水溶性磺酸钠苯基卟啉及其金属配合物共价与非共价修饰多壁碳纳米管的研究

合成了meso-四(4-磺酸钠苯基)卟啉及其Zn, Cu, Mn配合物, 通过共价与非共价的方法将其分别修饰到多壁碳纳米管上. 采用红外光谱对产物结构进行表征|通过透射电镜(TEM)考察了卟啉-多壁碳纳米管复合物的形貌特征|通过紫外光谱、荧光光谱对比分析了两类复合物, 发现在卟啉与多壁碳纳米管之间存在较强的电子效应, 同时发现非共价修饰的卟啉-碳纳米管复合物的荧光淬灭率更高|热重分析(TGA)表明非共价的卟啉-碳纳米管复合物中卟啉的含量比较高. 对修饰后的复合物进行了溶解性测试, 结果表明共价修饰的复合物在水中有较好的溶解性和分散性.     

金属卟啉有机共价和非共价修饰多壁碳纳米管

合成了5-(4-羟基苯基)-10,15,20-三苯基卟啉锌配合物, 与活化的多壁碳纳米管(MWNT)发生酯化反应, 从而得到金属卟啉有机共价化学修饰的多壁碳纳米管复合物; 利用金属卟啉环上的π电子与多壁碳纳米管管壁上的π电子通过π-π堆积效应, 得到金属卟啉有机非共价修饰的多壁碳纳米管复合物. 通过透射电镜(TEM)考察了金属卟啉-多壁碳纳米管复合物的形貌特征; 通过红外光谱对产物的化学结构进行了表征; 通过紫外光谱、荧光光谱和热失重分析(TGA)对比分析了两类复合物, 发现非共价修饰的金属卟啉-碳纳米管复合物的荧光淬灭率更高, 非共价修饰的金属卟啉-碳纳米管复合物中卟啉的含量比较高.     

金属卟啉化学共价和非共价修饰多壁碳纳米管

合成了5-(4-羟基苯基)-10,15,20-三苯基卟啉锌配合物,与活化的多壁碳纳米管(MWNT)发生酯化反应,从而得到金属卟啉有机共价化学修饰的多壁碳纳米管复合物;利用金属卟啉环上的π电子与多壁碳纳米管管壁上的π电子通过π-π堆积效应,得到金属卟啉有机非共价修饰的多壁碳纳米管复合物.通过透射电镜(TEM)考察了金属卟啉-多壁碳纳米管复合物的形貌特征;通过红外光谱对产物的化学结构进行了表征;通过紫外光谱、荧光光谱和热失重分析(TGA)对比分析了两类复合物,发现非共价修饰的金属卟啉-碳纳米管复合物的荧光淬灭率更高,非共价修饰的金属卟啉-碳纳米管复合物中卟啉的含量比较高.     

非离子表面活性剂对多壁碳纳米管在乙醇中高浓度分散的作用

如果能在无需聚合物或共价官能团辅助的条件下, 将多壁碳纳米管(MWNTs)高浓度地分散在乙醇中, 那么向各种复合材料引入MWNTs的过程就会更加便捷. 为此, 制备了多种含有表面活性剂的多壁碳纳米管乙醇悬浮液并对比考查了它们的稳定性. 非离子表面活性剂Triton X-100 和Tween 65显示出了在乙醇中分散悬浮高浓度MWNTs的能力, 能够使1.0 g·L-1 MWNTs乙醇悬浮液的上层清液经240 h后浓度仍分别在0.50和0.35 g·L-1以上. 这样长时间稳定的、没有聚合物或共价官能团辅助的MWNTs乙醇悬浮液, 其浓度比文献报道的值高. 进一步探讨了这些非离子表面活性剂分子结构对于分散MWNTs的优势, 并直观给出了其吸附于碳纳米管表面的可能形式. X射线光电子能谱和透射电子显微镜的表征结果都证实了表面活性剂分子吸附于碳纳米管表面.     

meso-四(4-酰肼基苯基)卟啉及其金属配合物共价和非共价修饰多壁碳纳米管

采用新方法合成了meso-四(4-酰肼基苯基)卟啉及其金属配合物, 通过化学键将酰肼卟啉上的酰肼基与活化的多壁碳纳米管(MWNTs)发生酰胺化反应, 从而得到卟啉共价化学修饰的多壁碳纳米管复合物; 利用卟啉环上的π电子与多壁碳纳米管管壁上的π电子通过π-π堆积效应, 得到卟啉非共价化学修饰的碳纳米管复合物. 通过红外光谱、紫外和荧光光谱对比分析, 发现在卟啉与碳纳米管间存在强烈的电子效应, 且非共价修饰的卟啉-碳纳米管复合物的荧光猝灭率更高.     

非共价修饰碳纳米管/二氧化钛复合材料的合成及性能

采用溶胶-凝胶法在聚乙烯吡咯烷酮(PVP)非共价修饰的碳纳米管表面均匀沉积二氧化钛粒子制得纳米复合材料。用TEM、XRD、FTIR、N2吸脱附等对复合材料进行了表征。结果表明:纳米二氧化钛纳米粒子均匀沉积在被修饰碳纳米管表面,且二氧化钛为纯锐钛矿晶体结构,没有金红石和板钛矿相。非共价修饰碳纳米管/二氧化钛复合材料具有良好的介孔结构,其孔径分布主要集中在6～10 nm,且比表面积与纯的二氧化钛相比明显增大,在紫外光照射下降解亚甲基蓝,相比纯的二氧化钛和碳纳米管/二氧化钛,具有较高的催化活性。     

碳纳米管的快速糖基化及用于糖-凝集素特异性识别作用的研究

将含糖基的简单两亲分子N-十八烷基麦芽糖酰胺(N-n-Octadecyl-D-maltonamide, NOMA)非共价修饰到单壁碳纳米管(SWNT)表面形成糖-碳纳米管复合体(NOMA-SWNT), 谱学和形态学结果表明, NOMA不仅能快速、高效地吸附到SWNT表面, 而且能有效地改善SWNT在水溶液中的分散性能. 以NOMA-SWNT管束为导通沟道构建了碳纳米管场效应管(CNTFET)器件, 检测了麦芽糖和伴刀豆凝集素蛋白(Con A)的特异性识别作用. 检测器件在每个修饰阶段的电学性能的变化证明了NOMA对SWNT的非共价糖基化修饰及用CNTFET来检测糖-凝集素特异性识别作用的可能性.     

聚醚醚酮/含萘聚芳醚酮改性碳纳米管复合材料的制备及性能

制备了一种含萘聚芳醚酮(Nap-PAEK),以其作为表面修饰剂对多壁碳纳米管填料进行了表面包覆.采用包覆后的多壁碳纳米管与聚醚醚酮(PEEK)进行物理共混得到一系列聚醚醚酮/碳纳米管复合材料,并研究其力学性能和热性能.研究结果表明,由于含萘聚芳醚酮与多壁碳纳米管之间存在较强的π-π相互作用,因此较好地改善了多壁碳纳米管在溶液和树脂基体中的分散性.修饰后的多壁碳纳米管在N-甲基吡咯烷酮(NMP)溶液中的分散量较修饰前提升了10倍,而采用修饰后的多壁碳纳米管制备的聚醚醚酮复合材料,在碳纳米管添加量仅为2%(质量分数)时,复合材料较纯PEEK树脂的拉伸强度和断裂伸长率分别提高了14. 5%和116. 7%,实现了对聚醚醚酮树脂的同步增强增韧效果,而且复合材料的耐热性能也有较大提升.     

聚碳酸酯修饰多壁碳纳米管的制备和表征

为了制备聚合物/碳纳米管复合物,采用聚碳酸酯修饰了多壁碳纳米管。选择聚碳酸环氧丙烷己内酯,聚碳酸亚丁酯己内酯和聚碳酸亚丙酯马来酸酐酯三种聚碳酸酯修饰多壁碳纳米管,仅仅碳酸环氧丙烷己内酯修饰的碳纳米管复合物可分离得到可溶解性产物。分别采用红外光谱、扫描电镜和透射电镜表征了碳纳米管的表面修饰基团及形貌。热重分析表明,可溶解聚碳酸环氧丙烷己内酯修饰多壁碳纳米管相对接枝了较多的聚合物,因此促进了碳纳米管的溶解性,可能是因为聚碳酸环氧丙烷己内酯具有较多的端羟基提高了修饰接枝效果。可溶解聚碳酸环氧丙烷己内酯修饰多壁碳纳米管接枝了生物活性的部分,并具有一定溶解性,在药物载体领域将具有潜在用途。     

复合修饰电极测定p-硝基苯酚新方法的研究与探讨

将多壁碳纳米管分散在孔雀绿溶液中并滴涂在玻碳电极表面,再电聚合一层孔雀绿膜,制备了一种新型的聚孔雀绿/多壁碳纳米管复合膜修饰玻碳电极.用电化学方法对所制得的复合修饰电极进行了表征,并研究了p-硝基苯酚在该电极上的电化学行为.结果表明,所制备的复合修饰电极对P-硝基苯酚有良好的电催化作用,从而建立了一种直接测定P-硝基苯...     

吸附于银胶颗粒表面的胆红素及胆绿素分子吸附取向研究

胆红素、胆绿素作为重要的生物小分子被广泛研究。本文采用表面增强拉曼光谱技术获得了胆红素和胆绿素分子吸附于银胶颗粒表面的拉曼光谱。通过对其谱带的指认分析,表明胆红素形成了三对内氢键,并以其两个吡咯亚甲基酮环沿银胶颗粒表面切向方向镶嵌在银胶颗粒上,而胆绿素则以顺式－顺式－顺式构型平躺吸附于银胶颗粒表面。     

Voltammetric Detection of Ofloxacin in Human Urine at a Congo Red Functionalized Water‐Soluble Carbon Nanotube Film Electrode

A simple physical method was developed for the surface modification and the solubilization of MWNTs in water by Congo red. The resulting water‐soluble MWNTs (MWNTs‐CR) can form stable and uniform films on solid supports when dried, which was used to fabricate MWNTs‐CR modified glassy carbon electrodes (MWNTs‐CR/GCE). Voltammetric studies showed that MWNTs‐CR/GCE exhibited a strong enhancement effect on the electrooxidation of ofloxacin. MWNTs‐CR films were also proved to possess overwhelming advantages as electrochemical sensing films over other commonly used MWNTs composite films (e.g., MWNTs‐DHP and MWNTs‐Nafion), reflected by the higher oxidation current, lower background and stronger accumulation capacity towards less soluble species. The sensitive oxidation of ofloxacin at MWNTs‐CR/GCE was used for the determination of ofloxacin. Under optimal conditions, the oxidation current was proportional to ofloxacin concentration in the ranges of 5×10^?8–3.0×10^?5 M. The detection limit of 9×10^?9 M was obtained for 350 s accumulation at open circuit (S/N=3). This method was applied to the determination of ofloxacin in human urine and the result was satisfying.     

Track membrane with immobilized colloid silver particles

A method for modification of track membranes by immobilization of polymer complexes of colloid silver nanoparticles on the surface of microfiltration membranes was developed. The antimicrobial properties of track membranes modified with silver nanoparticles were tested on E. coli, Ps. aeruginosa, St. aureus, and B. cereus.     

功能化离子液体修饰多壁碳纳米管固定化Candida antarctic lipase B

将带不同阴离子（Br^-、BF₄^-、PF₆^-、H₂PO₄^-）的咪唑离子液体修饰改性的多壁碳纳米管（MWNTs）作为一种全新的载体通过物理吸附法固定化褶皱假丝酵母脂肪酶B（CALB）,对其酶学性能进行测试。并通过透射电镜、拉曼光谱、热重分析、X射线光电子能谱对修饰前后的MWNTs进行表征,研究材料表面修饰对酶学性能的影响。研究结果表明,经过离子液体表面修饰后的MWNTs固定化CALB具有更高的比活力,耐受性（高温、高pH值）、热稳定性和重复使用性也得到进一步增强;离子液体中不同的阴离子对修饰MWNTs固定化酶的酶学性能有显著影响,其中以PF₆^-为阴离子的固定化酶比活力最高,比未修饰的MWNTs提高了5倍。固定化酶的动力学参数分析表明离子液体的引入增强了酶与底物之间的亲和力,从而增强了酶的活性。     

血红蛋白在银溶胶上的表面增强喇曼光谱研究

表面增强喇曼光谱已广泛应用于物质分子在金属表面吸附的研究.人们发现,不仅无机物和有机小分子能产生SERS,而且生物分子,如核酸、色蛋白以及蛋白质均能产生SERS效应,并以此来研究生物分子-蛋白质的变性问题.     

溶剂效应制备核壳纳米银及荧光素金属增强荧光

直链或支链高分子可用来制备和稳定纳米材料,具有丰富羟基的高分子通过分子间和分子内氢键作用形成分子级别的"胶囊",用作生长纳米颗粒的模板[1].可溶性淀粉主要是直链淀粉,是由多个葡萄糖单元构成的含有丰富羟基的高分子,同时具有疏水性和亲水性[2].     

Impedance DNA Biosensor Using Electropolymerized Polypyrrole/Multiwalled Carbon Nanotubes Modified Electrode

In this paper, we present an electrochemical impedance‐based DNA biosensor by using a composite material of polypyrrole (PPy) and multiwalled carbon nanotubes (MWNTs) to modify glassy carbon electrode (GCE). The polymer film was electropolymerized onto GCE by cyclic voltammetry (CV) in the presence of carboxylic groups ended MWNTs (MWNTs‐COOH). Such electrode modification method is new for DNA hybridization sensor. Amino group ended single‐stranded DNA (NH₂‐ssDNA) probe was linked onto the PPy/MWNTs‐COOH/GCE by using EDAC, a widely used water‐soluble carbodiimide for crosslinking amine and carboxylic acid group. The hybridization reaction of this ssDNA/PPy/MWNTs‐COOH/GCE resulted in a decreased impedance, which was attributed to the lower electronic transfer resistance of double‐stranded DNA than single‐stranded DNA. As the result of the PPy/MWNTs modification, the electrode obtained a good electronic transfer property and a large specific surface area. Consequently, the sensitivity and selectivity of this sensor for biosensing DNA hybridization were improved. Complementary DNA sequence as low as 5.0×10^?12 mol L^?1 can be detected without using hybridization marker or intercalator. Additionally, it was found that the electropolymerization scan rate was an important factor for DNA biosensor fabrication. It has been optimized at 20 mV s^?1.     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

Functionalized multi‐walled carbon nanotubes with poly(N‐(2‐hydroxypropyl)methacrylamide) by RAFT polymerization

In this study, we grafted water‐soluble biocompatible polymer, poly(N‐(2‐hydroxypropyl)methacrylamide) (PHPMA), onto the surface of multi‐walled carbon nanotubes (MWNTs). The reversible addition‐fragmentation chain transfer (RAFT) agents, dithioesters, were successfully immobilized onto the surface of MWNTs first, PHPMA chains were then subsequently grafted onto MWNTs via RAFT polymerization by using dithioesters immobilized on MWNTs as RAFT agent. FTIR, XPS, ¹H NMR, Raman and TGA were used to characterize the resulting products and to determine the content of water‐soluble PHPMA chains in the product. The MWNTs grafted with PHPMA chains have good solubility in distilled water, PBS buffer, and methanol. TEM images of the samples provide direct evidence for the formation of a nanostructure that MWNTs coated with polymer layer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2419–2427, 2006     

Covalent assembly and micropatterning of functionalized multiwalled carbon nanotubes to monolayer-modified Si(111) surfaces

Multiwalled carbon nanotubes (MWNTs) covalently bound to monocrystalline p-type Si(111) surfaces have been prepared by attaching soluble amine-functionalized MWNTs onto a preassembled undecanoic acid monolayer using carbodiimide coupling. SEM analysis of these functionalized surfaces shows that the bound MWNTs are parallel to the surface rather than perpendicular. The voltammetric and electrochemical impedance spectroscopy measurements reveal that the electron transfer at the MWNT-modified surface is faster than that observed at a MWNT-free alkyl monolayer. We have also demonstrated that it is possible to prepare MWNT micropatterns using this surface amidation reaction and a "reagentless" UV photolithography technique. Following this approach, MWNT patterns surrounded by n-dodecyl areas have been produced and the local electrochemical properties of these micropatterned surfaces have been examined by scanning electrochemical microscopy. In particular, it is demonstrated that the MWNT patterns allow a faster charge transfer which is consistent with the results obtained for the uniformly modified surfaces.