Ultrasound stimulated production of a fibrinolytic enzyme

The present study is aimed at enhanced production of a fibrinolytic enzyme from Bacillus sphaericus MTCC 3672 under ultrasonic stimulation. Various process parameters viz; irradiation at different growth phases, ultrasonication power, irradiation duration, duty cycle and multiple irradiation were studied for enhancement of fibrinolytic enzyme productivity. The optimum conditions were found as follows, irradiation of ultrasonic waves to fermentation broth at 12 h of growth phase with 25 kHz frequency, 160 W ultrasound power, 20% duty cycle for 5 min. The productivity of fibrinolytic enzyme was increased 1.82-fold from 110 to 201 U/mL compared with the non sonicated control fermentation. Drop in glucose concentration from 0.41% to 0.12% w/v in ultrasonicated batch implies that, ultrasonication increases the cell permeability, improves substrate intake and progresses metabolism of microbial cell. Microscopic images before and after ultrasonic stimulation clearly signifies the impact of duty cycle on decreasing biomass concentration. However, environmental scanning electron micrograph does not show any cell lysis at optimum ultrasonic irradiation. Offshoots of our results will contribute to fulfill the demand of enhancement of microbial therapeutic enzyme productivity, through ultrasonication stimulation.     

Lactobacillus plantarum-derived biosurfactant: Ultrasound-induced production and characterization

The aim of the present study was to investigate the effect of ultrasonic treatment (25 kHz) on biosurfactant production by Lactobacillus plantarum ATCC 8014. The impacts of the ultrasonication (with a frequency of 25 kHz and power of 7.4 W for 30 min time duration) were examined at different stages of the fermentation process to obtain the optimum stimulation instant(s). The optimum scenario was found to be one-time sonication at the 12^th hour of fermentation which can be beneficial from an economic point of view (compared with multiple applications of sonication). Ultrasonic treatment at this time resulted in enhancement of the productivities of biomass (4.5 g/L) and biosurfactant (2.01 g/L) which was almost 1.3 times higher than those of the non-sonicated control samples. According to our results, it was clearly observed that glucose consumption increased after ultrasonic treatment representing the improved substrate uptake and progression of the cellular metabolism. Furthermore, the transmission electron microscopic images immediately after sonication clarified the pore formation on the cell surfaces. The results also indicated the enhancement of plasma membrane permeability of the sonicated cells. Fourier transform infrared spectroscopy and scanning electron microscopy coupled with energy dispersive x-ray spectroscopy analyses also disclosed respectively no structural differences before and after ultrasonic exposure in the produced biosurfactant and bacterial cell membrane. The biosurfactant was characterized to be a mixture of carbohydrate (28%), protein (23%) and lipid (specified by gas chromatography-mass spectrometry) known as glycolipoprotein. The sustainable critical micelle concentration and the stability of the synthesized biosurfactant can feature its potential applicability in various processes in the food and pharmaceutical industries.     

Studies to control biofilm formation by coupling ultrasonication of natural waters and anodization of titanium

The main objective of this study was to investigate the combined effect of ultrasonication of natural waters and anodization of titanium on microbial density and biofilm formation tendency on titanium surfaces. Application of 24 kHz, 400 W high power ultrasound through a 14 mm horn type SS (stainless steel) Sonicator with medium amplitude of 60% for 30 min brought about three order decrease in total bacterial density of laboratory tap water, cooling tower water and reservoir water and two order decrease in seawater. Studies on the effect of ultrasonication on dilute pure cultures of Gram-negative and Gram-positive bacteria showed five order and three order decrease for Pseudomonas sp. and Flavobacterium sp. respectively and two order and less than one order decrease for Bacillus sp. and Micrococcus sp. respectively. Ultrasonication increased lag phase and reduced logarithmic population increase and specific growth rate of Gram-negative bacteria whereas for Gram-positive bacteria specific growth rate increased. Studies on the biofilm formation tendency of these ultrasonicated mediums on titanium surface showed one order reduction under all conditions. Detailed biofilm imaging by advanced microscopic techniques like AFM, SEM and epifluorescence microscopy clearly visualized the lysed/damaged cells and membrane perforations due to ultrasonication. Combination of ultrasonication and anodization brought about maximum decrease in bacterial density and biofilm formation with greater than two order decrease in seawater, two order decrease in Bacillus sp. culture and more than four order decrease in Flavobacterium sp. culture establishing the synergistic effect of anodization and ultrasonication in this study.     

Effect of ultrasound on different quality parameters of apple juice

Fresh apple juice treated with ultrasound (for 0, 30, 60 and 90 min, at 20 °C, 25 kHz frequency) was evaluated for different physico-chemical, Hunter color values, cloud value, antioxidant capacity, scavenging activity on 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical, ascorbic acid, total phenolics, flavonoids, flavonols and microbial characteristics. No significant effect of sonication was observed on pH, total soluble solids (°Brix) and titratable acidity of apple juice. Sonication significantly improved ascorbic acid, cloud value, phenolic compounds, antioxidant capacity, DPPH free radical scavenging activity and differences in Hunter color values. Moreover, significant reduction in microbial population was observed. Findings of the present study suggested that sonication treatment could improve the quality of apple juice. It may successfully be employed for the processing of apple juice with improved quality and safety from consumer’s health point of view.     

Sonication enhances polyphenolic compounds,sugars, carotenoids and mineral elements of apple juice

A study was initiated with the objective of evaluating the effects of sonication treatment on quality characteristics of apple juice such as polyphenolic compounds (chlorogenic acid, caffeic acid, catechin, epicatechin and phloridzin), sugars (fructose, glucose and sucrose), mineral elements (Na, K, Ca, P, Mg, Cu and Zn), total carotenoids, total anthocyanins, viscosity and electrical conductivity. The fresh apple juice samples were sonicated for 0, 30 and 60 min at 20 °C (frequency 25 kHz and amplitude 70%), respectively. As results, the contents of polyphenolic compounds and sugars significantly increased (P < 0.05) but the increases were more pronounced in juice samples sonicated for 30 min whereas, total carotenoids, mineral elements (Na, K and Ca) and viscosity significantly increased (P < 0.05) in samples treated for 60 min sonication. Losses of some mineral elements (P, Mg and Cu) also occurred. Total anthocyanins, Zn and electrical conductivity did not undergo any change in the sonicated samples. Findings of the present study suggest that sonication technique may be applied to improve phytonutrients present naturally in apple juice.     

Study of continuous flow ultrasonication to improve total phenolic content and antioxidant activity in sorghum flour and its comparison with batch ultrasonication

Ultrasonic technology was applied to release the phenolics bound with starch and protein matrix in order to enhance total phenolic content (TPC) and antioxidant activity (AA) of the sorghum flour. Both the continuous flow and batch ultrasonication were implied with independent variables such as flour to water ratio (FWR), ultrasonication intensity (UI), and ultrasonication time (UT) with an additional variable as flow rate (FR) in continuous flow ultrasonication. All the process variables showed a significant effect on the corresponding ultrasonication process. The optimal conditions for the continuous flow ultrasonication were a FWR of 10% w/v, an UI of 20 W/cm², an UT of 130 s, and 15 ml/s FR which produced a maximum values of 70.9 mg GAE/100 g dry matter (d.m.) for TPC and 143.9 µmol TE/100 g d.m. for AA. Regarding the batch ultrasonication, the maximum values were 65.6 mg GAE/100 g d.m. and 141.0 µmol TE/100 g d.m. for TPC and AA, respectively at optimum conditions of 10% w/v FWR, 30 W/cm² UI, and 200 s UT. When comparing with the batch ultrasonication, the continuous flow process saved 35% time and 33% of energy consumption to obtain comparatively higher TPC and AA of the sorghum flour. Ultrasonication improved free phenolic acid content by releasing bound phenolics in the sorghum flour. Impact of various process parameters on specific energy was analyzed during both the processes, and influence of energy on TPC and AA of the sorghum flour was also observed for the batch and continuous flow ultrasonication.     

High-intensity ultrasonication impact on the chlorothalonil fungicide and its reduction pathway in spinach juice

Among different novel technologies, sonochemistry is a sustainable emerging technology for food processing, preservation, and pesticide removal. The study aimed to probe the impact of high-intensity ultrasonication on chlorothalonil fungicide degradation, reduction pathway, and bioactive availability of spinach juice. The chlorothalonil fungicide-immersed spinach juice was treated with sonication at 360 W, 480 W, and 600 W, 40 kHz, for 30 and 40 min at 30 ± 1 °C. The highest reduction of chlorothalonil fungicide residues was observed at 40 min sonication at 600 W. HPLC-MS (high-performance liquid chromatography-mass spectroscopy) analysis revealed the degradation pathway of chlorothalonil and the formation of m-phthalonitrile, 3-cyno-2,4,5,6-tetrachlorobenamide, 4-dichloroisophthalonitrile, trichloroisophtalonitrile, 4-hydoxychlorothalonil, and 2,3,4,6-tetrachlorochlorobenzonitrile as degradation products. High-intensity sonication treatments also significantly increased the bioavailability of phenolic, chlorophyll, and anthocyanins and the antioxidant activity of spinach juice. Our results proposed that sonication technology has excellent potential in degrading pesticides through free radical reactions formation and pyrolysis. Considering future perspectives, ultrasonication could be employed industrially to reduce pesticide residues from agricultural products and enhance the quality of spinach juice.     

Resistant starch type 2 from lotus stem: Ultrasonic effect on physical and nutraceutical properties

Resistant starch type 2 (RS) was isolated from lotus stem using enzymatic digestion method. The isolated RS was subjected to ultrasonication (US) at different sonication power (100–400 W). The US treated and untreated RS samples were characterized using dynamic light scattering (DLS), scanning electron microscopy (SEM), light microscopy and Fourier transform infrared spectroscopy (FT-IR). DLS revealed that particle size of RS decreased from 12.80 µm to 413.19 nm and zeta potential increased from −12.34 mV to −26.09 mV with the increase in sonication power. SEM revealed smaller, disintegrated and irregular shaped RS particles after ultrasonication. FT-IR showed the decreased the band intensity at 995 cm⁻¹ and 1047 cm⁻¹ signifying that US treatment decreased the crystallinity of RS and increased its amorphous character. The bile acid binding, anti-oxidant and pancreatic lipase inhibition activity of samples also increased significantly (p < 0.05) with the increase in sonication power. Increase in US power however increased the values of hydrolysis from 23.11 ± 1.09 to 36.06 ± 0.13% and gylcemic index from 52.39 ± 0.38 to 59.50 ± 0.11. Overall, the non-thermal process of ultrasonic treatment can be used to change the structural, morphological and nutraceutical profile of lotus stem resistant starch which can have great food and pharamaceutical applications.     

Effects of ultrasound-assisted chitosan grafted caffeic acid coating on the quality and microbial composition of pompano during ice storage

The effects of ultrasound-assisted chitosan grafted caffeic acid coating on the quality and microbial composition of fresh pompano (Trachinotus ovatus) fillets during ice storage for 24 days were evaluated. Samples were treated by distilled water (CK), ultrasound (US), chitosan grafted caffeic acid coating (G), and chitosan grafted caffeic acid coating with ultrasound-assisted (USG). Results showed that samples treated with USG could inhibit the formation of corrupt substances such as TVB-N, TBA, biogenic amines (BAs), hypoxanthine (Hx), and hypoxanthine riboside (HxR) when compared to the CK group. The results of high-throughput sequencing technology observed that the major bacteria genus of fresh samples was Acinetobacter. The diversity of bacterial communities at the initial stage was more diverse than that at the end of stage. With the extension of storage time, the USG treatment could maintain the microbial diversity. The dominant microbiota was Shewanella and Brochothrix in the CK group after 24 days of storage. In addition, Brochothrix in treated groups was effectively decreased. The microbial communities of samples in all treatments were changed during storage. At the end of storage, there was a significant difference in bacterial composition between the CK and treated samples, indicating that the treatment can effectively inhibit the growth of microorganisms, especially spoilage microorganisms, and reduce the quality deterioration caused by bacteria.     

Sustainable emerging sonication processing: Impact on fungicide reduction and the overall quality characteristics of tomato juice

Sonication is an emerging sustainable and eco-friendly technology that has been broadly explored in food processing and preservation. Sonication has the edges of low energy consumption and high efficiency than conventional decontamination methods and would not pass on secondary pollutants. In the current research, we analyzed the impact of sonication on anilazine fungicide reduction, bioactive compound, antioxidant activity, colloidal stability, and enzymatic and microbial load of tomato juice. Sonicated treatments were carried out at 40 kHz, 480 W, 30 ± 2 °C for 0, 8, 16, 24, 32, and 40 min in an ultrasonic bath cleaner. The GC–MS outcomes revealed that the anilazine maximum reduction in tomato juice attained 80.52 % at 40 min of sonication. The anilazine concentration reduced significantly (p ≤ 0.05) with increased sonication time. In contrast, sonication treatments have acquired the highest TFC, TPC, ascorbic acid, carotenoids, lycopene, ABTS, and ORAC assay than the untreated sample. The Sonication process significantly improved (p ≤ 0.05) colloidal stability by reducing particle size distribution, apparent viscosity, and sedimentation index. Sonication prolonged tomato juice's shelf life by reducing the total viable count from 6.31 to 1.91 log CFU/mL. Polygalacturonase and pectin methyl esterase of the sonication sample at 40 min were inactivated by 44.32 % and 64.2 %, respectively. Considering this issue from a future perspective, sonication processing can be used industrially to enhance fruit juice's nutritional properties and shelf life and reduce pesticides and other organic residues.     

Green ultrasound-assisted extraction of chlorogenic acids from sweet potato peels and sonochemical hydrolysis of caffeoylquinic acids derivatives

Sweet potato peels are rich in chlorogenic acids. In this work, we applied ultrasound technology to extract the main compounds from sweet potato peel and used multivariate analysis and principal component analysis (PCA) to evaluate the effects of different extraction conditions on the extraction of chlorogenic acids. The extraction was studied varying ultrasonic power density (20, 35 and 50 W/L) and processing time (5, 10, 20 and 40 min) using an ultrasonic bath operating at 25 kHz. The chemical analysis was carried out by UPLC-qTOF-MS, and the results were evaluated by PCA and PLS-DA chemometric analysis. Results show that both ultrasonic power density and processing time influences in the extraction of different chlorogenic acid, and that different extraction conditions can be used to selectively extract specific caffeoylquinic acids and feruloylquinic acids in higher amounts. Ultrasound promoted the hydrolysis of tricaffeoylquinic acid when subjected to ultrasonic waves (20–50 W/L), and of 3,4-caffeyolquinic acid at high ultrasonic power density (50 W/L).     

Ultrasound-assisted conversion of tannic acid to gallic acid as a strategy to obtain value-added products

In this work, ultrasound was applied for the conversion of tannic acid into gallic acid using only diluted H₂O₂ as reagent. Experiments were carried out using several types of ultrasonic horns operating at 20 kHz (VC750W processor). The following experimental conditions were evaluated: H₂O₂ concentration (0.2 to 8.5 mol L⁻¹), horn type (10 to 25 mm of diameter), ultrasound amplitude (20 to 70%), sonication time (10 to 45 min), tannic acid concentration (170 to 1360 mg L⁻¹), and reaction temperature (50 to 90 °C). Gallic acid production was monitored with ultra-performance liquid chromatography with high-resolution time-of-flight mass spectrometry (UPLC-ToF-MS). The isolated gallic acid was confirmed with nuclear magnetic resonance (¹H and ¹³C NMR). It is important to emphasize that this study was developed as a proof of concept to demonstrate the potential of ultrasound for tannic acid conversion into gallic acid using just diluted H₂O₂. Under selected conditions gallic acid production yield was 128 ± 4 mg g⁻¹ of initial tannic acid (using 170 mg L⁻¹ of tannic acid as starting material). Reaction time was set as 30 min, which was carried out using 1 mol L⁻¹ H₂O₂ and ultrasound amplitude of 50% at 90 °C. At silent conditions (mechanical stirring, from 100 to 1000 rpm), gallic acid production was halved (less than 78 ± 4 mg g⁻¹ of initial tannic acid).     

Sequential phenolic acid co-pigmentation pretreatment and contact ultrasound-assisted air drying to intensify blackberry drying and enhance anthocyanin retention: A study on mass transfer and phenolic distribution

In this work, the spraying of ethanol solution containing phenolic acid (ferulic acid or caffeic acid) was performed before subjecting to contact ultrasound-assisted air drying of blackberry. The mass transfer modeling results revealed that sonication intensified both internal water diffusion and external water exchange during drying, and ethanol pretreatment enhanced the effective diffusivity of water. Compared with air drying alone, the drying time for sequential ferulic acid pretreatment and drying with sonication was shortened by 89.2%. Owing to the co-pigmentation between phenolic acid and anthocyanins, the retention of anthocyanins was significantly enhanced after dehydration. At the end of drying, the total anthocyanin contents in the ultrasound-dried samples pretreated with ferulic acid and caffeic acid were 25.3% and 10.5% higher than the sonicated samples without pretreatments, respectively. Furthermore, drying simultaneously with sonication promoted the preservation of non-anthocyaninic soluble phenolics including catechin, phloretic acid, rutin in blackberry compared to air drying alone. Besides, bound phenolics in blackberry were less influences by the applied dehydration treatments. This study demonstrates that the combination of phenolic acid co-pigmentation pretreatment and ultrasound drying could be a promising method to protect anthocyanin pigments during dehydration of berry fruits.     

Effect of high intensity ultrasound on the fermentation profile of Lactobacillus sakei in a meat model system

The objective of this study was to investigate the efficacy of high intensity ultrasound on the fermentation profile of Lactobacillus sakei in a meat model system. Ultrasound power level (0–68.5 W) and sonication time (0–9 min) at 20 °C were assessed against the growth of L. sakei using a Microplate reader over a period of 24 h. The L. sakei growth data showed a good fit with the Gompertz model (R² > 0.90; SE < 0.042). Second order polynomial models demonstrated the effect of ultrasonic power and sonication time on the specific growth rate (SGR, μ, h⁻¹) and lag phase (λ, h). A higher SGR and a shorter lag phase were observed at low power (2.99 W for 5 min) compared to control. Conversely, a decrease (p < 0.05) in SGR with an increase in lag phase was observed with an increase in ultrasonic power level. Cell-free extracts obtained after 24 h fermentation of ultrasound treated samples showed antimicrobial activity against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Salmonella typhimurium at lower concentrations compared to control. No significant difference (p < 0.05) among treatments was observed for lactic acid content after a 24 h fermentation period. This study showed that both stimulation and retardation of L. sakei is possible, depending on the ultrasonic power and sonication time employed. Hence, fermentation process involving probiotics to develop functional food products can be tailored by selection of ultrasound processing parameters.     

Application of ultrasound in grape mash treatment in juice processing

Recently, application of ultrasound has attracted considerable interest as an alternative approach to traditional methods. In this study, response surface methodology (RSM) was used to optimize the conditions for grape mash treatment by ultrasound and by combination of ultrasound and enzyme. The results indicated that optimal conditions were the temperature of 74 °C and the time of 13 min for sonication treatment; and were the enzyme concentration of 0.05% and the time of 10 min for combined ultrasound and enzyme treatment. In comparison with traditionally enzymatic treatment, sonication treatment increased extraction yield 3.4% and shortened treatment time over three times; combined ultrasound and enzyme treatment increased extraction yield slightly, only 2%, but shortened treatment time over four times. After sonication treatment, enzymatic treatment increased extraction yield 7.3% and total treatment time of this method was still shorter than that of traditionally enzymatic treatment method. Besides, application of ultrasound improved the grape juice quality because it increased contents of sugars, total acids and phenolics as well as color density of grape juice.     

Fabrication of ultrasound-mediated tunable graphene oxide nanoscrolls

In this work, a cost-effective and facile method was adopted for the fabrication of graphene oxide nanoscrolls (GONS) by low frequency (20 kHz) ultrasonication with tunable dimensions. The graphene oxide (GO) was synthesized by modified Hummer’s method using synthetic graphite as a base material. Later, GO suspension (0.05 g L⁻¹) were made using methanol as solvent and subjected to different ultrasonication conditions. It was found that GO sheets curls themselves into nanoscrolls by overcoming the energy barrier for scrolling with the help of bubble cavitation energy provided by ultrasonication. Also, the effect of ultrasonication power (100–150 W) for irradiation time (0.5–3 h) over the GONS dimensions were investigated. The spiral wounded GONS structures were shown using electron microscopy. Raman Spectroscopy, Thin-film X-Ray Diffraction, Energy Dispersive X-Ray, FT Infrared Spectroscopic analysis were also done to endorse GONS formation. Factors affecting GONS formation such as sonication power and solvent selection were studied as scrolling of GO sheets are strongly dependent on sonication parameters and solvent characteristics. It was found that GONS length varies inversely with irradiation time for identical power density. Also, a solvent with relatively large Hansen solubility parameter, lower dipole movement and less negative value of zeta potential support GONS formation of longer length. Raman analysis overlays the rapid oxygen-defect site cleavage mechanism. The obtained GONS unlocks further developments in various engineering applications like adsorption, drug delivery and filtration membrane.     

Synergistic effect of probe sonication and ionic liquid for extraction of phenolic acids from oak galls

Phenolic acids of oak gall were extracted using ultrasonic-probe assisted extraction (UPAE) method in the presence of ionic liquid. It was compared with classical ultrasonic-bath assisted extraction (CUBAE) and conventional aqueous extraction (CAE) method, with and without the presence of ionic liquid. Remarkably, the UPAE method yielded two-fold higher extraction yield with the presence of ionic liquid, resulting 481.04 mg/g for gallic acids (GA) and 2287.90 mg/g for tannic acids (TA), while a decreased value of 130.36 mg/g for GA and 1556.26 mg/g for TA were resulted with the absence of ionic liquid. Intensification process resulted the highest yield of 497.34 mg/g and 2430.48 mg/g for GA and TA, respectively, extracted at temperature 50 °C with sonication intensity of 8.66 W/cm² and 10% duty cycle, diluted in ionic liquid, 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [Bmim][Tf₂N] at concentration of 0.10 M with sample-to-solvent ratio 1:10 for 8 h. Peleg’s model successfully predicted the UPAE process confirming that extraction capacity is the controlling factor in extracting phenolic acids. Hence, it can be concluded that UPAE method and ionic liquid have synergistic effect as it effectively enhanced the extraction efficiency to increase the bioactive constituents yield.     

Thermosonication as a potential quality enhancement technique of apple juice

Enzymatic browning and microbial growth lead to quality losses in apple products. In the present study, fresh apple juice was thermosonicated using ultrasound in-bath (25 kHz, 30 min, 0.06 W cm⁻³) and ultrasound with-probe sonicator (20 kHz, 5 and 10 min, 0.30 W cm⁻³) at 20, 40 and 60 °C for inactivation of enzymes (polyphenolase, peroxidase and pectinmethylesterase) and microflora (total plate count, yeast and mold). Additionally, ascorbic acid, total phenolics, flavonoids, flavonols, pH, titratable acidity, ^°Brix and color values influenced by thermosonication were investigated. The highest inactivation of enzymes was obtained in ultrasound with-probe at 60 °C for 10 min, and the microbial population was completely inactivated at 60 °C. The retention of ascorbic acid, total phenolics, flavonoids and flavonols were significantly higher in ultrasound with-probe than ultrasound in-bath at 60 °C. These results indicated the usefulness of thermosonication for apple juice processing at low temperature, for enhanced inactivation of enzymes and microorganisms.     

Development and validation of an efficient ultrasound assisted extraction of phenolic compounds from flax (Linum usitatissimum L.) seeds

Flaxseed accumulates in its seedcoat a macromolecular complex composed of lignan (secoisolariciresinol diglucoside, SDG), flavonol (herbacetin diglucoside, HDG) and hydroxycinnamic acids (p-couramic, caffeic and ferulic acid glucosides). Their antioxidant and/or cancer chemopreventive properties support their interest in human health and therefore, the demand for their extraction. In the present study, ultrasound-assisted extraction (UAE) of flaxseed phenolic compounds was investigated. Scanning Electron Microscopy imaging and histochemical analysis revealed the deep alteration of the seedcoat ultrastructure and the release of the mucilage following ultrasound treatment. Therefore, this method was found to be very efficient for the reduction of mucilage entrapment of flaxseed phenolics. The optimal conditions for UAE phenolic compounds extraction from flaxseeds were found to be: water as solvent supplemented with 0.2 N of sodium hydroxide for alkaline hydrolysis of the SDG–HMG complex, an extraction time of 60 min at a temperature of 25 °C and an ultrasound frequency of 30 kHz. Under these optimized and validated conditions, highest yields of SDG, HDG and hydroxycinnamic acid glucosides were detected in comparison to other published methods. Therefore, the procedure presented herein is a valuable method for efficient extraction and quantification of the main flaxseed phenolics. Moreover, this UAE is of particular interest within the context of green chemistry in terms of reducing energy consumption and valuation of flaxseed cakes as by-products resulting from the production of flax oil.     

Effect of combined ultrasonic and enzymatic extraction technique on the quality of noni (Morinda citrifolia L.) juice

In order to obtain noni juice with high yield and good quality, the effect of combined extraction technique of enzymatic treatment (EZ) and ultrasonication (US) on the overall quality of noni juice was investigated. Moreover, the extraction performance of the EZ-US combined extraction technique was compared with that of EZ-based extraction and the US-based extraction. Response surface methodology (RSM) was designed to optimize the parameters of ultrasonic treatment, by taking consideration of the extraction efficiency, quality parameters and bioactive ingredients of noni juice. The results indicated that combined ultrasonic and enzymatic treatment achieved a synergistic effect on promoting the quality of noni juice. The maximum juice yield of 67.95 % was obtained under ultrasonication for 10 min at 600 W after enzymatic treatment (EZU). In addition, EZU-treated juice exhibited the highest contents of total phenolic and flavonoid, which were 148.19 ± 2.53 mg gallic acid/100 mL and 47.19 ± 1.22 mg rutin/100 mL, respectively, thus contributing to better antioxidant activity. Moreover, the EZU treatment significantly reduced the particle size of noni juice, and improved its suspension stability and rheological properties. FTIR results indicated that the treatments did not bring major changes in the chemical structure and the functional groups of compounds in noni juice. Therefore, EZU treatment can be successfully applied to the extraction of noni juice with better nutritional properties and overall quality.