Highly Efficient Bifunctional Catalyst of NiCo2O4@NiO@Ni Core/Shell Nanocone Array for Stable Overall Water Splitting

Electrochemical splitting of water is an efficient way to produce clean energy for energy storage and conversion devices. Herein, 3D hierarchical NiCo₂O₄@NiO@Ni core/shell nanocone arrays (NAs) are reported on Ni foam for stable overall water splitting with high efficiency. The architecture and composition of the 3D catalysts are particularly tuned. The outstanding structural and component features of the as‐prepared 3D catalysts are characterized by the vertically grown NiCo₂O₄ nanocone/NiO nanosheet core/shell structure and Ni decorated 3D‐conductive networks, which largely prompt the catalytic performance. The hybrid catalyst with core/shell nanocone array structures exhibits superior bifuncational activities for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with an overpotential of 240 and 120 mV at a current density of 10 mA cm^?2, respectively. The Tafel slope of the optimal 3D electrode is about 43 and 58 mV dec^?1 in an alkaline electrolyte for OER and HER, respectively. An alkaline electrolyzer constructed by two symmetric NiCo₂O₄@NiO@Ni electrodes delivers splendid activity toward overall water splitting with a current of 10 mA cm^?2 at only ≈1.60 V and almost no deactivation after 10 h. This work provides a promising strategy to design ternary core/shell electrodes as high performance Janus catalysts for overall water splitting.     

Ultrathin Fe‐N‐C Nanosheets Coordinated Fe‐Doped CoNi Alloy Nanoparticles for Electrochemical Water Splitting

The development of highly active and cost‐effective catalyst materials toward electrochemical water splitting is of great importance for converting and storing the intermittent solar energy in the form of hydrogen. Herein, for the first time, an ultrathin Fe and N‐co‐doped carbon nanosheet encapsulated Fe‐doped CoNi alloy nanoparticle (FeCoNi@FeNC) composite is obtained and applied as a bifunctional catalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). This catalyst exhibits prominent catalytic performances for both HER and OER, which only requires overpotentials of 102 and 330 mV, respectively, to reach a current density of 10 mA cm^?2 in alkaline media. The high catalytic activity is intrinsically associated with the presence of Fe in both nanosheets and nanoparticles, which has triggered the occurrence of coordinative effects between Fe‐N‐C and FeCoNi that are beneficial for HER and OER, as revealed by electrochemical techniques. In an overall water splitting electrolyzer, FeCoNi@FeNC is employed as both the cathode and anode catalysts, achieving 12 mA cm^?2 at 1.63 V for a duration of more than 12 h.     

A Facile Strategy to Synthesize Cobalt‐Based Self‐Supported Material for Electrocatalytic Water Splitting

Designing and developing active, robust, and noble‐metal‐free catalysts with superior stability for electrocatalytic water splitting is of critical importance but remains a grand challenge. Here, a facile strategy is provided to synthesize a series of Co‐based self‐supported electrode materials by combining electrospinning and chemical vapor deposition (CVD) technologies. The Co, Co₃O₄, Co₉S₈ nanoparticles (NPs) are formed in situ simultaneously with the formation of carbon nanofibers (CNFs) during the CVD process, respectively. The Co‐based NPs are uniformly distributed through the CNFs and they can be directly used as the electrode materials for hydrogen evolution reaction (HER) in acid and oxygen evolution reaction (OER) in alkaline. The Co₉S₈/CNFs membrane exhibits the best HER activity with overpotential of 165 mV at j = 10 mA cm^?2 and Tafel slope of 83 mV dec^?1 and OER activity with overpotential of 230 mV at j = 10 mA cm^?2 and Tafel slope of 72 mV dec^?1. The onion‐like graphitic layers formed around the NPs not only improve the electrical conductivity of the electrode but also prevent the separation of the NPs from the carbon matrix as well as the aggregation.     

Co3O4 Hollow Polyhedrons as Bifunctional Electrocatalysts for Reduction and Evolution Reactions of Oxygen

It is very important to exploit low‐cost and efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts for the development of renewable‐energy conversion and storage techniques. Although much attention has been made to develop efficient catalysts for ORR and OER, it is still highly desired to create new bifunctional catalysts. In this study, Co₃O₄ hollow polyhedrons are synthesized as efficient bifunctional electrocatalysts for ORR and OER by simple one‐step annealing Co‐centered metal–organic frameworks (ZIF‐67). Due to the large specific surface areas and high porosity, the as‐prepared Co₃O₄ hollow polyhedrons exhibit excellent electrocatalytic activities for ORR and OER in alkaline media. Co₃O₄ hollow polyhedrons show higher peak current density (0.61 mA cm^?2) with four‐electron pathway than Co₃O₄ particles (0.39 mA cm^?2), better methanol tolerance and superior durability (82.6%) than commercial Pt/C electrocatalyst (58.6%) for ORR after 25 000 s. In addition, Co₃O₄ hollow polyhedrons also display excellent OER performances with smaller overpotential (536 mV) for 10 mA cm^?2 than Co₃O₄ particles (593 mV) and superior stability (86.5%) after 25 000 s. This facile one‐step strategy based on metal–organic frameworks self‐sacrificed templates can be used to develop the promising well‐defined porous hollow metal oxides electrode materials for energy conversion and storage technologies.     

NiWO3 Nanoparticles Grown on Graphitic Carbon Nitride (g‐C3N4) Supported Toray Carbon as an Efficient Bifunctional Electrocatalyst for Oxygen and Hydrogen Evolution Reactions

Catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are at the heart of water oxidation reactions. Despite continuous efforts, the development of OER/HER electrocatalysts with high activity at low cost remains a big challenge. Herein, a composite material consisting of TC@WO₃@g‐C₃N₄@Ni‐NiO complex matrix as a bifunctional electrocatalyst for the OER and HER is described. Though the catalyst has modest activity for HER, it exhibits high OER activity thereby making it a better nonprecious electrocatalyst for both OER and HER and is further improved by g‐C₃N₄. The catalytic activity arises from the synergetic effects between WO₃, Ni‐NiO, and g‐C₃N₄. A Ni‐NiO alloy and WO₃ nanoparticles decorated on the g‐C₃N₄ surface supported toray carbon (TC) matrix (TC@WO₃@g‐C₃N₄@Ni‐NiO) by a facile route that show an excellent and durable bifunctional catalytic activity for OER and HER in the alkaline medium are developed. This carbon nitride with binary metal/metal‐oxide matrix supported with TC exhibit an overpotential of 0.385 and 0.535 V versus RHE at a current density of 10 mA cm^?2 (Tafel slopes of 0.057 and 0.246 V dec^?1 for OER and HER, respectively), in 0.1 m NaOH . The catalyst is tested in water electrolysis for 17 h.     

铜纳米阵列高效电解水产氧催化剂的制备

本文报道了一种利用简单的两步牺牲模板法,在泡沫铜基底表面完成了三维氧化铜纳米晶阵列的生长. 氧化铜纳米晶阵列具有良好的导电性,稳定性,在碱性溶液中有着优秀的电解水产氧催化性能. 氧化铜纳米晶阵列催化水的电化学氧化只需400 mV的过电势即可达到100 mA/cm²的电流密度,与其它铜基电解水产氧催化剂以及贵金属IrO₂相比都有着明显的优势. 氧化铜纳米晶阵列在270 mA/cm²左右的工作电流下连续工作10 h依然可以保持良好的稳定性,是相同的工作电压下IrO₂工作电流的10倍(约25 mA/cm²).     

A Highly Effective,Stable Oxygen Evolution Catalyst Derived from Transition Metal Selenides and Phosphides

Recently, transition metal chalcogenides and phosphides have been increasingly reported as efficient and stable oxygen evolution reaction (OER) catalysts in alkaline medium, despite the fact that they are thermodynamically unstable under highly oxidative potentials. Here the active forms of these materials are elucidated by synthesizing a hybrid catalyst, which has a metal chalcogenide in the form of CoSe₂ and metal phosphide in the form of CoP—CoSe₂|CoP. Both CoSe₂ and CoP in the as‐prepared catalyst are completely transformed into their respective oxyhydroxides and hydroxides, which are, in fact, the true OER‐active species in alkaline medium and not the selenide and phosphide themselves. The derived oxides from the hybrid catalyst deliver an excellent OER activity by reaching a current density of 10 mA cm⁻² at a low overpotential of 240 mV (vs reversible hydrogen electrode (RHE)) and a Tafel slope of 46.6 mV dec⁻¹. The stability of the derived oxyhydroxide/hydroxide catalyst shows no appreciable deactivation during 120 h of continuous electrolysis, displaying an extraordinary operational stability.     

Three-dimensional flower-like NiS2/MoS2 assembly of randomly oriented nanoplate for enhanced hydrogen evolution reaction

The continually worsening energy crisis has stimulated research into energy conversion technology to produce pure hydrogen, H₂. Transition metal-based compounds have attracted great attention as electrocatalysts for hydrogen evolution reaction (HER) as alternatives to commercial, high-cost, and scarce noble metal-based catalysts. In this work, a 3D flower-like NiS₂/MoS₂ is synthesized with the advantages of a three-dimensional (3D) morphology and the compositing of different metal compounds, thus leading to enhanced electrocatalytic performance. The structure of 3D flower-like NiS₂/MoS₂ augments the specific surface areas resulting from nanoplate assemblies as well as the heterointerface ascribed to two different phases of NiS₂ and MoS₂. These characteristics are confirmed by electrocatalytic measurements of the lower overpotential of 165 mV at 10 mA/cm² with high charge transfer ability, thus demonstrating the structure's potential for advanced electrocatalysts for the HER.     

Composite Nanoarchitectonics with iron nickel bimetallic nanoparticles and carbon composite for efficient electrocatalysis in hydrogen evolution reaction

The poor efficiency and stability of cost-effective metal compounds are major hurdles to substitute expensive metal-based nanomaterials for the hydrogen evolution reaction (HER). As a result, new concepts and tactics for developing electrocatalysts based on earth-abundant elements must be developed. We present iron-nickel alloy nanoparticles that are supported with carbon (FeNi@C) to improve HER performance in alkaline conditions. FeNi particle was supported on Trimesic acid (TMA) based carbon. In particular, the high conductivity of the carbon and a large number of catalytically active sites in the FeNi demonstrated a synergistic effect, making the hybrid structure a good choice for HER catalyst. Moreover, the physicochemical interaction between the carbon and FeNi metal enhanced the electrocatalytic performance and resulted in achieving 10 mA/cm² current density at 190 mV overpotential with 15 h chronopotential cycling, proving the possibility for replacing costly Pt-based catalysts.     

2D siloxene supported NiO/Co3O4 electrocatalyst for the stable and efficient hydrogen evolution reaction

The activity of NiO/Co₃O₄ for the hydrogen evolution reaction (HER) during water splitting was increased by depositing these metal oxides on siloxene multi-sheets. The improvement in active sites due to siloxene was used to increase the catalytic activity. The hierarchical structure of the composite with the synergistic effect of metal oxides helped enhance the catalytic activity to show a low overpotential of 110 mV at 10 mA/cm² in 1 M KOH and stability at 10 mA/cm² over 20 h without an obvious change in voltage. The as-prepared catalyst can be a promising electrocatalyst for the HER owing to the low cost of transition metal oxides, the abundance of silicon on Earth, and the simplicity of the synthesis process.     

Comprehensive facilitating of water oxidation reaction by ultrasonic attenuation of hydrogen-bonded structure of water

The balance between water-metal interactions and water-water hydrogen bonding (HBs) controls the process of water adsorption on metallic surfaces. In other hand, the yield of oxygen evolution reaction (OER) is dependent on the binding energy of H₂O at electrode surface. Therefore, on a specific metal substrate, attenuation of HBs may be a promising route for improving OER. In this study, the computational and experimental evidences indicate that the performance of ultrasonically irradiated deionized water (USI-DW), participated in water oxidation reaction (WOR), is different from its in the intact bulk water. To date, establishing of new electrocatalysts with lower overpotentials (η) and higher current densities (J) in OER have been mostly considered based on metals and oxide materials. Here, we ultrasonically agitated the water clusters formed by strong HBs, and as a sustainable improvement route explored its particular effects on the efficiency of OER. The molecular modeling (MM) of the (H₂O)_n clusters (n = 1–100 molecules), the corresponding IR spectra, the molecular orbitals energy levels and the adsorption of free and cluster confined H₂O molecules on the Pt surface were studied by the appropriate quantum mechanical (QM) methods. The result of deconvolution of FTIR spectra recorded for USI-DW in the –OH stretching region (∼2600–3900 cm⁻¹) properly confirmed the expected increase of the single water molecules. The reduction in overpotentials was 82 ± 8 mV and 158 ± 12 mV, to reach the J of 1 mA cm⁻¹ at the typical pHs 12.2 and 13.1, respectively.     

Does power ultrasound (26 kHz) affect the hydrogen evolution reaction (HER) on Pt polycrystalline electrode in a mild acidic electrolyte?

In this study, we investigated the effects of power ultrasound (26 kHz, up to ∼75 W/cm², up to 100% acoustic amplitude, ultrasonic horn) on the hydrogen evolution reaction (HER) on a platinum (Pt) polycrystalline disc electrode in 0.5 M H₂SO₄ by cyclic and linear sweep voltammetry at 298 K. We also studied the formation of molecular hydrogen (H₂) bubbles on a Pt wire in the absence and presence of power ultrasound using ultra-fast camera imaging. It was found that ultrasound significantly increases currents towards the HER i.e. a ∼250% increase in current density was achieved at maximum ultrasonic power. The potential at a current density of −10 mA/cm² under silent conditions was found to be −46 mV and decreased to −27 mV at 100% acoustic amplitude i.e. a ΔE shift of ∼+20 mV, indicating the influence of ultrasound on improving the HER activity. A nearly 100% increase in the exchange current density (j_o) and a 30% decrease in the Tafel slope (b) at maximum ultrasonic power, was observed in the low overpotential region, although in the high overpotential region, the Tafel slopes (b) were not significantly affected when compared to silent conditions. In our conditions, ultrasound did not greatly affect the “real” surface area (A_r) and roughness factor (R) i.e. the microscopic surface area available for electron transfer. Overall, it was found that ultrasound did not dramatically change the mechanism of HER but instead, increased currents at the Pt surface area through effective hydrogen bubble removal.     

Self-Supported Graphite/Graphene/NiFe-LDH Electrodes for High Performance Oxygen Evolution Reaction

Reducing energy consumption and improving energy utilization efficiency has become the focus of research in the 21^st century. Electrocatalytic water splitting is one of the promising strategies for producing hydrogen energy. In this study, the non-noble nickel-iron layered double hydroxide (NiFe-LDH) catalyst is deposited on the electrochemically intercalated graphite/graphene (G/GE) substrate and directly used as the self-supported and binder-free electrode for electrocatalytic water oxidation. The Ni₂Fe₁-LDH@G/GE catalyst shows a low overpotential of 194 mV at a current density of 10 mA cm^–2, which is better than the noble metal catalyst IrO₂ (314 mV) and RuO₂ (330 mV) and many other related works. This research provides a facile way to directly prepare the catalyst electrode with high performance and low cost.     

调控氧空位实现高比表面积Co3O4纳米片上的产氧反应

Electrochemical water splitting requires efficient water oxidation catalysts to accelerate the sluggish kinetics of water oxidation reaction. Here, we designed an efficient Co₃O₄ electrocatalyst using a pyrolysis strategy for oxygen evolution reaction (OER). Morphological characterization confirmed the ultra-thin structure of nanosheet. Further, the existence of oxygen vacancies was obviously evidenced by the X-ray photoelectron spectroscopy and electron spin resonance spectroscopy. The increased surface area of Co₃O₄ ensures more exposed sites, whereas generated oxygen vacancies on Co₃O₄ surface create more active defects. The two scenarios were beneficial for accelerating the OER across the interface between the anode and electrolyte. As expected, the optimized Co₃O₄ nanosheets can catalyze the OER efficiently with a low overpotential of 310 mV at current density of 10 mA/cm² and remarkable long-term stability in 1.0 mol/L KOH.     

Reduced Graphene Oxide decorated with Manganese Cobalt Oxide as Multifunctional Material for Mechanically Rechargeable and Hybrid Zinc–Air Batteries

Spinel MnCo₂O₄ nanoparticles on nitrogen‐doped reduced graphene oxide (MnCo₂O₄/NGr) are synthesized for advanced zinc–air batteries with remarkable cyclic efficiency and stability. The synthesized MnCo₂O₄/NGr exhibits good oxygen‐reduction reaction (ORR) activity with half‐wave potential E _1/2 of 0.85 V (vs reversible hydrogen electrode (RHE)), comparable to commercial Pt/C with E _1/2 of 0.88 V (vs RHE) along with superior oxygen electrode activity ΔE = 0.91 V for the ORR/OER (oxygen‐evolution reaction) in alkaline media. Durability tests confirm that MnCo₂O₄/NGr is more stable than Pt/C in alkaline environment. MnCo₂O₄/NGr functions with stable discharge profile of 1.2 V at 20 mA cm^?2, large discharge capacity of 707 mAh g^?1_Zn at 40 mA cm^?2 and a high energy density of 813 Wh kg^?1_Zn in a mechanically rechargeable zinc–air battery. The electrically rechargeable MnCo₂O₄/NGr zinc–air battery displays hybrid behavior with both Faradaic and oxygen redox charge–discharge characteristics, operating at higher voltage and providing higher power density and excellent cyclic efficiency of 86% for over 100 cycles compared to Pt/C with efficiency of around 60%. Moreover, hybrid zinc–air battery operates with a stable and energy efficient profile at different current densities.     

Sonoactivated polycrystalline Ni electrodes for alkaline oxygen evolution reaction

The development of cost-effective and active water-splitting electrocatalysts is an essential step toward the realization of sustainable energy. Its success requires an intensive improvement in the kinetics of the anodic half-reaction of the oxygen evolution reaction (OER), which determines the overall system efficiency to a large extent. In this work, we designed a facile and one-route strategy to activate the surface of metallic nickel (Ni) for the OER in alkaline media by ultrasound (24 kHz, 44 W, 60% acoustic amplitude, ultrasonic horn). Sonoactivated Ni showed enhanced OER activity with a much lower potential at + 10 mA cm⁻² of + 1.594 V vs. RHE after 30 min ultrasonic treatment compared to + 1.617 V vs. RHE before ultrasonication. In addition, lower charge transfer resistance of 11.1 Ω was observed for sonoactivated Ni as compared to 98.5 Ω for non-sonoactivated Ni. In our conditions, ultrasound did not greatly affect the electrochemical surface area (A_ecsa) and Tafel slopes however, the enhancement of OER activity can be due to the formation of free OH^• radicals resulting from cavitation bubbles collapsing at the electrode/electrolyte interface.     

Cobalt Based Nanoparticles Embedded Reduced Graphene Oxide Aerogel for Hydrogen Evolution Electrocatalyst

Efficient water electrolysis catalyst is highly demanded for the production of hydrogen as a sustainable energy fuel. It is reported that cobalt derived nanoparticle (CoS₂, CoP, CoS|P) decorated reduced graphene oxide (rGO) composite aerogel catalysts for highly active and reliable hydrogen evolution reaction electrocatalysts. 7 nm level cobalt derived nanoparticles are synthesized over graphene aerogel surfaces with excellent surface coverage and maximal expose of active sites. CoS|P/rGO hybrid aerogel composites show an excellent catalytic activity with overpotential of ≈169 mV at a current density of ≈10 mA cm^?2. Accordingly, efficient charge transfer is attained with Tafel slope of ≈52 mV dec^?1 and a charge transfer resistance (R_ct) of ≈12 Ω. This work suggests a viable route toward ultrasmall, uniform nanoparticles decorated graphene surfaces with well‐controlled chemical compositions, which can be generally useful for various applications commonly requiring large exposure of active surface area as well as robust interparticle charger transfer.     

Study of multi-faceted CoS2 introduced graphene aerogel hybrids via chemical approach for an effective electrocatalytic water splitting

The present article reports the synthesis of hybrid structure along with non-precious cobalt-disulfide. A simple hydrothermal method was used to fabricate multi-faceted CoS₂ introduced graphene aerogels. Studies on electrocatalytic activity showed that the presence of CoS₂ facets along with graphene aerogel played a prominent role in the enhancement of proton reduction to hydrogen gas. The CoS₂/graphene aerogel hybrid sample exhibits extremely low overpotential (160 mV vs. RHE), and high current density for HER in acidic solution. The activity enhancement can be attributed to increasing the active electrochemical surface area of graphene aerogel and faceted particles inside the 3D matrix of graphene. Furthermore, the CoS₂/graphene hybrid retained its high activity even after 1000 cycles of cyclic voltammetry scans, signifying longer stability under acidic condition. The results suggest that CoS₂/graphene aerogel hybrids show their potential application to hydrogen evolution reaction.     

Novel molybdenum disulfide nanosheets–decorated polyaniline: Preparation,characterization and enhanced electrocatalytic activity for hydrogen evolution reaction

Novel molybdenum disulfide nanosheets–decorated polyaniline (MoS₂/PANI) was synthesized and investigated as an efficient catalyst for hydrogen evolution reaction (HER). Compared with MoS₂, MoS₂/PANI nanocomposites exhibited higher catalytic activity and lower Tafel slope for HER in H₂SO₄ solution. The amount of 19 wt% PANI for coupling with MoS₂ resulted in a high current density of 80 mA cm⁻² at 400 mV (vs. RHE). In addition, the optimal MoS₂/PANI nanocomposite showed impressive long-term stability even after 500 cycles. The enhanced catalytic activity of MoS₂/PANI nanocomposites was primarily ascribed to the effective electron transport channels of PANI and the increase of electrochemically accessible surface area in composite materials, which was advantageous to facilitate the charge transfer at catalyst/electrolyte interface.     

Nickel-based electrodes as catalysts for hydrogen evolution reaction in alkaline media

This paper reports a systematical study on the microstructures and electrochemical properties of nickel-based electrodes as low-cost catalysts for hydrogen evolution reaction (HER) in alkaline media. The electrodeposited Ni-Sn alloy displays a hydrogen overpotential of 137 mV at cathodic polarization current of 200 mA cm^?2, which is lower than that of Raney-Ni and nickel net electrodes. The Tafel results show that the Volmer reaction is the rate determining step of HER for nickel net and Raney-Ni, while the hydrogen evolution reaction is controlled by a peculiar model for deposited Ni-Sn alloy. The energy consumption of alkaline water electrolysis could be reduced from 4.63 to 4.26 kW h/m³H₂ by using Ni-Sn alloy electrodes to replace Raney-Ni in electrolyzers, producing good economic and environmental benefits.