VFe3S4 single and double cubane clusters: synthesis, structures, and dependence of redox potentials and electron distribution on ligation and heterometal

Both vanadium and molybdenum cofactor clusters are found in nitrogenase. In biomimetic research, many fewer heterometal MFe3S4 cubane-type clusters have been synthesized with M = V than with M = Mo because of the well-established structural relationship of the latter to the molybdenum coordination unit in the enzyme. In this work, a series of single cubane and edge-bridged double cubane clusters containing the cores [VFe3(mu3-S)4]2+ and [V2Fe6(mu3-S)6(mu4-S)2]2+ have been prepared by ligand substitution of the phosphine clusters [(Tp)VFe3S4(PEt3)3]1+ and [(Tp)2V2Fe6S8(PEt3)4]. The single cubanes [(Tp)VFe3S4L3]2- and double cubanes [(Tp)2V2Fe6S8L4]4- (L= F-, N3-, CN-, PhS-) are shown by X-ray structures to have trigonal symmetry and centrosymmetry, respectively. Single cubanes form the three-member electron transfer series [(Tp)VFe3S4L3]3-,2-,1-. The ligand dependence of redox potentials and electron distribution in cluster cores as sensed by 57Fe isomer shifts (delta) have been determined. Comparison of these results with those previously determined for the analogous molybdenum clusters (Pesavento, Berlinguette, and Holm Inorg. Chem. 2007, 46, 510) allows detection of the influence of heterometal M on the properties. At constant M and variable L, redox potentials are lowest for pi-donor ligands and largest for cyanide and relate approximately with decreasing ferrous character in clusters with constant charge z = 2-. At constant L and z and variable M, EV > E(Mo) and delta(av)V < delta(av)Mo, demonstrating that M = Mo clusters are more readily oxidized and suggesting a qualitative relation between lower potentials (greater ease of oxidation) and ferrous character.     

Rearrangement of symmetrical dicubane clusters into topological analogues of the P cluster of nitrogenase: nature's choice?

Reaction schemes have been developed that lead to clusters having the topology of the PN cluster of nitrogenase. The single cubane clusters [(Tp)MFe3S4Cl3]z (M = Mo, z = 1-; M = V, z = 2-) react with PEt3 to give [(Tp)MFe3S4(PEt3)3]1+, which are reduced to the neutral edge-bridged double cubanes [(Tp)2M2Fe6S8(PEt3)4] with highly reduced (2[MFe3S4]1+) cores. Reaction of these clusters in acetonitrile with (Et4N)(HS) results in the formation of [(Tp)2Mo2Fe6S9(SH)2]3- and [(Tp)2V2Fe6S9(SH)2]4-. X-ray structures of the Et4N+ salts reveal the bridging pattern M2Fe6(mu2-S)2(mu3-S)6(mu6-S) in which two cuboidal MFe3(mu3-S)3 units share the common bridge atom mu6-S and are externally bridged by two mu2-S atoms. The M sites possess trigonal octahedral, and the Fe sites, distorted tetrahedral coordination. Hydrosulfide ligands and sulfide atoms simulate terminal cysteinate ligation and mu2 bridges, respectively, in the protein-bound cluster Fe8S7(mu2-SCys)2(SCys)4. The synthetic clusters have the same bridging pattern as the PN cluster and approach congruency with it. These clusters are the first molecular topological analogues of a PN cluster. Like the latter, they are substantially reduced (majority of Fe(II)).     

Hydroxide-promoted core conversions of molybdenum-iron-sulfur edge-bridged double cubanes: oxygen-ligated topological PN clusters

The occurrence of a heteroatom X (C, N, or O) in the MoFe7S9X core of the iron-molybdenum cofactor of nitrogenase has encouraged synthetic attempts to prepare high-nuclearity M-Fe-S-X clusters containing such atoms. We have previously shown that reaction of the edge-bridged double cubane [(Tp)2Mo2Fe6S8(PEt3)4] (1) with nucleophiles HQ- affords the clusters [(Tp)2Mo2Fe6S8Q(QH)2](3-) (Q = S, Se) in which HQ- is a terminal ligand and Q(2-) is a mu2-bridging atom in the core. Reactions with OH- used as such or oxygen nucleophiles generated in acetonitrile from (Bu3Sn)2O or Me3SnOH and fluoride were examined. Reaction of 1 with Et4NOH in acetonitrile/water generates [(Tp)2Mo2Fe6S9(OH)2]3- (3), isolated as [(Tp)2Mo2Fe6S9(OH)(OC(=NH)Me)(H2O)](3-) and shown to have the [Mo2Fe6(mu2-S)2(mu3-S)6(mu6-S)] core topology very similar to the P(N) cluster of nitrogenase. The reaction system 1/Et4NOH in acetonitrile/methanol yields the P(N)-type cluster [(Tp)2Mo2Fe6S9(OMe)2(H2O)](3-) (5). The system 1/Me3SnOH/F- affords the oxo-bridged double P(N)-type cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}5- (7), convertible to the oxidized cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}4- (6), which is prepared independently from [(Tp)2Mo2Fe6S9F2(H2O)](3-)/(Bu3Sn)2O. In the preparations of 3-5 and 7, hydroxide liberates sulfide from 1 leading to the formation of P(N)-type clusters. Unlike reactions with HQ-, no oxygen atoms are integrated into the core structures of the products. However, the half-dimer composition [Mo2Fe6S9O] relates to the MoFe7S9 constitution of the putative native cluster with X = O. (Tp = hydrotris(pyrazolyl) borate(1-)).     

Synthesis of a molecular Mo2Fe6S9 cluster with the topology of the PN cluster of nitrogenase by rearrangement of an edge-bridged Mo2Fe6S8 double cubane

The structures of the P cluster and cofactor cluster of nitrogenase are well-defined crystallographically. They have been obtained only by biosynthesis; their chemical synthesis remains a challenge. Synthetic routes are sought to the P cluster in the P(N) state in which two cuboidal Fe(3)S(3) units are connected by a mu(6)-S atom and two Fe-(mu(2)-S(Cys))-Fe bridges. A reaction scheme affording a Mo(2)Fe(6)S(9) cluster in molecular form having the topology of the P(N) cluster has been devised. Reaction of the single cubane [(Tp)MoFe(3)S(4)Cl(3)](1)(-) with PEt(3) gives [(Tp)MoFe(3)S(4)(PEt(3))(3)](1+) (2), which upon reduction with BH(4)(-) affords the edge-bridged all-ferrous double cubane [(Tp)(2)Mo(2)Fe(6)S(8)(PEt(3))(4)] (4) (Tp = tris(pyrazolylhydroborate(1-)). Treatment of 4 with 3 equiv of HS(-) produces [(Tp)(2)Mo(2)Fe(6)S(9)(SH)(2)](3)(-) (7) as the Et(4)N(+) salt in 86% yield. The structure of 7 is built of two (Tp)MoFe(3)(mu(3)-S)(3) cuboidal fragments bridged by two mu(2)-S atoms and one mu(6)-S atom in an arrangement of idealized C(2) symmetry. The cluster undergoes three one-electron oxidation reactions and is oxidatively cleaved by p-tolylthiol to [(Tp)MoFe(3)S(4)(S-p-tol)(3)](2)(-) and by weak acids to [(Tp)MoFe(3)S(4)(SH)(3)](2-). The cluster core of 7 has the bridging pattern [Mo(2)Fe(6)(mu(2)-S)(2)(mu(3)-S)(6)(mu(6)-S)](1+) with the probable charge distribution [Mo(3+)(2)Fe(2+)(5)Fe(3+)S(9)](1+). Cluster 7 is a topological analogue of the P(N) cluster but differs in having two heteroatoms and two Fe-(mu(2)-S)-Fe instead of two Fe-(mu(2)-S(Cys))-Fe bridges. A best-fit superposition of the two cluster cores affords a weighted rms deviation in atom positions of 0.38 A. Cluster 7 is the first molecular topological analogue of the P(N) cluster. This structure had been prepared previously only as a fragment of complex high-nuclearity Mo-Fe-S clusters.     

Structural conversions of molybdenum-iron-sulfur edge-bridged double cubanes and P(n)-type clusters topologically related to the nitrogenase P-cluster

Edge-bridged Mo-Fe-S double cubanes are versatile precursors for the synthesis of other clusters of the same nuclearity. Thus, the double cubane [(Tp)(2)Mo(2)Fe(6)S(8)(PEt(3))(4)] sustains terminal ligand substitution with retention of the Mo(2)Fe(6)(micro(3)-S)(6)(micro(4)-S)(2) core structure and rearrangement to the Mo(2)Fe(6)(micro(2)-S)(2)(micro(3)-S)(6)(micro(6)-S) topology of the nitrogenase P(N) cluster upon reaction with certain nucleophiles. Four distinct processes for the conversion of double cubanes to P(N)-type clusters are documented, affording the products [(Tp)(2)Mo(2)Fe(6)S(9)(SR)(2)](3)(-), [(Tp)(2)Mo(2)Fe(6)S(8)(OMe)(3)](3)(-), and [(Tp)(2)Mo(2)Fe(6)S(7)(OMe)(4)](2)(-). In the latter clusters, two methoxides are terminal ligands and one or two are micro(2)-bridging ligands. The reverse transformation of a P(N)-type cluster to an edge-bridged double cubane has been demonstrated by the reaction of [(Tp)(2)Mo(2)Fe(6)S(8)(OMe)(3)](3)(-) with Me(3)SiX to afford [(Tp)(2)Mo(2)Fe(6)S(8)X(4)](2)(-) (X = Cl(-), Br(-)). Edge-bridged double cubanes have been obtained in the oxidation states [Mo(2)Fe(6)S(8)](2+,3+,4+). The stable oxidation state of P(N)-type clusters is [Mo(2)Fe(6)S(9)](+). Structures of five double cubanes and four P(N)-type clusters are reported. The P(N)-type clusters are synthetic representations of the biologically unique topology of the native P(N) cluster. Best-fit superpositions of the native and synthetic cluster cores gives weighted rms deviations in atom positions of 0.20-0.38 A. This study and an earlier investigation (Zhang, Y.; Holm, R. H. J. Am. Chem. Soc. 2003, 125, 3910-3920) provide a comprehensive account of the synthesis of structural analogues of the native P(N) cluster and provide the basis for continuing investigation of the synthesis of weak-field Mo-Fe-S clusters related to nitrogenase. (Tp = tris(pyrazolyl)hydroborate(1-).)     

Molybdenum-iron-sulfur clusters of nuclearities eight and sixteen, including a topological analogue of the P-cluster of nitrogenase

Transformations of the edge-bridged double cubane cluster [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4] (1) under reducing conditions have been investigated as synthetic approaches to the clusters of nitrogenase. Cluster 1 is a versatile precursor to different Mo-Fe-S cluster types. The reaction system 1/K(C14H10) in THF yields the reduced cluster [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4]1- (2), which as its crystalline Et4N+ salt retains the edge-bridged structure of 1. X-ray structural and M?ssbauer spectroscopic results indicate an unsymmetrical electron distribution with localized [MoFe3S4]2+,1+ cubane-type units. The system 1/2K(C14H10)/2HS- in THF/acetonitrile affords [(Cl4cat)4(Et3P)4Mo4Fe12S20K3(DMF)]5- (3), whose structure was determined as the Ph3PMe+ salt. The cluster consists of two isostructural Mo2Fe6S9 fragments connected by two mu 2-S bridges. Three potassium ions are bound between the two fragments. In each fragment, the iron atoms are present in tetrahedral FeS4 and the molybdenum atoms in octahedral MoO2PS3 coordination units, and two MoFe3(mu 3-S)3 cuboidal units are bridged by a common mu 6-S atom. The fragments have idealized mirror symmetry and are isostructural with two of the fragments present in the previously reported high-nuclearity cluster [(Cl4cat)6(Et3P)6Mo6Fe20S30]8- (4) (Osterloh, F.; Sanakis, Y.; Staples, R. J.; Münck, E.; Holm, R. H. Angew. Chem., Int. Ed. Engl. 1999, 38, 2066). On the basis of overall shape, atom connectivities, and metric features, the Mo2Fe6S9 fragment is a topological analogue of the P-cluster of nitrogenase in the PN (reduced) state. A third cluster type, formed as a minor byproduct in the reaction system leading to 2, was crystallographically identified as [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4]4-, whose core is made up of two MoFe3(mu 3-S)3 cuboidal units bridged by two mu 2-S atoms and connected by a direct Fe-Fe bond. Full structural details and the redox properties of 2 and 3 are reported.     

Stabilization of reduced molybdenum-iron-sulfur single- and double-cubane clusters by cyanide ligation

Recent work has shown that cyanide ligation increases the redox potentials of Fe(4)S(4) clusters, enabling the isolation of [Fe(4)S(4)(CN)4]4-, the first synthetic Fe(4)S(4) cluster obtained in the all-ferrous oxidation state (Scott, T. A.; Berlinguette, C. P.; Holm, R. H.; Zhou, H.-C. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 9741). The generality of reduced cluster stabilization has been examined with MoFe(3)S(4) clusters. Reaction of single-cubane [(Tp)MoFe(3)S(4)(PEt(3))3]1+ and edge-bridged double-cubane [(Tp)2Mo(2)Fe(6)S(8)(PEt(3))4] with cyanide in acetonitrile affords [(Tp)MoFe(3)S(4)(CN)3]2- (2) and [(Tp)2Mo(2)Fe(6)S(8)(CN)4]4- (5), respectively. Reduction of 2 with KC(14)H(10) yields [(Tp)MoFe(3)S(4)(CN)3]3- (3). Clusters were isolated in approximately 70-90% yields as Et(4)N+ or Bu(4)N+ salts; clusters 3 and 5 contain all-ferrous cores, and 3 is the first [MoFe(3)S(4)]1+ cluster isolated in substance. The structures of 2 and 3 are very similar; the volume of the reduced cluster core is slightly larger (2.5%), a usual effect upon reduction of cubane-type Fe(4)S(4) and MFe(3)S(4) clusters. Redox potentials and 57Fe isomer shifts of [(Tp)MoFe(3)S(4)L3]2-,3- and [(Tp)2Mo(2)Fe(6)S(8)L(4)]4-,3- clusters with L = CN-, PhS-, halide, and PEt3 are compared. Clusters with pi-donor ligands (L = halide, PhS) exhibit larger isomer shifts and lower (more negative) redox potentials, while pi-acceptor ligands (L = CN, PEt3) induce smaller isomer shifts and higher (less-negative) redox potentials. When the potentials of 3/2 and [(Tp)MoFe(3)S(4)(SPh)3]3-/2- are compared, cyanide stabilizes 3 by 270 mV versus the reduced thiolate cluster, commensurate with the 310 mV stabilization of [Fe(4)S(4)(CN)4]4- versus [Fe(4)S(4)(SPh)4]4- where four ligands differ. These results demonstrate the efficacy of cyanide stabilization of lower cluster oxidation states. (Tp = hydrotris(pyrazolyl)borate(1-)).     

Reduced mono-, di-, and tetracubane-type clusters containing the [MoFe3S4]2+ core stabilized by tertiary phosphine ligation

Treatment of oxidized clusters [(Cl4cat)(MeCN)MoFe3S4Cl3]2- (1) and [(Meida)MoFe3S4Cl3]2- (2) with tertiary phosphines in the presence of NaBPh4 in acetonitrile results in chloride substitution at the iron sites and the formation of clusters with the reduced [MoFe3S4]2+ core. Thus, 1 is a precursor to [(Cl4cat)(MeCN)MoFe3S4(PR3)3] (R = But (3), Pri (4)) and [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4] (5). Cluster 2 affords [[(Meida)MoFe3S4(PCy3)3]4Fe2(mu-Cl)L2]3+ (L = THF (6), MeCN (7)). The structures of 3-7 were established by X-ray analysis. Clusters 3 and 4 are single cubanes, centrosymmetric 5 (previously reported in a different space group: Demadis, K. D.; Campana, C. F.; Coucouvanis, D. J. Am. Chem. Soc. 1995, 117, 7832) is a double cubane with a rhomboidal Fe2S2 bridge, and 6 and 7 are tetracubanes. In the latter, four Meida oxygen atoms from different cubanes bind each of two central high-spin Fe(II) atoms in trans-Fe(mu-Cl)LO4 coordination. The topology of these clusters is not precedented. Zero-field M?ssbauer parameters for all clusters are reported. Isomer shift considerations suggest the formulation [Mo3+Fe2+2Fe3+S4] for reduced clusters. Voltammetry of 3 and 4 reveals four-member electron transfer series encompassing the oxidation levels [MoFe3S4]4+,3+,2+,+ in the potential interval + 1.0 to -1.3 V vs SCE in dichloromethane. Compared to the clusters with monoanionic ligands at the iron sites, phosphine ligation shifts redox potentials to more positive values. This effect arises from reduction of cluster negative charge and the tendency of phosphines to stabilize lower oxidation states. The synthesis of reduced clusters 4 from 1 and of [Fe4S4(PPri3)4]+ from [Fe4S4Cl4]2- is accompanied by the formation of Pri3PS, detected by 31P NMR, indicating that the phosphine is the reductant. This result implies a similar function of tertiary phosphines in the synthesis of 3 and 5-7. (Cl4cat = tetrachlorocatecholate(2-); Meida = N-methyliminodiacetate(2-).)     

Edge-bridged Mo2Fe6S8 to pN-type Mo2Fe6S9 cluster conversion: structural fate of the attacking sulfide/selenide nucleophile

Reaction of the edge-bridged double cubane cluster [(Tp)(2)M(2)Fe(6)S(8)(PEt(3))(4)] (1; Tp = hydrotris(pyrazolyl)borate(1-)) with hydrosulfide affords the clusters [(Tp)(2)M(2)Fe(6)S(9)(SH)(2)](3)(-)(,4)(-) (M = Mo (2), V), which have been established as the first structural (topological) analogues of the P(N) cluster of nitrogenase. The synthetic reaction is an example of core conversion, resulting in the transformation M(2)Fe(6)(mu(3)-S)(6)(mu(4)-S)(2) (C(i)) --> M(2)Fe(6)(mu(2)-S)(2)(mu(3)-S)(6)(mu(6)-S) (C(2)(v)), the reaction pathway of which is unknown. The most prominent structural feature of P(N)-type clusters is the mu(6)-S atom, which bridges six iron atoms in two MFe(3)S(3) cuboidal halves of the cluster. The initial issue in core conversion is the origin of the mu(6)-S atom. Utilizing SeH(-) as a surrogate reactant for SH(-) in the system 1/SeH(-)/L(-) in acetonitrile, a series of selenide clusters [(Tp)(2)Mo(2)Fe(6)S(8)SeL(2)](3)(-) (L(-) = SH(-) (4), SeH(-) (5), EtS(-) (6), CN(-) (7)) was prepared. The electrospray mass spectra of 4 and 6 revealed inclusion of one Se atom in each cluster, and (1)H NMR spectra and crystallographic refinements of 4-7 indicated that this atom was disordered over the two mu(2)-S/Se positions. The clusters {[(Tp)(2)Mo(2)Fe(6)S(9)](mu(2)-S)}(2)(5)(-) (8) and {[(Tp)(2)Mo(2)Fe(6)S(8)Se](mu(2)-Se)}(2)(5)(-) (9) were prepared from 2 and 5, respectively, and shown to be isostructural. They consist of two P(N)-type cluster units bridged by two mu(2)-S or mu(2)-Se atoms. It is concluded that, in the preparation of 2, the probable structural fate of the attacking nucleophile is as a mu(2)-S atom, and that the mu(3)-S and mu(6)-S atoms of the product cluster derive from precursor cluster 1. Cluster fragmentation during P(N)-type cluster synthesis is unlikely.     

Selenium as a structural surrogate of sulfur: template-assisted assembly of five types of tungsten-iron-sulfur/selenium clusters and the structural fate of chalcogenide reactants

Syntheses of five types of tungsten-iron-sulfur/selenium clusters, namely, incomplete cubanes, single cubanes, edge-bridged double cubanes (EBDCs), P(N)-type clusters, and double-cuboidal clusters, have been devised using the concept of template-assisted assembly. The template reactant is six-coordinate [(Tp*)W(VI)S(3)](1-) [Tp* = tris(3,5-dimethylpyrazolyl)hydroborate(1-)], which in the assembly systems organizes Fe(2+/3+) and sulfide/selenide into cuboidal [(Tp*)WFe(2)S(3)] or cubane [(Tp*)WFe(3)S(3)Q] (Q = S, Se) units. With appropriate terminal iron ligation, these units are capable of independent existence or may be transformed into higher-nuclearity species. Selenide is used as a surrogate for sulfide in cluster assembly in order to determine by X-ray structures the position occupied by an external chalcogenide nucleophile or an internal chalcogenide atom in the product clusters. Specific incorporation of selenide is demonstrated by the formation of [WFe(3)S(3)Se](2+/3+) cubane cores. Reductive dimerization of the cubane leads to the EBDC core [W(2)Fe(6)S(6)Se(2)](2+) containing μ(4)-Se sites. Reaction of these species with HSe(-) affords the P(N)-type cores [W(2)Fe(6)S(6)Se(3)](1+), in which selenide occupies μ(6)-Se and μ(2)-Se sites. The reaction of [(Tp*)WS(3)](1-), FeCl(2), and Na(2)Se yields the double-cuboidal [W(2)Fe(4)S(6)Se(3)](2+/0) core with μ(2)-Se and μ(4)-Se bridges. It is highly probable that in analogous sulfide-only assembly systems, external and internal sulfide reactants occupy corresponding positions in the cluster products. The results further demonstrate the viability of template-assisted cluster synthesis inasmuch as the reduced (Tp*)WS(3) unit is present in all of the clusters. Structures, zero-field M?ssbauer data, and redox potentials are presented for each cluster type.     

过渡金属硫簇的几种簇骼转化反应

报道了过渡金属硫簇化合物的几种簇骼转化反应，即三核链状簇的转化；双核配合物的组合；Ｍｏ２Ｆｅ７Ｓ８和Ｍｏ２Ｆｅ６Ｓ８两种双立方烷的关联；Ｆｅ４Ｓ４立方烷簇向篮状簇的转化；簇降解以及簇骼原子置换反应等。探讨了配体及氧化还原条件对簇骼转化反应的影响。     

Synthesis and structure of the organometallic MFe2(mu3-S)2 clusters (M = Mo or Fe)

New organometallic clusters with the MFe2(mu3-S)2 core (M = Mo or Fe) have been synthesized from inorganic [MoFe3S4] or [Fe4S4] clusters under high pressure CO. The reaction of (Cl4-cat)2Mo2Fe6S8(PR3)6[R = Et, (n)Pr] with high pressure CO produced the crystalline [MoFe2S2]4+ clusters, (Cl4-cat)Mo(O)Fe2S2(CO)(n)(PR3)6-n[n= 4, Et =I, (n)Pr =II; n = 5, Et =III] after flash column chromatography. The similar [MoFe2S2]4+ cluster, (Cl4-cat)2MoFe2S2(CO)2(depe)(2)(IV), also has been achieved by the reactions of (Cl4-cat)MoFe3S3(CO)6(PEt3)2 with depe by reductive decoupling of the cluster. For the [Fe3(mu3-S)2]4+ cluster, [Fe4S4(PcHex3)4](BPh4) was reacted with high pressure CO to produce a new Fe3S2(CO)7(PcHex)(2)(V) compound. These reactions generalized the preparation of organometallic compounds from inorganic clusters. All the compounds have been characterized by single crystal X-ray crystallography. A possible reaction pathway for the synthesis of the MFe2(mu3-S) clusters (M = Mo or Fe) has also been suggested.     

Borohydride, azide, and chloride anions as terminal ligands on Fe/Mo/S clusters. Synthesis, structure and characterization of [(Cl4-cat)(PPr3) MoFe3S4(X)2]2(Bu4N)4 and [(Cl4-cat)(PPr3)MoFe3S4 (PPr3)(X)]2(Bu4N)2 (X = N3-, BH4-, Cl-) double-fused cubanes. NMR reactivity studies of [(Cl4-cat)(PPr3) MoFe3S4(BH4)2]2(Bu4N)4

Our explorations of the reactivity of Fe/Mo/S clusters of some relevance to the FeMoco nitrogenase have led to new double-fused cubane clusters with the Mo2Fe6S8 core as derivatives of the known (Cl4-cat)2Mo2Fe6S8(PPr3)6 (I) fused double cubane. The new clusters have been obtained by substitution reactions of the PPr3 ligands with Cl-, BH4-, and N3-. By careful control of the conditions of these reactions, the clusters [(Cl4-cat)(PPr3)MoFe3S4(BH4)2]2(Bu4N)4 (II), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(BH4)]2(Bu4N)2 (III), [(Cl4-cat)(PPr3)MoFe3S4(N3)2]2(Bu4N)4 (IV), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(N3)]2(Bu4N)2 (V), and [(Cl4-cat)(PPr3)MoFe3S4Cl2]2(Et4N)4 (VI) have been obtained and structurally characterized. A study of their electrochemistry shows that the reduction potentials for the derivatives of I are shifted to more positive values than those of I, suggesting a stabilization of the reduced clusters by the anionic ligands BH4- and N3-. Using 1H NMR spectroscopy, we have explored the lability of the BH4- ligand in II in coordinating solvents and its hydridic character, which is apparent in its reactivity toward proton sources such as MeOH or PhOH.     

Synthesis and reactivity of a bis(disulfide)-bridged RuMo3S4 double-cubane cluster: a new family of nona- or decanuclear mixed-metal sulfide clusters with two RuMo3S4 units

A bis(disulfide)-bridged RuMo3S4 double-cubane cluster [{(Cp*Mo)3(mu3-S)4Ru}(mu2-eta2:eta1-S2)]2[PF6]2 (2, Cp* = eta5-C5Me5) is readily available from cluster [(Cp*Mo)3(mu3-S)4RuH2(PPh3)][PF6] (1) and S8. The reactions of cluster 2 with [M(PPh3)4] (M = Pd, Pt) give rise to the formation of a new family of nona- or decanuclear mixed-metal sulfide clusters, [{(Cp*Mo)3(mu3-S)4Ru}2(mu3-S)2{Pd(S)(PPh3)}][PF6]2 (3), [{(Cp*Mo)3(mu3-S)4Ru}2(mu3-S)2{(Pd(PPh3))2(mu2-S)}][PF6]2 (4), and [{(Cp*Mo)3(mu3-S)4Ru}2(mu3-S)2{Pt(PPh3)2}][PF6]2 (5), with two RuMo3S4 cubane units, the structures of which have been determined by X-ray diffraction studies.     

High-nuclearity sulfide-rich molybdenum[bond]iron[bond]sulfur clusters: reevaluation and extension

High-nuclearity Mo[bond]Fe[bond]S clusters are of interest as potential synthetic precursors to the MoFe(7)S(9) cofactor cluster of nitrogenase. In this context, the synthesis and properties of previously reported but sparsely described trinuclear [(edt)(2)M(2)FeS(6)](3-) (M = Mo (2), W (3)) and hexanuclear [(edt)(2)Mo(2)Fe(4)S(9)](4-) (4, edt = ethane-1,2-dithiolate; Zhang, Z.; et al. Kexue Tongbao 1987, 32, 1405) have been reexamined and extended. More accurate structures of 2-4 that confirm earlier findings have been determined. Detailed preparations (not previously available) are given for 2 and 3, whose structures exhibit the C(2) arrangement [[(edt)M(S)(mu(2)-S)(2)](2)Fe(III)](3-) with square pyramidal Mo(V) and tetrahedral Fe(III). Oxidation states follow from (57)Fe M?ssbauer parameters and an S = (3)/(2) ground state from the EPR spectrum. The assembly system 2/3FeCl(3)/3Li(2)S/nNaSEt in methanol/acetonitrile (n = 4) affords (R(4)N)(4)[4] (R = Et, Bu; 70-80%). The structure of 4 contains the [Mo(2)Fe(4)(mu(2)-S)(6)(mu(3)-S)(2)(mu(4)-S)](0) core, with the same bridging pattern as the [Fe(6)S(9)](2-) core of [Fe(6)S(9)(SR)(2)](4-) (1), in overall C(2v) symmetry. Cluster 4 supports a reversible three-member electron transfer series 4-/3-/2- with E(1/2) = -0.76 and -0.30 V in Me(2)SO. Oxidation of (Et(4)N)(4)[4] in DMF with 1 equiv of tropylium ion gives [(edt)(2)Mo(2)Fe(4)S(9)](3-) (5) isolated as (Et(4)N)(3)[5].2DMF (75%). Alternatively, the assembly system (n = 3) gives the oxidized cluster directly as (Bu(4)N)(3)[5] (53%). Treatment of 5 with 1 equiv of [Cp(2)Fe](1+) in DMF did not result in one-electron oxidation but instead produced heptanuclear [(edt)(2)Mo(2)Fe(5)S(11)](3-) (6), isolated as the Bu(4)N(+)salt (38%). Cluster 6 features the previously unknown core Mo(2)Fe(5)(mu(2)-S)(7)(mu(3)-S)(4) in molecular C(2) symmetry. In 4-6, the (edt)MoS(3) sites are distorted trigonal bipramidal and the FeS(4) sites are distorted tetrahedral with all sulfide ligands bridging. M?ssbauer spectroscopic data for 2 and 4-6 are reported; (mean) iron oxidation states increase in the order 4 < 5 approximately 1 < 6 approximately 2. Redox and spectroscopic data attributed earlier to clusters 2 and 4 are largely in disagreement with those determined in this work. The only iron and molybdenum[bond]iron clusters with the same sulfide content as the iron[bond]molybdenum cofactor of nitrogenase are [Fe(6)S(9)(SR)(2)](4-) and [(edt)(2)Mo(2)Fe(4)S(9)](3-)(,4-).     

Stabilization of fully reduced iron-sulfur clusters by carbene ligation: the [FenSn]0 oxidation levels (n = 4, 8)

The all-ferrous [Fe4S4](0) state has been demonstrated in the fully reduced Fe protein of the Azotobacter vinelandii nitrogenase complex. We seek synthetic analogues of this state more tractable than the recently prepared but highly unstable cluster [Fe4S4(CN)4](4-) (Scott, Berlinguette, Holm, and Zhou, Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 9741). The N-heterocyclic carbene 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (Pr(i)2NHCMe2) has been found to stabilize the fully reduced clusters [Fe8S8(Pr(i)2NHCMe2)6] (4) and [Fe4S4(Pr(i)2NHCMe2)4] (5), which are prepared by cluster assembly or phosphine substitution of FenSn (n = 8, 16) clusters. Cluster 4 is also obtained by reaction of the carbene with all-ferrous [Fe7S6(PEt3)5Cl2] (3) and cluster 5 by carbene cleavage of 4. Detailed structures of 3 (monocapped prismatic), 4, and 5 are described; the latter two are the first iron-sulfur clusters with Fe-C sigma bonds. Cluster 4 possesses the [Fe8(mu3-S) 6(mu4-S)2] edge-bridged double cubane structure and 5 the cubane-type [Fe4(mu3-S)4] stereochemistry. The all-ferrous formulations of the clusters are confirmed by X-ray structure parameters and (57)Fe isomer shifts. Both clusters are stable under conventional aprotic anaerobic conditions, enabling further study of reactivity. The collective properties of 5 indicate that it is a meaningful synthetic analogue of the core of the fully reduced protein-bound cluster.     

Borohydride anions as terminal ligands on a Fe/Mo/S cluster. Synthesis, structure, and characterization of the [(Cl4-cat)(PPr3)MoFe3S4(BH4)2]2(Bu4N)4 double-fused cubane

The synthesis and structure of the first Mo/Fe/S/BH(4) cluster is reported. Reaction of (Cl(4)-cat)(2)Mo(2)Fe(6)S(8)(PPr(3))(6) with 4 equiv of Bu(4)NBH(4) results in the formation of [(Cl(4)-cat)(PPr(3))MoFe(3)S(4)(BH(4))(2)](2)(Bu(4)N)(4) (Cl(4)-cat = tetrachloro-catecholate) which has been fully characterized. X-ray structural determination of this double-fused cubane reveals four BH(4)(-) ligands bound to four Fe atoms in a bidentate fashion. A synopsis of the solution characterization as well as the reactivity of this cluster is also presented.