Ultrasound mediation for one-pot sonosynthesis and deposition of magnetite nanoparticles on cotton/polyester fabric as a novel magnetic,photocatalytic, sonocatalytic,antibacterial and antifungal textile

A magnetic cotton/polyester fabric with photocatalytic, sonocatalytic, antibacterial and antifungal activities was successfully prepared through in-situ sonosynthesis method under ultrasound irradiation. The process involved the oxidation of Fe²⁺ to Fe³⁺ via hydroxyl radicals generated through bubbles collapse in ultrasonic bath. The treated samples were analyzed by X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometry. Photocatalytic and sonocatalytic activities of magnetite treated fabrics were also evaluated toward Reactive Blue 2 decoloration under sunlight and ultrasound irradiation. Central composite design based on response surface methodology was applied to study the influence of iron precursor, pH and surfactant concentration to obtain appropriate amount for the best magnetism. Findings suggested the potential of one-pot sonochemical method to synthesize and fabricate Fe₃O₄ nanoparticles on cotton/polyester fabric possessing appropriate saturation magnetization, 95% antibacterial efficiency against Staphylococcus aureus and 99% antifungal effect against Candida albicans, 87% and 70% dye photocatalytic and sonocatalytic decoloration along with enhanced mechanical properties using only one iron rich precursor at low temperature.     

Preparation and characterization of bifunctional, Fe3O4/ZnO nanocomposites and their use as photocatalysts

Bifunctional magnetic-optical Fe₃O₄/ZnO nanocomposites with different molar ratio were successfully synthesized by a facile two-step strategy. Compared with the other methods, it was found to be mild, inexpensive, green, convenient and efficient. Fe₃O₄ nanocrystal was used as seed for the deposit and growth of ZnO nanoparticle. A series of the characterizations manifested that the combination of Fe₃O₄ with ZnO nanoparticles was successful. Photocatalytic activity studies confirmed that as-prepared nanocomposites had excellent photodegradating behavior to Methyl Orange (MO) compared to the pure ZnO nanoparticles. The results showed that the degradation percentage of MO was about 93.6% for 1 h when the amount of catalyst was 0.51 g L⁻¹ and initial concentration of MO was 6 × 10⁻⁵ mol L⁻¹ in the pH 7 solution. Moreover, the kinetics of photocatalytic degradation reaction could be expressed by the first-order reaction kinetic model. Furthermore, the Fe₃O₄/ZnO nanocomposites could be also served as convenient recyclable photocatalysts because of their magnetic properties.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Sonochemical fabrication of Fe3O4 nanoparticles on reduced graphene oxide for biosensors

This study synthesized Fe₃O₄ nanoparticles of 30–40 nm by a sonochemical method, and these particles were uniformly dispersed on the reduced graphene oxide sheets (Fe₃O₄/RGO). The superparamagnetic property of Fe₃O₄/RGO was evidenced from a saturated magnetization of 30 emu/g tested by a sample-vibrating magnetometer. Based on the testing results, we proposed a mechanism of ultrasonic waves to explain the formation and dispersion of Fe₃O₄ nanoparticles on RGO. A biosensor was fabricated by modifying a glassy carbon electrode with the combination of Fe₃O₄/RGO and hemoglobin. The biosensor showed an excellent electrocatalytic reduction toward H₂O₂ at a wide, linear range from 4 × 10^?6 to 1 × 10^?3 M (R² = 0.994) as examined by amperometry, and with a detection limit of 2 × 10^?6 M. The high performance of H₂O₂ detection is attributed to the synergistic effect of the combination of Fe₃O₄ nanoparticles and RGO, promoting the electron transfer between the peroxide and electrode surface.     

Preparation and photocatalytic properties of magnetically reusable Fe3O4@ZnO core/shell nanoparticles

Fe₃O₄@ZnO binary nanoparticles were synthesized by a simple two-step chemical method and characterized using various analytical instruments. TEM result proved the binary nanoparticles have core/shell structures and average particle size is 60 nm. Photocatalytic investigation of Fe₃O₄@ZnO core/shell nanoparticles was carried out using rhodamine B (RhB) solution under UV light. Fe₃O₄@ZnO core/shell nanoparticles showed enhanced photocatalytic performance in comparison with the as prepared ZnO nanoparticles. The enhanced photocatalytic activity for Fe₃O₄@ZnO might be resulting from the higher concentration of surface oxygen vacancies and the suppressing effect of the Fe³⁺ ions on the recombination of photoinduced electron–hole pairs. Magnetization saturation value (5.96 emu/g) of Fe₃O₄@ZnO core/shell nanoparticles is high enough to be magnetically removed by applying a magnetic field. The core/shell photocatalyst can be easily separated by using a commercial magnet and almost no decrease in photocatalytic efficiency was observed even after recycling six times.     

Synthesis of magnetic core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–Au nanoparticle for biomolecule immobilization and detection

The production of monodispersed magnetic nanoparticles with appropriate surface modification has attracted increasing attention in biomedical applications including drug delivery, separation, and purification of biomolecules from the matrices. In the present study, we report rapid and room temperature reaction synthesis of gold-coated iron nanoparticles in aqueous solution using the borohydride reduction of HAuCl₄ under sonication for the first time. The resulting nanoparticles were characterized with transmission electron microscopy (TEM), electron spectroscopy for chemical analysis (ESCA), ultraviolet visible spectroscopy (UV–Vis), and X-ray diffraction (XRD). Surface charges and magnetic properties of the nanoparticles were also examined. The pattern of Fe₃O₄ nanoparticles is face centered cubic with an average diameter of 9.5 nm and the initial reduction of gold on the surface of Fe₃O₄ particles exhibits uniform Fe₃O₄–Au nanoparticles with an average diameter of 12.5 nm. The saturation magnetization values for the uncoated and gold-coated Fe₃O₄ nanoparticles were found to be 30 and 4.5 emu/g, respectively, at 300 K. The progression of binding events between boronic acid terminated ligand shell and fructose based on the covalent bonding interaction was measured by absorbance spectral changes. Immunomagnetic separation was also performed at different E. coli concentration to evaluate capturing efficiency of resulting nanoparticles. Immunomagnetic separation percentages were varied in a range of 52.1 and 21.9% depend on the initial bacteria counts.     

Exchange bias behavior of monodisperse Fe3O4/γ-Fe2O3 core/shell nanoparticles

We have carried out systematic studies on well-characterized monodisperse Fe₃O₄/γ-Fe₂O₃ core/shell nanoparticles of 2-30 nm having a very narrow size distribution and possessing a uniquely mono-layer of surface γ-Fe₂O₃. This unique core-shell structure, probably having a disordered magnetic surface state, leads us to three key observations of unusual magnetic properties: i) a very large magnetic exchange anisotropy reaching over 7 × 10⁶ erg/cm³ for the smaller particles, ii) exchange bias behavior in the magnetization data of the core/shell Fe₃O₄/γ-Fe₂O₃ nanoparticles, and iii) the temperature dependence of the coercive field following an unusual exponential behavior.     

Fabrication of magnetic gold nanorod particles for immunomagnetic separation and SERS application

The preparation and application of rod-shaped core–shell structured Fe₃O₄–Au nanoparticles for immunomagnetic separation and sensing were described for the first time with this study. To synthesize magnetic gold nanorod particles, the seed-mediated synthetic method was carried out and the resulting nanoparticles were characterized with transmission electron microscopy (TEM), ultraviolet visible spectroscopy (UV–Vis), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). Magnetic properties of the nanoparticles were also examined. Characterization of the magnetic gold nanorod particles has proven that the resulting nanoparticles were composed of Fe₃O₄ core and the gold shell. The rod-shaped gold-coated iron nanoparticles have an average diameter of 16 ± 2 nm and an average length of about 50 ± 5 nm (corresponding aspect ratio of 3). The saturation magnetization value for the magnetic gold nanorod particles was found to be 37 emu/g at 300 K. Rapid and room temperature reaction synthesis of magnetic gold nanorod particles and subsequent surface modification with E. coli antibodies provide immunomagnetic separation and SERS application. The analytical performance of the SERS-based homogenous sandwich immunoassay system with respect to linear range, detection limit, and response time is also presented.     

Control synthesis of magnetic Fe3O4–chitosan nanoparticles under UV irradiation in aqueous system

Novel magnetic Fe₃O₄–chitosan nanoparticles were synthesized via photochemical method in an emulsifier-free aqueous system at room temperature for the first time. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that the Fe₃O₄–chitosan nanoparticles were in regular shape with a mean diameter of 41 nm, whereas the average size in aqueous solution measured by photocorrelation spectroscopy (PCS) was 64 nm, which indicated that the nanoparticles had water-swelling properties. X-ray diffraction (XRD) patterns indicated that the Fe₃O₄ nanoparticles were pure Fe₃O₄ with a spinel structure, and the irradiation under UV light did not result in a phase change. The Fe₃O₄–chitosan nanoparticles were also characterized by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). Magnetic measurement revealed that the saturated magnetization (Ms) of the Fe₃O₄–chitosan nanoparticles reached 48.6 emu/g and the nanoparticles showed the characteristics of superparamagnetism. The stability test showed these novel nanoparticles had high magnetic stability. The PCS and TGA results indicated that the size and chitosan content of Fe₃O₄–chitosan nanoparticles formed was pH- and chitosan/Fe₃O₄ ratio-dependent, which could be used to synthesize magnetic Fe₃O₄–chitosan nanoparticles with different size to meet the requirements of different applications.     

CuFe2O4 magnetic heterogeneous nanocatalyst: Low power sonochemical-coprecipitation preparation and applications in synthesis of 4H-chromene-3-carbonitrile scaffolds

The paper presents the synthesis and catalytic activity of CuFe₂O₄ nanoparticles. The CuFe₂O₄ nanoparticles have been prepared by sonochemical route under low power ultrasonic irradiation (UI) and using silent stirring at room temperature only (ST) along with co-precipitation method, without using any additive/capping agent. The synthesized magnetic nanoparticles were successfully used and compared for the synthesis of 4H-chromene-3-carbonitrile derivatives. The CuFe₂O₄ nanoparticles obtained by sonochemical route exhibit higher catalytic activity because of small size (0.5–5 nm), high surface area (214.55 m²/g), high thermal stability up to 700 °C, recyclability and reusability due to its magnetic characteristics than CuFe₂O₄ nanoparticles obtained by room temperature silent stirring. The synthesized CuFe₂O₄ nanoparticles were characterized by FT-IR, SEM–EDX, HR-TEM, XRD, TGA/DTA/DTG, BET, VSM techniques. The present method is of great interest due to its salient features such as environmentally compatible, efficient, short reaction time, chemoselectivity, high yield, cheap, moisture insensitive, green and recyclable catalyst which make it sustainable protocol.     

Ultrasonic-assisted magnetic solid phase extraction of morphine in urine samples by new imprinted polymer-supported on MWCNT-Fe3O4-NPs: Central composite design optimization

Multiwalled carbon nanotubes (MWCNTs) were magnetized with Fe₃O₄ nanoparticles (MWCNTs-Fe₃O₄-NPs) and subsequently coated by vinyl end groups (Vinyltrimethoxysilane). MWCNT-Fe₃O₄-NPs were used as support for a new morphine (MO) molecularly imprinted polymer (MWCNT-Fe₃O₄-NPs@MO-MIP) by surface imprinting polymerization method. The MWCNT-Fe₃O₄-NPs@MO-MIP was characterized by FTIR, VSM and SEM techniques and successfully used for determination of MO. Ultrasonic-assisted magnetic solid phase extraction followed by UV–vis spectrophotometer (UAMSPE-UV–vis) was investigated for MWCNT-Fe₃O₄-NPs@MO-MIP and compared with non-imprinted polymer (NIP) using batch method. Central composite design under response surface methodology was used for the evaluation of the effect of variables, individually, as well as their possible interaction effects on the adsorption process. The variables such as sonication time, MWCNT-Fe₃O₄-NPs@MO-MIP mass, initial concentration of MO and pH were investigated in this study. At optimum experimental conditions, UAMSPE-UV–vis method was exhibited a linear range of 0.8–8.7 mg L⁻¹ of the MO concentration with a detection limit of 0.18 mg L⁻¹. The relative standard deviation for the analyte was found to be lower than 2.32%. The MWCNT-Fe₃O₄-NPs@MO-MIP adsorption capacity was found to be 37.01 mg g⁻¹. The enrichment and preconcentration factors were found to be 107.01 and 98.21, respectively. The developed method was finally applied successfully to the determination of MO in urine and wastewater samples with the recoveries ranged from 96.40 to 105.6%.     

Fe3O4@MIL-100(Fe) modified ZnS nanoparticles with enhanced sonocatalytic degradation of tetracycline antibiotic in water

Sonocatalysis has attracted excellent research attention to eradicate hazardous pollutants from the environment effectively. This work synthesised an organic/inorganic hybrid composite catalyst by coupling Fe₃O₄@MIL-100(Fe) (FM) with ZnS nanoparticles using the solvothermal evaporation method. Remarkably, the composite material delivered significantly enhanced sonocatalytic efficiency for removing tetracycline (TC) antibiotics in the presence of H₂O₂ compared to bare ZnS nanoparticles. By adjusting different parameters such as TC concentration, catalyst dosage and H₂O₂ amount, the optimized composite (20 %Fe₃O₄@MIL-100(Fe)/ZnS) removed 78.25% antibiotic in 20 min at the cost of 1 mL of H₂O₂. These much superior activities are attributed to the efficient interface contact, effective charge transfer, accelerated transport capabilities and strong redox potential for the superior acoustic catalytic performance of FM/ZnS composite systems. Based on various characterization, free radical capture experiments and energy band structures, we proposed a mechanism for the sonocatalytic degradation of tetracycline based on S-scheme heterojunctions and Fenton like reactions. This work will provide an important reference for developing ZnS-based nanomaterials to study sonodegradation of pollutants.     

Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)

Fe₃O₄ nanoparticles and thin films were prepared on the Au(1 1 1) surface and characterized using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Fe₃O₄ was formed by annealing α-Fe₂O₃(0 0 0 1) structures on Au(1 1 1) at 750 K in ultrahigh vacuum (UHV) for 60 min. Transformation of the α-Fe₂O₃(0 0 0 1) structures into Fe₃O₄ nanoparticles and thin films was supported by XPS. STM images show that during the growth procedure used, Fe₃O₄ initially appears as nanoparticles at low coverages, and forms thin films at ～2 monolayer equivalents (MLE) of iron. Two types of ordered superstructures were observed on the Fe₃O₄ particles with periodicities of ～50 and ～42 Å, respectively. As the Fe₃O₄ particles form more continuous films, the ～50 Å feature was the predominant superstructure observed. The Fe₃O₄ structures at all coverages show a hexagonal unit cell with a ～3 Å periodicity in the atomically resolved STM images.     

Superparamagnetic silica nanoparticles with immobilized metal affinity ligands for protein adsorption

Superparamagnetic silica-coated magnetite (Fe₃O₄) nanoparticles with immobilized metal affinity ligands were prepared for protein adsorption. First, magnetite nanoparticles were synthesized by co-precipitating Fe²⁺ and Fe³⁺ in an ammonia solution. Then silica was coated on the Fe₃O₄ nanoparticles using a sol–gel method to obtain magnetic silica nanoparticles. The condensation product of 3-Glycidoxypropyltrimethoxysilane (GLYMO) and iminodiacetic acid (IDA) was immobilized on them and after charged with Cu²⁺, the magnetic silica nanoparticles with immobilized Cu²⁺ were applied for the adsorption of bovine serum albumin (BSA). Scanning electron micrograph showed that the magnetic silica nanoparticles with an average size of 190 nm were well dispersed without aggregation. X-ray diffraction showed the spinel structure for the magnetite particles coated with silica. Magnetic measurement revealed the magnetic silica nanoparticles were superparamagnetic and the saturation magnetization was about 15.0 emu/g. Protein adsorption results showed that the nanoparticles had high adsorption capacity for BSA (73 mg/g) and low nonspecific adsorption. The regeneration of these nanoparticles was also studied.     

Synthesis and characterization of “mulberry”-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/multiwalled carbon nanotube nanocomposites

Nanocomposites composed of multi-wall carbon nanotubes (MWNTs) and Fe₃O₄ nanoparticles were fabricated using solvothermal method. Transmission and scanning electron microscopy, energy dispersive spectroscopy, and X-ray powder diffraction measurements confirmed that these mulberry-like Fe₃O₄ microparticles which were combined with the MWNTs in a random pattern are constructed with tiny nanocrystallites (12 nm in average diameter). The magnetic properties of the Fe₃O₄/MWNTs nanocomposites were measured using a vibrating sample magnetometer. Results showed that the Fe₃O₄/MWNTs nanocomposites exhibited superparamagnetism at room temperature and possessed a lower saturation magnetization (around 27.6 emu/g) than that of the pure Fe₃O₄ nanoparticles (around 33.7 emu/g). The Fe₃O₄/MWNTs nanocomposites have potential applications in engineering and medicine.     

Domain state–dependent magnetic formation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles analyzed via magnetic resonance

Magnetic properties, arising from surface exchange and interparticle interactions of the Fe₃O₄ (magnetite) nanoparticles, were investigated in the temperature range of 5–300 and 120–300 K using vibrating sample magnetometer technique and electron spin resonance spectroscopy, respectively. The research was based on to figure out the origin of intraparticle interactions and the change of interparticle interactions in wide size range Fe₃O₄ nanoparticles. The analyses were done for samples having almost same particle size distributions. The average particle sizes were changed in between 30 ± 2 and 34 ± 2 nm. The observed magnetization values were demonstrated the mixture of single-domain size particles, exhibiting both single-domain (SD) and superparamagnetic (SPM) states. The symmetry of resonance curves changed according to the ratio of SD and SPM-stated particles in mixture under located temperature. The changes of anisotropy up to domain state were understood by freezing magnetic moment in glycerol matrix from room temperature to 120 K under 5-kG field. The shift of H _R values to higher magnetic fields and the more symmetric resonance spectrum proved the effect of anisotropy and interparticle interactions fields on magnetic behave. In addition, the origin of intra-interaction was exposed from Fe³⁺ centers and exchange coupling in between Fe²⁺, Fe³⁺, and O⁻, and Fe³⁺ centers found from g factor (g).     

Sono-enhanced degradation of dye pollutants with the use of H2O2 activated by Fe3O4 magnetic nanoparticles as peroxidase mimetic

Sono-enhanced degradation of a dye pollutant Rhodamine B (RhB) was investigated by using H₂O₂ as a green oxidant and Fe₃O₄ magnetic nanoparticles (MNPs) as a peroxidase mimetic. It was found that Fe₃O₄ MNPs could catalyze the break of H₂O₂ to remove RhB in a wide pH range from 3.0 to 9.0 and its peroxidase-like activity was significantly enhanced by the ultrasound irradiation. At pH 5.0 and temperature 55 °C, the ultrasound-assisted H₂O₂–Fe₃O₄ catalysis removed about 95% of RhB (0.02 mmol L⁻¹) in 15 min with a apparent rate constant of 0.15 min⁻¹ for the degradation of RhB, being 6.5 and 37.6 folds of that in the simple catalytic H₂O₂–Fe₃O₄ system, and the simple ultrasonic US-H₂O₂ systems, respectively. The beneficial synergistic behavior between Fe₃O₄ catalysis and ultrasonic was demonstrated to be dependent on Fe₃O₄ dosage, H₂O₂ concentration, pH value and temperature. As a tentative explanation, the observed significant synergistic effects was attributed to the positive interaction between cavitation effect accelerating the catalytic breakdown of H₂O₂ over Fe₃O₄ nanoparticles, and the function of Fe₃O₄ MNPs providing more nucleation sites for the cavitation inception.     

Application of citrate-stabilized gold-coated ferric oxide composite nanoparticles for biological separations

Gold-coated magnetic nanoparticles were synthesized with size ranging from 15 to 40 nm using sodium citrates as the reducing agent. Oxidized magnetites (Fe₃O₄) fabricated by co-precipitation of Fe²⁺ and Fe³⁺ in strong alkaline solution were used as magnetic cores. The structures of gold (Au) shell and magnetic core (Au–Fe) were studied by transmission electron microscopy (TEM) image and energy dispersive spectroscopy (EDS) spectrum. Results from high-resolution X-ray diffraction (HR XRD) show that the Au–Fe oxide nanoparticles have a face-centered cubic shape with the crystalline faces of {1 1 1}. The Au-coated magnetic nanoparticles exhibited a surface plasmon resonance peak at 528 nm. The nanoparticles are well dispersed in distilled water. A 3000 G permanent magnet was successfully used for the separation of the functionalized nanoparticles. Magnetic properties of the nanoparticles were determined by magnetic force microscope (MFM) in nanometric resolution and vibrating sample magnetometer (VSM). Magnetic separation of biological molecules using Au-coated magnetic oxide composite nanoparticles was examined after attachment of protein immunoglobulin G (IgG) through electrostatic interactions. Using this method, separation was achieved with a maximum yield of 35% at an IgG concentration of 400 ng/ml.     

A novel approach to preparing magnetic protein microspheres with core-shell structure

Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe₃O₄ cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe₃O₄ nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail.