预处理条件对Pt/Al2O3催化还原NO的活性影响

用溶胶-凝胶法制备Al2O3载体,浸渍法制备质量分数为0.5%的Pt/Al2O3催化剂.研究焙烧气氛和温度对选择性催化还原NO反应活性和Pt价态的影响.结果表明,H2焙烧的活性温度区间最宽,随着焙烧温度的升高,温度区间变化很小,523K下O2焙烧的催化剂活性最好,且活性区间向高温方向移动.活性现象用程序升温脱附实验(NO-TPD,NO-O2-TPD)进行了解释.XPS研究表明,523K下O2用焙烧Pt的主要价态是Pt2+,而523K下H2和N2焙烧Pt的主要价态为Pt0.     

Influence of the thermal treatment conditions and composition of bimetallic catalysts Fe—Pd/SiO2 on the catalytic properties in phenylacetylene hydrogenation

The supported bimetallic Fe—Pd/SiO₂ catalysts with the different Fe (0.025—8 mass.%) and Pd (0.05—3.2 mass.%) loadings were synthesized by the incipient wetness impregnation of support. The samples were heat-treated under different conditions (calcination in air at 240—350 °C or reduction in an H₂ flow at 400 °C). The X-ray phase analysis revealed the formation of Pd⁰, α-Fe₂O₃ and Fe₃O₄ phases after calcination of the samples at 240—260 °C. The reduction of the calcined Fe—Pd samples in an H₂ flow at 400 °C enables the formation of Fe⁰ nanoparticles of size 17—20 nm. The synthesized catalytic systems were studied in the selective hydrogenation of phenylacetylene at room temperature and atmospheric pressure in a solvent (ethanol, propanol). The catalytic properties of the Fe—Pd catalysts depend on the nature of solvent, catalyst composition, and thermal treatment conditions. The application of the Fe—Pd bimetallic catalysts with a low Pd loading of 0.05—0.1 mass.% made it possible to reach the high activity and selectivity to styrene (91%) at the complete conversion of phenylacetylene.     

A study of Pt–Pd/γ-Al2O3 catalysts for methane oxidation resistant to deactivation by sulfur poisoning

The catalytic oxidation of methane was studied over calcined and reduced Pt–Pd/γ-Al₂O₃ catalysts, in the presence and the absence of SO₂ in the CH₄–O₂ reaction feed. The effect of sulfation (SO₂ + O₂ for 4 h at 500 °C) was also studied on the catalyst resistance to deactivation by sulfur poisoning. Sulfating the calcined Pt–Pd/γ-Al₂O₃ catalysts resulted in a strong deactivation for the CH₄–O₂ reaction. However, the catalytic activity of the reduced-sulfated Pt–Pd/γ-Al₂O₃ catalyst for CH₄–O₂ reaction remained rather unaffected in the presence and in the absence of SO₂ in the reaction feed. XPS analysis revealed, over reduced-sulfated Pt–Pd/γ-Al₂O₃ catalysts, the presence of Pt(0) metallic surface species on which SO₂ interactions may be faster related to Pd surface species. The presence of Pt(0) may be necessary to prevent the interactions between SO₂ and Pd surface species. Long time catalytic tests showed that the activity of a reduced Pt–Pd/γ-Al₂O₃ catalysts for CH₄–O₂ reactions remained rather unaffected despite the presence of SO₂ in the reaction feed.     

CO and C3H8 Total Oxidation over Pd Catalysts Supported on Commercial Ce-Zr Solid Solution: Effects of the Calcination Temperature and Hydrothermal Treatment

A series of Pd catalysts supported on commercial Ce-Zr solid solution(Pd/CZ) calcined at different temperatures(750, 900 and 1050 ℃) was prepared via an incipient wetness impregnation method. The activities of the fresh and hydrothermally aged Pd/CZ catalysts were tested for total oxidation of CO and C₃H₈. For CO oxidation, the activity of either fresh or aged Pd/CZ catalysts decreased with the elevating of calcination temperature of CZ support, with a fresh catalyst calcined at 750 ℃ possessing the highest activity and hydrothermal stability. For C₃H₈ total oxidation, the activity of Pd/CZ catalysts could be improved by increasing the calcination temperature of support. However, the aged Pd/CZ catalysts showed higher activity than corresponding fresh Pd/CZ catalysts. The turnover frequency(TOF) over Pd/CZ catalyst for CO oxidation increased with increasing reduction ability of the catalysts, with a fresh catalyst calcined at 750 ℃ having the highest value(0.27 s^-1). However, the TOF of Pd/CZ catalyst for C₃H₈ total oxidation was mainly affected by the size of Pd particles, and large Pd particles possessed a higher activity, with the highest TOF value(0.96 s^-1) obtained over an aged catalyst calcined at 1050 ℃.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Pd black decorated by Pt sub-monolayers as an electrocatalyst for the HCOOH oxidation

Pd black was modified by a very low amount of Pt corresponding to a sub-monolayer (ML). Spontaneous displacement method was employed. The catalysts with 0.02–0.12 ML were characterized by cyclic voltammetry and CO_ads stripping and were tested for HCOOH oxidation under the potentiodynamic and potentiostatic conditions. All the Pt@Pd catalysts were more active for HCOOH oxidation than Pd black. The Pt@Pd with 0.08 ML of Pt exhibited the highest activity with the maximum current density under the potentiodynamic conditions of 8 mA cm^?2 (vs. 2.7 mA cm^?2 on Pd black). Contrasting HCOOH oxidation kinetics on Pt@Pd and Pt@Au catalysts revealed that the current densities are higher, and the poisoning rate is lower on Pt@Pd catalyst. This was ascribed to an optimal strength of the Pt–adsorbate bond when Pt is supported on Pd and to a possible influence of the Pt atoms on the Pd substrate.     

焙烧温度对柴油车氧化催化剂Pt-Pd-（x）ZrO2/Ce0.3Zr0.7O2-Al2O3性能的影响

制备了氧化铝、铈锆固溶体复合氧化物负载铂、钯的双金属催化剂Pt-Pd/ Ce0.3Zr0.7O2-Al2O3,并添加3% ZrO2助剂改性,用于柴油车尾气中CO、HC和NO的催化氧化,其中贵金属负载量仅为0.68 wt%。考察了制备过程中焙烧温度对催化剂性能的影响。催化剂活性评价结果表明,与未添加ZrO2的催化剂比较。添加ZrO2明显提高了催化剂的低温氧化活性,而且焙烧温度对催化剂的氧化性能有较大影响。焙烧温度为800 ?C时,CO和C3H6的起燃温度最低,分别为168、189 ?C,焙烧温度为700 ?C时,NO转化为NO2的转化率最高,最大转化率为36%,具有较好的热稳定性。通过XRD、N2吸附-脱附、CO化学吸附、XPS、H2-TPR等表征手段考察了催化剂物理化学性质随焙烧温度的变化情况,并分析了与催化剂活性之间的关系,得到贵金属分散度、表面化学吸附氧含量、催化剂的还原性质对氧化性能有重要影响,发挥协同作用。进而可以通过优化焙烧温度提升柴油车氧化催化剂性能,对提高工业应用柴油车尾气后处理系统的净化效率有重要意义。     

Pt/HM,Pd/HM催化剂上NO-TPSR和CO-NO反应

消除NO对大气的污染，人们进行了广泛的研究，其中选择性催化还原是常用的方法[1]．众所周知，分子筛是常用的NO选择性还原催化剂载体，熊金保等[2]考察了Cu-ZSM-5催化剂表面NO的程脱产物，认为NO只吸附在Cu上，载体ZSM-5不吸附NO，Alvarez等[3]认为Na－ZSM-5和NaY表面有少量吸     

CeO2-Y2O3涂层和负载型Pd催化剂催化燃烧VOCs

制备了一种粘附在堇青石蜂窝陶瓷载体上的CeO_2-Y_2O_3(CeY)复合氧化物新涂层.以二氧化铈和柠檬酸钇为前驱体,制备过程中无有害物质产生,对环境友好.CeY涂层和Pd/CeY催化剂通过SEM、EDX、XRF和Raman光谱等表征.结果表明,此涂层的粘结强度高,对活性组分的吸附性能好,适合用来负载钯催化剂.Y_2O_3大部分进入了峰窝陶瓷的孔道内,CeO_2和Pd物种则富集在载体的表面.以CO、甲苯和乙酸乙酯的催化燃烧来评价Pd/CeY催化剂的性能,此催化剂具有较好的催化活性和热稳定性.500℃焙烧的催化剂,CO、甲苯和乙酸乙酯的T_(99)(转化率99%以上所需的最低反应温度)分别为150、220和310℃;1050℃焙烧的催化剂,它们的T_(99)分别为180、250和330℃.高温焙烧的催化剂,活性物种PdO的晶粒增大,这可能导致催化剂的活性下降.     

丝光沸石负载铂,钯催化剂的NO催化还原性能

丝光沸石负载铂、钯催化剂的ＮＯ催化还原性能１）罗孟飞朱波袁贤鑫（杭州大学催化研究所杭州３１００２８）关键词ＮＯ催化还原丝光沸石铂钯如何消除ＮＯｘ对环境造成的污染是当前人们所关心的课题之一，其中催化还原是消除ＮＯｘ的常用方法［１］．近几年，人们对金属离...     

Catalytic Activity of WO<Subscript>3</Subscript> and MoO<Subscript>3</Subscript> with Pt and Pd Additives in Oxidation of Hydrogen

We have shown that WO₃ and MoO₃ with Pt or Pd additives exhibit high catalytic activity in the reaction of H₂ oxidation. In the temperature range 313 K to 353 K, we have studied the kinetic behavior of the reaction on 0.1 mass % Pt(Pd)/WO₃ and Pt(Pd)/MoO₃ samples. We have established that the kinetics of H₂ oxidation on these catalysts correspond to an Eley - Rideal mechanism. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 313–316, September–October, 2005.     

Influence of the heat treatment conditions on the activity of the CoMo/Al2O3 catalyst for deep hydrodesulfurization of diesel fractions

The effect of the heat treatment temperature on the sulfidation and activity of CoMo/Al₂O₃ catalysts designed for deep hydrodesulfurization of diesel fuel was studied. The catalysts were prepared using citric acid as a chelating ligand. The organic ligands present in the samples heat-treated at 110 and 220°C retard the decomposition of dimethyl disulfide and the formation of the sulfide phase but make the catalyst more active than the samples calcined at higher temperatures.     

Effect of supports on activity and stability of Pt–Pd catalysts for oxygen reduction reaction in proton exchange membrane fuel cells

The platinum–palladium alloy (Pt–Pd) catalysts were prepared on various supports including Vulcan XC72, Hicon Black (HB), multiwalled carbon nanotubes (MWCNTs), and titanium dioxide (TiO₂) by a combined approach of impregnation and seeding using NaBH₄ reduction at low temperature. Their oxygen reduction reaction (ORR) activities in single proton exchange membrane fuel cell (PEMFC) under a H₂/O₂ environment and their stability in an acid electrolyte (0.5 M H₂SO₄) were tested and compared with the Vulcan XC72-supported Pt (Pt/C) catalysts. The presence of the Pd metal as well as different types of supports affected the ORR activity in H₂/O₂ environment and stability in the acid electrolyte. Overall, the HB-supported Pt–Pd (Pt–Pd/HB) catalysts provided the highest current density at 0.6 V under a H₂/O₂ environment, while the MWCNT-supported Pt–Pd (Pt–Pd/MWCNT) catalyst provided the best stability in an acid electrolyte.     

Pd-based sulfated zirconia prepared by a single step sol–gel procedure for lean NOx reduction

Pd-based sulfated zirconia catalysts have been prepared through a single step (one-pot) sol–gel preparation technique, in which both sulfate and Pd precursors were dissolved in an organic solution before the gelation step. Observation of the calcination procedure through TGA/DSC and mass spectrometry revealed that the addition of increasing amounts of Pd resulted in the evolution of organic precursor species at lower temperatures. In situ XRD experiments showed that tetragonal zirconia is formed at lower temperatures and larger zirconia crystallites are formed when Pd is added to the gel. Although tetragonal zirconia was the only phase observed through XRD, Raman spectra of samples calcined at 700 °C showed the presence of both the tetragonal and the monoclinic phase, indicating a surface phase transition. DRIFTS experiments showed NO species adsorbed on Pd²⁺ cations. Pd/SZ catalysts prepared through this single step method were active for the reduction of NO₂ with CH₄ under lean conditions. Calcination temperature had a significant effect on this activity, with samples calcined at 700 °C being much more active than those calcined at 600 °C, despite the observed transition to the monoclinic phase. This activity may be linked to observed changes in the surface sulfate species at higher calcination temperatures.     

制备条件对Pd催化剂上C3H6选择性还原NO性能的影响

采用浸渍法和溶胶凝胶法,制备了Pd/AI2O3和Pd/AI2O3-CeO2样品,并测定了不同温度焙烧后催化剂的物相、比表面积及对丙烯选择性还原NO的活性。对于Pd/AI2O3,随着焙烧温度的提高,其NO的最大转化率逐渐下降,对应的反应温度在290－310℃左右,而溶胶凝胶法制备的样品活性略高于浸渍法制备的样品;对于Pd/AI2O3-CeO2,经600℃焙烧后,其NO的最大转化率为22％,900℃焙烧的催化剂样品上NO的最大转化率达到40％左右,对应的反应温度也逐渐下降,说明活性随焙烧温度的提高而明显提高,溶胶凝胶法和浸渍法制备的样品结果很接近,浸渍法制备了若干不同Pd负载量的Pd/AI2O3样品,活性测定的结果表明,Pd含量在0．5％左右的催化剂样品中具有最高的活性。     

Bimetallic Pd—Pt/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for complete methane oxidation: the effect of the Pt: Pd ratio

Alumina-supported bimetallic Pt—Pd catalysts proved to be more active in the complete oxidation of methane than monometallic systems (Pt/Al₂O₃, Pd/Al₂O₃). The maximum activity of the bimetallic catalysts was achieved at ~40 at.% Pt in Pd on the catalyst surface. After the oxidation reaction, redistribution of platinum and palladium was observed in the active component of the catalysts with the degree of redistribution depending on the initial Pt: Pd ratio.     

Pt/TiO2催化剂上CO氧化反应动力学研究

利用沉积沉淀法制备了Pt/TiO₂催化剂, 将其在不同温度下焙烧, 以得到不同颗粒尺寸的Pt. 并将这些样品用于CO催化氧化反应以及反应动力学研究. 结果表明: 焙烧温度对催化剂有明显影响, Pt 颗粒尺寸随着焙烧温度的升高而增加; 与此同时, CO催化活性随焙烧温度的升高呈先增加后降低的趋势, 其中, 400℃焙烧的样品表现出最高的催化活性. 反应动力学结果表明, 催化剂上CO氧化反应表观速率方程为r=5.4×10^-7p_CO^0.17p_O2^0.36,说明在该催化剂上CO氧化遵循Langmuir-Hinshelwood机理. 同时, 对催化剂进行了CO化学吸附红外光谱和O₂化学吸附表征. 结果表明, 随着焙烧温度的升高, 催化剂上CO和O₂吸附量均呈现先升高后降低的趋势, 这与反应结果和反应动力学方程一致, 说明反应受到催化剂表面上CO和O₂吸附浓度的影响. 而在400℃焙烧的催化剂上, CO和O₂吸附量均最高, 因此其反应活性也最好. 这可能是焙烧过程影响了Pt 和TiO₂之间的相互作用引起的.     

Structure and properties of Pd–Mn hexaaluminate catalysts modified with platinum for the high-temperature oxidation of methane

The effect of Pt additives on the catalytic characteristics of a Pd-containing catalyst based on manganese hexaaluminate was studied. It was found that the bimetallic PtPd-containing catalysts based on MnLaAl₁₁O₁₉ with the Pt/Pd atomic ratio smaller than 0.25 exhibited a comparable or somewhat smaller activity in the methane oxidation, but their stability at elevated temperatures and gas flow rates was higher than that of the Pd-based catalyst. The state of the active constituent of the resulting catalysts was investigated. Main correlations between the state of the active component and the catalytic activity were revealed.     

The role of doped Fe on the activity of alumina-supported Pt and Pd diesel exhaust catalysts

Supported Pt and Pd are most commonly used for oxidation catalysts. They have similar and different characteristics for deactivation factors. The catalytic activity of Pt and Pd catalysts supported on ??-Al₂O₃ was studied in the presence and absence of H₂O and SO₂ during CO oxidation under simulated conditions of diesel exhaust gas. Without the addition of H₂O and SO₂ to the feed gas, Pd/Al₂O₃ had a superior catalytic activity compared to Pt/Al₂O₃. The addition of H₂O to the feed gas strongly and negligibly affected the activity of Pd and Pt, respectively, while the addition of SO₂ to the feed gas had a strong poisoning effect on the catalytic activity of both Pt and Pd catalysts. Although being the most active, Pd catalysts exhibited a strong sensitivity to water and sulfur-containing compounds. Fe was added to the Pt and Pd catalysts to introduce sulfur resistance. The addition of Fe enhanced the activity of the catalysts by suppressing the phase transition of Al₂O₃ to Al₂(SO₄)₃ and by hindering metal sintering.     

High Electrocatalytic Activity of Pt–Pd Binary Spherocrystals Chemically Assembled in Vertically Aligned TiO2 Nanotubes

To obtain noble metal catalysts with high efficiency, long‐term stability, and poison resistance, Pt and Pd are assembled in highly ordered and vertically aligned TiO₂ nanotubes (NTs) by means of the pulsed‐current deposition (PCD) method with assistance of ultrasonication (UC). Here, Pd serves as a dispersant which prevents agglomeration of Pt. Thus Pt–Pd binary catalysts are embed into TiO₂ NTs array under UC in sunken patterns of composite spherocrystals (Sps). Owing to this synthesis method and restriction by the NTs, the these catalysts show improved dispersion, more catalytically active sites, and higher surface area. This nanotubular metallic support material with good physical and chemical stability prevents catalyst loss and poisoning. Compared with monometallic Pt and Pd, the sunken‐structured Pt–Pd spherocrystal catalyst exhibits better catalytic activity and poison resistance in electrocatalytic methanol oxidation because of its excellent dispersion. The catalytic current density is enhanced by about 15 and 310 times relative to monometallic Pt and Pd, respectively. The poison resistance of the Pt–Pd catalyst was 1.5 times higher than that of Pt and Pd, and they show high electrochemical stability with a stable current enduring for more than 2100 s. Thus, the TiO₂ NTs on a Ti substrate serve as an excellent support material for the loading and dispersion of noble metal catalysts.