.05%, and 2281.50% respectively. The findings revealed that the actual intensity of ULD was drastically reduced by the molecular weight decrease of these flavonoids. For olive oil emulsions prepared with mixed emulsifiers, the low interfacial diffusion rates (0.03 mN·m·s^−1/2) and weak emulsifying activity (8.33 m²/g) of the MP/CN complexes were significantly improved by the flavonoids after ULD-assisted treatment. Notably, the emulsions prepared using MP-Api/CNs contained smaller oil droplets and exhibited better emulsifying properties, compared to emulsions prepared with MP-Mor/CNs or MP-Que/CNs. This study is essential for ULD-assisted treatment since the processing impact may be increased by choosing the most suitable flavonoid.     

Effects of ultrasound on the structural and emulsifying properties and interfacial properties of oxidized soybean protein aggregates

Oxidative attack leads to the oxidative aggregation and structural and functional feature weakening of soybean protein. We aimed to investigate the impact of ultrasonic treatment (UT) with different intensities on the structure, emulsifying features and interfacial features of oxidized soybean protein aggregates (OSPI). The results showed that oxidative treatment could disrupt the native soy protein (SPI) structure by promoting the formation of oxidized aggregates with β1-sheet structures through hydrophobic interactions. These changes led to a decrease in the solubility, emulsification ability and interfacial activity of soybean protein. After low-power ultrasound (100 W, 200 W) treatment, the relative contents of β1-sheets, β2-sheets, random coils, and disulfide bonds of the OSPI increased while the surface hydrophobicity, absolute ζ-potential value and free sulfhydryl content decreased. Moreover, protein aggregates with larger particle sizes and poor solubility were formed. The emulsions prepared using the OSPI showed bridging flocculation and decreased protein adsorption and interfacial tension. After applying medium-power ultrasound (300 W, 400 W, and 500 W) treatments, the OSPI solubility increased and particle size decreased. The α-helix and β-turn contents, surface hydrophobicity and absolute ζ-potential value increased, the structure unfolded, and the disulfide bond content decreased. These changes improved the emulsification activity and emulsion state of the OSPI and increased the protein adsorption capacity and interfacial tension of the emulsion. However, after a high-power ultrasound (600 W) treatment, the OSPI showed a tendency to reaggregate, which had a certain negative effect on the emulsification activity and interfacial activity. The results showed that UT at an appropriate power could depolymerize OSPI and improve the emulsification and interfacial activity of soybean protein.     

Improved mechanical properties of retorted carrots by ultrasonic pre-treatments

The use of ultrasound pre-processing treatment, compared to blanching, to enhance mechanical properties of non-starchy cell wall materials was investigated using carrot as an example. The mechanical properties of carrot tissues were measured by compression and tensile testing after the pre-processing treatment prior to and after retorting. Carrot samples ultrasound treated for 10 min at 60 °C provided a higher mechanical strength (P < 0.05) to the cell wall structure than blanching for the same time period. With the addition of 0.5% CaCl₂ in the pre-treatment solution, both blanching and ultrasound treatment showed synergistic effect on enhancing the mechanical properties of retorted carrot pieces. At a relatively short treatment time (10 min at 60 °C) with the use of 0.5% CaCl₂, ultrasound treatment achieved similar enhancement to the mechanical strength of retorted carrots to blanching for a much longer time period (i.e. 40 min). The mechanism involved appears to be related to the stress responses present in all living plant matter. However, there is a need to clarify the relative importance of the potential stress mechanisms in order to get a better understanding of the processing conditions likely to be most effective. The amount of ultrasound treatment required is likely to involve low treatment intensities and there are indications from the structural characterisation and mechanical property analyses that the plant cell wall tissues were more elastic than that accomplished using low temperature long time blanching.     

The droplet breakup model and characteristics of pH-shifted peanut protein isolate-high methoxyl pectin stabilised emulsions under ultrasound

The effect of pH on the occurrence states of peanut protein isolate (PPI) and high methoxyl pectin (HMP), and droplet breakup model of the emulsions under ultrasound were studied. Particle size distribution and scanning electron microscopy results showed that PPI-HMP existed a soluble complex at pH 5.0, had no interaction at pH 7.0, and was co-soluble at pH 9.0. Droplet breakup model results revealed that the characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and 9.0. The average diameter of the droplet well satisfied the model. According to rheological properties, interface tension, and microstructure, the formation mechanism and characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and pH 9.0. The research provided a reference for constructing emulsions using pH-shifted PPI-HMP under ultrasound.     

Effect of high-intensity ultrasound on the physicochemical properties,microstructure, and stability of soy protein isolate-pectin emulsion

In this study, an emulsion stabilized by soy protein isolate (SPI)-pectin (PC) complexes was prepared to investigate the effects of high-intensity ultrasound (HIU) treatment (150–600 W) on the physicochemical properties, microstructure, and stability of emulsions. The results found that the emulsion treated at 450 W showed the best emulsion stability index (ESI) (25.18 ± 1.24 min), the lowest particle size (559.82 ± 3.17 nm), the largest ζ-potential absolute value (16.39 ± 0.18 mV), and the highest adsorbed protein content (27.31%). Confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) revealed that the emulsion aggregation was significantly improved by ultrasound treatment, and the average roughness value (Rq) was the smallest (10.3 nm) at 450 W. Additionally, HIU treatment reduced the interfacial tension and apparent viscosity of the emulsion. Thermal stability was best when the emulsion was treated at 450 W, D₄₃ was minimal (907.95 ± 31.72 nm), and emulsion separation also improved. Consequently, the creaming index (CI) was significantly decreased compared to the untreated sample, indicating that the storage stability of the emulsion was enhanced.     

Effects of ultrasound treatment on the morphological characteristics,structures and emulsifying properties of genipin cross-linked myofibrillar protein

Genipin is a natural crosslinker that improves the functional properties of proteins by modifying its structures. This study aimed to investigate the effects of sonication on the emulsifying properties of different genipin concentration-induced myofibrillar protein (MP) cross-linking. The structural characteristics, solubility, emulsifying properties, and rheological properties of genipin-induced MP crosslinking without sonication (Native), sonication before crosslinking (UMP), and sonication after crosslinking (MPU) treatments were determined, and the interaction between genipin and MP were estimated by molecular docking. The results demonstrated that hydrogen bond might be the main forces for genipin binding to the MP, and 0.5 μM/mg genipin was a desirable concentration for protein cross-linking to improve MP emulsion stability. Ultrasound treatment before and after crosslinking were better than Native treatment to improve the emulsifying stability index (ESI) of MP. Among the three treatment groups at the 0.5 μM/mg genipin treatment, the MPU treatment group showed the smallest size, most uniform protein particle distribution, and the highest ESI (59.89%). Additionally, the highest α-helix (41.96%) in the MPU + G5 group may be conducive to the formation of a stable and multilayer oil–water interface. Furthermore, the free groups, solubility, and protein exposure extent of the MPU groups were higher than those of UMP and Native groups. Therefore, this work suggests that the treatment of cross-linking followed by ultrasound (MPU) could be a desirable approach for improving the emulsifying stability of MP.     

Physical and chemical characteristics of ultrasonically-prepared water-in-diesel fuel: Effects of ultrasonic horn position and water content

An ultrasonic technique was applied to preparation of two-phase water-in-oil (W/O) emulsified fuel of water/diesel oil/surfactant. In this study, an ultrasonic apparatus with a 28 kHz rod horn was used. The influence of the horn tip position during ultrasonic treatment, sonication time and water content (5 or 10 vol%) on the emulsion stability, viscosity, water droplet size and water surface area of emulsion fuels prepared by ultrasonication was investigated. The emulsion stability of ultrasonically-prepared fuel significantly depended on the horn tip position during ultrasonic irradiation. It was found that the change in the stability with the horn tip position was partly related to that in the ultrasonic power estimated by calorimetry. Emulsion stability, viscosity and sum of water droplets surface area increased and water droplet size decreased with an increase in sonication time, and they approached each limiting value in the longer time. The maximum values of the viscosity and water surface area increased with water content, while the limiting values of the emulsion stability and water droplet size were almost independent of water content. During ultrasonication of water/diesel oil mixture, the hydrogen and methane were identified and the cracking of hydrocarbon components in the diesel oil occurred. The combustion characteristics of ultrasonically-prepared emulsion fuel were studied and compared with those of diesel oil. The soot and NOx emissions during combustion of the emulsified fuel with higher water contents were significantly reduced compared with those during combustion of diesel oil.     

Effect of polyphenolic structure and mass ratio on the emulsifying performance and stability of emulsions stabilized by polyphenol-corn amylose complexes

O/W emulsions stabilized by polyphenol/amylose (AM) complexes with several polyphenol/AM mass ratios and different polyphenols (gallic acid (GA), epigallocatechin gallate (EGCG) and tannic acid (TA)) were prepared by a high-intensity ultrasound emulsification technique. The effect of the pyrogallol group number of polyphenols and the mass ratio of polyphenols/AM on polyphenol/AM complexes and emulsions was studied. The soluble and/or insoluble complexes gradually formed upon adding polyphenols into the AM system. However, insoluble complexes were not formed in the GA/AM systems because GA has only one pyrogallol group. In addition, the hydrophobicity of AM could also be improved by forming polyphenol/AM complexes. The emulsion size decreased with increasing pyrogallol group number on the polyphenol molecules at a fixed ratio, and the size could also be controlled by the polyphenol/AM ratio. Moreover, all emulsions presented various degrees of creaming, which was restrained by decreasing emulsion size or the formation of a thick complex network. The complex network was enhanced by increasing the ratio or pyrogallol group number on the polyphenol molecules, which was because the increasing number of complexes was adsorbed onto the interface. Altogether, compared to GA/AM and EGCG/AM, the TA/AM complex emulsifier had the best hydrophobicity and emulsifying properties, and the TA/AM emulsion had the best emulsion stability.     

Effect of high-intensity ultrasound on the structural,rheological, emulsifying and gelling properties of insoluble potato protein isolates

The denaturation and lower solubility of commercial potato proteins generally limited their industrial application. Effects of high-intensity ultrasound (HIU) (200, 400, and 600 W) and treatment time (10, 20, and 30 min) on the physicochemical and functional properties of insoluble potato protein isolates (ISPP) were investigated. The results revealed that HIU treatment induced the unfolding and breakdown of macromolecular aggregates of ISPP, resulting in the exposure of hydrophobic and R–SH groups, and reduction of the particle size. These active groups contributed to the formation of a dense and uniform gel network of ISPP gel and insoluble potato proteins/egg white protein (ISPP/EWP) hybrid gel. Furthermore, the increase of solubility and surface hydrophobicity and the decrease of particle size improved the emulsifying property of ISPP. However, excessive HIU treatment reduced the emulsification and gelling properties of the ISPP. Meanwhile, HIU treatment changes the secondary structure of ISPP. It could be speculated that the formation of a stable secondary structure of ISPP initiated by cavitation and shearing effect might play a dominant role on gel strengthens and firmness. Meanwhile, the decrease in relative content of β-turn had a positive effect on the formation of small particle to improve emulsifying property of ISPP.     

Development of sheared and ultra-pure DNA thin films prepared by ultrasonication and purification

DNA solutions were prepared by ultrasonication and purification to compare the characteristics between DNA solutions different in size, purity, or both. Ultrasonication effectively minimized the size variation in native DNA, while purification enhanced the transparency of fabricated DNA thin film. Each DNA solution was used to fabricate water-soluble or organic-soluble thin film. According to the electrical measurement of DNA and CTMA-modified DNA thin films and the fluorescence measurement of PicoGreen-embedded DNA thin films, ultrasonication and purification affect the electrical characteristics and intercalating efficiency of DNA thin films. The electrical properties of the water-soluble thin film and the organic-dissolved thin film were predominantly affected by purification, but opposite tendencies were observed. The highest resistance was observed in water-soluble DNA thin film fabricated from ultra-pure DNA, whereas organic-soluble DNA thin film from ultra-pure DNA showed the lowest resistance. Ultrasonication showed a synergistic effect on PicoGreen-DNA insertion, whereas purification suppressed the fluorescence signal.     

Electrical and Raman properties of p-type and n-type modified graphene by inorganic quantum dot and organic molecule modification

We obtained n-type and p-type modified graphene by mixing quantum dots and depositing electron-acceptor molecules on the surface of graphene, respectively. The electrical and optical properties of these two types of samples were measured. For n-type modified graphene, the electrons were transferred from quantum dots to graphene. The resistance of these quantum dots in modified n-type graphene is significantly smaller than that of pristine graphene. For p-type graphene, modified by electron-acceptor organic ...     

Analysis of semibatch emulsion polymerization: role of ultrasound and initiator

In this work semibatch miniemulsion was carried out wherein the effect of free radicals produced by ultrasound and an external addition of initiator was examined. Influence of different variables on polymerization rate and polymer particle size has also been investigated. Over a range of 0-4% (by wt) initiator, the polymerization rate was found to increase over a range of 0.56-1.33 g L⁻¹ min⁻¹. Similarly monomer concentration range (7.2-15 wt.%) changed the polymerization rate from 1.33 to 2.61 g L⁻¹ min⁻¹. Under optimum parametric conditions polymer particle size 50 nm were obtained with a narrow size distribution. Syndiotactic phase of PMMA was observed by controlling the formulation recipe. Although, number of reports could be found in the literature [9], [13], [17], [18], [20] and [22] related to batch emulsion polymerization, this experimental data could be useful for the production of large scale monodispersed PMMA latex as all of the scale-up and design parameters have been qualitatively addressed.     

Structural and physicochemical properties of the different ultrasound frequency modified Qingke protein

There is a burgeoning demand for modified plant-based proteins with desirable physicochemical and functional properties. The cereal Qingke is a promising alternative protein source, but its use has been limited by its imperfect functional characteristics. To investigate the effect of ultrasound treatment on Qingke protein, we applied single- (40 kHz), dual- (28/40 kHz), and tri- (28/40/50 kHz) frequency ultrasound on the isolated protein and measured subsequent physicochemical and structural changes. The results showed that the physicochemical properties of proteins were modified following ultrasound treatment, and many of these changes significantly increased with increasing frequency. Compared with the native Qingke protein (control), the solubility, foaming activity, stability, and water or oil holding capacity of tri-frequency ultrasound modified Qingke protein increased by 43.54%, 20.83%, 20.51%, 28.9%, and 45.2%, respectively. Furthermore, ultrasound treatment altered the secondary and tertiary structures of the protein resulting in more exposed chromophoric groups and inner hydrophobic groups, as well as reduced β-sheets and increased random coils, relative to the control. Rheological and texture characterization indicated that the values of G' and G'', hardness, gumminess, and chewiness decreased after ultrasound treatment. This study could provide a theoretical basis for the application of multi-frequency ultrasonic technology for modification of Qingke protein to expand its potential use as an alternative protein source.     

Manothermosonication (MTS) treatment by a continuous-flow system: Effects on the degradation kinetics and microstructural characteristics of citrus pectin

Modified pectin (MP) was reported to have increased bioactivities compared with the original one. However, traditional modification methods such as using an acidic solvent with heating are not only costly but causing severe pollution as well. In this study, manothermosonication (MTS) with a continuous-flow system was utilized to modify citrus pectin. The citrus pectin (5 g/L) treated by MTS (3.23 W/mL, 400 kPa, 45 °C) exhibited lower molecular weight (Mw, 248.17 kDa) and PDI (2.76). The pectin treated by MTS (400 KPa, 45 °C, 5 min) exhibited a narrower Mw distribution and lowered more Mw (48.8%) than the ultrasound(US)-treated (23.8%). Pectin degradation data fitted well to kinetic model of 1/Mw_t −1/Mw₀ = kt (45–65 °C). A lower activation energy of 13.33 kJ/mol was observed in the MTS treatment compared with the US-treated (16.38 kJ/mol). The MTS-treated pectin lowered the degree of methoxylation (DM), mol% of rhamnose and galacturonic acid (GalA) while increased mol% of galactose (Gal), xylose (Xyl), and arabinose (Ara). The ¹H and ¹³C nuclear magnetic resonance showed that MTS could not alter the primary structures of citrus pectin. However, an elevated (Gal + Ara)/Rha and reduced GalA/(Rha + Ara + Gal + Xyl) molar ratios after MTS suggested that MTS resulted in more significant degradation on the main chains and less on the side chains of pectin, in agreement with the result of atomic force microscope. Moreover, the MTS-treated pectin exhibited a higher 1,1-diphenyl-2picryl hydrazyl radical scavenging capacity compared with original pectin.     

Improved electrical and interfacial properties of RF-sputtered HfAlOx on n-GaAs with effective Si passivation

In this paper, we present the effects of ultrathin Si interfacial layer on the physical and electrical properties of GaAs MOS capacitors fabricated using RF-sputtered HfAlO_x gate dielectric. It is found that HfAlO_x/Si/n-GaAs stack exhibits excellent electrical properties with low frequency dispersion (∼4.8%), hysteresis voltage (0.27 V) and interface trap density (1.3 × 10¹² eV⁻¹ cm⁻²). The current density of 3.7 × 10⁻⁵ A/cm² is achieved with an equivalent-oxide-thickness of 1.8 nm at V_FB + 1 V for Si-passivated HfAlO_x films on n-GaAs. X-ray photoelectron spectroscopy (XPS) analysis shows that the suppression of low-k interfacial layer formation is accomplished with the introduction of ultrathin Si interface control layer (ICL). Thus the introduction of thin layer of Si between HfAlO_x dielectrics and GaAs substrate is an effective way to improve the interface quality such as low frequency dispersion, hysteresis voltage and leakage current. Additionally, current conduction mechanism has been studied and the dominant conduction mechanisms are found to be Schottky emission at low to medium electric fields and Poole-Frenkel at high fields and high temperatures under substrate injection. In case of gate injection, the main current conduction at low field is found to be the Schottky emission at high temperatures.