Ultrasound-assisted synthesis of magnesium hydroxide nanoparticles from magnesium

Acoustic cavitation in water provides special kinetic and thermodynamic conditions for chemical synthesis and nanostructuring of solids. Using cavitation phenomenon, we obtained magnesium hydroxide from pure magnesium. This approach allows magnesium hydroxide to be synthesized without the requirement of any additives and non-aqueous solvents. Variation of sonochemical parameters enabled a total transformation of the metal to nanosized brucite with distinct morphology. Special attention is given to the obtaining of platelet-shaped, nanometric and de-agglomerated powders. The products of the synthesis were characterized by transmission electron microscopy (TEM), electron diffraction (ED), scanning electron microscopy (SEM) and X-ray diffraction (XRD).     

Polystyrene/magnesium hydroxide nanocomposite particles prepared by surface-initiated in-situ polymerization

In order to avoid their agglomeration and incompatibility with hydrophobic polystyrene substrate, magnesium hydroxide nanoparticles were encapsulated by surface-initiated in-situ polymerization of styrene. The process contained two steps: electrostatic adsorption of initiator and polymerization of monomer on the surface of magnesium hydroxide. It was found that high adsorption ratio in the electrostatic adsorption of initiator could be attained only in acidic region, and the adsorption belonged to typical physical process. Compared to traditional in-situ polymerization, higher grafting ratio was obtained in surface-initiated in-situ polymerization, which can be attributed to weaker steric hindrance. Both Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) indicated that polystyrene/magnesium hydroxide nanocomposite particles had been successfully prepared by surface-initiated in-situ polymerization. The resulting samples were also analyzed and characterized by means of contact angle testing, dispersibility evaluation and thermogravimetric analysis.     

Syntheses and characterization of Mg(OH)2 and MgO nanostructures by ultrasonic method

Magnesium hydroxide nanostructures have been synthesized by the reaction of magnesium acetate with sodium hydroxide via sonochemical method. Reaction conditions such as the Mg²⁺ concentration, aging time and the ultrasonic device power show important roles in the size, morphology and growth process of the final products. The magnesium oxide nanoparticles have been prepared by calcination of magnesium hydroxide nanostructures at 400 °C. The magnesium hydroxide and magnesium oxide nanostructures were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), thermal gravimetric (TG) and differential thermal analyses (DTA).     

Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate) via one-pot in situ polymerization

Hydrophobic magnesium aluminum hydroxide composite particles (PMMA-MAH) were obtained by means of grafting poly(methyl methacrylate) (PMMA) onto the surface of magnesium aluminum hydroxide(MAH) nanoparticles after a novel type of phosphate coupling agent (DN-27) modification. The introduction of functional double bonds was firstly conducted on the surface of nanoparticles by DN-27 modification, followed by one-pot in situ polymerization on the particles surface using methyl methacrylate (MMA) as monomer, azoisobutyronitrile (AIBN) as initiator and sodium dodecyl sulfate (SDS) as stabilizer to graft PMMA on the surface of DN-27-modified MAH particles. The obtained composite particles were characterized by field-emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray powder diffraction (XRD). The results show that the organic macromolecule PMMA could be successfully grafted on the surface of DN-27-modified MAH nanoparticles and the thermal stability of the PMMA-MAH composite particles had been improved. Compared with unmodified blank MAH sample, the product obtained with this method possesses better hydrophobic properties such as a higher water contact angle of 108° and a well dispersion.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

The role of ultrasound in hydrogen removal and microstructure refinement by ultrasonic argon degassing process

In this work, the role of ultrasound in hydrogen removal and microstructure refinement by the ultrasonic argon degassing has been fully investigated by the experimental work in water and AZ91-0.4Ca magnesium melt, respectively. Ultrasound is able to break up argon gas into numbers of small bubbles and drive them diving deeply to the bottom of water, which are responsible for the efficient degassing regime of ultrasonic argon process. The argon flowrate plays a dominant role in promoting hydrogen removal effect. Meanwhile, the increasing argon flowrate can suppress the microstructure refinement, due to the subdued ultrasonic cavitation under a large argon flowrate. Mechanical properties of AZ91-0.4Ca alloy can be much promoted by the ultrasonic argon degassing process. Ultrasound is the key to achieve not only efficient degassing regime, but also microstructure refinement as well as mechanical properties promotion.     

超声清洗装置空化噪声谱分析法空化噪声级测量

空化强度是用以衡量液体介质中空化活动的剧烈程度,同时空化效应在超声清洗中起关键作用,因此,测量超声清洗槽中的空化强度便可了解其中空化活动的情况.当发生空化时,液体介质中会产生成分复杂空化噪声,对空化噪声谱进行分析和计算得到空化噪声级,据此可判断空化强度.实验测得结果表明:超声清洗装置内稳态空化分布广泛、均匀,瞬态空化分...     

Surface treatment of magnesium hydroxide to improve its dispersion in organic phase by the ultrasonic technique

Micron magnesium hydroxide [Mg(OH)₂] was modified by means of ultrasonic method with stearic acid (SA) as modifier in water. The Fourier transform infrared spectroscopy (FT-IR) and element analysis showed all SA was bonded upon the surface of the Mg(OH)₂ forming a coating layer and no free SA was detected after the modifying process. The thickness of coating SA on the Mg(OH)₂ was determined by X-ray photoelectron spectroscopy (XPS). Compared with the unmodified Mg(OH)₂, the modified Mg(OH)₂ had better dispersion property in xylene, slower sedimentation velocity of dilute suspension in xylene and lower viscosity of suspension in paraffin liquid. The results showed that the modified Mg(OH)₂ could be dispersed much better than the unmodified Mg(OH)₂ in organic phase.     

Study of ultrasonic cavitation during extraction of the peanut oil at varying frequencies

The ultrasonic extraction of oils is a typical physical processing technology. The extraction process was monitored from the standpoint of the oil quality and efficiency of oil extraction. In this study, the ultrasonic cavitation fields were measured by polyvinylidene fluoride (PVDF) sensor. Waveform of ultrasonic cavitation fields was gained and analyzed. The extraction yield and oxidation properties were compared. The relationship between the fields and cavitation oxidation was established. Numerical calculation of oscillation cycle was done for the cavitation bubbles. Results showed that the resonance frequency, f_r, of the oil extraction was 40 kHz. At f_r, the voltage amplitude was the highest; the time was the shortest as reaching the amplitude of the waveform. Accordingly, the cavitation effect worked most rapidly, resulting in the strongest cavitation intensity. The extraction yield and oxidation properties were closely related to the cavitation effect. It controlled the cavitation oxidation effectively from the viewpoint of chemical and physical aspects.     

Physical and chemical effects of acoustic cavitation in selected ultrasonic cleaning applications

Acoustic cavitation in a liquid medium generates several physical and chemical effects. The oscillation and collapse of cavitation bubbles, driven at low ultrasonic frequencies (e.g., 20 kHz), can generate strong shear forces, microjets, microstreaming and shockwaves. Such strong physical forces have been used in cleaning and flux improvement of ultrafiltration processes. These physical effects have also been shown to deactivate pathogens. The efficiency of deactivation of pathogens is not only dependent on ultrasonic experimental parameters, but also on the properties of the pathogens themselves. Bacteria with thick shell wall are found to be resistant to ultrasonic deactivation process. Some evidence does suggest that the chemical effects (radicals) of acoustic cavitation are also effective in deactivating pathogens. Another aspect of cleaning, namely, purification of water contaminated with organic and inorganic pollutants, has also been discussed in detail. Strong oxidising agents produced within acoustic cavitation bubbles could be used to degrade organic pollutants and convert toxic inorganic pollutants to less harmful substances. The effect of ultrasonic frequency and surface activity of solutes on the sonochemical degradation efficiency has also been discussed in this overview.     

Corrosion resistant properties of polyaniline-acrylic coating on magnesium alloy

The performance of the paint coating based on acrylic-polyaniline on magnesium alloy ZM 21 has been studied by electrochemical impedance spectroscopy in 0.5% NaCl solution. The polyaniline was prepared by chemical oxidative method of aniline with ammonium persulphate in phosphoric acid medium. The phosphate-doped polyaniline was characterized by FTIR and XRD methods. Acrylic paint containing the phosphate-doped polyaniline was prepared and coated on magnesium ZM 21 alloy. The coating was able to protect the magnesium alloy and no base metal dissolution was noted even after 75 days exposure to sodium chloride solution.     

The efficiency of ultrasonic oscillations transfer into the load

The results of ultrasonic action to the substances have been presented. It is examined, the correlation between the electrical parameters of ultrasonic equipment and acoustic performances of the ultrasonic field in treating the medium, the efficiency of ultrasonic technological facility, and the peculiarities of oscillations introduced into the load under cavitation development. The correlation between the acoustic powers of oscillations securing the needed level of cavitation and desired technological effect, and the electrical parameters of the ultrasonic facility, first of all, the power, is established. The peculiarities of cavitation development in liquids with different physical-chemical properties (including the molten low-melting metals) have been studied, and the acoustic power of oscillations introduced into the load under input variation of electric power to the generator has been also estimated.     

Monitoring of transient cavitation induced by ultrasound and intense pulsed light in presence of gold nanoparticles

One of the most important challenges in medical treatment is invention of a minimally invasive approach in order to induce lethal damages to cancer cells. Application of high intensity focused ultrasound can be beneficial to achieve this goal via the cavitation process. Existence of the particles and vapor in a liquid decreases the ultrasonic intensity threshold required for cavitation onset. In this study, synergism of intense pulsed light (IPL) and gold nanoparticles (GNPs) has been investigated as a means of providing nucleation sites for acoustic cavitation. Several approaches have been reported with the aim of cavitation monitoring. We conducted the experiments on the basis of sonochemiluminescence (SCL) and chemical dosimetric methods. The acoustic cavitation activity was investigated by determining the integrated SCL signal acquired over polyacrylamide gel phantoms containing luminol in the presence and absence of GNPs in the wavelength range of 400–500 nm using a spectrometer equipped with cooled charged coupled devices (CCD) during irradiation by different intensities of 1 MHz ultrasound and IPL pulses. In order to confirm these results, the terephthalic acid chemical dosimeter was utilized as well. The SCL signal recorded in the gel phantoms containing GNPs at different intensities of ultrasound in the presence of intense pulsed light was higher than the gel phantoms without GNPs. These results have been confirmed by the obtained data from the chemical dosimetry method. Acoustic cavitation in the presence of GNPs and intense pulsed light has been suggested as a new approach designed for decreasing threshold intensity of acoustic cavitation and improving targeted therapeutic effects.     

Nanoscale metal oxide particles produced in the plasma discharge in the liquid phase upon exposure to ultrasonic cavitation. 2. Sizes and stability. Dynamic light scattering study

Size distributions of tungsten oxide particles produced in the plasma discharge in the liquid phase upon exposure to ultrasound were studied by the dynamic light scattering method. Particles produced by this method under ultrasonic cavitation (USC), in the absence of cavitation, and without cavitation followed by ultrasonic processing are compared. The behavior of concentrations of particles of various size groups is comparatively estimated by the data on particle sizes and scattering intensity using the Rayleigh-Gans-Debye approximation. It is shown that ultrasonic processing improves the aggregative stability of suspension; in a suspension of particles produced under USC, large aggregates eventually decay into individual small particles.     

Mechanistic investigation of the sonochemical synthesis of zinc ferrite

In this investigation, an attempt has been made to establish the physical mechanism of sonochemical synthesis of zinc ferrite with concurrent analysis of experimental results and simulations of cavitation bubble dynamics. Experiments have been conducted with mechanical stirring as well as under ultrasound irradiation with variation of pH and the static pressure of the reaction medium. Results of this study reveal that physical effects produced by transient cavitation bubbles play a crucial role in the chemical synthesis. Generation of high amplitude shock waves by transient cavitation bubbles manifest their effect through in situ micro-calcination of metal oxide particles (which are generated through thermal hydrolysis of metal acetates) due to energetic collisions between them. Micro-calcination of oxide particles can also occur in the thin liquid shell surrounding bubble interface, which gets heated up during transient collapse of bubbles. The sonochemical effect of production of OH radicals and H₂O₂, in itself, is not able to yield ferrite. Moreover, as the in situ micro-calcination involves very small number of particles or even individual particles (as in intra-particle collisions), the agglomeration between resulting ferrite particles is negligible (as compared to external calcination in convention route), leading to ferrite particles of smaller size (6 nm).     

Physical facets of ultrasonic cavitational synthesis of zinc ferrite particles

This paper addresses the physical features of the ultrasonic cavitational synthesis of zinc ferrite particles and tries to establish the relationship between cavitation physics and sonochemistry of the zinc ferrite synthesis. A dual approach of coupling experimental results with simulations of radial motion of cavitation bubbles has been adopted. The precursors for the zinc ferrite, viz. ZnO and Fe₃O₄ are produced in situ by the hydrolysis of Zn and Fe(II) acetates stimulated by OH radicals produced from the transient collapse of the cavitation bubbles. Experiments performed under different conditions create significant variation in the production of OH radicals, and hence, the rate of acetate hydrolysis. Correlation of the results of experiments and simulations sheds light on the important facets of the physical mechanism of ultrasonic cavitational zinc ferrite synthesis. It is revealed that too much or too little rate of acetate hydrolysis results in smaller particle size of zinc ferrite. The first effect of a higher rate of hydrolysis leads to excessively large growth of particles, due to which they become susceptible to the disruptive action of cavitation bubbles. Whereas, the second effect of too small rate of hydrolysis of Zn and Fe(II) acetates restricts the growth of particles. It has been observed that the initial reactant concentration does not influence the mean particle size or the size distribution of zinc ferrite particles. The present investigation clearly confirms that the rate-controlling step of zinc ferrite synthesis through ultrasonic cavitational route is the rate of formation of OH radicals from cavitation bubbles.     

MnO2/CeO2 for catalytic ultrasonic degradation of methyl orange

Catalytic ultrasonic degradation of aqueous methyl orange was studied in this paper. Heterogeneous catalyst MnO₂/CeO₂ was prepared by impregnation of manganese oxide on cerium oxide. Morphology and specific surface area of MnO₂/CeO₂ catalyst were characterized and its composition was determined. Results showed big differences between fresh and used catalyst. The removal efficiency of methyl orange by MnO₂/CeO₂ catalytic ultrasonic process was investigated. Results showed that ultrasonic process could remove 3.5% of methyl orange while catalytic ultrasonic process could remove 85% of methyl orange in 10 min. The effects of free radical scavengers were studied to determine the role of hydroxyl free radical in catalytic ultrasonic process. Results showed that methyl orange degradation efficiency declined after adding free radical scavengers, illustrating that hydroxyl free radical played an important role in degrading methyl orange. Theoretic analysis showed that the resonance size of cavitation bubbles was comparable with the size of catalyst particles. Thus, catalyst particles might act as cavitation nucleus and enhance ultrasonic cavitation effects. Measurement of H₂O₂ concentration in catalytic ultrasonic process confirmed this hypothesis. Effects of pre-adsorption on catalytic ultrasonic process were examined. Pre-adsorption significantly improved methyl orange removal. The potential explanation was that methyl orange molecules adsorbed on catalysts could enter cavitation bubbles and undergo stronger cavitation.     

换热器内超声空化效应影响因素数值研究

对超声波参数和换热器参数对超声波空化效应影响的研究,能够找出最佳的超声波参数使其防除垢效果更好。本文利用数值计算方法研究了超声波功率、频率和换热器内介质温度以及换热管的型式对超声空化的影响。结果表明,随着超声波功率的增大,水中汽含率也增大,而且变化也相对激烈;随着频率的增加汽含率先增大后降低,20 kHz为最佳频率;介质温度越高,空化效应越强烈;管径波动较多的波纹管更有利于空化效应的产生和发展。     

Effect of cavitation bubble on the dispersion of magnetorheological polishing fluid under ultrasonic preparation

In the ultrasonic dispersion process, the ultrasonic cavitation effect can seriously affect the dispersion efficiency of magnetorheological polishing fluid (MRPF), but the mechanism remains unclear now. Through considering the continuity equation and Vand viscosity equation of the suspension, a revised cavitation bubble dynamic model in the MRPF was developed and calculated. The effects of presence or absence of solid particles, the volume fraction of solid particles, and viscosity on the cavitation bubble motion characteristics in the MRPF were discussed. Settlement experiments of the MRPF under ultrasonic and mechanical dispersion were observed. Analysis of particle dispersion is made by trinocular biomicroscope and image processing of the microscopic morphology of the MRPF. The results show that the high volume fraction of carbonyl iron particle (CIP) will significantly weaken the cavitation effect, and the low volume fraction of green silicon carbide (GSC) has a negligible effect on the cavitation effect in the MRPF. When the liquid viscosity is greater than or equal to 0.1 Pa·s, it is inconvenient to produce micro-jets in the MRPF. The sedimentation rate of the MRPF prepared by ultrasonic dispersion is lower than mechanical dispersion when the volume fraction of CIP is between 1% and 25%. The dispersion ratio under ultrasonic dispersion is lower than that under mechanical dispersion. The experimental results fit the simulation well. It offers a theoretical basis for exploring the ultrasonic cavitation effect in the industrial application of the MRPF.     

Emulsification mechanism in an ultrasonic microreactor: Influence of surface roughness and ultrasound frequency

An ultrasonic microreactor with rough microchannels is presented in this study for oil-in-water (O/W) emulsion generation. Previous accounts have shown that surface pits or imperfections localize and enhance cavitation activity. In this study cavitation bubbles are localized on the rough microchannels of a borosilicate glass microreactor. The cavitation bubbles in the microchannel are primarily responsible for emulsification in the ultrasonic microreactor. We investigate the emulsification mechanism in the rough microchannels employing high-speed imaging to reveal the different emulsification modes influenced by the size and oscillation intensity of the cavitation bubbles. The effect of emulsification modes on the O/W emulsion droplet size distribution for different surface roughness and frequency is demonstrated. The positive effect of the frequency on minimizing the droplet size utilizing a reactor with large pits is presented. We also demonstrate microreactor systems for a successful generation of miniemulsions with high dispersed phase volume fractions up to 20%. The observed emulsification mechanism in the rough microchannel offers new insights into the utility and scale-up of ultrasonic microreactors for emulsification.