低成本溶胶-凝胶法制备SiO2/TiO2双层膜的减反射与自清洁性能

将玻璃基底依次在低成本的SiO₂溶胶和TiO₂溶胶中浸渍后,在500 oC下煅烧制备了同时具备减反射与自清洁性能的SiO₂/TiO₂双层膜．该膜的光学性能与结构特征分别通过紫外-可见分光光度计和场发射扫描电镜进行了表征．同时,源于超亲水性和光催化作用的自清洁性能也凸显出来．实验结果表明制备SiO₂/TiO₂双层膜对光的透射率最高可达到95%,同时具备自清洁性能．     

Morphology and natural wettability properties of sol-gel derived TiO2-SiO2 composite thin films

Previous studies suggest that granular interfaces induce a natural and persistent super-hydrophilicity in TiO₂-SiO₂ composite thin films deposited by sol-gel route. This effect enables to consider self-cleaning applications that do not require a permanent UV exposure, whereas such a permanent exposure is necessary for pure TiO₂ films. In this study, TiO₂-SiO₂ composite thin films have been deposited from a TiO₂ anatase crystalline suspension and different SiO₂ polymeric sols. Wettability studies show that a suitable control of the TiO₂-SiO₂ mixed sol formulations noticeably enhances persistence of the natural super-hydrophilicity in composite films. It is shown that, beside granular interface effects, modifications in the composite film morphologies can noticeably influence wettability properties.     

In situ sonosynthesis of nano TiO2 on cotton fabric

Here, titanium dioxide nanoparticles (NPs) were sonosynthesized and loaded simultaneously onto the cotton fabric. Titanium tetra isopropoxide (TTIP) was used as precursor and ultrasonic irradiation was utilized as a tool for synthesis of TiO₂ in low temperature with anatase structure and loading nanoparticles onto the cotton fabric. TiO₂ loaded cotton fabric was characterized by XRD, FE-SEM, EDS, and XRF. Moreover, several properties of the treated cotton fabrics such as self-cleaning, UV protection, washing durability, and tensile strength were studied. The effect of variables, including TTIP concentration and sonication time, was investigated based on central composite design (CCD) and response surface methodology (RSM). The results confirmed formation of anatase TiO₂ nanoparticles with 3–6 nm crystalline size loaded onto the cotton fabric at low temperature (75 °C) that led to good self-cleaning and UV-protection properties. The excellent UV-protection rating of the treated fabric maintained even after 25 home launderings indicating an excellent washing durability. Interestingly, sonochemical method had no negative influence on the cotton fabric structure. The statistical analysis indicated significant effect of both TTIP concentration and sonication time on the content of the loaded TiO₂ on the fiber and self-cleaning properties of the fabric.     

触发电压对±100 kV多级多通道开关性能的影响

研制了一种用于快脉冲直线型脉冲变压器的±100 kV多级多通道火花开关,研究了触发电压极性、幅值对多级多通道火花开关触发性能的影响,分析了不同触发电压下开关各部分延时及抖动。研究结果表明:触发电压的极性对双极性多级多通道火花开关触发性能影响较小;开关的触发放电延时和抖动随着触发电压的增大而减小。进一步分析了多级多通道火花开关的触发击穿模式以及影响开关击穿延时和抖动的主要因素,提出了减小开关触发击穿延时及抖动的技术途径。     

A simple sonochemical approach for synthesis and characterization of Zn2SiO4 nanostructures

Zn₂SiO₄ nanoparticles have been successfully prepared via a simple sonochemical method, for the first time. The effect of various parameters including ultrasonic power, ultrasonic irradiation time and different surfactants were investigated to reach optimum condition. The as-prepared nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), Fourier transform infrared (FT-IR) spectra and energy dispersive X-ray microanalysis (EDX). The photocatalytic activity of Zn₂SiO₄ nano and bulk structures were compared by degradation of anionic dye methyl orange in aqueous solution under UV-light irradiation. Moreover, the cyclic voltammetry analysis of Zn₂SiO₄ nano and bulk structures were investigated.     

Numerical simulations for sonochemistry

Numerical simulations for sonochemistry are reviewed including single-bubble sonochemistry, influence of ultrasonic frequency and bubble size, acoustic field, and sonochemical synthesis of nanoparticles. The theoretical model of bubble dynamics including the effect of non-equilibrium chemical reactions inside a bubble has been validated from the study of single-bubble sonochemistry. By the numerical simulations, it has been clarified that there is an optimum bubble temperature for the production of oxidants inside an air bubble such as OH radicals and H₂O₂ because at higher temperature oxidants are strongly consumed inside a bubble by oxidizing nitrogen. Unsolved problems are also discussed.     

溶胶-凝胶制备ZnO-SiO2复合膜的量子效应和上转换发光

采用溶胶-凝胶技术在玻璃衬底上制备了ZnO薄膜和ZnO-SiO₂复合膜.原子力显微镜照片显示ZnO薄膜具有球状纳米晶粒;可见光-紫外透射光谱表明ZnO-SiO₂复合膜在可见光区的透过率大约是85%,透过率从330 nm开始下降,到290 nm附近降为零.由于量子效应,吸收边出现明显的蓝移.在室温下用不同波长的光激发ZnO-SiO₂复合膜,光致发光谱显示ZnO-SiO₂复合膜对应于激子发射的290 nm附近的紫外发光峰与透射谱所显示的吸收边位置一致,没有出现斯托克斯红移.同时,ZnO-SiO₂复合膜出现了双光子和三光子吸收现象和上转换发光现象. 关键词： 2')" href="#">ZnO-SiO₂ 量子效应 双光子和三光子吸收 上转换发光     

A Study on the Morphology and Mechanical Properties of PVC/nano‐SiO2 Composites

Three methods were used to modify nano‐SiO₂ particles with various interfaces and interfacial interactions between the particles and Poly(vinyl chloride) (PVC) matrix. The experimental results show that direct surface treatment of nano‐SiO₂ particles with a silane coupling agent (KH‐550) is not effective for improving the mechanical properties of PVC/SiO₂ composites. Both ultrasonic oscillations and high energy vibromilling improve the interfacial interactions between SiO₂ particles and PVC matrix. With these methods, the aggregation of SiO₂ particles was inhibited and a good dispersion of SiO₂ particles in PVC matrix was obtained, which improved the mechanical properties of the PVC/SiO₂ composite. The mechanical properties of the PVC/SiO₂ composite with high energy vibromilling modified SiO₂ particles were remarkably improved. Scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), dynamic mechanical analysis (DMA), and theoretical calculations demonstrate these improvements.     

Sonochemical assisted synthesis of SrFe12O19 nanoparticles

We present the synthesis of M-type strontium hexaferrite by sonochemistry and annealing. The effects of the sonication time and thermal energy on the crystal structure and magnetic properties of the obtained powders are presented. Strontium hexagonal ferrite (SrFe₁₂O₁₉) was successfully prepared by the ultrasonic cavitation (sonochemistry) of a complexed polyol solution of metallic acetates and diethylene glycol. The obtained materials were subsequently annealed at temperatures from 300 to 900 °C. X-ray diffraction analysis shows that the sonochemical process yields an amorphous phase containing Fe³⁺, Fe²⁺ and Sr²⁺ ions. This amorphous phase transforms into an intermediate phase of maghemite (γ-Fe₂O₃) at 300 °C. At 500 °C, the intermediate species is converted to hematite (α-Fe₂O₃) by a topotactic transition. The final product of strontium hexaferrite (SrFe₁₂O₁₉) is generated at 800 °C. The obtained strontium hexaferrite shows a magnetization of 62.3 emu/g, which is consistent with pure hexaferrite obtained by other methods, and a coercivity of 6.25 kOe, which is higher than expected for this hexaferrite. The powder morphology is composed of aggregates of rounded particles with an average particle size of 60 nm.     

Synthesis and characterization of TiO2-coated magnetite clusters (nFe3O4@TiO2) as anode materials for Li-ion batteries

TiO₂-coated magnetite clusters (nFe₃O₄@TiO₂) were facilely prepared through the sol–gel reaction between Ti alkoxides (TEOT) and magnetite clusters (nFe₃O₄) with terminated alkoxy groups. The composite particles represented a core–shell nanostructure (nFe₃O₄@TiO₂) consisting of a Fe₃O₄ cluster core and a TiO₂ capsule layer. The capsule layer of nFe₃O₄@TiO₂ was increased with increasing amounts of TEOT (150, 300, 500 μl) in sol–gel reaction. The Fe₃O₄@TiO₂ (150 μl of TEOT) with a thin TiO₂ layer (ca. 10 nm) exhibited two kinds of cathodic (0.79 V and 1.61 V) and anodic (1.78 and 2.1 V) peaks attributed to the reduction and oxidation process by Fe₃O₄ core and TiO₂ layer, respectively. The thin nFe₃O₄@TiO₂ (150 μl of TEOT) exhibited the enhanced capacity retention by ca. 40% probably due to the buffering effect of TiO₂ capsule layer. However, the thick nFe₃O₄@TiO₂ (300–500 μl of TEOT) exhibited a rapid capacity fading due to the disintegrated core–shell nanostructure, i.e., unfavorable hetero-junction between TiO₂ matrix and magnetite clusters.     

Surface Plasmon Resonance of Au Nanoparticles Fabricated by Negative Ion Implantation and Grid Structure toward Plasmonic Applications

Optical properties of Au nanoparticle composites and a grid structure of Cu nanoparticle composite were studied. Negative ion implantation was applied to synthesize Au and Cu nanoparticles in amorphous SiO₂ and Al₂O₃. Au nanoparticles were embedded within a depth of 30 nm by 60keV Au⁻ implantation. The surface plasmon resonance (SPR) of Au:SiO₂ and Au: Al₂O₃ composites shifted to red and to blue, respectively, compared to calculated ones by the Mie theory. Optical nonlinearity was measured with pump-probe femtosecond spectroscopy and the transient spectrum of Au: Al₂O₃ composite presented a large red shift from the SPR peak. Image mapping of far-field transmitted intensity of Cu-implanted SiO₂ with a fine grid structure drawn by laser-lithography was observed by a scanning near-field optical microscopy (SNOM) system.     

Electron-phonon interaction in non-polar quantum dots induced by the amorphous polar environment

We propose a Fröhlich-type electron-phonon interaction mechanism for carriers confined in a non-polar quantum dot surrounded by an amorphous polar environment. Carrier transitions under this mechanism are due to their interaction with the oscillating electric field induced by the local vibrations in the surrounding amorphous medium. We estimate the corresponding energy relaxation rate for electrons in Si nanocrystals embedded in a SiO₂ matrix as an example. When the nanocrystal diameter is larger than 4 nm then the gaps between the electron energy levels of size quantization are narrow enough to allow for transitions accompanied by emission of a single local phonon having the energy about 140 meV. In such Si/SiO₂ nanocrystals the relaxation time is in nanosecond range.     

Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

Structural studies of nanocrystalline oxides

We report the results of structural studies of samples of nanocrystalline tin oxide, zirconia, magnesia, alumina and silica, prepared by sol–gel techniques (including the addition of silica to restrict grain growth) and high-energy ball milling. XRD, EXAFS/XANES and MAS-NMR analyses were used to characterise the materials. EXAFS showed that nanocrystals of ZrO₂ and SnO₂ prepared by sol–gel methods are highly crystalline, consistent with previous EXAFS studies of sol–gel prepared nanocrystalline oxides [A.V. Chadwick, M.J. Pooley, K.E. Rammutla, S.L.P. Savin, A. Rougier, J. Phys.: Condens. Matter, 15 (2003) 431.; A.V. Chadwick, G.E. Rush, in Nanocrystalline Metals and Oxides: Selected Properties and Applications, (Kluwer, New York), (2002), p.133.]. In contrast, the sol–gel prepared SiO₂ appeared amorphous, even after prolonged heating at 1200 °C. The EXAFS of the ball-milled samples showed clearly attenuated signals that cannot be attributed solely to particle size. Ball milling of quartz crystals (which have a simple Q₄) first broadens the NMR line and then generates Q₃ and then Q₂ lines indicating the generation of amorphous materials in the samples.     

反应溅射VN/SiO2纳米多层膜的微结构与力学性能

采用V和SiO₂靶通过反应溅射方法制备了一系列具有不同SiO₂和VN调制层厚的VN/SiO₂纳米多层膜. 利用X射线衍射、X射线能量色散谱、高分辨电子显微镜和微力学探针表征了多层膜的微结构和力学性能. 结果表明：在Ar，N₂混和气体中，射频反应溅射的SiO₂薄膜不会渗氮. 单层膜时以非晶态存在的SiO₂，当其厚度小于1nm时，在多层膜中因VN晶体层的模板效应被强制晶化，并与VN层形成共格外延生长. 相应地，多层膜的硬度得到明显提高，最高硬度达34GPa. 随SiO₂层厚度的进一步增加，SiO₂层逐渐转变为非晶态，破坏了与VN层的共格外延生长结构，多层膜硬度也随之降低. VN调制层的改变对多层膜的生长结构和力学性能也有影响，但并不明显. 关键词： 2纳米多层膜')" href="#">VN/SiO₂纳米多层膜 共格外延生长 非晶晶化 超硬效应     

Specific heat of glasses at low temperatures

A model for lattice vibrations of glass is proposed which successfully explains the anomalous specific heat of amorphous SiO₂ at low temperatures. Experimental results for three different forms of amorphous SiO₂ are compared with the calculated values.     

Microwave electromagnetic property of SiO2-coated carbonyl iron particles with higher oxidation resistance

Flake carbonyl iron (CI) particles and amorphous silica were used to fabricate SiO₂-coated CI particles through the Stober process. The as-prepared SiO₂-coated CI particles were annealed at 500 °C for 1 h under argon and air atmosphere. The XRD results showed that only a little amount of oxides were formed when the SiO₂-coated CI particles were annealed under the air atmosphere. The magnetic properties of the SiO₂-coated CI particles before and after annealing treatment showed little change, indicating that amorphous silica appears to be very effective in reducing oxidation of the CI particles. The reflection loss exceeding −10 dB can be obtained in the frequency range of 9.9-14.6 GHz and a minimum value can be reached to −21.5 dB at 12.2 GHz for the annealed SiO₂-coated CI particles with the composite thickness being 1.5 mm. The mechanism of annealing treatment influence on the electromagnetic properties and microwave absorption of the SiO₂-coated CI particles was also discussed.     

Sonochemical preparation of polyaniline@TiO2 and polyaniline@SiO2 for the removal of anionic and cationic dyes

Polyaniline (PANI) synthesized by simple CDs (carbon dots) initiated polymerization has formed a composite with TiO₂ and SiO₂, respectively via a sonochemical method. These PANI@TiO₂ and PANI@SiO₂ composites were proven as effective adsorbent materials to rapidly adsorb the anionic and cationic dyes from wastewater at neutral pH and ambient temperature. Selected popular cationic and anionic organic dyes consisted of methylene blue (MB), brilliant blue (BB), Evans blue (EB), crystal violet (CV), Congo red (CR), rhodamine B (RB), and rhodamine 6G (R6G). The adsorption equilibria were governed by Langmuir and Freundlich isotherms. The kinetic results revealed that the PANI@TiO₂ and PANI@SiO₂ composite materials synthesized via the sonochemical method are efficient adsorbents compared to other adsorbent materials for the removal of organic dyes from the water. The adsorbed dyes were effectively desorbed from the composites, rendering the reusability of PANI@TiO₂ and PANI@SiO₂. The estimated adsorption capacities of PANI@TiO₂ and PANI@SiO₂ composites were 89, 93, 80, 94 and 74, 71, 61, 61 mg/g for MB, CR, CV, and R6G, respectively.     

Ultrasound-assisted fast encapsulation of metal microparticles in SiO2 via an interface-confined sol-gel method

Although the traditional Stoˇber process-based methods are widely used for encapsulation of metal nanoparticles in SiO₂, these time-consuming methods are not effective for coating metal microparticles with a uniform SiO₂ layer of desired thickness. Herein, an ultrasound-assisted, interface-confined sol–gel method is proposed for fast encapsulation of metal microparticles in SiO₂, and the encapsulation of Sn microparticles is chosen as an example to illustrate its feasibility. The proposed method involves covering metal microparticles with liquid films that contain water, alcohol, surfactant (Span-80) and catalyst (NH₄F) and then ultrasonically dispersing these particles into cyclohexane, where tetraethylorthosilicate (TEOS) is added. To ensure the hydrolysis-condensation reactions of TEOS occurring at the particle-cyclohexane interface so that the formed SiO₂ is coated on the particles, the microparticles should be well dispersed into cyclohexane with the liquid films being not broken away from their surfaces. It is found that the assistance of probe sonication and the addition of surfactant are crucial to achievement of a good dispersion of metal microparticles in cyclohexane. And using high-viscosity alcohol (namely glycerol), controlling the volume ratio of water to alcohol and the amount of water, and choosing a suitable ultrasonic power are essential for preventing the formation of free SiO₂ (namely SiO₂ that is not coated on the particles), which is a result that the liquid films escape from the particle surfaces under ultrasonic cavitation. Our results have also revealed that the thickness of SiO₂ layer can be adjusted by changing the reaction time or the total amount of water. In particular, the thickness of SiO₂ layer can be easily raised by simply repeating the encapsulation procedure. Compared with the traditional Stoˇber process-based methods, the proposed method is time-saving (reaction time: about 30 min vs. more than 12 h) and extremely effective for coating microparticles with a continuous, uniform SiO₂ layer of desired thickness.     

Mechanisms of effective gold shell on Fe3O4 core nanoparticles formation using sonochemistry method

Sonochemical synthesis (sonochemistry) is one of the most effective techniques of breaking down large clusters of nanoparticles (NPs) into smaller clusters or even individual NPs, which ensures their dispersibility (stability) in a solution over a long duration. This paper demonstrates the potential of sonochemistry becoming a valuable tool for the deposition of gold (Au) shell on iron oxide nanoparticles (Fe₃O₄ NPs) by explaining the underlying complex processes that control the deposition mechanism. This review summarizes the principles of the sonochemistry method and highlights the resulting phenomenon of acoustic cavitation and its associated physical, chemical and thermal effects. The effect of sonochemistry on the deposition of Au NPs on the Fe₃O₄ surface of various sizes is presented and discussed. A Vibra-Cell ultrasonic solid horn with tip size, frequency, power output of ½ inch, 20 kHz and 750 W respectively was used in core@shell synthesis. The sonochemical process was shown to affect the surface and structure of Fe₃O₄ NPs via acoustic cavitation, which prevents the agglomeration of clusters in a solution, resulting in a more stable dispersion. Deciphering the mechanism that governs the formation of Au shell on Fe₃O₄ core NPs has emphasized the potential of sonication in enhancing the chemical activity in solutions.