Near-diffraction-limited diode laser arrays by wavelength beam combining

We demonstrate 35 W output peak power with M2 approximately 1.35 in both dimensions from a 100 element, 100 microm pitch slab-coupled optical waveguide laser diode array using wavelength beam combining.     

Ultralow-noise mode-locked optical pulse trains from an external cavity laser based on a slab coupled optical waveguide amplifier (SCOWA)

We report the generation of optical pulse trains with 8.5 fs timing jitter (10 Hz to 10 MHz) from a mode-locked semiconductor laser, with a slab coupled optical waveguide amplifier used as the gain element. This is, to our knowledge, the lowest residual timing jitter reported to date from an actively mode-locked laser.     

SOA-based actively mode-locked fiber ring laser by forward injecting an external pulse train

An actively mode-locked fiber ring laser based on cross-gain modulation (XGM) in a semiconductor optical amplifier (SOA) is demonstrated to operate stably with a simple configuration. By forward injecting an easily-generated external pulse train, the mode-locked fiber laser can generate an optical-pulse sequence with pulsewidth about 6 ps and average output power about 7.9 mW. The output pulses show an ultra-low RMS jitter about 70.7 fs measured by a RF spectrum analyzer. The use of the proposed forward-injection configuration can realize the repetition-rate tunability from 1 to 15 GHz for the generated optical-pulse sequences. By employing a wavelength-tunable optical band-pass filter in the laser cavity, the operation wavelength of the designed SOA-based actively mode-locked fiber laser can be tuned continuously in a wide span between 1528 and 1565 nm. The parameters of external-injection optical pulses are studied experimentally to optimize the mode-locked fiber laser.     

Passive mode-locking by use of waveguide arrays

A novel mode-locking technique is presented in which the intensity-dependent spatial coupling dynamics of a waveguide array is used to achieve temporal mode-locking in a passive optical fiber laser. By use of the discrete, nearest-neighbor spatial coupling of the waveguide array, low-intensity light can be transferred to the neighboring waveguides and ejected (attenuated) from the laser cavity. In contrast, higher-intensity light is self-focused in the waveguide and remains largely unaffected. Numerical studies of this pulse shaping mechanism (intensity discrimination) show that using current waveguide arrays and standard optical fiber technology produces stable and robust mode-locked soliton-like pulses.     

High power passively mode-locked Nd:YVO<Subscript>4</Subscript> laser using graphene oxide as a saturable absorber

We report on a passively mode-locked Nd:YVO₄ laser using a novel graphene oxide saturable absorber fabricated by vertical evaporation method. An 880 nm LD pump source was used to reduce the thermal load of the laser crystal. At the pump power of 7.4 W, 1.2 W average output power of continuous wave mode-locked laser with optical conversion efficiency of 16.2% was achieved. To the best of our knowledge, this is the highest output power of passively mode-locked solid-state laser using graphene oxide saturable absorber. The repetition rate of passively mode-locked pulse was 88 MHz with the pulse energy of 13.6 nJ.     

自启动被动锁模掺铒光纤激光器的研究

在非线性光纤环形镜非线性开关效应和块状半导体波导饱和吸收效应的共同作用下，实现了掺铒光纤激光器的自启动被动锁模，获得了十分稳定的锁模脉冲序列，观察到高次谐频锁模脉冲输出。分析了非线性光纤环形镜的非线性开关反射特性。     

电光腔倒空激光二极管抽运Nd∶YAG锁模激光器

设计了一个简单的直腔,将电光腔倒空与激光二极管端面抽运Nd∶YAG半导体可饱和吸收镜锁模激光器结合,实现了锁模脉冲的产生、放大和输出。在连续抽运功率5 W的条件下,获得了脉冲宽度为11 ps的锁模单脉冲输出和脉冲宽度为200 ns的调Q脉冲输出,腔倒空单脉冲能量为30 nJ,重复频率为10 Hz。连续锁模运转时单个锁模脉冲的能量约为2 nJ,利用腔倒空将单脉冲的能量提高了15 倍左右。文章详细讨论了腔倒空脉冲及调Q脉冲的产生机理,并分析了加在电光晶体上的高压电脉冲以及偏振片的偏振度对腔倒空脉冲及调Q脉冲的影响。     

Red picosecond pulses generated by frequency doubling a Raman amplified widely tunable 1.3 microm fiber ring laser

We generated 0.66 microm picosecond pulses by second-harmonic generation of the Raman amplified output of a 1.3 microm actively mode-locked fiber ring laser in a periodically poled potassium titanyl phosphate (PPKTP) waveguide. The ring laser produced 9 ps pulses at a 20 GHz repetition frequency, was tunable over 1284-1330 nm, and was based on a semiconductor optical amplifier and a Mach-Zehnder amplitude modulator. The Raman amplifier served both to amplify the ring laser and to compress the pulses as solitons. The spectral flexibility of the amplifiers and the modulator should enable similar configurations to be made at other wavelengths and facilitate efficient frequency doubling in waveguides to other visible wavelengths.     

Passively mode-locked glass waveguide laser with 14-fs timing jitter

Ultralow jitter pulse trains are produced from a passively mode-locked, erbium/ytterbium co-doped, planar waveguide laser by use of high-bandwidth feedback control acting on the physical cavity length and optical pump power. Synchronization of a 750-MHz, fundamentally mode-locked laser to an external clock signal yields an ultralow, root-mean-square relative timing jitter of 14.4 fs integrated from 10 Hz to the Nyquist frequency of 375 MHz.     

Figure-eight actively-passively mode-locked erbium-doped fiber laser

The advantages of using nonlinear optical loop mirror (NOLM) to compress pulse with slight amplitude fluctuation and reflected energy loss are analyzed in theory. Experimentally the NOLM is placed in an actively mode-locked erbium-doped fiber ring laser to form a figure-eight actively and passively mode-locked fiber laser. 12 ps mode-locked pulses centered at 1.543 μm were obtained with the modulation frequency of 2.498748700 GHz. 3.715 mW output power is achieved with 50 mW pump power.     

Impacts of operational parameters on nonlinear polarization rotation-based passively mode-locked fiber laser

The operational parameters including the polarization controlling and the pump power in a nonlinear polarization rotation-based passively mode-locked fiber laser are studied in this paper.The carrier rate equations of the activated erbium-doped fiber are first employed together with the nonlinear Shro¨dinger equations to reveal the relation between the operational parameters and the output state of the passively mode-locked fiber laser.The numerical and experimental results demonstrate that the output state of the mode-locked laser varies with the polarization controlling and the pump power.The periodicity of the polarization controlling is observed.With given pump power,there exists a set of polarization controlling under which the ultra-short pulse can be generated.With given polarization controlling,the mode-locked state can be maintained generally except for some particular values of pump power.Three shapes of the output optical spectra from the fiber cavity can be identified when the pump power changes.The results in this paper provide a comprehensive insight into the operation of the nonlinear polarization rotation-based passively mode-locked fiber laser.     

Measurement of the nonlinear optical response of optical fiber materials by use of spectrally resolved two-beam coupling

We present measurements of the femtosecond nonlinear response of fiber waveguide materials, obtained with spectrally resolved two-beam coupling. This simple but sensitive technique provides all the parameters that characterize the third-order nonlinear optical response, including the dynamics. Measurements are made with nanojoule-energy pulses from a mode-locked Ti:sapphire laser and a few millimeters of waveguide preform, without the need for drawing fiber.     

Pulse-amplitude-equalized output from a rational harmonic mode-locked fiber laser

We report, for the first time to our knowledge, the demonstration of amplitude equalization of high-repetition-rate pulses generated from a rational harmonic mode-locked Er-doped fiber laser. The output pulses are injected into another fiber laser with a nonlinear optical loop mirror. This scheme provides pulse-amplitude equalization up to the ninth rational harmonic mode-locked pulse train.     

Design optimization of all-optical actively mode-locked ring laser based on cross-gain modulation in a semiconductor optical amplifier

A complete and detailed model is presented that describes the main physical phenomena that occur in an actively mode-locked fiber ring laser based on cross-gain modulation in a semiconductor optical amplifier employed as both the gain medium and mode-locking element. The relationship between key laser parameters and the output pulse characteristics is numerically analyzed to provide simple design rules and derive a set of necessary operational conditions. The adoption of these rules and the satisfaction of these conditions enables the optimization of the laser performance and the generation of short and high energy mode-locked output pulses.     

Tunable 19 × 10 GHz L-band FP-SOA based multi-wavelength mode-locked fiber laser

We present a multi-wavelength mode-locked fiber ring laser incorporating a semiconductor optical amplifier (SOA) and a Fabry-Perot semiconductor optical amplifier (FP-SOA). Because the gain of the SOA is depleted by an external injection optical signal, the SOA acts as a loss modulator. The FP-SOA serves as a tunable comb filter. The presented laser source can generate 19 synchronized wavelength channels with the extinction ratio of about 21 dB, each mode-locked at 10 GHz, and mode-locked pulse width is about 40 ps. Oscillation wavelengths band can be tuned by adjusting the bias current of the SOA, and wavelength spacing also can be changed by using a tunable optical delay line (ODL) or a temperature controller. The polarization-insensitive devices ensure that the output power is rather stable. This fiber laser has potential applications in longer waveband (L-band) within the low-attenuation window.     

Passive mode-locked Nd:YVO<Subscript>4</Subscript> laser using a multi-walled carbon nanotube saturable absorber

We report a passive mode-locked Nd:YVO₄ laser pumped by 880 nm LD using a transmission-type multi-walled carbon nanotube saturable absorber. At the pump power of 6.1 W, the average output power of 0.8 W of continuous wave mode-locked laser with optical conversion efficiency of 13.1% was generated. The repetition rate and pulse energy of the mode-locked pulse were 88 MHz and 9.1 nJ, respectively.     

Bright and dark 40 GHz parabolic pulse generation using a picosecond optical pulse train and an arrayed waveguide grating

We demonstrate parabolic optical pulse generation by manipulating the intensity and phase of individual longitudinal modes of a 40 GHz picosecond optical pulse train in the spectral domain. Bright and dark parabolic pulses were generated from a 40 GHz mode-locked fiber laser using a 64-channel arrayed waveguide grating pulse shaper. The obtained parabolic pulse, which can easily generate a linear chirping, is useful for a number of applications to optical signal processing applications, including pulse compression and time-domain optical Fourier transformation.     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

8字形腔波长可调谐锁模脉冲光纤激光器

采用非线性光纤环形镜加脉冲锁模技术及可调谐光纤光栅滤波器,对8字形腔被动锁模掺铒光纤激光器进行了波长可调谐输出的实验研究.在EDFA抽运光功率一定的情况下,通过调节偏振控制器和可调谐光纤光栅滤波器,获得了光谱稳定、重复频率1.1 MHz、输出功率起伏小于0.8 dBm、中心波长在1 548~1 570 nm内连续可调的短脉冲输出.该激光器可实现自启动锁模,且长时间稳定工作无需任何调整.     

Generation of 10-GHz ultra-short pulses with low time jitter in an actively mode-locked fiber laser

We have experimentally achieved the 8.3-ps ultra-short pulse at 10 GHz repetition rate with the time jitter as low as 590 fs in an actively mode-locked fiber ring laser. The ring-cavity laser is mode-locked by a semiconductor optical amplifier based on cross-gain modulation. The external CW source is modulated with radio frequency signal by an amplitude modulator as the external optical pulses and, then, injected into the fiber ring cavity to achieve active mode locking. Further investigating the laser output characteristics, it indicates that the linewidth of employed CW source affects properties of the generated ultra-short pulse, such as phase noise and time jitter. Ultra-short pulse at high repetition rate with low time jitter can be generated by the optimization of CW laser source.