Development of reliable analytical method for extraction and separation of thorium(IV) by Cyanex 272 in kerosene

A simple and selective spectrophotometric method has been developed for the extraction and separation of thorium(IV) from sodium salicylate media using Cyanex 272 in kerosene. Thorium(IV) was quantitatively extracted by 5 × 10⁻⁴ M Cyanex 272 in kerosene from 1 × 10⁻⁵M sodium salicylate medium. The extracted thorium(IV) was stripped out quantitatively from the organic phase with 4.0 M hydrochloric acid and determined spectrophotometrically with arsenazo(III) at 620 nm. The effect of concentrations of sodium salicylate, extractant, diluents, metal ion and strippants has been studied. Separation of thorium(IV) from other elements was achieved from binary as well as multicomponent mixtures such as uranium(VI), strontium(II), rubidium(I), cesium(I), potassium(I), Sodium(I), lithium(I), lead(II), barium(II), beryllium(II) etc. Using this method separation and determination of thorium(IV) in geological and real samples has been carried out. The method is simple, rapid and selective with good reproducibility (approximately ±2%).     

Alpha spectroscopic analysis of actinides (Th,U and Pu) after separation from aqueous solutions by cation-exchange and liquid extraction

The radioactivity concentration of ²³⁶Pu, ²³²U and ²²⁸Th in aqueous samples has been determined by means of alpha spectroscopy after chemical separation and pre-concentration of the radionuclides by cation exchange and liquid–liquid extraction using the Chelex-100 resin and 30% TBP/dodecan, respectively. Method calibration using a ²³⁶Pu standard solution containing the daughter radionuclides results in a detector efficiency of 18% and in a chemical recovery for cation-exchange which is (30 ± 7)%, (90 ± 5)% and (20 ± 5)% for plutonium, uranium and thorium, respectively. The chemical recovery for liquid–liquid extraction is found to be (60 ± 7)%, (50 ± 5)% and (70 ± 5)%, for plutonium, uranium and thorium, respectively. The differences in the efficiencies can be ascribed to the oxidation states, the different actinides present in solution. Taking into account that the electrodeposition of the radionuclides under study is quantitative, the total method efficiency is calculated to be (18 ± 15)%, (46 ± 7)% and (15 ± 5)%, for plutonium, uranium and thorium, respectively, at the mBq concentration range. The detection limit of the alpha spectrometric system has been found to be 0.2 mBq/L, suggesting that the method could be successfully applied for the radiometric analysis of the studied radionuclides and particularly uranium in aqueous samples.     

Thorough investigation of the oxygen heterocyclic fraction of lime (Citrus aurantifolia (Christm.) Swingle) juice

Reversed‐phase‐HPLC analysis by means of superficially porous silica particle columns (fused‐core) was applied to the investigation of flavonoids, coumarins, and psoralens in lime juice samples. Hesperidin (367.0 ± 16.0 ppm) and eriocitrin (148.0 ± 7.9 ppm) were the most abundant flavonoids. Fifteen coumarins and furocoumarins were determined, including bergamottin (29.6 ± 1.1 ppm), 5‐geranyloxy‐7‐methoxycoumarin (16.5 ± 0.6 ppm), and oxypeucedanin hydrate (9.9 ± 0.5 ppm) as predominant compounds. These molecules are today well known for their beneficial effects on human health. As a consequence, the present study, beyond investigating for the first time the chemical composition of lime juice, highlights also its health‐promoting qualities, due to its content of flavonoids and coumarins.     

Transfer of uranium and thorium from soil to different parts of medicinal plants using SSNTD

The uptake of ²³⁸U and ²³²Th in different parts of some selected plants used in traditional treatment of hypertension and diabetes in south-eastern Morocco (Errachidia area) has been studied using two different types of solid state nuclear track detectors (SSNTDs) LR-115 type II and CR-39. Plant uptake of radionuclides is one of many vectors for introduction of contaminants into the human food chain. Thus, it is critical to understand soil–plant relationships that control nuclide bioavailability. Soil concentrations of uranium ranged from 6.10 to 11.62 ppm, with a mean of 7.90 ppm. Soil concentrations of thorium ranged from 2.70 to 4.80 ppm, with a mean of 3.41 ppm. Mean uranium specific activities were 8.38 Bq kg⁻¹ in root tissue, 5 Bq kg⁻¹ in stem tissue and 6.02 Bq kg⁻¹ in leaf tissue. Mean thorium specific activities were 2.53 Bq kg⁻¹ in root tissue, 1.64 Bq kg⁻¹ in stem tissue and 1.96 Bq kg⁻¹ in leaf tissue. The transfer factors of ²³⁸U and ²³²Th from soil to different parts (root, stem, leaf, seed and fruit) of studied plant samples have been investigated. The transfer factors obtained for root plants were markedly higher than those for leaf, stem, fruit and seed plants. Soil-to-plant transfer factor (TF) is one of the most important parameters to be used in transfer models for predicting the concentration of radionuclides in agricultural crops and for estimating dose impacts to man. This study of uranium and thorium uptake in plants used in traditional medicine is also significant as far as the health hazard effects of uranium and thorium in human being are concerned.     

Separation of thorium from uranium ore

Thorium-230 has many research applications, but there is not a commercial source of this isotope. However, since ²³⁰Th is part of the ²³⁸U decay chain, it can be separated from naturally occurring uranium. In this work, a novel procedure was developed to separate thorium from uranium ore, consisting of leaching, liquid–liquid extraction, precipitations and ion exchange chromatography. The final product was 91.32?±?0.77 mg of thorium with a purity of 99.5?±?1.2 wt%. Of that, 7.65?±?0.10 mg was ²³⁰Th and the remainder ²³²Th. The total yield of ²³⁰Th was 71.1?±?5.4%. Ways to improve the yield by further processing the back-extraction solution are suggested.

     

Estimation of natural potassium concentration in Romanian males by in vivo gamma-ray spectrometry measurements

At the Whole Body Monitoring Laboratory, from IFIN-HH, Bucharest, Romania, there were performed in vivo gamma-ray spectrometry measurements on 108 Romanian males in order to evaluate the mineral natural potassium content in human body, as total value and concentration. The measurements were performed with a shadow shield whole body counter, tilted chair geometry, based on a shielded NaI(Tl) scintillation detector of 12.5 cm (diameter) × 10 cm (height) crystal size. The results revealed a calculated value of the mean total body potassium (TBK) of 135.03 ± 2.94 g and a value of 1.9 ± 0.022 g of potassium/kg of body weight for the mean body potassium concentration, for the measured males. These values are similar with the values declared for the Reference Man, in ICRP23. Correlations between total body potassium, potassium concentration and age, weight and Body Build Index were investigated and peculiar conclusions were resulted.     

Quantitative estimation of total potassium and 40K in surface soil samples of Indian Sundarbans

The present study attempts to quantitatively estimate total potassium content in soil samples collected from different areas of Indian Sundarbans by gamma-spectrometry, exploiting the radiogenic properties of potassium and by wavelength dispersive X-ray fluorescence technique. The elemental K concentration varied in between 2.08 ± 0.05 and 3.46 ± 0.06% in the soil samples. Besides estimation of total potassium, the activity of ⁴⁰K was also estimated in the same soil samples and found to be in the range of 532 ± 8.9 to 1043 ± 13.2 Bq kg⁻¹.

     

Effects of potassium distributions in carbonizations of bituminous coal

The carbonization of coal/KOH mixtures were investigated to identify the influence of potassium distributions on characteristics of the final products. The products were characterized using TGA, BET, TEM and adsorption of lead from its aqueous solutions with initial concentrations of 10–100 ppm. For the activated carbon obtained at 600 °C, the potassium distribution affected both the BET surface areas (661–1994 m²/g) and the meso- and micro-pore volumes ratios (0.48–0.91). There were also evolutions of nanostructures of both straight and curved tubular morphologies as evidenced by TEM micrograph. The samples exhibited different adsorptive capacities when tested in adsorption of lead from aqueous solutions. The adsorption followed second order kinetics and the equilibrium data were better described by empirical Freudlich isotherm model. The amount of lead adsorbed ranges from 4.3 to 47.3 mg/g. Thus, different degrees of potassium effects led to activated carbons with different surface and adsorptive properties.     

The Correlations Between TCA-Glyoxalate Metabolite and Antibiotic Production of <Emphasis Type="Italic">Streptomyces</Emphasis> sp. M4018 Grown in Glycerol,Glucose, and Starch Mediums

The alterations of organic acids citrate, α-ketoglutarate, succinate, fumarate, malate production together with isocitrate lyase activity as a glyoxalate shunt enzyme, and antibiotic production of Streptomyces sp M4018 were investigated in relation to changes in the glucose, glycerol and starch concentrations (5–20 g/L) after identification as a strain of Streptomyces hiroshimensis based on phenotypic and genotypic characteristics. The highest intracellular citrate and α-ketoglutarate levels in 20 g/l of glucose, glycerol, and starch mediums were 399.47 ± 4.78, 426.93 ± 6.40, 355.84 ± 5.38 ppm and 444.81 ± 5.12, 192.96 ± 2.26, 115.20 ± 2.87 ppm, respectively. The highest succinate, malate, and fumarate levels were also determined in 20 g/l of glucose medium as 548.9 ± 11.21, 596.15 ± 8.26, and 406.42 ± 6.59 ppm and the levels were significantly higher than the levels in glycerol and starch. Extracellular organic acid levels measured also showed significant correlation with carbon source concentrations by showing negative correlation with pH levels of the growth medium. The antibiotic production of Streptomyces sp. M4018 was also higher in glucose medium as was the case also for organic acids when compared with glycerol. On the other hand, there is no production in starch.     

Coated wire thorium ion selective electrode: Part I

Coated wire ion selective electrode for thorium ion selective potentiometry was developed. Thorium ion selective coated wire electrodes were prepared by depositing a membrane comprising of Aliquat-336 loaded with Th(NO₃)₆²⁻ ions and poly vinyl chloride in varying proportion. A linear near-Nernstian response with a slope of −29.5 ± 0.3 mV over thorium concentration range of 1 × 10⁻¹–3 × 10⁻⁵ M in constant total nitrate concentration of 6 M was obtained for the electrodes of almost all the composition studied. In spite of small drift in response potential from composition to composition, day to day as well as from electrode to electrode, the slope of potential response line was constant within experimental error. Moreover, the electrode once prepared could be conveniently used over a period of one and half month.     

Evaluation of Gd,Sm and Eu in Egyptian monazite samples using the prompt neutron capture gamma-ray technique

Three Egyptian monazite samples from the beach black sand at Abou Khashba near Rosetta, submitted by the laboratories of the nuclear materials authority of Egypt were analyzed for elemental contents, using Prompt gamma ray neutron activation analysis (PGNAA) as an effective analysis technique especially for rare earth elements. An integrated system for PGNAA, located at hot Lab. Center, has proven useful for the analytical purpose using 252Cf neutron source with neutron flux of 6.16E7 n/cm² s, that system has been designed and calibrated for PGNAA. Sensitivity curves using different standard concentration values of artificial liquid standards samples at different concentrations ranging from 1,000 to 5,000 mg/L in case of Sm and Gd, while from 100 to 1,000 mg/L for Eu, have been constructed. The average concentration values for Gd, Sm and Eu in the samples under investigation was at 1.46E4 ± 0.21, 6.683E4 ± 0.14 and 440 ± 0.18 ppm, respectively. A comparative study of the obtained results and the results of ICP-Ms was given.     

Mesures de la perfusion cérébrale chez le rat à l’aide de la RMN du 129Xe hyperpolarisé : étude de fluides biologiques vecteurs du 129Xe

The high xenon solubility in blood and tissues makes hyperpolarized ¹²⁹Xe a potential MR tracer for tissue perfusion studies. Two biocompatible fluids were studied with a view to be used as delivery media for hyperpolarized xenon injection: the carrier agents were ¹²⁹Xe micro-bubbles in Echovist (2–3 μm in diameter), and Intralipid ¹²⁹Xe suspension. Xenon chemical shifts and longitudinal relaxation time T₁ were measured at 2.35 T in both fluids. Xenon chemical shift of the dissolved phase in Echovist was 204.1 ± 0.5 ppm from the micro-bubbles gas phase resonance data (0 ppm). Xenon T₁ was 20.0 s in micro-bubbles in Echovist and 19.0 s for the dissolved phase. Xenon chemical shift in Intralipid was 194.6 ± 0.5 ppm. T₁ was 15.2 ± 4.9 s (n = 5) in Intralipid 20 % and 20.9 ± 2.9 s (n = 4) in Intralipid 30 %. Using an intra-carotid injection of a small volume (0.15 mL) of hyperpolarized xenon dissolved in Intralipid 30 %, cerebral blood flow was measured in rats (160 ± 30 mL·(100 g)^–1·min^–1, n = 10). Rat brain xenon images were performed with 2-D projection–reconstruction pulse sequence, enabling regional blood flow measurements.     

Separation and continuous determination of the light rare earth elements and thorium in Baotou Iron Ore by a micro-column

A method for continuous determination of the light rare earth elements (LREEs) and thorium in Baotou Iron Ore was established. The light rare earths and thorium were adsorbed on a micro-column packed with HD-8 cation exchange resins. The light rare earth elements were eluted with 4 mol L⁻¹ HCl–2 mol L⁻¹ NH₄Cl solution and determined with tribromo-arsenzao by a 721-E spectrophotometry at 630 nm; thorium was eluted with 5% potassium oxalate solution and determined with Arsenazo III by a 721-E spectrophotometry at 660 nm. The measured values by the proposed method were in close agreement with the certified values (Baotou main ore standard sample, Baotou ore R-715 standard sample and GSD-2 standard sample). The RSD of the light rare earths and thorium in Baotou Iron Ore were of <1.70% and <1.99%, respectively.     

Impact of solvent type,solvent-water concentration,and number of stages on the extraction of coumarin mixture from tamanu (Calophyllum inophyllum) oil and its antioxidant activity

Natural products have been receiving the spotlight from the people of developing and developed countries in recent years due to rising health care expenses and global financial crises. These natural products are the resources for bioactive compounds used in the drug development process. Tamanu seed oil is used for traditional remedies and cosmetic ingredients. The dried seed produces an oil with a yield of 50–75 %. Previous works reported that the seed oil comprised coumarins, one of the eminent groups of phenolics. Coumarins have anticancer, antimicrobial, anti-inflammatory, anticoagulant, antiviral, wound healing properties, and anti-HIV effects. Extraction is often referred to as the sample preparation method as its essential to purify bioactive compounds. In this work, coumarin mixture from tamanu oil was extracted by batchwise multi stages extraction. The effects of solvent used (methanol and ethanol), solvent–water concentration, and the number of stages were studied. The optimal conditions for the extraction of the coumarin mixture were 90 % ethanol and eight stages of extraction, which contributed to 50.73 ± 0.16 % of purity and 92.95 ± 3.76 % of recovery. Also, these conditions removed up to 66 % free fatty acids (FFA) and 100 % triglycerides (TG). It was found that the DPPH inhibition at 400 ppm shows that 90 % ethanol has the highest inhibition (57.72 ± 2.70 %) with an IC₅₀ value of 305 ppm. Moreover, various compounds like pyrrole-2 carboxylate, epicrinamidine, cholestane, and hydroxysclerodin trimethyl ether were also detected in the polar fraction of tamanu oil.     

Validation of scanning electron microscope (SEM), energy dispersive X-ray (EDX) and gamma spectrometry to verify source nuclear material for safeguards purposes

Ten ore samples, two unpurified yellow cake samples and natural uranyl nitrate hexahydrate sample were analyzed by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray (EDX) method to verify source nuclear material. Samples represent source nuclear material as possible. All samples were scanned at ideal conditions; working distance = 10 mm, voltage = 30 kV, magnification value = × 100, spot size = 50 to screen samples for the presence of uranium and thorium, Also Hyper pure germanium (HPGe) gamma spectrometers were applied to estimate the uranium and thorium contents in Bq/kg (ppm). For the ore samples uranium-238 ranges from 1,049.23 Bq/kg (85.30 ppm) to 2,096.06 Bq/kg (170.41 ppm), uranium-235 ranges from 47.51 to 105.61 Bq/kg and thorium-232 ranges from 22.84 Bq/kg (5.65 ppm) to 41.78 Bq/kg (10.34 ppm). For the yellow cake samples and uranyl nitrate hexahydrate uranium-238 ranges from 42.99 Bq/kg (3.50 ppm) to 71,887.2 Bq/kg (5,844.49 ppm) and thorium-232 is 4.78 Bq/kg (1.83 ppm) and the other two samples are lower than the detection limit.     

Determination of optimum process conditions for solvent extraction of thorium using Taguchi method

Solvent extraction of thorium was studied using Taguchi method. The effect of various parameters such as acid types (sulfuric, nitric, hydrochloric, sulfuric + nitric) and their concentrations from 0.001 to 4 M, initial thorium concentration (0.0001, 0.001, 0.01, 0.1 M) and solvent type (TBP, D₂EHPA, Cyanex921, Cyanex272) in the ranges of 0.001 to 1 M on thorium extraction efficiency were investigated. The maximum extraction of thorium was obtained while 0.001 M hydrochloric acid, 0.001 or 0.01 M thorium and Cyanex272 were used. Under these optimum conditions, the extraction percent and distribution coefficient of thorium were 98.7% and 73.8, respectively. Compared with the hydrochloric aqueous solution, the nitric acid system showed less variation in the extraction of thorium. The proposed process has been applied for the separation of Th(IV), U(VI), La(III), and Ce(III) from synthetic solution same as thorium ores (monazite).     

Precise thermal ionization mass spectrometric measurements of 142Nd/144Nd and 143Nd/144Nd isotopic ratios of Nd separated from geological standards by chromatographic methods

A chromatographic separation technique for ¹⁴²Nd/¹⁴⁴Nd and ¹⁴³Nd/¹⁴⁴Nd isotope ratio measurements is established and applied to the analyses of geological standards of basaltic compositions (BCR-2, BIR-1) using Isoprobe-T TIMS. The instrument was tested for reliability and reproducibility to measure Nd isotope composition using the synthetic standard JNdi-1. The techniques were also applied to a carbonatite lava sample, OL-6, Oldoinyo Lengai, to check the validity of method for carbonatite matrix. The isotope ratios of ¹⁴³Nd/¹⁴⁴Nd for synthetic Nd standard JNdi-1, geological standards BCR-2, BIR-1, and carbonatite lava sample OL-6 obtained by these methods are in good agreement with previously published data. The ¹⁴³Nd/¹⁴⁴Nd values for JNdi-1 and BCR-2 have an external precision of ±13 ppm and ±15 ppm (2σ), respectively. The JNdi-1 and BCR-2 data for ¹⁴²Nd/¹⁴⁴Nd has an external precision of ±12 ppm and ±8 ppm (2σ), respectively. The ¹⁴²Nd/¹⁴⁴Nd composition of the two geological standards BCR-2 and BIR-1 are indistinguishable from synthetic mono-element standard JNdi-1, and they all fall within the 12 ppm (2σ) envelope of external precision. The external reproducibility is sufficient to distinguish and resolve 20 ppm anomalies in ¹⁴²Nd/¹⁴⁴Nd values.     

Extraction studies of uranium into a third-phase of thorium nitrate employing tributyl phosphate and <Emphasis Type="Italic">N,N</Emphasis>-dihexyl octanamide as extractants in different diluents

Extraction behavior of 1 × 10⁻²–0.1 M U(VI) from aqueous phases containing 0.86 M Th(IV) at 4 M HNO₃ in 1.1 M tributyl phosphate (TBP) and 1.1 M N,N-dihexyl octanamide (DHOA) solutions in different diluents viz. n-dodecane, 10% 1-octanol + n-dodecane, and decahydronaphthalene (decalin) was studied. Third-phase formation was observed in both the extractants using n-dodecane as diluent. There was a gradual decrease in Th(IV) concentration in the third-phase (heavy organic phase, HOP) with increased aqueous U(VI) concentration [0.71 M (no U(VI))–0.61 M (0.1 M U(VI)) for TBP; 0.27 M (no U(VI))–0.22 M (0.1 M U(VI)) for DHOA]. The HOP volume in case of DHOA was ~2.2 times of that of TBP. Uranium concentration in HOP increased with its initial concentration in the aqueous phase [from 1.8 × 10⁻² M (0.01 M U(VI))–0.162 M (0.1 M U(VI)) for TBP; from 1.4 × 10⁻² M (0.01 M U(VI))–0.14 M (0.1 M U(VI)) for DHOA] suggesting that Th(IV) was being replaced by U(VI). An empirical correlation was developed for predicting the concentrations of uranium and thorium in HOP for both the extractants. No third-phase appeared during the extraction of uranium and thorium from the aqueous phases employing 10% 1-octanol + n-dodecane, or decalin as diluents, and therefore, were better choices as diluent for alleviating the third-phase formation during the reprocessing of spent thorium based fuels, and for the recovery of thorium from high-level waste solutions.     

Uranium,thorium and potassium occurrences in the vicinity of hot springs in the northern neotectonic belt in the Eastern Cape Province,South Africa

Gamma ray measurements were carried out along two parallel lines close to each of the hot springs using a RS 125 spectrometer to find the concentration (ppm) of U, Th, and K at Polile Tshisa, Aliwal North, and Badfontein hot springs. The RS 125 spectrometer is auto-stabilized on the naturally occurring U, Th, and K, and provides concentrations (ppm) of the radioelements. The results show that the concentration of thorium is higher, and is below the world average hazardous threshold of 7.4 ppm. Thorium is related to the occurrence of monazite seen at the scanning electron microscope. Higher ratios of U/K are indicative of an increase of uranium relative to potassium. Binary diagrams (Th–U, K–U, and K–Th) do not show a clear best fit except at Polile Tshisa hot spring where thorium shows a quasi positive correlation to potassium. In general, it can be concluded that the concentrations of these three radioelements are quite low, acceptable for groundwater, and could be hazardous to the health of humans and animals if exposed to long time radiations.     

Thorium determination in water samples by liquid scintillation counting after its separation by cloud point extraction

The aim of this study is the separation and pre-concentration of thorium from aqueous solutions by cloud point extraction (CPE) and its the radiometric determination by liquid scintillation counting (LSC). For CPE, tributyl phosphate (TBP) was used as the complexing agent and (1,1,3,3-Tetramethylbutyl)phenyl-polyethylene glycol (Triton X-114) as the surfactant. The radiometric measurements were performed after phase separation by mixing of the surfactant phase with the liquid scintillation cocktail. The effect of experimental conditions such as pH, ionic strength (e.g. [NaCl]) and the presence of other chemical species (e.g. Ca²⁺ and Fe³⁺ ions, and humic acid colloids) on the CPE separation recovery have been investigated at constant reactant ratio (m(TBP)/m(Triton) = 0.1). According to the experimental results the maximum chemical recovery is (60 ± 5)% at pH 3. Regarding the other parameters, generally Ca²⁺ and Fe³⁺ ions as well as the presence of colloidal species in solution (even at low concentrations) results in significant decrease of the chemical recovery of uranium. On the other hand increasing NaCl concentration leads to enhancement of chemical recovery. Generally, the method could be applied successfully for the radiometric determination of thorium in water solutions with relatively increased thorium content.